Which of the following is the reason why an engineer creates a model of something he or she plans to build?
It is easier to modify smaller products than large ones.
It allows the engineer to test limitations in a controlled setting without the full-scale time and cost of the actual product.
It is easier to store smaller-scale models than to have a full-scale project.
Exact dimensions are usually not available during the test phase.

Answers

Answer 1

Answer:

It produces plans that help turn resources into desirable products or systems. Design ... What are the 3 stages of the engineering design process? ... Create or make ... Engineer Design Process... Model or prototype ... These experiments will allow the team to test and observe the design in a working environment.

Explanation:

Answer 2

Answer: It allows the engineer to test limitations in a controlled setting without the full-scale time and cost of the actual product

Explanation:

trust


Related Questions

Why would an aerospace engineer limit the maximum angle of deflection of the control surfaces?

Answers

It has the same limit of each angle

What are some tasks commonly performed in Environmental Service Systems jobs? Check all that apply.
inspecting facilities
measuring trees
sorting recyclable materials
using laboratory equipment
harvesting natural resources
using computers
tending animals on a farm
planting crops

Answers

Answer: a,c,d,f

Explanation:

Answer:

Inspecting facilities

sorting recyclable materials

using laboratory equipment

using computers

Explanation:

Got it right on edge2021

Question #4
Multiple Choice
Which option identifies the process used to study the designs in the following scenario?
Eliza is designing a cell phone case that is waterproof, sand-proof, and childproof. She would like to study other cell phone case designs before finalizing her own.

Answers

Answer:

Deconstruction

Explanation:

Answer:

deconstruction

Explanation:

I'm not 100% for sure so sorry if this is wrong

what resources did Margaret Hutchinson Rousseau use ?

Answers

Answer:

Explanation:

During the Second World War, she oversaw the design of production plants for the strategically important materials of penicillin and synthetic rubber.Her development of deep-tank fermentation of penicillium mold enabled large-scale production of penicillin.She worked on the development of high-octane gasoline for aviation fuel.Her later work included improved distillation column design and plants for the production of ethylene glycol and glacial acetic acid.

Handsaw teeth are very sharp: to avoid being cut by the teeth, keep hands and fingers well away from the
path of the blade

Answers

Handsaw teeth are very sharp: to avoid being cut by the teeth, keep hands and fingers well away from the
path of the blade
Yes, this seems logical

Welding is one process that allows you to join two pieces of metal. Choose the correct way to complete the sentences to explain the process of welding. Gas welding uses ____ as a source of fuel to generate the heat required to melt the metal. In arc welding, ______ is/are the source of energy to produce the heat.

Answers

Answer:

Fuel, Energy

Explanation:

Answer:

fuel and energy

Explanation:

2. In the above figure, what type of cylinder arrangement is shown in the figure above?
O A. In-line
O B. L-Type
O C. Horizontal
O D. V-Type

Answers

Answer: C. Horizontal

Explanation:
Remember engine layouts are usually characterized on their cylinder layout, valves and camshafts.

Types of engines:
•In-line engines have it’s cylinders arranged in a row (ex. In-line 4)

•V-Type engines have it’s cylinder banks are arranged at an angle to each other, so that the banks form a "V" shape when viewed from the front of the engine.

•Horizontal/flat engines have it’s cylinders located on either side of a central crankshaft. (ex. Boxer engine)

•L-Type engines, I’m going to be real I’ve never heard of a L-type layout and I don’t think it’s real.



The horizontal type of cylinder arrangement shown in the figure above option (C) is correct.

What is a cylinder?

In geometry, it is defined as a three-dimensional shape having two circular shapes at a distance called the height of the cylinder.

We know the volume of the cylinder is given by:

[tex]\rm V = \pi r^2 h[/tex]

It is given that:

The figure is shown in the picture.

Engine types: •In-line engines feature cylinders that are lined up in a row (ex. In-line 4)

•When viewed from the front of the engine, cylinder banks of V-Type engines are positioned at an angle to one another. This creates a "V" shape.

The cylinders of horizontal/flat engines are situated on each side of the central crankshaft. Example: Boxer engine

•L-Type engines, I'll be sincere An L-type layout is something I've never heard of, and I don't believe it exists.

Thus, the horizontal type of cylinder arrangement shown in the figure above option (C) is correct.

Learn more about the cylinder here:

brainly.com/question/3216899

#SPJ2

After one side of the stock is planed to a true surface, it is usually
best to:
a. Plane the stock to width.
b. Cut the stock to required length.
c. Plane one end square.
d. Plane the opposite face.

Answers

Answer:

Maybe your answer is B

What is the best reason a scientist might use a model to represent the solar system?

Answers

Answer:

The actual solar system is too large.

Answer:

The actual solar system is too large.

Explanation:

just did it

I have a keen eye and I compose all of the shots for a scene

Answers

Answer:

script supervisor

Explanation:

Engineers rely on many logistical principles in their project designs.
true or false ?

Answers

Answer:

True

Explanation:

Answer:

False

Explanation:

IM A DIFFERENT BREEED!!

1. The top of piston travel is called

Answers

Answer:

Crankshaft

Explanation:

instrument panel help please

Answers

Answer:

A. 4WD Low

B. 4WD High

C. Safety belt

D. Check gauge

E. Oil temperature gauge

F. Left turn indicator

G. Tachometer

H. High beams

I. Speedometer

J. Right turn indicator

K. Battery voltage gauge

L. Cruise control light

M. (can't see sorry)

N. Service engine soon

O. Battery warning light

P. Airbag indicator

Q. Anti-lock brake system

R. Fuel gauge

S. Parking brake (AKA emergency brake) on

T. Low windshield washer fluid

U. Check fuel cap

V. Door ajar/open

W. Shift indicator

X. Trip odometer reset

Y. Oil pressure gauge

Z. compass/cardinal direction indicator

AA. Odometer?

What’s one idea you have about how rescue workers can get energy to their electrical devices in these situations?

Answers

Answer:

They can get energy to their devices through natural sources of energy like the sun and wind.

Explanation:

When rescue workers are involved in missions, especially those that involve natural disasters, this could limit or totally eliminate their access to energy from electricity grid lines. When this occurs, they can still make use of the natural sources of energy around them, to power up their devices.

Some of these sources of energy include solar energy and wind energy. These natural sources have been known to power up some batteries. So the rescue workers can utilize them to get energy to their electrical devices.

Answer:

They can get energy to their devices through natural sources of energy like the sun and wind.

Explanation:

How do you articulate findings to your clients?

Answers

Answer:

Maintain eye contact, smile,nod and make clients feel that nobody is more important to you than them. Don't think about what you're going to say next. Be totally and extremely interested in what your client or prospect is saying. Then clients will like you because you are showing them respect.

Circuit breakers and disconnect switches are
examples of what

Answers

Answer: Energy-Isolating devices

Explanation:

Energy-isolating devices are used to restrict the flow or transmission of energy (electricity in this case) by physical means therefore it includes manually operated devices such as a manually operated electrical circuit breakers and disconnect switches.

Manually controlled circuit breakers restrict the flow of electricity if the current is too much and the flow will remain restricted until the switch is flipped back to allow electricity to flow while a Disconnect switch works by shutting down the circuit when a problem is detected.

How did studying pagodas help engineers create earthquake-proof structures in modern society?A. Engineers learned that the design was flawed, so they knew not to repeat it. B. Engineers learned that certain soil needed to be used. Engineers learned that perseverance pays off. C. Engineers learned which design would be most appropriate for the area where they were building.

Answers

engineers learned which design would be most appropriate for the area where they were building. which might be d.

.

1. Which of the following is an advantage of the one-story ranch design?
A. Minimal heating costs.
B. Economical to build.
I
C. It offers many opportunities for indoor-outdoor living.
D. Limited hall space.

Answers

I believe the answer is c

Which of the following statements are true of computer hardware engineers?

Answers

Answer:

you never mentioned the options

Successful students read on a ____ basis.

Answers

I think it is daily????

daily or it could also be regular

Carina has discovered a mixture of nutrients that can be added to soil to make plants grow larger and stronger. She would like to begin doing this kind of work professionally. Which career would be best for Carina?

Answers

Answer:

B

Explanation:

Answer:

Its B

Explanation:

2021 October 4 Age 13 Grade 7

What are some of the main causes of accidents?

Answers

Answer

Being drunk, texting, being distracted

Explanation:

Hope this helped.

Which one of the following wars or conflicts was fought over the use of slave labor in agriculture?

Answers

Answer:

American Civil War

Explanation:

Describe how something like a red blood cell might look to you.

Answers

You would not even see the whole blood cell, you are too small!

An engineer is designing an irrigation system to bring water to a farm. Which
statement describes the clearest criterion for the solution?

Answers

Answer:

“it must deliver 55 liters of water per minute when in use” literally just clicked it"

Explanation:

The irrigation system must deliver must deliver 55 L per minute when in use.

What is irrigation?

The term irrigation means the artificial supply of water to crops. This is one of the important ways by which farmers are able to shore up the production of crops all year round.

One prime consideration of nan engineer that is designing an irrigation system is that it must deliver 55 L per minute when in use. This speaks about the efficiency of the irrigation system.

Learn more about irrigation:https://brainly.com/question/22708021

#SPJ2

ITS FOR DRIVERS ED!!

the letters i need to unscramble are: e,i, r, i, d, l, p, v, r, n, e, g, i, g, i

Answers

I got “driving is a privilege”
Yeah I’m guessing its that as well ^

Complete the following sentence.
skills are very valuable in the engineering profession. If these skills are lacking, it can cause problems with time, cost, and
safety

Answers

Answer:

Communication

Explanation:

Answer:

communication

Explanation:

Which trait is shown when scientists ignore their personal bias while assessing an idea Thinking logically Creativity
Objectivity curiosity

Answers

Answer:

The correct option is;

Objectivity

Explanation:

Objectivity is related to the development a bias free understanding or ideology or making decision about an item or situation or occurrence based only on available evidence that can be verified without the influence of personal belief, attitude, thinking, point of view, mind or judgment as opposed to concluding subjectively

However, excluding personal point of view in coming to conclusion does not guarantee knowledge of the actual properties nature as more facts could be required to com to a correct conclusion.

Question 7 of 10
A team of engineers is asked to help a community improve local air quality.
What must the team do before it can begin to identify possible solutions?
A. Select one solution.
B. Model the solution.
O
C. Iterate to improve the solution.
d
D. Define the problem,
SUBMIT

Answers

Answer: Define the problem

Explanation: I just took the test

Oil is a powerful source of energy used for cars, machines, and many other purposes. While studying sources of energy that could replace the use of oil, a student thinks about solar power, wind power, nuclear power, and electric batteries. The students asks,"Which type of source will waste the least energy and provide the most energy in all situations?"

Which best describes why a scientist would ask a different question than this one?

A. The question asks about subjective personal preferences regarding energy.
B. The question focuses on the objective measurements of amounts of energy.
C. The question has too wide of a focus, as though all situations can be studied at once.
D. The question is focused on the future and finding new answers about changing needs.

Answers

Answer:

C

Explanation:

Other Questions
0.029 g in Scientific notation An advertising balloon shaped like a giant soda can is 15 feet tall and 7 feet wide. How many cubic feet of helium will be needed to fully inflate the balloon? 1.Explain what is happening to the movent of water?2.what happens to the size of the cell? Express the first number as a percentage of the second number. 29 pounds of recyclable trash in a barrel of 53 pounds of trash. The 29 pounds of recyclable trash is what % of the barrel of 53 pounds of trash. Why do you think the narrator has trouble remembering what happened? How does this affect believability of his story? Its from the Seventh Man Samantha was working on a Word document and the horizontal and vertical margins disappeared. Which solution will fix the problem? Close the Word document and reopen it. Click on the View Ruler button located at the top of the vertical scroll bar on the right-hand side of the screen. Double-click in the ruler area to redisplay the ruler. Click on the View Ruler button located at the top left-hand side of the screen that looks like an L. define radioactivity and write down properties of radioactive Ray's Quantitative data measures categories like color or movie genre.TrueFalse What is 4 raised to the second power What is the tallest mountain in the Appalachians, and what is its height? PLEASE HELP ALGEBRA 2!!! 5. Find the coordinates of G if F(-1,2) is the midpoint of GJ and J has coordinates (-5,9). Which statement is true about the culture in Australia and Oceania?O People have moved away from islands.O Oceans have always been a big part of life and traditions.O Traditional ways of life are no longer taught PLEASE HELP!! Which of the following computing devices would best address the needs for a CYBER SECURITY ANALYST? Help me please not good at math K is the midpoint of J and L, then find x.Given: JK = 5x - 3KL = 3x + 1 PLS HELPPPPPPPM=5N= -3Look at the problem attached Which of the following was an effect of the Boston year party The process of supplying water for crops is called What can fossils tell us about past species. Choose all that apply