Answer:
c. water is added to coffe until the solution becomes clear
Answer:
c
Explanation:
Water is added to coffee until the solution becomes
clear.
Please balance the equation, putting the correct coefficient in each box.
Do not leave any boxes blank! Enter "1" for formulas having a presumed
coefficient of 1.
Bi(OH)3 +
HNO3 →
H2O +
Bi(NO3)3
Answer: [tex]Bi(OH)_3+3HNO_3\rightarrow 3H_2O+Bi(NO_3)_3[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The balanced equation will be:
[tex]Bi(OH)_3+3HNO_3\rightarrow 3H_2O+Bi(NO_3)_3[/tex]
What is the major organic product obtained from the reaction of 2,2-dimethyl-1-propanol aqueous HBr at reflux
Answer:
See explanation
Explanation:
The mechanism involves SN1 nucleophilic substitution reaction. The -OH group of the alcohol is first protonated. Since water is a good leaving group, -OH2 leaves the substrate creating a primary carbo cation.
A 1,2 methyl shift now occurs to create a tertiary carbo cation which is more stable leading to the major product shown in the image attached to this answer.
forms of energy reflection
Answer:
any of these
Explanation:
kinetic energy: kinetic is motion, or released energy
Potential energy: porential energy is the energy of position or stored energy.
Thermal energy: is heat energy, it is stored energy that creats heat.
Which word best describes the relationship between polyps and algae
exoskeletal
Bleached
Photosynthetic
Symbiotic
Answer:
symbiotic
Explanation:
There like a close friendship
What a main difference between Earth and Jupiter?
A. Earth is an inner planet with a solid rock surface composition, while Jupiter is an outer planet with a gas surface composition.
B. Earth is an inner planet with a relatively long distance from the sun, while Jupiter is an outer planet with a relatively short distance from the sun.
C. Earth is an outer planet with a gas surface composition, while Jupiter is an inner planet with a solid rock surface composition.
D. Earth is an outer planet with a relatively short distance from the sun, while Jupiter is an inner planet with a long distance from the sun.
Answer: A. Earth is an inner planet with a solid rock surface composition, while Jupiter is an outer planet with a gas surface composition.
Answer: What a main difference between Earth and Jupiter?
Earth is an inner planet with a solid rock surface composition, while Jupiter is an outer planet with a gas surface composition.
Earth is an inner planet with a relatively long distance from the sun, while Jupiter is an outer planet with a relatively short distance from the sun.
Earth is an outer planet with a gas surface composition, while Jupiter is an inner planet with a solid rock surface composition.
Earth is an outer planet with a relatively short distance from the sun, while Jupiter is an inner planet with a long distance from the sun.
Explanation:
Using the van der Waals equation, determine the pressure exerted by 4.30 mol Ar in 3.6 L at 325K.
Answer:
37.7 atm
Explanation:
Using the relation;
(P + an^2/V^2) (V - nb) = nRT
(P + an^2/V^2) = nRT/(V - nb)
a = 0.0341 atm dm^2 Mol^2
b = 0.0237 dm/mol
P = nRT/(V - nb) - an^2/V^2
P = [4.3 * 0.082 * 325 / (3.6 - (4.3 * 0.0237))] - (0.0341 * (4.3^2))/(3.6^2)
P = 114.595/(3.498) - 0.0487
P = 37.7 atm
Consider the reaction 2H2(g)+O2(g)→2H2O(l) 2 H 2 ( g ) + O 2 ( g ) → 2 H 2 O ( l ) What is the mass of water, H2O(l) H 2 O ( l ) , produced when 5.70 g g of O2(g) O 2 ( g ) reacts with excess H2(g) H 2 ( g ) ?hen 5.70 g g of O2(g) O 2 ( g ) reacts with excess H2(g) H 2 ( g ) ?
Answer:
mH₂O = 6.4116 g
Explanation:
Let's write the given reaction:
2H₂ + O₂ -------> 2H₂O
The problem states that 5.7 g of oxygen reacts with excess hydrogen, hence, the limiting reagent is the oxygen. With this mass of oxygen, we can determine the moles, and then, the moles of water with the mole ratio:
moles = mass / atomic weight AW of O₂ = 16 g/mol
Replacing we have:
moles O₂ = 5.70 / (16 * 2)
moles O₂ = 0.1781 moles
According to the balanced reaction, 1 mole of Oxygen produces 2 moles of water, so we have a mole ratio 1:2, therefore the moles of water would be twice the moles of oxygen:
moles H₂O = 0.1781 * 2 = 0.3562 moles
Finally the mass of water can be calculated solving for the mass from the expression of moles, and using molecular mass of water:
m = moles * MM MM H₂O = 18 g/mol
m = 0.3562 * 18
mH₂O = 6.4116 gHope this helps
Rank the following compounds in order of increasing stability, putting the least stable first. Group of answer choices II < I < III I < II < III III < II < I III < I < II
Hello. You forgot and show the compounds. The compounds are in the attached image.
Answer:
I < II < III
Explanation:
The stability of the presented compounds must be analyzed, taking into account the free electrons to form arrangements between the atoms. In this case, the molecules of greater stability follow the concept of valence and are characterized as those that manage to reach a large number of elements that manage to obey the octet rule.
What is the difference between an introduced species and an invasive species?
Answer and Explanation:
The introduced species is, literally, a species that was introduced into an environment by human action. In other words, an introduced species is one that is not native to a region, does not occur naturally, but has been taken by humans to that region.
An invasive species, on the other hand, is one that was introduced naturally in an environment, but multiplied in a harmful way, causing a strong imbalance in the region.
Why do you think the reaction between tetraphenylcyclopentadienone and dimethyl acetylenedicarboxylate can be conducted at relatively lower temperature compared to the reaction between tetraphenylcyclopentadienone and diphenylacetylene?
Answer:
See explanation
Explanation:
The reaction between tetraphenylcyclopentadienone and dimethyl acetylenedicarboxylate as well as the reaction of tetraphenylcyclopentadienone and diphenylacetylene are Diels Alder reactions. The former is performed in presence of a solvent while the former is performed neat.
The reaction of tetraphenylcyclopentadienone and dimethyl acetylenedicarboxylate leads to the formation of a more resonance-stabilized aromatic ring(lower energy product) compared to the reaction of tetraphenylcyclopentadienone and diphenylacetylene.
Hence, the reaction between tetraphenylcyclopentadienone and dimethyl acetylenedicarboxylate can be conducted at relatively lower temperature compared to the reaction between tetraphenylcyclopentadienone and diphenylacetylene.
A) Suppose you separate a 3.02 g mixture of sand and salt. You recover 1.43 g of salt and 1.41 g of sand. What is the percent recovery of the mixture?
B) Suppose you separate a 3.02 g mixture of sand and salt. You recover 1.43 g of salt and 1.41 g of sand. What is the percent recovery of the mixture?
C) Calculate the percent by mass of a solution made from 15 g NaCl (the solute) and 69 g water.
D) What percent of 73.0 g is 26.1 g?
Answer:
A-B) 94 %.
C) 17.9 %.
D) 35.8 %.
Explanation:
Hello!
A-B) In this case, since the total mass of the mixture is 3.02 g and 1.43g+1.41g=2.84 g are recovered in total, we can compute the percent recovery as shown below:
[tex]\%rec=\frac{2.84g}{3.02g}*100\%\\\\\%rec=94\%[/tex]
C) Here, since the solution is made up of NaCl and water, we can say that the mass of the solution is 15g+69g=84g; thus, the percent by mass would be:
[tex]\%=\frac{15g}{84g}*100\%\\\\\%=17.9\%[/tex]
D) In this case, we simply divide 26.1 g by 73.0 g in order to obtain the percent:
[tex]\%=\frac{26.1g}{73.0g}*100\%\\\\\%=35.8\%[/tex]
Best regards!
The percentage in the cases are as follows;
A and B is; 94%C is; 17.9%D is; 35.8%Questions A and B are similar and can be solved as follows;
The total mass of the mixture is 3.02g.The recovered mass = 1.43g + 1.41g = 2.84g% recovery = (2.84/3.02) × 100%% recovery = 94%Question C can be solved as follows;
Total mass of solution = 15 + 69 = 84gMass of solute = 15g% by mass = (15/84) × 100%% by mass = 17.9%Question D can be solved as follows;
% = (26.1/73) × 100%% = 35.8%Read more:
https://brainly.com/question/24712879
How many moles in 2.33E25 molecules of NO?
0.0258 mol
3.87E20 mol
38.7 mol
2.58E48 mol
please show work
Answer:
0.0258 mol Answer .......
Ethical Behavior Worksheet Situation 1. You are taking a very difficult chemistry course, which you must pass to maintain your scholarship and to avoid damaging your application for graduate school. Chemistry is not your strong suit, and, because of a just-below-failing average in the course, you will have to receive a grade of 90 or better on the final exam, which is two days away. A janitor, who is aware of your plight, informs you that he found the master for the chemistry final in a trash barrel and has saved it. He will make it available to you for a price, which is high but which you could afford. What would you do?
Answer:
I would not accept it.
Explanation:
Although it is tempting to accept the janitor's offer and save the scholarship, which is not easy to get, I would not accept his offer, as I do not believe in victories based on dishonesty and would be heavy on conscience if I did the opposite. Obviously, I would not like to lose my scholarship and for that reason, I would look for other ways that would be honest and help me improve my grade. If I could not improve and lose the scholarship, I would be extremely sad, but I would be at peace with my conscience.
Consider the reaction between an alcohol and tosyl chloride, followed by a nucleophile. Write the condensed formula of the expected main organic product.
Answer:
RCl
Explanation:
Here, let us take ROH to represent the formula of our alcohol where R is the alkyl group.
The reaction of ROH with tosyl chloride yields an ester called a tosylate. It is the O-H bond not the C-O bond that is cleaved when the tosylate is formed.
Tosylates are good leaving groups, attack of a nucleophile such as Cl^- completes the mechanism leading to the formation of RCl.
PLS HELP ME WITH THIS ILL GIVE BRAINLIEST
Answer:
1 qualiative physical
2 qualiative chemical
3 quantitative physcial
4 quantiative chemical
5qualiative physcial
6quatiative chemcial
7quanatiative physcial
8 qualiative chemical
9quatliate physcial
What is the concentration of a Kl solution of 20.68 g of solute was dissolved in enough water to form 100. ml of solution?
Answer:
1.25M
Explanation:
Perform the following
mathematical operation, and
report the answer to the
appropriate number of
significant figures.
653.12 + 12.10247 = [?
Answer:
665.22
Explanation:
you see wich numbers after the decimal points have the least numbers, the one with the least u have to round your answer to that
After performing the required mathematical operation (addition), the answer is equal to 665.22.
What are significant figures?In Mathematics, significant figures can be defined as the number of single digits or numerical values in the coefficient of a mathematical expression that are important and meaningful.
Since "653.12" has two (2) significant figures, we must ensure that 12.10247 also has two (2) significant figures as follows:
12.10247 to 2 S.F = 12.10.
Next, we would perform the required mathematical operation (addition):
653.12 + 12.10 = 665.22.
Read more on significant figures here: https://brainly.com/question/24491627
#SPJ9
What volume of sulfur dioxide, SO2 (at STP), is
produced by the burning of 0.250 mole of sulfur?
S(s) + O2(g) → SO2(g)
Answer:
5.6 L is the final volume for SO₂ at STP condtions
Explanation:
The reaction is: S(s) + O₂ (g) → SO₂ (g)
Ratio for this reaction is 1:1, if we see stoichiometry.
1 mol of sulfur can react to 1 mol of oxygen in orden to produce 1 mol of sulfur dioxide.
Then, 0.250 moles of sulfur can produce 0.250 moles of SO₂.
If we solve this by a rule of three, we can say:
At STP 1 mol occupies 22.4L
Then, 0.250 moles will be contained at (0.250 mol . 22.4L) /1mol = 5.6 L
If we apply the Ideal Gases Law:
P . V = n . R . T
1 atm . V = 0.250 mol . 0.082 . 273K
V = (0.250 mol . 0.082 . 273K) / 1atm → 5.6 L
Answerroweo'gfnagnas;gns;BGr;kv
Explanation:
Question 8 of 25
What is alchemy?
O A. A scientific approach to research that uses observations and
measurements to test ideas
O B. An early form of chemistry that people used to try to turn metal
into gold
O c. A belief that chemistry forms the basis of all areas of science
O D. An ancient philosophy that taught that all matter was composed
of earth, fire, water, and air
SUBMIT
Alchemy is "an early form of chemistry that people used to try to turn metal into gold".
The development of a universal cure for illness, as well as the discovery of a way to indefinitely extend life, were the goals of mediaeval chemical research and speculative philosophy.
Boyle contributed to the evolution of chemistry from alchemy. He used the experimental approach from physics and applied it to chemistry. Boyle contributed to the comparison of these two fields of knowledge by demonstrating that chemistry is just as important to study as physics.
Therefore, the correct statement will be "An early form of chemistry that people used to try to turn metal into gold".
To know more about Alchemy
https://brainly.com/question/5997100
#SPJ1
Skin color variations were caused by:
a). The change in melanin, the skin's brown pigment
b). The climate of where people migrated to
c)Diets that are rich in Vitamin D
d) All of the above
I'm certain the answer is D: All of the above, but please correct me if I'm wrong ^^
Calculate how many grams of BeCl2 are required to produce 0.52 grams of MnCl2
Answer:
65.0cp
Explanation:
Calculate the number of moles of H2SO4 required to react with 0.93 moles of Al. Do not include units in your answer. Round to the tenths place or further.
Answer:
1.40 moles of H₂SO₄.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below below:
2Al + 3H₂SO₄ —> Al₂(SO₄)₃ + 3H₂
From the balanced equation above,
2 moles of Al reacted with 3 moles of H₂SO₄.
Finally, we shall determine the number of mole of H₂SO₄ required to react with
0.93 moles of Al. This can be obtained as follow:
From the balanced equation above,
2 moles of Al reacted with 3 moles of H₂SO₄.
Therefore, 0.93 moles of Al will react with = (0.93 × 3)/2 = 1.40 moles of H₂SO₄.
Thus, 1.40 moles of H₂SO₄ is needed for the reaction.
What is the molarity of a solution that contains 78.5 g of copper(II) chloride in 1.50 L of solution?
Answer:
0.389 M
Explanation:
From the question given above, the following data were obtained:
Mass of CuCl₂ = 78.5 g
Volume of solution = 1.50 L
Molarity of CuCl₂ =?
Next, we shall determine number of mole in 78.5 g of CuCl₂. This can be obtained as follow:
Molar mass of CuCl₂ = 63.5 + (35.5×2)
= 63.5 + 71
= 134.5 g/mol
Mass of CuCl₂ = 78.5 g
Number of mole of CuCl₂ =?
Mole = mass / Molar mass
Number of mole of CuCl₂ = 78.5 / 134.5
Number of mole of CuCl₂ = 0.584 mole
Finally, we shall determine the molarity of the solution. This can be obtained as follow:
Number of mole of CuCl₂ = 0.584 mole
Volume of solution = 1.50 L
Molarity of CuCl₂ =?
Molarity = mole / Volume
Molarity of CuCl₂ = 0.584 / 1.50
Molarity of CuCl₂ = 0.389 M
The molarity of a solution that contains 78.5 g of copper(II) chloride in 1.50 L of solution is 0.389M.
HOW TO CALCULATE MOLARITY?The molarity of a solution can be calculated
From the question given above, the following data were obtained:
Mass of CuCl₂ = 78.5 gVolume of solution = 1.50 LMolarity of CuCl₂ =?Next, we shall determine number of moles in 78.5g of CuCl₂. This can be obtained as follow:
Molar mass of CuCl₂ = 63.5 + (35.5×2)
= 63.5 + 71
= 134.5 g/mol
Mass of CuCl₂ = 78.5g
Number of mole of CuCl₂ = 78.5 / 134.5
Number of mole of CuCl₂ = 0.584 moles
The determine the molarity of the solution. This can be obtained as follow:
Number of moles of CuCl₂ = 0.584 molesVolume of solution = 1.50LMolarity of CuCl₂ =?Molarity = mole / Volume
Molarity of CuCl₂ = 0.584 / 1.50
Molarity of CuCl₂ = 0.389M
Therefore, molarity of a solution that contains 78.5 g of copper(II) chloride in 1.50 L of solution is 0.389M.
Learn more about molarity at: https://brainly.com/question/24650225
Explain why NO is more soluble in water than either N2 or O2. Fill in the following blanks.
a. Compared to nitrogen, the ____________of ethylene makes it more soluble in water.
b. The high solubility of sulfur dioxide can be explained by its ______________
c. Nitric oxide is more soluble than nitrogen and oxygen because of its ______________
d. Compared to oxygen, nitrogen's _____________ makes it more difficult for water molecules to surround the nitrogen molecules.
1. Polarity
2. Ability to react with water
3. Shorter bond length
4. Larger molecular size
Answer:
a. Larger molecular size
b. Ability to react with water
c. Polarity
d. Shorter bond length
Explanation:
Ethene is a larger molecule than oxygen and nitrogen hence it is more soluble than the both other gases .
SO2 dissolves readily in water to yield an acid solution. It is an acid anhydride.
Nitric oxide is a polar compound. It remains very much polar while nitrogen and oxygen are non polar.
Nitrogen is sp hybrized, this leads to a very short bond and does not easily interact with oxygen and nitrogen
Is energy absorbed or released during cellular respiration?
Absorbed
Released
Answer:
Released
Explanation:
they convert into a form of energy that can be used by cells
3. Noble gases are sometimes called "inert gases." What can you infer about the meaning of the word "inert" in chemistry?
Answer:
Noble gases are sometimes called "inert gases." What can you infer about the meaning of the word "inert" in chemistry? It refers to substances that easily lose electrons. It refers to substances that do not react with other substances. It refers to substances that have strong electrochemical charges.
Explanation:
1 In general, how many major glands are found in human body?
A. Eight
B. Ten
C! Thirty-two,
D. Forty six
Answer:
A. Eight
Explanation:
Although there are eight major endocrine glands scattered throughout the body, they are still considered to be one system because they have similar functions, similar mechanisms of influence, and many important interrelationships.
how many grams of na2co3 would be needed to produce 1000g of nahco3
Answer:
630.95 grams of Na₂CO₃ would be needed to produce 1000g of NaHCO₃
Explanation:
The balanced reaction is:
Na₂CO₃ + CO₂+ H₂O → 2 NaHCO₃
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of each compound participate in the reaction:
Na₂CO₃: 1 moles CO₂: 1 moleH₂O: 1 mole NaHCO₃: 2 molesBeing the molar mass:
Na₂CO₃: 106 g/moleCO₂: 44 g/moleH₂O: 18 g/moleNaHCO₃: 84 g/moleThen by stoichiometry the following quantities of mass participate in the reaction:
Na₂CO₃: 1 mole* 106 g/mole= 106 gCO₂: 1 mole* 44 g/mole= 44 gH₂O: 1 mole* 18 g/mole= 18 gNaHCO₃: 2 moles* 84 g/mole= 168 gYou can apply the following rule of three: if 106 grams of Na₂CO₃ are needed to produce 168 grams of NaHCO₃, how much mass of Na₂CO₃ is necessary to produce 1000 grams of NaHCO₃?
[tex]mass of Na_{2} CO_{3}=\frac{1000grams ofNaHCO_{3} *106gramsofNa_{2} CO_{3} }{168grams ofNaHCO_{3}}[/tex]
mass of Na₂CO₃= 630.95 grams
630.95 grams of Na₂CO₃ would be needed to produce 1000g of NaHCO₃
Local winds can be caused by______heating of the earth's surface.
equal
ground
uneven
super
4. Calculate the molarity of a solution made by dissolving 23.0 g NaCl in enough water to make 0.040 L
of solution?
Answer:
The molarity (M) of a solution is the number of moles of solute dissolved in one liter of solution. To calculate the molarity of a solution, you divide the moles of solute by the volume of the solution expressed in liters.
Explanation: