Answer:
electrons are located outside of the atoms nucleus
Which shows a triglyceride?
Answer:
A
Explanation:
A triglyceride (TG, triacylglycerol, TAG, or triacylglyceride) is an ester derived from glycerol and three fatty acids (from tri- and glyceride). Triglycerides are the main constituents of body fat in humans and other vertebrates, as well as vegetable fat.
The structure of option A shows a triglyceride.
What is triglyceride?Triglycerides are a kind of fat present in the blood. Triglycerides are the types of stored fats, which are not in use currently.
The structure of triglyceride is TRI esters containing glycerol bound to three fatty acid molecules.
Thus, the correct option is A.
Learn more about triglyceride
https://brainly.com/question/13840067
#SPJ2
Balance the equation.
Fe + Cl2 → FeCl3
A. Fe + 3Cl2 + 2FeCl3
B. Fe + 3Cl2 → FeCl3
C. 2Fe + 3Cl2 + 2FeCl3
Answer:
C. 2Fe + 3Cl2 + 2FeCl3
Explanation:
Hello there!
In this case, according to the given chemical reaction:
Fe + Cl2 → FeCl3
It turns out possible to balance it via cross-multiplying the chlorine atoms as they do not result from a whole number multiplication; it means we get:
Fe + 3Cl2 → 2FeCl3
And we just balance Fe by placing a 2 on Fe:
2Fe + 3Cl2 → 2FeCl3
Thus, the answer is C. 2Fe + 3Cl2 + 2FeCl3
Regards!
Label the states of each compound in the reaction below.
CuSO4( ) + 2KOHC ) + Cu(OH)2( ) + K2SO4( )
Answer:
CuSO₄(aq) + 2KOH (aq) —> Cu(OH)₂(s) + K₂SO₄(aq)
Explanation:
CuSO₄ + 2KOH —> Cu(OH)₂ + K₂SO₄
To know the state of each compounds, we shall determine the complete ionic equation. This can be obtained as follow:
In solution, CuSO₄ and KOH will dissociate as follow:
CuSO₄(aq) —> Cu²⁺(aq) + SO₄²¯(aq)
KOH (aq) —> K⁺ (aq) + OH¯(aq)
CuSO₄(aq) + KOH (aq) —>
Cu²⁺(aq) + SO₄²¯(aq) + 2K⁺(aq) + 2OH¯(aq) —> Cu(OH)₂(s) + 2K⁺(aq) + SO₄²¯(aq)
Note: Cu(OH)₂ is insoluble in water.
Therefore, the elemental equation is:
CuSO₄(aq) + 2KOH (aq) —> Cu(OH)₂(s) + K₂SO₄(aq)
How many grams of sodium chloride are in 100 mL of 1.25 M sodium chloride?
Answer:
7.3125grams
Explanation:
Molarity is the measure of the molar concentration of a solution. It can be calculated using the formula as follows:
Molarity = number of moles (n) ÷ volume (V)
Based on the information given,
Molarity = 1.25 M
Volume = 100 mL = 100/1000 = 0.1 L
Molarity = n/V
1.25 = n/0.1
n = 1.25 × 0.1
n = 0.125mol
Using the below formula to calculate the mass of NaCl;
mole = mass/molar mass
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
0.125 = mass/58.5
mass = 0.125 × 58.5
mass = 7.3125 grams
What function is most affected if the sepal of a flower is damaged by air pollution?
Answer:answer in explanation try to understand dear
Explanation:Air pollutants have a negative impact on plant growth, primarily through interfering with resource accumulation. Once leaves are in close contact with the atmosphere, many air pollutants, such as O3 and NOx, affect the metabolic function of the leaves and interfere with net carbon fixation by the plant canopy.
can someone please do this for me
2K(s) + F₂(g) --> 2KF(s)
The physical stare of potassium is solid(s) and that of potassium fluoride is solid(s) so, s will be put on both the blanks.
Now, In order to balance florine, we will put 2 for potassium floride, afterwards florone will be 2 on both side of equation but now potasium will become unbalnced so, we will put 2 for potassium. Thus, both sides of the equation will be balanced.
--------------------------------------------------------
P.S- Sorry, If I fail in properly explaining it to you.
Imagine that all microorganism suddenly disappeared from earth from what u have learned why do u think that animals would eventually disappeared from earth? Why would plant disappeared
Answer:
bugging milftoon comic milftoon comic milftoon cimicd how many to summon a transgender milftoon cimicd how
please I need help with this it is A(n)_______ is made of the same_______all the way through.
Answer:
hi the ans is A.
..............
When elements chemically combine with each other, what do they Form? A. electrons, B. compounds, C. atoms
Answer:
B
Explanation:
When two distinct elements are chemically combined—i.e., chemical bonds form between their atoms—the result is called a chemical compound. Most elements on Earth bond with other elements to form chemical compounds, such as sodium (Na) and Chloride (Cl), which combine to form table salt (NaCl).
MARK AS BRAINLEST!!
how many electrons are in a titanium atom
Answer:
2, 8, 10, 2
Explanation:
Answer:
2, 8, 10, 2
Explanation: Titanium/Electrons per shell
HELP ASAP CHEM!!!! Please
Answer:
The solubility of gases decreases with pressure as that of solids and liquids is not affected.
Burning fossil fuels provides a main source of energy in many parts of the world. Which is a disadvantage of using fossil fuels?
find the pH of
2.1 x 10-3 [HCI]
Answer: pH = 2.68
Explanation: pH = - log[H3O^+] .
HCl reacts with water : HCl + H2O -> Cl^- + H3O^+
So [H3O^+] = c(HCl) = 0.0021 M
pH = - log(0.0021) = 2.68
Which of the following would be a correct conversion factor
relating carbon dioxide (CO2) and glucose (C6H1206) using the
balanced equation below?
6CO2 + 6H20C6H12O6 + 602
Answer:6CO2/1C6H12O6
Explanation:
Magnesium metal reacts with hydrochloric acid to produce hydrogen gas and a solution of magnesium chloride. Write and balance the chemical equation for this reaction, and determine the volume of the hydrogen gas generated (at 1.00 atm, 25 °C) by reacting 10.0 g Mg with an excess of hydrochloric acid
Answer:
Mg + 2 HCl ⇒ MgCl₂ + H₂
10.1 L
Explanation:
Step 1: Write the balanced equation
Mg + 2 HCl ⇒ MgCl₂ + H₂
Step 2: Calculate the moles corresponding to 10.0 g of Mg
The molar mass of Mg is 24.31 g/mol.
10.0 g × 1 mol/24.31 g = 0.411 mol
Step 3: Calculate the moles of H₂ produced from 0.411 moles of Mg
The molar ratio of Mg to H₂ is 1:1. The moles of H₂ produced are 1/1 × 0.411 mol = 0.411 mol
Step 4: Calculate the volume occupied by 0.411 moles of H₂
0.411 moles of H₂ are at 1.00 atm and 25 °C (298 K). We can calculate the volume occupied using the ideal gas equation.
P × V = n × R × T
V = n × R × T / P
V = 0.411 mol × (0.0821 atm.L/mol.K) × 298 K / 1.00 atm = 10.1 L
what is carboxylic acid
Carboxylic acids.
Answer:
Carboxylic acid is an organic acid containing a carboxyl group. The simplest examples are methanoic (or formic) acid and ethanoic (or acetic) acid. It is used in the production of polymers, biopolymers, coatings, adhesives, and pharmaceutical drugs. They also can be used as solvents, food additives, antimicrobials, and flavorings.
Explanation:
Hope that helps.
II. The student then takes a 1.00 M stock
solution of table sugar
(sucrose, C12H22011) and mixes 0.305 L
of stock solution with additional
distilled water to create a dilute
solution with a total volume of 1.25 L.
• Explain how the student can
determine the molarity of the
resulting solution. Show a valid
calculation for the final molarity.
Answer:
0.244 M.
Explanation:
From the question given above, the following data were obtained:
Molarity of stock solution (M₁) = 1 M
Volume of stock solution (V₁) = 0.305 L
Volume of diluted solution (V₂) = 1.25 L
Molarity of diluted solution (M₂) =?
The molarity of the diluted solution can be obtained by using the dilution formula as illustrated below:
M₁V₁ = M₂V₂
1 × 0.305 = M₂ × 1.25
0.305 = M₂ × 1.25
Divide both side by 1.25
M₂ = 0.305 / 1.25
M₂ = 0.244 M
Thus, the molarity of the diluted solution is 0.244 M
The forces between ________ are examples of electric forces.
A.
charged particles
B.
neutrons
C.
masses
D.
photons
Answer:
The answer would be charged particles.
Explanation:
Electric force exists as one of the most fundamental forces in the universe, it occurs between all charged particles.
The state of matter of a substance is a physical property. A. True B. False
Answer:
I THINK IT IS TRUE BECAUSE THEY ERE FIRST FOUND TO DEMOCRITUS ARISTOTLE AND PLATO THE ROMANS AND GREEK CHEMISTS .
Explanation:
Explain how to identify a conjugate acid and a conjugate base in an acid base reaction.
Answer:
- Identify the acid and base in the reaction.
- What is left of the base after the reaction is known as the conjugate acid, while what is left of the acid after the reaction is known as the conjugate base.
Explanation:
Types of acids and bases:
When we are looking at conjugate acid and base, the type of acid and base we should focus on are Brønstead acid and base.
Brønsted acid: proton donor
Brønsted base: proton acceptor
Do note that proton here refers to hydrogen ion, H⁺.
Other types of acids and bases includes arrhenius acid/base and Lewis acid/base.
Definition:
Conjugate acid is what remains of the acid when a Brønsted acid donates a proton, while conjugate base is the newly formed protonated species when a Brønsted base accepts a proton.
Example:
Let's look at an example of a Brønsted acid-base reaction:
NH₃(aq) +H₂O(l) ⇌ NH₄⁺(aq) +OH⁻(aq)
Here, the base is NH₃ and the acid is H₂O.
NH₄⁺ is the conjugate acid, while OH⁻ is the conjugate base.
Note:
For a Brønsted acid- base reaction, whether a substance behaves as an acid or a base depends on what it is reacting with. Although H₂O behaves as an acid in this example, it behaves as a base when reacting with HCl.
49. What is the Atomic Mass of Magnesium on the Reaction Side of this chemical equation? Mg + Cl2 MgCl2 ? g 719 95.3g
Answer:
[tex]molar \: mass = 24g[/tex]
3. How many grams of aluminum can be heated from 90°C to 120°C if 500 J of heat energy are applied?
(c = 0.900 J/g °C)
We are given:
Initial Temperature = 90°c
Final Temperature = 120°c
Heat applied(ΔH) = 500 Joules
Specific heat(c) = 0.9 Joules / g°C
Mass of Aluminium(m) = ?
Change in temperature:
ΔT = Final temp. - Inital Temp.
ΔT = 120 - 90
ΔT = 30°c
Calculating the mass:
We know the formula:
ΔH = mcΔT
replacing the values:
500 = m(0.9)(30)
500 = m(27)
m = 500/27
m = 18.52 grams
Bottle A is filled with air, and Bottle B is filled with carbon dioxide of equal temperatures. Each bottle is placed 50 cm from a heat source, and the temperature inside each bottle is recorded every 5 minutes. Which statement describes the results of the experiment after an hour?
a. The temperatures in the bottles increased equally.
b. Bottle B has a higher temperature than Bottle A.
c. Bottle A has a higher temperature than Bottle B.
d. The temperature of neither bottle increased.
Answer:
Bottle B has a higher temperature than Bottle A.
Explanation:
We have to consider something very important here and that is the ability of the molecules of CO2 and those of air to trap heat.
CO2 molecules are better able to trap heat since it is among the green house gases.
Since CO2 is a greenhouse gas, the temperature of bottle B is higher than that of bottle A because more heat is trapped by the gas in bottle B than the gas in bottle A.
When KCl(s) is dissolved in water, the resulting solution is classified as a
O heterogeneous compound
O homogeneous compound
O heterogeneous mixture
O homogeneous mixture
Answer:
O homogeneous mixture
Explanation:
When Kci is dissolved in water it becomes a solute in O homogeneous mixture
What are alleles? Are theys ame or different
Answer:
Kind of like DNA or a part of DNA
Explanation:
They are what make you a person, no they aren't the same
What is said to have occurred when an object experiences a frequency equal to its natural frequency?
frequency
diffraction
resonance
amplitude
Answer: Resonance
Explanation:
A resonance is said to occur when an object experiences a frequency that is equal to its natural frequency.
A resonance refers to the sound that's produced by an object when the object vibrates at an identical rate as the sound waves that is coming from another object.
Therefore, the correct option is C
A perfect cube of aluminium metal was found to weigh 20.00g ,the density of the aluminium is 2.70g/ml ,what are the dimensions of the cube
Answer:
1.95cm x 1.95cm x 1.95cm
Explanation:
20.00g / 2.70g/mL = 7.41 mL = 7.41 cm^3
∛7.41 = 1.95cm
Describe the De Borglie's hypothesis
Answer:
The De Broglie hypothesis proposes that all matter exhibits wave-like properties and relates the observed wavelength of matter to its momentum. After Albert Einstein's photon theory became accepted, the question became whether this was true only for light or whether material objects also exhibited wave-like behavior.
can anyone help with this mole to mole/mole to grams question? any help would be greatly appreciated! Thanks!
Answer:
Explanation:
a) 3.00 mol Cu x 2 mol Ag/ 1 mol Cu = 6 mol Ag
b) 3.00 mol Cu x 2 mol Ag/1 mol Cu x 107.87g Ag/ 1 mol Ag = 647.22g Ag
c) 3.00 mol Cu x 1 mol Cu(NO3)2/ 1 mol Cu = 3 mol Cu(NO3)2
d) 3.00 mol Cu x 1 mol Cu(NO3)2/ 1 mol Cu x 187.54g/ 1 mol Cu(NO3)2 =562.644g Cu(NO3)2
For each of the salts below, match the salts that can be compared directly, using Ksp values, to estimate solubilities.
a. Mg(OH)2
b. CaSO3
c. BaCrO4
d. CaS
1. copper (II) sulfide
2. zinc hydroxide
Answer:
1 - Salts required that can be compared directly, using Ksp values, to estimate solubilities for copper (II) sulfide are - [tex]CaSO_3[/tex] (Option b) ,[tex]BaCrO_4[/tex] (Option c) and [tex]CaS[/tex] (Option d)
2 - Salts that can be compared directly, using Ksp values, to estimate solubilities for zinc hydroxide are - [tex]Mg(OH)_2[/tex] (Option a)
Explanation:
[tex]K_s_p[/tex] values can be used to compare the solubility of salts that produce ions in a 1:1 ratio.
[tex]CuS[/tex] {copper (II)sulfide} dissociates with ions in ratio 1:1 .Because the salts [tex]CaSO_3[/tex] , [tex]BaCrO_4[/tex] and [tex]CaS[/tex] have a 1:1 ion ratio, the solubilities of options b, c, and d can be compared to salt 1.
[tex]K_s_p[/tex] Values can be used to compare the solubility of salts that produce ions in a 1:2 or 2:1 ratio.
2. [tex]Zn(OH)_2[/tex] dissociates into ions in ratio 1:2 .
Because the ions in the salt [tex]Mg(OH)_2[/tex] are in a 1:2 ratio, the solubility of salt 2 can be compared to that of salt 'a'.
Hence , Salt 1 is matched with options b , c , d.
Salt 2 is matched with option a.