Answer:
I cant really see the individual problems very well but i hope this helps
Explanation:
Decomposition = one thing -> 2 or more things
Synthesis= 2 or more things -> 1 thing
When a 8 gram slice of bread is burned under a beaker of 4500 grams of water, it heats up the water by 1.3 degrees Celsius. The specific heat of water is 1 cal/g degree C. How many calories does this slice of bread contain
Answer:
[tex]5850\ \text{cal}[/tex]
Explanation:
m = Mass of water = 4500 g
c = Specific heat of water = [tex]1\ \text{cal/g}^{\circ}\text{C}[/tex]
[tex]\Delta T[/tex] = Change in temperature of water = [tex]1.3^{\circ}\text{C}[/tex]
Heat is given by
[tex]q=mc\Delta T\\\Rightarrow q=4500\times 1\times 1.3\\\Rightarrow q=5850\ \text{cal}[/tex]
A slice of the bread contains [tex]5850\ \text{cal}[/tex].
A mixture of PCl5(g), PCl3(g), and Cl2(g) is in a 1.00 L reaction vessel. The total pressure of the reaction system is 1.40 atm at equilibrium. Then the volume of the reaction vessel is reduced from 1.00 L to 0.50 L and equilibrium is re-established at constant temperature. What is the total pressure of the system at this point?
Answer:
The total pressure immediately after the volume reduction is 2.8 atmospheres
Explanation:
The question parameters are as follows;
The initial volume of the reaction vessel, V₁ = 1.00 L
The initial pressure of the reaction system, P₁ = 1.40 atm
The final volume of the reaction system, V₂ = 0.50 L
With the assumption that the gas mixture behaves as an ideal gas, and the temperature is constant, by Boyle's law we have;
P₁·V₁ = P₂·V₂
Where;
P₁ = The initial pressure in the reaction vessel
V₁ = The initial volume in the reaction vessel
P₂ = The total final pressure in the reaction vessel after the reduction in the vessel volume
V₂ = The final volume in the reaction vessel
∴ P₂ = P₁·V₁/V₂
From which we have;
P₂ = 1.40 atm × 1.00 L/(0.50 L) = 2.8 atm
The total final pressure in the reaction vessel, P₂ = 2.8 atm.
Calculate: A. Mercury has a specific Heat Capacity of 0.14 J/goC. How much heat is needed to raise the thermometer temperature 15 oC to 95 oC. There is 5 g of mercury in the thermometer.
Answer:
[tex]\boxed {\boxed {\sf 56 \ Joules}}[/tex]
Explanation:
We are given the mass, specific heat, and temperature, so we must use this formula for heat energy.
[tex]q=mc \Delta T[/tex]
The mass is 5 grams, the specific heat capacity is 0.14 Joules per gram degree Celsius. Let's find the change in temperature.
ΔT= final temperature - initial temperature ΔT= 95°C - 15°C = 80°CWe know the variables and can substitute them into the formula.
[tex]m= 5 \ g \\c= 0.14 \ J/ g \ \textdegree C \\\Delta T= 80 \ \textdegree C[/tex]
[tex]q= (5 \ g )( 0.14 \ J/ g \ \textdegree C ) ( 80 \ \textdegree C)[/tex]
Multiply the first numbers. The grams will cancel.
[tex]q= 0.7 \ J/ \textdegree C(80 \ \textdegree C )[/tex]
Multiply again. This time the degrees Celsius cancel.
[tex]q= 56 \ J[/tex]
56 Joules of heat are needed.
How are igneous and sedimentary rocks similar? A.They are both formed by erosion. B.They are both formed from cooled lava. C.Heat and pressure can turn them into lava. D.Heat and pressure can turn them into metamorphic rock.
Answer:
D
Explanation:
I learned this last year.
WILD GUESS
OUT OF BAKUGOU SHOTO AND DEKU
GUESS WITCH ONE I SIMP FOR
Answer: all of them?
Explanation:
Answer:
Deku.
Explanation:
Look at the dots around each symbol and the energy levels from the resources above;
Answer the questions in the text entry option for this assignment.
Copy and paste questions and respond in complete sentences.
Include a space between each question.
Be specific with your responses for each question. Assume your reader has no knowledge of the subject and you are teaching them via your answers.
Please answer the following questions:
Why does Na have only one dot?
Why do none of these diagrams show more than 8 dots?
What relationship do you notice between the dots in these two charts?
The number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table. Why? (Hint: Octet Rule (Links to an external site.))
Hello! Here's the answer I was able to come up with:
Why does Na have only one dot?
Sodium, or Na, has only one valence electron. (This makes the atom tend to participate in ionic bonding and "give" its single valence electron to an atom like chlorine.)
Why do none of these diagrams show more than 8 dots?
It is physically impossible for an atom to have more than 8 electrons in its valence layer, according to the Octet Rule.
What relationship do you notice between the dots in these two charts?
The dot diagram for each element represents the number of electrons each element will have in its outermost, or valence, shell. (2-8-8)
The number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table. Why?
An atom can have a maximum of two electrons in its innermost layer. Hydrogen and helium have only one and two electrons, respectively, so they don't have enough electrons to actually have more than one layer. Therefore, their outermost layer is, in fact, their only layer. This is why the number of dots that hydrogen and helium have in their dot diagram is the same as the number of electrons shown for them on the Periodic Table.
Don't copy this word for word! You will most likely be in trouble for plagiarism. Instead, rewrite these ideas in your own words, or paraphrase. Good luck, and I know you can do it! ♥
Cuáles son el pHy PoH de una solución cuya concentración de iones hidronio [H+]es de 0.000475 M de acido sulfurico?
stoichiometrically when 0.01 kg of CaCO3 is heated to produce CO2, occupied a volume at STP is
a. 2.2414 dm^3
b. 22.414 dm^3
c. 22414 dm^3
d. 224014 dm^3
Answer:
anjsbzhahxbVAbzbsbsbsbsjsjsdp
True or False: Tsunamis always look like a towering wall of water approaching the beach.
Answer:
false
Explanation:
Answer:
True
Explanation:
they can get up to several hundreds of feet.
how many moles of ammonia (NH3) are in 224L at standard pressure?
Answer:
10 moles
Explanation:
(224 L)*(1 mol/22.4 L) = 10 mol
1 mol/22.4 L is the conversion factor under standard temperature and pressure
HELP PLEASEEEE!!!!!!!!
Nitrogen (N)) reacts with hydrogen (H) to produce ammonia (NH3). Represent this reaction in terms of:
Particles
b. Moles
C. Mass
Answer:
C the answer is c
Explanation:
ITS C
2A → B + C The above reaction is run and it is found that a plot of the natural log of the concentration versus time is linear. This indicates that the reaction is ...
Answer:
zero order reaction
Explanation:
The seem to be a reaction is zero order as the data only fits to zero order integrated rate law.
Integrated rate law:
[A] = [A]_0 – kt
Here y = [ A] and slope is -k , so when we plot concentration of A with respect to t then we get the equation in the form of line
y = mx + c
So the answer Zero order in [A]
A STACK OF BOOKS WEIGHED 5 KILOGRAMS. ONE BOOK, WHICH WEIGHED 1,000 GRAMS, WAS
REMOVED FROM THE STACK HOW MUCH DID THE REMAINING BOOKS WEIGH?
Answer:
the remaining books weigh 4 kilograms or 4000 grams
What is the maximum number of moles of PH 3 that can be formed when 0.2 formed moles of phosphorus reacts with 4 moles of hydrogen to form PH 3? P 4(g) + 6H 2 (g) 4PH 3 (g)
Answer:
The maximum number of moles of PH₃ that can be formed is 0.8 moles.
Explanation:
The balanced reaction is:
P₄ + 6 H₂ → 4 PH₃
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of each compound participate in the reaction:
P₄: 1 moleH₂: 6 molesPH₃: 4 molesThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
To determine the limiting reagent, you can use a simple rule of three as follows: If by stoichiometry of the reaction 6 moles of hydrogen react with 1 mole of phosphorus, 4 moles of hydrogen will react with how many moles of phosphorus?
[tex]moles of phosphorus=\frac{4 moles of hydrogen*1 mole og phosphorus}{6moles of hydrogen}[/tex]
moles of phosphorus= 0.667
But 0.667 moles of phosphorus are not available, 0.2 moles are available. Since you have less moles than you need to react with 4 moles of hydrogen, phosphorus will be the limiting reagent.
Then you can apply the following rule of three: if by stoichiometry 1 mole of P₄ forms 4 moles of PH₃, 0.2 moles of P₄ will form how many moles of PH₃?
[tex]moles of PH_{3} =\frac{0.2 moles of P_{4} *4 moles of PH_{3} }{1 mole of P_{4} }[/tex]
moles of PH₃= 0.8
The maximum number of moles of PH₃ that can be formed is 0.8 moles.
Create a timeline to show how atomic structure was developed over the centuries?
Answer A`bousi
Explanation:
How many oxygen molecules are in this compound: H2O
Answer:
1 oxygen molecule is present in H₂O
Explanation:
How to find out?
There's a 2 beside H in H₂O showing that there are '2 atoms of hydrogen'
However there's no number to the right of Oxygen, so it is just 1.
write the electronic configuration of an Na+ and CL-1
Answer:
Na+ lost one electron: 1s2 2s2 2p6
Cl- gained an electron: 1s2 2s2 2p6 3s2 3p6
Explanation:
why do scientist think the earths core have iron in it .
Water conservation is important for which of the following reasons?
A. Demand for water is increasing.
B. Water treatment is expensive.
C. Pollution is likely to decrease water supply in the future.
D. All of the above
D
all of above becuase it's all conservation
Answer:
The answer is c which is pollution is likely to decrease water supply in the future
Describe 2 theories on the origin of the moon
Answer:
According to the text "After the sun spun to light, the planets of the solar system began to form. But it took another hundred million years for Earth's moon to spring into existence. There are three theories as to how our planet's satellite could have been created: the giant impact hypothesis, the co-formation theory and the capture theory."
~Deku
Explanation:
Which is NOT an assumption of matter made by the kinetic molecular theory of gases?
a. The kinetic energy of particles is determined by their mass and their velocity.
b. Gas particles are widely dispersed and therefore are not affected significantly by attractive or repulsive forces.
c. Gas particles are small and take up little volume relative to the volume of the space around them.
d. When particles collide, their total energy is decreased.
Answer:
There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
The theory that attempts to elucidate the behaviour of gases is known as kinetic molecular theory.
The postulates of kinetic molecular theory of gases are given below,
\bigstarGases consist of large number of identical particles(atoms or moleculesthat are so small and so far apart
\bigstar There is no force of attraction between the particles of a gas at ordinary temperature and pressure
\bigstarParticles of a gas are always in constant and random motion
\bigstarParticles of a gas move in all possible directions in straight lines. During their random motion, they collide with each other and with the walls of the container
\bigstarCollisions of gas molecules are perfectly elastic. This means that total energy of molecules before and after the collision remains same
\bigstarThe average kinetic energy (energy due to motion) of the gas particles is proportional to the temperature measured in kelvin. As temperature increases, the particles move faster and have more energy
\bigstarAt any particular time, different particles in the gas have different speeds and hence different kinetic energies.
\therefore From the above data it is clear that "There is strong attraction or repulsion between the gas particles.In other words,they strongly interact with each other" is NOT an assumption made by kinetic molecular theory.
Explanation:
According to Kinetic theory of gases, the kinetic energy of particles are derived from the temperature and not by their mass and velocity. Hence, option a is not an assumption of kinetic theory of gases.
What is kinetic theory gases ?According to kinetic theory of gases, gases substances are made of tiny particles. These particles when taken in a container have negligible volume compared to the volume of the container.
The collision between the gaseous particles and and between the particles and the wall make the pressure within the container. The kinetic energy of the particles is directly proportional to the temperature of the gas.
According to the theory, the kinetic energy is not determined from the mass and velocity of the particles, but by the temperature of the system. Hence, option a is not an assumption of kinetic molecular theory of gases.
Find more on kinetic theory:
https://brainly.com/question/14349214
#SPJ3
The teacher asked the students to design an experiment that would demonstrate that temperature will affect the pressure of a gas. Which of the
following would be a valid experiment that shows the correct relationship between gas temperature and pressure?
The correct option is option A. when the students check the air pressure of bicycle tires, once by keeping it out in the winter and noticing the air pressure being decreased and after by keeping the bicycle inside at room temperature and noticing that the air pressure has increased.
How are pressure and temperature of a gas related ?
According to Gay lussac's law, the temperature and pressure of a gas are directly proportional to each other, provided the volume is constant.
When the temperature of a gas is increased, the molecules gain more kinetic energy and hence the frequency of them hitting the walls of the container increases which basically implies that the pressure increases.
On the other hand when the temperature is low, the molecules do not have substantial kinetic energy to hit the walls of the container frequently, that is the pressure decreases.
When the bicycle tires were kept out in the winter, the low temperature decreased the air pressure inside the tires. While when they were warmed at room temperature, the pressure inside the tires increased.
Therefore, the correct option is option A. when the students check the air pressure of bicycle tires, once by keeping it out in the winter and noticing the air pressure being decreased and after by keeping the bicycle inside at room temperature and noticing that the air pressure has increased.
To know more on Gay lussac's law, click on
https://brainly.com/question/30758452
#SPJ2
which horizon has the least weathered rocks? How do you know?
Answer:
C: The C horizon is a subsurface horizon. It is the least weathered horizon. Also known as the saprolite, it is unconsolidated, loose parent material. The master horizons may be followed by a subscript to make further distinctions between differences within one master horizon.
Explanation:
15. What is the molar mass of H2CO3?
(atomic mass: C = 12.01, H = 1.01, 0 = 15.99)
Answer:
62.00
Explanation:
H2 means that there are two moles of hydrogen so multiply the atomic mass by two (1.01 × 2 = 2.02)
C only has one mole sp leave 12.01 alone
And multiply oxygen by 3 because there are three moles of oxygen (15.99 × 3 = 47.97)
Add them all together!
2.02 + 12.01 + 47.97 = 62.00 for molar mass
Which molecule has the most atoms?
A. CO2
B. N202
C. CO
D. H₂O S
How many joules of heat are absorbed to raise the temperature of 125 grams of water at 1 atm from 35°C to its boiling point, 100.°C.
Answer:
33962.5 J
Explanation:
From the question given above, the following data were obtained:
Mass (M) = 125 g
Initial temperature (T₁) = 35 °C
Initial temperature (T₂) = 100 °C
Specific heat capacity (C) = 4.18 J/gºC
Heat (Q) absorbed =?
Next, we shall determine the change in temperature. This can be obtained as follow:
Initial temperature (T₁) = 35 °C
Initial temperature (T₂) = 100 °C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 100 – 35
ΔT = 65 °C
Finally, we shall determine the heat absorbed. This can be obtained as follow:
Mass (M) = 125 g
Change in temperature (ΔT) = 65 °C
Specific heat capacity (C) = 4.18 J/gºC
Heat (Q) absorbed =?
Q = MCΔT
Q = 125 × 4.18 × 65
Q = 33962.5 J
Therefore, the heat absorbed is 33962.5 J
Transferring charge by touching or rubbing is called-
A) charging by contact
B) convection
C) insulation
D) none of these
Answer:
A) Charging by contact
Explanation:
Transfer of heat by direct contact, Heat energy is conducted from the hotter medium to the cooler medium
1. Which of the five types of reactions is taking place in the whoosh bottle? Justify your answer with evidence from the video.
Answer:
Other times I place a candle in water and cover it with a glass jar .
Explanation:
only to ... Many of you may already know this as the Whoosh Bottle demo due ... I have used this demo in the past for topics like exothermic reactions, combustion reactions, ... This adds to the evidence of a partial vacuum created in the bottle
can someone answer the 4 questions? (4 is optional) it would really help me out thanks
Answer:
1)Energy converter is the transformation of one form of energy into another form .It is more specifically that the term energy conversions refers to the process through which energy is changed into forms that are useful to humans .For 100 of years humans have used an array of devices and systems for this purpose.
2) The three energy converters that you or your family use regularly are
Electric Iron Electric BulbElectric generator3)The three kinds of power plants that produce electricity in Ontario are
Nuclear Power PlantsHydroelectric Power PlantsGeothermal Power Plants4)A power plant is an industrial facility that generates electricity from primary energy most of the power plants use one more generators that convert mechanical energy into electrical energy in order to supply power to the electrical grid for society's electrical needs.
may be this was ur answer for ur question u wanted
i just need an explanation :) so the problem was " what is the mass of 5 molecules of water(H2O) , in grams?" my teacher said the answer is 1.50 x 10^-22 but i dont understand why. why is it not 1.50 x 10^24, why is the exponent negative?
Answer:
Explanation:
The exponent is negative because water molecules are absolutely tiny. You can't see a molecule of water on the palm of your hand with your naked eyes, right? If a the mass of a molecule was 1.50 x 10^24, it'd be HUGE... like absolutely massive (possible the size of your city). Molecules are just tiny, tiny particles