Explanation:
February according to the urben dictionary
fast need answers
Find the amount of force if the body has pressure of 178 Pa on 18 mm²
Answer:
Force = 3.204Newton
Explanation:
Given the following data;
Pressure = 178
Area = 18 mm² to meter = 18/1000 = 0.018 m²
To find the force;
Force = pressure * area
Force = 178 * 0.018
Force = 3.204 Newton.
what does "no reference to direction of motion mean"?
Explanation:
its means the quantity in question is a scalar quantity, has only magnitude but no direction, for example. speed,has no reference to direction of motion, since the speed of a body say 5 m/s( the direction of the body has not been stated) but the velocity of a body say 5m/s to the east has a reference to direction of the motion.
That's why velocity is different from speed
Simplify the expression in part H. Following the five payments, what is the net change in the loan amount from Qulana's viewpoint?
Answer:
I'm not sure but, this video's pretty cool: gestyy.com/eyRkH2
Explanation:
pretty scary gameplay
Answer:
After five monthly payments, Quiana’s loan amount changes by $1,237.15.
Explanation:
Which of the following is NOT a characteristic of noble gases? *
-unreactive
-odorless
-solid at room temperature
-colorless
Answer:
solid at room temperature
Explanation:
they are unreactive
Three charges lie along the x-axis. One positive charge, q1 = 4.80*10^-18 C, is at x = 3.72 m, and another positive charge, q2 = 1.60*10^-19 C, is at the origin.
At what point on the x-axis must a negative charge, q3, be placed so that the resultant force on it is zero?
Answer:
The third charge needs to be placed at [tex]x \approx 0.57\; \rm m[/tex].
Explanation:
Both [tex]q_1[/tex] and [tex]q_2[/tex] would attract [tex]q_3[/tex].
These two electrostatic attractions need to balance one another. Hence, they need to be opposite to one another. Therefore, [tex]q_1[/tex] and [tex]q_2[/tex] need to be on opposite sides of [tex]q_3[/tex]. That is possible only if [tex]q_3 \![/tex] is on the line segment between [tex]q_1 \![/tex] and [tex]q_2 \![/tex].
Assume that [tex]q_3[/tex] is at [tex]x\; \rm m[/tex], where [tex]0 < x < 3.72[/tex] (in other words, [tex]q_3 \![/tex] is on the line segment between [tex]q_1[/tex] and [tex]q_2[/tex], and is [tex]x\; \rm m \![/tex] away from [tex]q_2 \![/tex].)
Let [tex]k[/tex] denote Coulomb's constant.
The magnitude of the electrostatic attraction between [tex]q_1[/tex] and [tex]q_3[/tex] would be:
[tex]\displaystyle \frac{k\cdot q_1 \cdot q_3}{(3.72 - x)^{2}}[/tex].
Similarly, the magnitude of the electrostatic attraction between [tex]q_2[/tex] and [tex]q_3[/tex] would be:
[tex]\displaystyle \frac{k\cdot q_2 \cdot q_3}{x^{2}}[/tex].
The magnitudes of these two electrostatic attractions need to be equal to one another for the resultant electrostatic force on [tex]q_3[/tex] to be [tex]0[/tex]. Equate these two expressions and solve for [tex]x[/tex]:
[tex]\displaystyle \frac{k\cdot q_1 \cdot q_3}{(3.72 - x)^{2}} = \frac{k\cdot q_2 \cdot q_3}{x^{2}}[/tex].
[tex]\displaystyle \frac{q_1}{(3.72 - x)^{2}} = \frac{q_2}{x^{2}}[/tex].
[tex]\displaystyle \frac{x^2}{(3.72 - x)^{2}} = \frac{q_2}{q_1}[/tex].
[tex]\displaystyle \frac{x^2}{(3.72 - x)^{2}} = \frac{q_2}{q_1} = \frac{1}{30}[/tex].
By the assumption that [tex](0 < x < 3.72)[/tex], it should be true that [tex](x > 0)[/tex] and [tex](3.72 - x > 0)[/tex]. Therefore, [tex]\displaystyle \frac{x}{(3.72 - x)} > 0[/tex].
Take the square root of both sides of the equation [tex]\displaystyle \frac{x^2}{(3.72 - x)^{2}} = \frac{1}{30}[/tex].
[tex]\displaystyle \sqrt{\frac{x^2}{(3.72 - x)^{2}}} = \sqrt{\frac{1}{30}}[/tex].
[tex]\displaystyle \frac{x}{3.72 - x} = \frac{1}{\sqrt{30}}[/tex].
[tex]\sqrt{30}\, x = 3.72 - x[/tex].
Therefore:
[tex]\left(1 + \sqrt{30}\right)\, x = 3.72[/tex].
[tex]\displaystyle x = \frac{3.72}{1 + \sqrt{30}} \approx 0.57[/tex].
Hence, [tex]q_3[/tex] should be placed at [tex]x \approx 0.57\; \rm m[/tex].
Think of a technology or appliance that you use regularly. Identify the transfers and transformations of energy necessary to operate the technology. Explain your answer
PLZZ
Answer:
Energy conversion
Explanation:
We regularly use automobile which runs on the chemical energy of the fuels such as diesel and petrol, the chemical energy from the fuel would convert into the thermal energy which is used to drive the engine of the vehicle,further the thermal energy converted into the mechanical energy which is used to drive the prime mover of the automobile.
What is thermal energy?It can be defined as the form of the energy in which heat is transferred from one body to another body due to their molecular movements, thermal energy is also known as heat energy.
We frequently utilize vehicles that operate on chemical energy from fuels like diesel and gasoline.
This chemical energy is transformed into thermal energy, which drives the engine of the vehicle, and then mechanical energy, which drives the prime mover of the vehicle.
Thus, we can say that the transfers and transformations of energy are necessary to operate the technology.
Learn more about thermal energy from here, refer to the link;
brainly.com/question/3022807
#SPJ2
a ball rolls from rest down an incline with a uniform acceleration of 4m/s². what is it speed after 8 seconds
For which angle of projection range of projectile is maximum
(a) 40°
(b) 35°
(e) 43°
(d) 48°
Answer:
the correct answer is e
Explanation:
In projectile launching, the range or distance on the x-axis is given by the expression
R = [tex]\frac{v_o^2 \ sin 2 \theta }{g}[/tex]
where v₀ is the initial velocity θ the launch angle.
When analyzing this expression is maximum when the sine function is maximum
sin 2 θ = 1
2θ = sin⁻¹ 1
2 θ = 90
θ = 90/2
θ = 45º
reviewing the answers there are no correct ones since the maximum angle occurs for 45º
if we analyze with these angles we have
θ = 40
sin 2θ = sin 2 40 = 0.98
θ = 35
sin 2 35 = 0.939
θ = 43
sin 2 43 = 0.998
θ = 48
sin 2 48 = 0.994
if we take the written angles the range is maximum for 43º
therefore the correct answer is e
14. A spoon is placed in a cup of hot
cocoa. The net flow between the
spoon and the cocoa indicates that
they ahve different
O
specific heats
O
heats of fusion
O
initial temperatures
O
melting points
Answer:
Specific heats
Explanation:
Which of the following statements about open clusters is true? Group of answer choices All stars in the cluster are approximately the same age. There is an approximately equal number of all types of stars in the cluster. All stars in the cluster are approximately the same color. All stars in the cluster have approximately the same mass. All stars in the cluster will evolve similarly.
Answer:
All stars in the cluster are approximately the same age.
Explanation:
An open cluster refers to a group of around a thousand stars such that these stars are surrounded by the nebula. All-stars in the cluster are approximately the same age. Milky Way consists of more than 1000 such open clusters.
Examples of an open star cluster areas follows:
1. Beehive
2. Hyades
3. Pleiades
The raising and lifting the ball by kicking is called
A Dodge
B. Scoop
C. Passing
D. Toe
I’ll give brainless plis
The raising and lifting the ball by kicking is a B) Scoop
help me, what is the shape of solid?
Explanation:
Solids have a definite shape and definite volume.
Answer:
Solids have a definite shape and volume because the particles in them are held together tightly.
Explanation:
Liquids have a definite volume but their particles aren't held together as tightly as solids, so liquids take on the shape of the container they are in. Gases have no definite shape OR volume they just float around because the particles in them are so loose they can take on the shape and volume of any container.
please help me i need help right away!!!!
Answer:
Direct current is the flow of current through a current carrying conductor in the same direction from positive to negative ends. Alternating current is the type of current our mains have where the current is constantly changing direction at a certain rate
Explanation:
Direct current (DC) is a form of electricity that has a unidirectional flow, such that the current path in the current carrying conductor of a circuit is, at all times, in a specific single direction
Alternating Current (AC) is electricity continuously reverses its direction of flow and the magnitude of electricity at a given frequency with time. It is the of current found in electric supply cables that are found in our houses
Therefore, we have;
Direct current is the flow of current through a 1. current carrying conductor in the 2. same direction from positive to negative ends. Alternating current is the type of current our 3. mains have where the current is constantly 4. changing direction at a certain rate
A guitar string vibrates 600 times in 2 seconds.
Find its frequency and time period.
Steps Required.
frequency is equal to number of oscillations or vibrations upon time
therefore,
check picture
Who created the periodic table
Answer:
Dimitri Mendeleev
In 1869 Russian chemist Dimitri Mendeleev started the development of the periodic table, arranging chemical elements by atomic mass. He predicted the discovery of other elements, and left spaces open in his periodic table for them.
1.
Two children sit on a uniform seesaw such that a 400. N child is 2.0 m from the support. How
far from the center should the second child of weight 475 N sit in order to balance the system
if the support is at the center of the plank?
Answer:
The other child must sit the same meters as the N child so they an be balanced.
Explanation:
the image represents a sound wave as it goes through several changes. Describe how the waves changes. where does it get louder? where does it get softer?how does the pitch change? how do you know?
someone please help me TvT
Answer:
At point A. it gets kinda loud then at point B. it gets very loud than at point C. it gets quieter than at point D. it gets more silent.
Explanation:
Because you can tell when the waves get large it gets louder and then when the waves get more far apart then it get more quiet. Hope this helped!
A crowbar is used to lift a load of 1200 N by placing it at a distance of 25 cm from the fulcrum.
the force required at 60 cm from the fulcrum to balance the load.
Answer:
500 N
Explanation:
From the question,
Sum of clockwise moment = sum of anti clockwise moment.
F×d = F'×d'.................. Equation 1
Where F = Force applied to lift the load, d = distance, F' = Force required, d' = distance of the required force from the fulcrum
Make F' the subject of the equation
F' = F×d/d'.................. Equation 2
Given: F = 1200 N, d = 25 cm, d' = 60cm.
Substitute these values into equation 2
F' = 1200×25/60
F' = 500 N.
Hence the force required to balance the load is 500 N
A child pushes a toy truck 2.5 m across a floor with a constant force of 22 N. How much work does the child do on the toy truck?
22/2.5= 8.8 J
22 x 2.5= 55 W
22/2.5= 8.8 W
22 x 2.5= 55 J
Answer:
55j
Explanation:
work= force × distance
We have that When A child pushes a toy truck 2.5 m across a floor with a constant force of 22 N.The work done by the child on the toy truck
W= 55 Joules
22 x 2.5= 55 J
Option D
From the question we are told that
A child pushes a toy truck 2.5 m
A constant force of 22 N.
Generally the equation for the Workdone is mathematically given as
W=f*d
W=22N*2.5
W= 55 Joules
Therefore
When A child pushes a toy truck 2.5 m across a floor with a constant force of 22 N.The work done by the child on the toy truck
W= 55 Joules
22 x 2.5= 55 J
Option D
For more information on this visit
https://brainly.com/question/21811998
Which of the following is an example of an electromagnetic wave ?
Answer:
Its a wave
Explanation:
THis is one
Answer: a light wave
Explanation: a pex
A medication given to treat ventricular
tachycardia and ventricular fibrillation
Answer:
Amiodarone
Explanation:
Can anyone do this ? 1. 60°C water is pumped from a tank. What is the maximum height that the pump can be installed? The friction loss in the suction line is 2.2 J/kg. The vapour pressure of 60°C water is 19.93 kN/m2. The NPSHR of the pump is 4.0 m.
Answer:
The max height is approximately 4.106 m
Explanation:
The given parameters are
The friction loss = 2.2 J/kg
The vapor pressure = 19.93 kN/m²
NPSHR = 4.0 m
We have;
4 × 997 × 9.8 = P + 101,325 - 2.2J/kg × 997 kg/m³ - 19930
P = 4 × 997 × 9.8 - (101,325 - 2193.4 - 19930) = -40119.2
P = -40119.2
h = 40119.2/(997 × 9.8) ≈ 4.106
The max height ≈ 4.106 m
A worker drives a .500kg spike into a rail tie with a 2.50kg sledgehammer. The hammer hits the spike with a speed of 65.0 m/s. If one-third of the hammer's kenetic energy is converted to the internal energy of the hammer and spike, how much does the total internal energy increase?
Answer:
The increase internal energy is 1,760.41[tex]\overline 6[/tex] J
Explanation:
The given parameters of the worker, sledgehammer, and rail line are;
The mass of the spike driven into the rail, m₁ = 0.500 kg
The mass of the sledgehammer, m₂ = 2.50 kg
The speed of the sledgehammer, v = 65.0 m/s
The fraction of the hammers kinetic energy, KE, converted to the internal energy of the hammer and the spike, Δ[tex]E_{internal}[/tex] = 1/3 × KE
Therefore, we have;
The kinetic energy, KE, of the sledgehammer is given by KE = 1/2·m₂·v²
Where;
m₂ = The mass of the sledge hammer = 65.0 m/s
v = The velocity o the sledgehammer
∴ KE = 1/2 × 2.50 kg × (65.0 m/s)² = 5,281.25 J
Therefore;
The increase internal energy, Δ[tex]E_{internal}[/tex] = 1/3 × 5,281.25 J = 1760.41[tex]\overline 6[/tex] J
how easily a material stretches when force is applied
Answer:
translucent and transparent
Solar energy heats the surface of the Earth, including the ground, rocks, and even roadways. As the temperature of these surfaces increases, heat energy is released back into the atmosphere, forming a pocket of warm air. As the warm air pocket rises, it is replaced by cooler air. This process is responsible for many of the weather patterns in our atmosphere and is known as
Answer:
convection
Explanation:
I hope this helps
A room is 5.0 m long, 4.0 m wide, and 3.0 m high. What is the mass of the air it contains?
Answer:
Here u go
Explanation:
Mass of air in the room m= volume of room×density of air
=(5m×4m×3m)(1.20kgm3)=72kg
Weight of air, W=mg=(72kg)(9.8ms2)=706N.
Answer:
person above is correct, i did the work and got the smae answer
the distance from a crest to a trough is called the wave length
Answer:
Explanation:
The highest surface part of a wave is called the crest, and the lowest part is the trough. The vertical distance between the crest and the trough is the wave height. The horizontal distance between two adjacent crests or troughs is known as the wavelength.
I hope it's helpful!
What’s velocity and acceleration
Answer:
velocity- the speed of something in a given direction.
Explanation:
acceleration- increase in the rate or speed of something.
The speed limit on an interstate highway is posted at 75mi/h. What is the speed in kilometers per hour? In feet per second?
Answer:
See explanation
Explanation:
The conversion factor from miles per hour to kilometers per hour is 1.609344.
Hence;
To convert 75mi/h to kilometers per hour,
75mi/h * 1.609344 = 120.7 kilometers per hour
b)
To convert 75mi/h to feet per second
Since
1 mile per hour = 1.46667 foot per second
75mi/h = 75 * 1.46667 = 110 feet per second
Which statement accurately describes renewable energy sources?
A. They include fossil fuels and hydroelectric power.
B. They are found in nearly limitless supply.
C. They take millions of years to form and should be used responsibly.
D. They provide the majority of the energy for the United States.
PLS HELP!! I WILL GIVE BRAINLYIST!!
Answer:
A, They include fossil fuels and hydroelectric power.
Explanation:
Hope this helped!!!! :)) <3