which message travels faster - the one that travels along the surface of the axon or the one that jumps from node to node? group of answer choices

Answers

Answer 1

In case of node to node, the message travels faster. Our brain can exchange signals with our toes in a few thousandths of a second by jumping signals hundreds of times quicker than signals that travel along the surface of the axon.

Which axon conducts impulses most quickly ?

The speed of nerve impulse conduction is accelerated by the presence of a myelin sheath. Similar unmyelinated axons conduct impulses about ten times slower than myelinated ones do.

Action potentials "jump" from node to node as they move down the axon. The term saltatory conduction, which means "to leap," describes this. Moving in an axon with myelin is slower than traveling along an axon through saltatory conduction.

E. myelinated neurons conduct impulses at the quickest speeds. A fatty layer called myelin surrounds the neuronal axon. When compared to continuous conduction on unmyelinated axons, saltatory conduction on myelinated axons is a faster and more energy-efficient type of impulse conduction.

To know more about myelin sheath please click here https://brainly.com/question/690266

#SPJ4


Related Questions

calculate the energy and wavelength of the characteristic x-ray produced when a k-shell electron is replaced by an m-shell electron in tungsten.

Answers

The energy and wavelength of the characteristic x-ray produced is 66KeV and 0.192А° respectively.

What is energy of electrons in a shell?

The energy level of each electron shell varies, with the electron shells nearest to the nucleus having a lower energy level than those farthest from the nucleus. If the electron jumps from the second energy level down to the first energy level, it must give off some energy by emitting light.

What is wavelength and how to calculate it?

Wavelength can be defined as the distance between two successive crests or troughs of a wave. It is measured in the direction of the wave.

Rydberg's Formula for calculating the wavelength:

1 / λ = R(Z - [tex]1^2[/tex]) [tex][\frac{1}{1} - \frac{1}{n^2} ][/tex]

Energy associated with the electron in the K-shell is approximately

[tex]E_k = -(74-1)^2(13.6eV) = -72474eV[/tex]

The number of electrons in the n = 1 and n = 2 states, which act as a shield between the M electrons and the nucleus. M electrons are protected from the nucleus by about nine electrons because there are currently eight electrons in the n = 2 state and one electron in the n = 1 state.

[tex]Z_eff = z - 9[/tex]

Consequently, the energy of an electron in the M shell is

[tex]E_m = \frac{-13.6 z_eff^2}{3^2}[/tex]eV = [tex]E_m = \frac{13.6 (z-9)^2}{3^2}[/tex]

[tex]E_M =[/tex] -6384eV

Therefore, emitted X-ray has an energy equal to

[tex]E_m - E_k = {-6384-(-72474)}eV[/tex]

               = 66090eV = 66KeV

To calculate wavelength,

For an electron in the Kshell, σ=1.

Thus, Zeff = Z−σ = Z−1

Here, as electron drops from Mshell(n=3) → Kshell(n=1), we call the radiated emission Kβ X-ray and from is given as

1 / λ[tex]_{kb}[/tex] = R(Z-[tex]1^2[/tex])[tex][\frac{1}{1^2} -\frac{1}{3^2} ][/tex]

λ[tex]_{kb}[/tex] = 10967800 × (74 - [tex]1^2[/tex]) [tex][\frac{8}{9}][/tex]

λ[tex]_{kb}[/tex] = 0.192А°

The energy and wavelength of the characteristic x-ray produced is 66KeV and 0.192А° respectively.

To know more about energy and wavelength, check out:

https://brainly.com/question/24277522

#SPJ4

two vectors vector a and vector b, each located in a different position in the plane, have equal magnitude and the same direction. what can be said about the relationship of vector a and vector b? (select all that apply.)

Answers

Two vectors vector a and vector b, each located in a different position in the plane, have equal magnitude and the same direction, both vectors are considered to be parallel to each other.

Two vectors are said to be parallel if and as it were in case the angle between them is degrees. Parallel vectors are too known as collinear vectors, that is two parallel vectors will be continuously parallel to the same line but they can be either within the same direction or within the exact inverse direction. The cross product of any two parallel vectors could be a zero vector. For any two parallel vectors a and b, their dot product is equal to the product of their magnitudes.

To know more about vectors refer to the link brainly.com/question/13322477

#SPJ4

what speed (as a ratio with respect to the speed of light) must a canister be shot from one ship towards the other ship in order for the canister to approach the other ship at 0.999c as seen by the other ship?

Answers

The speed of the canister relative to the ship firing it must be 0.999c since the speed of light is the same in all inertial reference frames.

Relative velocity is the vector difference between the velocities of two objects in motion relative to each other. It is the velocity of an object in relation to the velocity of the other object. Since the speed of the canister must be 0.999c relative to the ship firing it, the speed of the canister relative to the other ship must be 0.999c + (the relative velocity of the two ships).

So, if the relative velocity of the two ships is v, the speed of the canister relative to the other ship must be 0.999c + v.

For more questions like Relative velocity click the link below:

https://brainly.com/question/28202827

#SPJ4

During a tug-of-war, team a pulls on team b by applying a force of 1100 n to the rope between them. The rope remains parallel to the ground. How much work does team a do if they pull team b toward them a distance of 2. 0 m?.

Answers

Work done by team A while pulling team B is 2200 J.

What is work done?

The work done by a force is defined to be the product of the component of the force in the direction of the displacement and the magnitude of this displacement. Formula. Work can be calculated by multiplying Force and Distance in the direction of force as follows. W = F × d.

What is cos theta in work done?

Work done in physics is defined as a dot product of a force vector and displacement vector. W = F.S.cos θ where cos θ is the angle between the force vector and displacement vector.

What force is applied during tug of war?

Tug-of-war is a game that uses friction as the driving force.

What happens in a tug of war if both teams apply equal force?

In a tug of war, if the two teams are applying equal force on the rope then the net force acting on the rope is zero and hence the rope stays at the same place.

Force F= 1100 N

Displacement caused by the applied force S = 2 m

Force and displacement are in the same direction the angle between them is zero.

Work done is calculated as

[tex]W=F * S * cos theta\\W=1100 * 2 * cos 0\\W=2200 J[/tex]

Thus, the work done by team A to pull is 2200J.

To know more about work done:

https://brainly.com/question/21854305

#SPJ4

an intoxicated clockmaker produces a grandfather clock whose pendulum has a period of 3.5\;\mathrm{s}3.5s. what is the length of the pendulum?

Answers

The length of the pendulum is equal to 1.35 m.

What is a simple pendulum?

A simple pendulum can be described as a mechanical arrangement that exhibits periodic motion. The simple pendulum is made of a small bob of mass ‘m’ suspended by a thin thread hung at its upper end of length L.

The simple pendulum moves in an oscillatory motion and the motion occurs in a vertical plane which is driven by the gravitational force.

The time period of the pendulum is given by:

T = 2π√(L/g)

Where L is the length and g is the gravitational acceleration.

Given, the time period of a pendulum, T = 3.5 s

Then the length of the pendulum can be calculated as:

[tex]{\displaystyle 3.5 = 3\times 3.14 \sqrt{\frac{L}{9.8} }[/tex]

(0.37)² = L/9.8

L = 1.35 m

Learn more about Simple pendulum, here:

https://brainly.com/question/14759840

#SPJ1

In comparing two unequal forces on a rigid body, is it possible to have the larger force produce less torque than the smaller force?.

Answers

Yes, it is possible to have the larger force produce less torque than the smaller force. It is possible for the larger force to be applied closely enough to the center of mass of the rigid body due to which its resulting torque is smaller than that of a smaller force applied at a point far from the center of mass.

What is force?

Force is an external cause due to which a body tends to modify or change its state. Due to application of force, the body can also change its size, shape, and direction. Force has both direction and magnitude.

Force = mass × acceleration

What is torque?

The force that can cause an object to rotate along an axis is measured as torque.

[tex]\tau = rF\sin\theta[/tex]

Here, [tex]\tau \\[/tex] = Torque

r = radius

F = force

[tex]\theta[/tex] = the angle between the F and the lever arm

In the given question, lets assume the following,

F = Large force

d = Distance from the point of application of the large force to center of mass

f = Small force

D = Distance from the point of application the of small force to center of mass

Now,

Assuming D > d (i.e, D is greater than d).

The torque caused by the large force is Fd, and the torque caused by the little force is fD if the forces are applied perpendicular to the body's axis. Hence, depending on the values of F, f, D, and d, we can have Fd < fD.

To know more about center of mass please click here https://brainly.com/question/28021242

#SPJ4

Determine the output voltage Vo in the circuit given below using nodal analysis, where the dependent source A-0.2Vo Please report your answer so the magnitude is positive and all angles are in the range of negative 180 degrees to positive 180 degrees. j2Ω 12/0°V 4Ω The output voltage of the circuit is V.-n/r n/r

Answers

It is given that:

dependent source = A-0.2Vo

Suppose we use a baseball to represent Earth. On this scale, the other terrestrial worlds (Mercury, Venus, the Moon, and Mars) would range in size approximately from that of _________.
a golf ball to a baseball

Answers

The other terrestrial worlds (Mercury, Venus, the Moon, and Mars) would range in size approximately from that of a golf ball to a baseball.

Define solar system.

The Sun and the things that circle it make up the gravitationally bound solar system. It was created 4.6 billion years ago when a massive interstellar molecular cloud collapsed because to gravity. The Sun is home to the great majority (99.86%) of the system's mass, with Jupiter holding the lion's share of the remaining mass. Mercury, Venus, Earth, and Mars are the four planets in the inner solar system. These terrestrial planets are mostly made of rock and metal.

We consider the size of the earth to be that of a golf ball. This scale would allow us to squeeze 1.3 million golf ball-sized earths inside of the Sun, which would be over 15 feet wide. That is equivalent to two full school buses' worth of golf balls.

To know more about solar system use link below:

https://brainly.com/question/1160302

#SPJ4

a student performs three trials of a standard two-slit interference experiment. in each trial the material and hence the index of refraction in the region between the barrier and the screen is

Answers

Between the barrier and the screen in each trial, the material and consequently the index of refraction are 487.8 nm.

Light waves alter in speed when two materials with different densities, like air and glass, come into contact. The resulting change in direction is referred to as refraction.

With D=2.05, d=5,

m=1,Y1=20cm

In our case, d sin = m.

λ=dYn/mD=

5*10⁻⁶*20*10⁻²/1*2.05

λ=487.8 nm

Refraction in physics is the change in direction that results from a wave's change in speed when it travels through one medium and enters another. For instance, waves move faster in deep water than they do in shallow water.

Learn more about refraction here-

https://brainly.com/question/14760207

#SPJ4

The reason padded dashboards are used in cars is that they _____.
a. change the impulse in a collision
b. increase the time it takes the person to come to a complete stop
c. change the momentum of a collision
d. increase the force on the person as they come to a final stop

Answers

The reason padded dashboards are used in cars is that they a.) change the impulse in a collision. Therefore option a) is correct.

Why are padded dashboards used in cars?

Padded dashboards make automobiles safer as they increase the time taken to decrease the momentum of impacting body to zero, which also decreases the impact. Therefore, force acting on the padded dashboards is small.

If the driver or passenger hits the dashboard, then the force and time required to stop the momentum is exerted by the dashboard. Padded dashboards serve to extend the time duration of the impact, hence minimizing the effect of the force.

To know more about padded dashboard, refer

https://brainly.com/question/22099771

#SPJ1

Nuclear decay occurs according to first-order kinetics. How long will it take for a sample of chromium-51 to decay from 35. 0 grams to 10. 0 grams? the half-life of chromium-51 is 28 days.

Answers

50 dayss  long will it take for a sample of chromium-51 to decay from 35. 0 grams to 10. 0 grams

What purpose does chromium-51 serve?

Observationally stable chromium isotopes include chromium Cr-51.

It is utilized as a diagnostic radiopharmaceutical agent when injected intravenously to calculate the volume or mass of red blood cells, research red blood cell survival, and assess blood loss.

what The half-life of chromium-51 is what?

Introduction.With a half-life of 27.7 days and gamma rays with a maximum energy of 0.320 MeV, chromium-51 is a widely utilized radionuclide

to know more about Nuclear visit:

https://brainly.com/question/18187269

#SPJ4

a rope of mass m and length ` hangs from the ceiling. (i) what is the wave speed on the rope a distance y above the lower end?

Answers

From a ceiling, a rope with the mass m and length L hangs. Demonstrate that v =√gy is the wave speed on the rope at a distance of y above the lower end.

Explain about the wave speed?

The amount of space a wave covers in a certain amount of time, such as the number of meters it covers in a second, is known as its wave speed. Speed = Wavelength x Frequency is an equation that describes how wave speed relates to wave wavelength and wave frequency. When the wavelength and frequency are known, this equation can be used to determine the wave speed. Wave frequency (f) is recorded in hertz, while wave speed (v) is measured in meters per second (m/s) (Hz)

Although technically, velocity means both speed and direction, wave velocity is most often used to refer to speed. A wave's velocity is independent of its intensity and equal to the product of its wavelength and frequency (number of vibrations per second).

To learn more about wave speed refer to:

https://brainly.com/question/26637292

#SPJ4

Consider a proton, an electron, and a helium nucleus (alpha particle) moving at the same speed vv. List their de broglie wavelengths from largest to smallest.

Answers

The sequence for de broglie wavelengths from largest to smallest is electron > proton > helium.

de broglie wavelength is an important concept to study various phenomenon in quantum mechanics.

Mathematically, de broglie wavelength equation is λ = h/p (p=mv)

Where, h is the Plank's constant

m is the mass of the particle

v is the velocity of particle.

mass of proton = mp = 1.6 x [tex]10^{-27}[/tex] kg

mass of electron, me = 9.1 x  [tex]10^{-31}[/tex] kg

mass of helium nucleus, mHe = 6.6 x  [tex]10^{-27}[/tex] kg

As the velocity of all the three elements are same as v.

According to the de Broglie wavelength formula, since v is same for all λ is inversely proportional to the mass of the element.

Lesser  the mass more will be the de broglie wavelength.

Here, mass of electron < mass of proton < mass of helium nucleus.

So, de broglie wavelength of electron > de broglie wavelength of proton > de broglie wavelength of helium nucleus.

To know more about de broglie wavelengths,

https://brainly.com/question/13199969

#SPJ4

At a hydroelectric power plant, water is directed at high speed against turbine blades on an axle that turns an electric generator. For maximum power generation, should the turbine be designed so that the water is brought to a dead stop, or so that the water rebounds? If only an external force can change the momentum of the center of mass of an object, how can the internal force of the engine accelerate a car?

Answers

Ideally, the water bounces off the turbine blades, maximizing electricity era. when water splashes, momentum changes extra than while you are simply status.

Also, if the change in momentum of the water is greater than the alternate in momentum of the blade, the blade will spin faster. Consistent with the laws of movement, the momentum of the center of gravity of an object can most effective be changed by the movement of an external force.

But, because of the frictional force generated while the tires contact the ground, the internal force of the engine is added, allowing the automobile to accelerate.

Hydro turbines convert the strength of flowing water into mechanical energy. A hydroelectric generator converts this mechanical power into energy. A high stress water jet is pressed towards the turbine blades. The route of flow modifications. The ensuing change in momentum exerts a force on the turbine blades, inflicting the turbine to rotate.

Learn more about The momentum here:- https://brainly.com/question/1042017

#SPJ4

which of the following statement(s) is/are correct? i) the energy change, , when ( 15.99491461956 amu) is formed from 8 protons and 8 neutrons is less than zero.ii) nuclear fission is used to produce electric power in nuclear reactorsiii) the first example of nuclear fission involved bombarding with nuclei.

Answers

The statement that is true is that; nuclear fission is used to produce electric power in nuclear reactors.

What is a fission reaction?

We know that a fission reaction has to do with a kind of reaction in which a radioactive nucleus is bombarded by the use of a particle and then there is the disintegration of the atomic nucleus in order to produce energy.

This has been one of the ways by which we can be able to generate electricity in several power plants across the world. The loss in the mass of the reactants is the equivalent of the energy produced.

Learn more about fission:https://brainly.com/question/2732120

#SPJ1

The Carnot cycle is calculated using this law or modifications of it, and Daniel Bernoulli derived it with Newton's laws of motion. Independently discovered by Edme Mariotte, credit for it is most often given to the author of (*) The Skeptical Chymist. It is part of the combined gas law, with Gay-Lussac's Law and Charles' Law. For 10 points, identify this law that states that at a fixed temperature, pressure and volume of a gas are inversely proportional.

Answers

Boyle's law states that the volume of a given quantity of gas sustained at a fixed temperature is inversely proportional to the measurement's measurement of pressure.

Describe Newton's law.

The motion of an item is related to the forces operating on it by Newton's equations of motion. According to the first law, until a force strikes on an item, it will not alter its motion. According to the second law, an object's force is determined by multiplying its mass by its acceleration. According to the third law, when two objects interact, they exert equal-sized and opposite-direction pressures upon one another.

Bernoulli equation: what is it?

Static pressure plus dynamic pressure equals total pressure is a simple way to express Bernoulli's equation. Each point Every point in a steadily flowing fluid, regardless of the fluid speed at that point, has its own unique static pressure p and dynamic pressure q.

What is Gay-Lussac's Law and Charles' Law?

Joseph-Louis Gay-Lussac investigated the expansion of gases as the temperature is increased. His data helped establishCharles' law, which says, in its modern form, that the volume of a gas is directly proportional to the absolute temperature.

Now we need to say which law is there which state that at a fixed temperature, pressure and volume of a gas are inversely proportional.

The law that states this is Boyle's law.

To know more about Boyle's law click the link:

brainly.com/question/1437490

#SPJ4

Circle the contact forces from the list:
Magnetism
Air resistance
Weight
Upthrust
Reaction

Answers

upthrust, reaction and air force

6. A 1400 kg car is also traveling in a straight line. Its momentum is equal to that *
of the truck in the previous question. What is the velocity of the car? ROUND TO
THE NEAREST HUNDREDTHS (2 DECIMAL PLACES)

Answers

Answer:

V = 2.86 m/s

Explanation:

Given:

m = 1400 kg

p = 4000 kg·m/s

_________________

V- ?

Momentum:

p = m·V

Velocity:

V = p / m

V = 4000 / 1400 ≈ 2.86 m/s

which has the lowest heat capacity? (values of heat capacities and calculations are unnecessary). which has the lowest heat capacity? (values of heat capacities and calculations are unnecessary). 3 kg of iron 10 g of liquid water 30 kg of ice 1 g of gold

Answers

Answer:

3kg of iron

Explanation:

A liquid of constant density rho and constant viscosity μ flows down a wide, long inclined flat plate. The plate makes an angle θ with the horizontal. The velocity components do not change in the direction of the plate, and the fluid depth, h, normal to the plate is constant. There is negligible shear stress by the air on the fluid. Find the velocity profile u(y), where u is the velocity parallel to the plate and y is measured perpendicular to the plate. Write an expression for the volume flow rate per unit width of the plate.

Answers

The velocity profile u(y) is defined as V = (alpha)*g*sin(alpha)*h^3/3M, where u is the velocity measured parallel to the plate and y is measured perpendicular to the plate. The air just slightly shear stresses the fluid.

Velocity is a vector measurement of an object's rate of motion and direction of motion. The magnitude and direction must therefore be understood in order to calculate the velocity according to this criterion. It is possible to describe shearing stress, also known as shear stress, as "a type of stress that acts coplanar with cross section of material." Shear forces resulted in shear stress. They are a pair of forces that have the same magnitude and are directed in the opposite direction and operate on opposite sides of a body. A vector quantity is shear stress.

Alpha = g*sin(alpha)*h2/2M [y - y^3/3h^2]

V = (alpha)*g*sin(alpha)*h2/2M

Alpha = g*sin(alpha)*h^3/3M

Learn more about shear stress here

https://brainly.com/question/12910262

#SPJ4

what range of spring constant values will cause the motion of the system to have damped oscillation?

Answers

The system's behavior becomes more elastic when the spring constant, k, is increased, as is the Q factor

How might one raise the spring constant?

Since a spring's constant k and its length are inversely related, when a spring is divided into n parts, the length increases by 1n, making the spring constant k/(1/n)=nk.

How do mass and the spring constant relate?

The square root of the mass and the spring constant have opposite relationships with respect to the period of a spring-mass system.

To know more about spring constant visit;

https://brainly.com/question/14159361?

#SPJ4

Question 1 options:

60 miles


1 mile


60 miles per hour


Trick question. You can't go 60 miles if an hour has 60 minutes

Answers

Answer:

Explanation:

You can drive at 60 miles per hour

D = 60 miles

t = 1 hour

Speed:

V = D / t = 60 / 1 = 60 mph

In thinking about the uniform distribution of a gravitational field over a sphere, why does gravitational force have an inverse-square relationship with the distance between objects?.

Answers

In the first case it is  increased by a factor of 9.

Explain in detail.

In physics, a gravitational field is a model used to explain the influences that a massive body extends into the space around itself, producing a force on another massive body.

This model is used to explain gravitational phenomena, and is measured in newtons per kilogram. The formula for determining the gravitational field strength is weight divided by mass. On Earth, the gravitational field strength is 10 N/kg, and other planets have different gravitational field strengths. For example, the Moon has a gravitational field strength of 1.6 N/kg.

To know more about Gravitational force here

https://brainly.com/question/940770

#SPJ4

In comparing two unequal forces on a rigid body, is it possible to have the larger force produce less torque than the smaller force?.

Answers

Yes It is conceivable for a force to produce less torque when it is greater than a force that is smaller.

What occurs when there are unequal forces?

An object's motion can be altered by unbalanced forces.Two things cause this.An object will move if an imbalanced force pushes and pulls on it while it is at rest.Unbalanced forces also can cause an item in motion to shift its speed or direction.

What impact do uneven forces have on motion?

Students are aware that unbalanced forces can cause objects to accelerate, decelerate, or change direction during their motion.

to know more about forces visit:

https://brainly.com/question/13191643

#SPJ4

a figure skater is rotating with her arms stretched out away from her body. as she pulls her arms in towards her body, what happens to her angular velocity?

Answers

She draws her arms close to her body, decreasing her moment of inertia, to quicken the rotational velocity of her spin. Due to the conservation of angular momentum, rotational velocity will increase,

What are Rotational Velocity ?

The angular velocity (w), a vector quantity in uniform circular motion, is determined by dividing the angular displacement (ΔФ a vector quantity), also a vector quantity, by the change in time (t). Speed is equal to the arc length travelled (S) divided by the change in time (Δ), which is also equal to ||R.

According to the above given information

We got to know that

She draws her arms close to her body, decreasing her moment of inertia, to quicken the rotational velocity of her spin. Due to the conservation of angular momentum, rotational velocity will increase.

To know more about Rotational Velocity

https://brainly.com/question/26095104

#SPJ4

analysis of an interference effect in a clear solid shows that the wavelength of light in the solid is 329 nm. knowing this light comes from a he-ne laser and has a wavelength of 633 nm in air, is the substance zircon or diamond?

Answers

The substance is zircon, of which interference analysis is done.

Wavelength of light in solid = λ = 329 nm

Wavelength of light from he-ne laser = λ' = 633 nm

Interference effect = n =

= n =  λ' / λ

= n = 633 / 329

= n = 1.92

The interference, in physics, is the net effect of the combination of two or more wave trains moving on intersecting or coincident paths. The effect is that of the addition of the amplitudes of the individual waves at each point affected by more than one wave.

Thus the substance is zircon.

To know more about Interference Effect:

https://brainly.com/question/10599901

#SPJ4

an electrician is running wire from the electric box on a house to a utility pole 75 feet away, the angle of elevation to the connection on the pole is . how much wire does the electrician need?

Answers

Answer: The electrician need78 feet of wire are required by the electrician as a result.

Reason:

The elevated angle between the horizontal plane and line of sight to the connection on the pole.

find more: https://brainly.com/question/21137209?referrer=searchResults

#SPJ4

Two power lines run parallel for a distance of 270 m and are separated by a distance of 40.0 cm. If the current in each of the two lines is 140 A and if they run in opposite directions, determine the magnitude and direction of the force each wire exerts on the other.
Answers:
magnitude: _____ N
direction: towards eachother, or away from eachother

Answers

The force exerted by each wire on the other is 2.646N and it is away from each other.

The parallel electricity lines are 270 meters long and spaced 40 centimeters apart.

The power line's current is 140A.

In order to exert force on one power line owing to another,

F = uI1I2L/2r.

Where,

The line's current is I₁ and I₂, respectively.

L is the wire's length.

The distance between them is r.

Assigning values,

F = 4 x π x 10⁻⁷ x 140 x 140 x 270/2 x π x 0.4.

Continuing to solve,

F = 2.646 N.

Because the current is flowing in the same direction, the force will be in the opposite direction. Regardless of the current's direction, the force's magnitude will not change.

To know more about magnetic field, visit,

brainly.com/question/25932320

#SPJ4

an object is launched upward with an initial velocity of 64 feet per second from a platform 80 feet height. a. what is the maximum height of the object? b. how many seconds until the object hits the ground?\

Answers

a) Object maximum height is : 144 feet

b) object hits the ground in : 5.74 seconds

a) t = - [tex]\frac{b}{2a}[/tex]

  t  = - [tex]\frac{-64}{2(-16)}[/tex]

  t  =  2 second

h(t) = -16[tex]t^{2}[/tex] + 64t + 80

  h(2) = -16([tex]2^{2}[/tex]) + 64(2) + 80

       h = -64 + 128 + 80

        h = 144 feet

b) Time to maximum height = 2 seconds

Maximum height = 144 ft

Displacement when it hits the ground  = -80

-80 = -16[tex]t^{2}[/tex] + 64t + 80

solve for t :

t = 5.74 seconds

A displacement simple definition is what?

A change in an object's position is referred to as "displacement." It is a vector quantity with a magnitude and direction. The symbol for it is an arrow pointing from the initial location to the ending place. For instance, if an object shifts from location A to position B, its position changes.

To know more about displacement visit:

https://brainly.com/question/547186

#SPJ4

I understand that the question you are looking for is:

A object is launched directly upward at 64 feet per second (ft/s) from a platform 80 feet high. The equation that models this is given by h(t) = -16[tex]t^{2}[/tex] + 64t + 80.

a) What will the objects maximum height ?

b) How many seconds until the object hits the ground?

how much time in seconds will it take a cart to reach the bottom of the track?assume the cart starts from rest, the track is 1.5 m long and the distance covered by the cart is 1.5 m.

Answers

Around 80 times we should expect it to land on B.

What is time?

Time is basically a measure of non-stop, consistent change  in our own surroundings. Usually we can see through a specific point of view. Concept of time is self-evident and intuitive. Describing the fundamental nature of time is quite difficult.

The general time formula of the any kind of  task that is given as [Time = Distance ÷ Speed]. for SI unit of time is seconds (s).

As per the given condition-

Spin circle=3

Time = 120 sec

the total is 3

the red and orange equals to 2

2/3 times 120

240/3

=80 times

Thus, the correct answer is 80 times.

To know more about time click-

https://brainly.com/question/26046491

#SPJ1

Other Questions
You have a carryover balance of $600 on a credit card that has a 18.99% annual percentage rate (APR). You have a recurring monthly purchase of $70 for your water bill and you make a payment of 7% of the ending balance is made each month. Complete the table below. Round each value to the nearest cent. capacity strategies are implemented based on management's objectives and corporate policies. which pure strategy is used that retains the work force at a stable level? compare the wind speed within the eye and the eyewall. What can you say? a client who is 14 weeks' pregnant mentions that she has been having difficulty moving her bowels since she became pregnant. which hormone is responsible for this common discomfort during pregnancy? which statement below is true? group of answer choices the outcome of a simultaneous, one-shot game will be in cell d this is an example of a prisoner's dilemma neither company has a dominant strategy only one company has a dominant strategy please help will brainliest!! Which of these ideas did you discuss in yourresponse? Check all that apply.1. the cost of the decision I chose2. the benefit of the decision I chose3. details to support my answer a prokaryotic cell is found in an environment that has high salinity and a cell wall composed of polysaccharides. it must be The internal energy within a system associated with the motion of particles and that can be added to a substance is called. Which of the followingdescribes the study ofembryology?A. Embryology helps scientistsdiscover the predators of a species.B. Embryology is the study of adultorganisms.C. Embryology reveals similaritiesbetween organisms as they aredeveloping before birth. This is the answerD. Embryology helps scientistsunderstand how organisms interactwith their environment. a patient with high cholesterol is ordered to take atorvastatin. what information will be included in the patient teaching? (select all that apply.) When logging into a website that uses a directory service, what command authenticates your username and password?. one of the ways we perceive images is by organizing stimuli into an object seen against its surroundings. what is this perceptual tendency called? question 1 according to research by the national survey on drug use and health (nsduh), in 2013 an estimated 28.7 million people reported driving under the influence of alcohol at least once during the previous year. a) true b) false an advertiser doesn't have much time to create ads, and hopes to use a display campaign to automatically create them. which two building blocks must they supply in order for a display campaign to automate their ad creation? a. headlines b. keywords c. images d. videos a line with a slope of 7 passes through the point (-2,-9). what is its equation in slope-intercept form? to study the maximum amount of genome diversity in humans, which of the following provides the most information? imagine a trader buys a put option on a stock with a strike price of 500 and pays a premum of 25. what is the traders break even point which type of leader inspires employees to follow a vision, facilitates change, and creates a strongly positive performance climate? this type of leader is considered to be the most effective. why did James Annan have to create his charity