Answer:
B
Explanation:
Answer:
i put platinum in edge
Explanation:
Edge doesnt give correct answers on unit tests, but i passed with an 88 :)
Why is it important to know characteristics that matter undergoes in chemistry? How can we analyze the relationships between chemical and physical changes and properties?
Answer:
It's important for scientists to know the properties of matter because all things are made up of matter. Each type of matter has different physical characteristics and scientists need to know and understand these characteristics to make calculations. ... The main phases of matter are solid, liquid, and gas.
What is the formula of the compound between calcium and sulfur that has the percent composition 55.6% (by mass) calcium and 44.4% (by mass) sulfur? What is the formula of the compound between calcium and sulfur that has the percent composition 55.6% (by mass) calcium and 44.4% (by mass) sulfur? Ca2S4 CaS Ca2S CaS4 CaS2 Request
Answer: The empirical formula is [tex]CaS[/tex]
Explanation:
If percentage are given then we are taking total mass is 100 grams.
So, the mass of each element is equal to the percentage given.
Mass of Ca= 55.6 g
Mass of S = 44.4 g
Step 1 : convert given masses into moles.
Moles of Ca =[tex]\frac{\text{ given mass of Ca}}{\text{ molar mass of Ca}}= \frac{55.6g}{40.08g/mole}=1.38moles[/tex]
Moles of S =[tex]\frac{\text{ given mass of S}}{\text{ molar mass of S}}= \frac{44.4g}{32.06g/mole}=1.38moles[/tex]
Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.
For Ca = [tex]\frac{1.38}{1.38}=1[/tex]
For S = [tex]\frac{1.38}{1.38}=1[/tex]
The ratio of Ca : S = 1:1
Hence the empirical formula is [tex]CaS[/tex]
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
A forecaster studying the climate of an area would find which of the following most helpful?
A. average yearly precipitation
B. today's barometric pressure
C. temperature changes in one month
D. how often natural disasters occur
A forecaster studying the climate of an area would find average yearly precipitation most helpful.
What is forecaster studying of climate?Forecaster studying of climate tells about the changes which will occur in the atmosphere in the upcoming future time.
Forecasting is done by measuring various environmental factors for the prediction of atmosphere. As it will given information about the percent of rainfall in the upcoming days, amount of precipitation, snowfall and so on.
Hence, option (A) is correct.
To know more about Forecaster studying of climate, visit the below link:
https://brainly.com/question/13407372
Many animals influence and contribute to ecosystem services. As pollinators, how do butterflies ultimately contribute to direct ecosystem services?
Answer:
yEs
Explanation:
Given the balanced equation: 4Fe(s) + 30₂(g) → 2Fe₂O₃(s) + 1640 kJ Which phrase best describes this reaction?
A) endothermic with AH = +1640 kJ
B) endothermic with AH =-1640 kJ
C) exothermic with AH= +1640 kJ
D) exothermic with AH = -1640 k
Answer:
yeah the answer under the explanation
Explanation:
The answer is (4) exothermic with ΔH = -1640 kJ. The 1640 kJ energy is at the right side of equation means that it releases energy. The enthalpy change means the energy of production minus the energy of reactants. If it is exothermic, the ΔH < 0.
Which is the correct complete ionic equation for the reaction of
2HCl(aq) + Zn(s) + H2(g) + ZnCl2(aq)?
a) H+(aq) + CI-(aq) + Zn(s) →
H2(g) + Zn2+(aq) + Cl-(aq)
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
c) H+(aq) + Zn(s) → H2(g) + Zn2+(aq)
d) 2H+(aq) + Zn(s) → H2(g) + Zn2+(aq)
Answer:
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
Explanation:
The equation is given as;
2HCl(aq) + Zn(s) + H2(g) + ZnCl2(aq)
In writing an ionic equation, only the aqueous compounds dissociates into ions. This means HCl and ZnCl2 would dissociate to form ions.
This is given as;
2H+ + 2Cl- + Zn(s) --> H2(g) + Zn2+ + 2Cl-
The correct option is;
b) 2H+(aq) + 2C1-(aq) + Zn(s) → H2(g) + Zn2+(aq) + 2Cl-(aq)
Molar Mass:
Find the molar masses of the following compounds. Also report the number of atoms in the compound:
1) NaBr
2) PbSO4
3) Ca(OH)2
4) Na3PO4
5) (NH4)2CO3
6) C6H12O6
7) Fe3(PO4)2
8) (NH4)2S
9) Zn(C2H3O2)2
10) AgF
Answer:
Atomic models are important because, they help us visualize the interior of atoms and molecules, and thereby predicting properties of matter.
Explanation:
We study the various atomic models in our course of study because, it is important for us to know, how did people come to the present concept of an atom. How did physics evolve from classical to quantum physics.
All these are important for us to know and thus, knowledge about various atomic models, their discoveries and drawbacks and finally improvements based on scientific evidence present at that time is important for us to understand the underlying theory very well.
Explanation:
A DAY IN THE LIFE OF METIS JOURNAL. I WROTE IT HOPE U LIKE IT XD
We, who live in the west, were Nomadic. So we always moved from place to place to hunt buffalo and other fur-bearing animals. And now again we have to shift everything we collected , like, all the essential needs we collected. It’s really hard to shift stuff, But when you move to a new place you get to see new beautiful places. They are just so satisfying to see! It’s like all my work(like the shifting work) is paid off. I love it! We always meet the Hudson’s bay company employees, and give them furs which we took from the bissons and other furry animals we hunted. And in exchange they give us their (Hudson’s Bay company) goods. Which is good! Because then we or I won't be able to enjoy that delicious pemmican!
The one reason that makes me proud of my parents is that because of them I am like a translator for both sides in the fur trade! Anyways coming back to the present. As I said before, we were moving today to another place, But on the way some people along with my father will ride the famous York boats carrying supplies to fur posts. I begged my father to take me with him! And as usual he gave me some silly reason for me to stay. And now since I don’t have anything to do I will-..Nevermind, My mom’s calling me. Okay after helping my mom keep the fur posts into the York boats me , my mom, and the others are just relaxing and enjoying nature just to take a break. Since, I am so obsessed with my Journal notebook today I’m just going to sit here and right what comes to my mind. I’m not like the others who always seem to be talking with someone. I like my own space!
I kind of miss my dad already, but he and his fellow members need to travel the waterways from the red river further west and north to hudson bay. These red river carts also travel the trek back and forth over land to St. Paul, Minnesota and to posts in saskatchewan. Speaking about the red river, the only large settlement in the region is the red colony. About 12000 people lived in this colony around Fort Garry. Some were the original Selkirk settlers or their descendents. They had come from Scotland with lord Selkirk when he established the colony in 1811. Many of these original settlers were poor farmers who had been displaced from their lands in scotland. They had endured many hardships in the early years of settlement, including foods, hunger, and sickness. I love studying about other colonies, cultures , history etc.
Which of the following MOST influences a major
shift in how the entire nucleotide sequence is
read?
А
base-pair substitutions and point mutations
B
silent mutations and nonfunctioning proteins
С
missense mutations and nonsense mutations
D
base-pair insertions and deletions
Answer:
Which of the following MOST influences a major
shift in how the entire nucleotide sequence is
read?
А base-pair substitutions and point mutationsB silent mutations and nonfunctioning proteins
С missense mutations and nonsense mutations
D base-pair insertions and deletions
Among the given disorders, missense mutations and nonsense mutations which mostly influences the shift in entire nucleotide.
What is mutation?A nucleotide is made of ribose sugar, phosphate groups and base pairs. Each base have a complementary base to which it pairs. If any disorder occurs in the base pairing or coding in nucleotide it is called the mutation.
A missense mutation is a sort of point mutation or single base mutation that alters the DNA by replacing one nucleotide of the codon with another nucleotide, thus changing the amino acid that is coded for in the protein.
A nonfunctional protein may emerge from the substitution of an amino acid, or the protein may not be impacted at all. Whether the mutational alterations are "conservative" or "nonconservative" will determine the functionality of the resulting protein.
It's interesting to note that the mutation is known as a nonsense mutation when the alteration in the codons nucleotide causes the development of the stop codon. The nonsense mutation causes the premature end of protein synthesis as a result of the creation of the stop codon.
To find more on mutations, refer here:
https://brainly.com/question/13923224
#SPJ2
Please help me with this homework
What is the molarity of a solution when 2.75 g of NaCl is dissolved in 1100 mL of solution?
0.043 M
0.25 M
0.43 M
4.27 M
Answer:
Explanation:
0.25 M
The molarity of a solution will be 4.27M .
What is molarity?Molarity (M), often known as molar concentration, is the concentration of a solution expressed in moles of solute per liter of solution.
What is solution?Solution can be considered as a mixture of more than one component. It may be homogeneous solution as well as heterogeneous solution.
Gram to mole conversion:
[tex]=\;2.75\;g.\;\frac{1\;mol}{58.44g} \\=\;0.0470 \;mol[/tex]
Molarity of the solution can be calculated by using the following formula:
It is calculated that, moles of solute = 0.0470 mol, volume of the solution = 1100 mL.
Now, put the value of given data in molarity formula:
[tex]Molarity=\frac{Moles\;of\;the\;solute}{Volume \;of\; the\; solution} \\=\frac{0.0470\;mol}{1100 \;mL} \\=\;4.27\;mol/mL\\=\;4.27\; M[/tex]
Therefore, the molarity of a solution will be 4.27M.
To know more about molarity and solution click here.
https://brainly.com/question/2817451.
#SPJ2
Using the rules of electron configurations is this a valid orbital diagram?
weeks and how much money, in dollars, Jamal deposits into the savings account.
Week
Deposit (dollars)
0
10
1
15
2
20
3
25
4
30
Let f ()represent the amount of money Jamal deposits into his savings account at the end of 2 weeks. Based on the table,
what is f(10)?
E
A
50
0
С
D
60
B
10
2.
3
4
5
6
7
8
9
10 11
Next
Activat
Go to Setto
1002A
3/19/20
CH
O
BH
Type here to search
An
196 becase we all rice
Explanation:
What kind of data does doppler radar provide?
Answer:
the one above is not right
Explanation:
how do i break my leg
Answer:
why would u want 2?
Explain in the comments why.
o
Plants rely heavily on _______
in the nitrogen cycle to incorporate nitrogen into organic come pounds
1 oxygen
2 viruses
3 bacteria
4 fungi
Answer:
3. Bacteria
Explanation:
If you don't trust me, search it up!
Which of the following is an example of kinetic energy?
O B. a stretched rubber band
O C. a piece of coal
O A. a battery
O D. a rolling ball
Which of these is a behavioral adaptation?
An anteater has a very long tongue to help it eat catch and eat ants.
An artic fox has white fur which helps it blend into the snow.
A mouse has 3–14 offspring at a time to increase the number that survive.
A brown bear hibernates and becomes inactive during winter.
Answer: Your answer would be D
Explanation: Sorry if i get it wrong ! (but good luck and make sure to rate)
Answer:
D
Explanation:
because when it is winter
a bear hibernates in a cave
and eats lots of food so it
dosent starve after sleeping
for such a while.
Hope this helps
plz mark brainliest
if you would be so kind!
bye!
What is a cone of depression and how is it caused?
Answer:
Depression can be caused by many things, like being neglected, abused, or even trauma. Even thoughts that might trigger sadness, or anxiety it's caused by alot of problems of your life or others around you
Explanation:
hope this helps a bit :)
For the balanced equation shown below, how many moles of N2 reacted, if 155 moles of NH3 are produced?
3H2 + N2 => 2NH3
Answer: 1 mole nitrogen produces 2 moles ammonia
How many moles you need for 155 mol ammonia?
155/2 moles
Explanation:
Which of the following pairs of elements will combine to produce a covalent bond?
1-Hydrogen and chlorine
2-Magnesium and oxygen
3-Lithium and bromine
Answer:
Hydrogen and Chlorine
ie HCL
The pairs of chemical elements that will combine to produce a covalent bond is: 1. Hydrogen and chlorine.
In Chemistry, the three (3) main types of chemical bonds include:
Ionic bonds: Lithium and bromineHydrogen bonds: Hydrogen and oxygen.Covalent bonds: Hydrogen and chlorine.A covalent bond can be defined as a type of bond that typically involves the sharing of electrons between the atoms of a chemical element.
For example, the type of bond that is produced (formed) between hydrogen atoms and a chlorine atom is a covalent bond.
The hydrogen atom shares it single electron with a chlorine atom that is having seven (7) valence electrons to produce an inert gas such as hydrochloric acid (HCL).
In conclusion, the pairs of chemical elements that will combine to produce a covalent bond is hydrogen and chlorine.
Read more: https://brainly.com/question/24212500
Where have you seen evidence of viscosity?
Answer:
Lubrication in vehicles. When you put oil into your car or truck, you should be aware of its viscosity
Cooking. Viscosity plays a significant role in the preparation and serving of food.
Manufacturing. Manufacturing equipment requires appropriate lubrication to run smoothly.
oh, and medicine
Describe the region(s) of the Atlantic Oceans where dense waters will likely sink/
Answer:
The densest ocean water is formed in two primary locations near the poles, where the water is very cold and highly saline as a result of ice formation. The densest deep water mass is formed in the Weddell Sea of Antarctica, and becomes the Antarctic Bottom Water (AABW).
Explanation:
The densest ocean water is formed in two primary locations near the poles, where the water is very cold and highly saline as a result of ice formation. The densest deep water mass is formed in the Weddell Sea of Antarctica, and becomes the Antarctic Bottom Water (AABW).
Density is an intensive property as it does not depend on the quantity of the substances Whereas mass and volume are extensive property. Therefore, north Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink.
What is density?Density tells about the compactness of the substances, how much dense is the substances in other words. Object that is more denser than water they just sink in the water.
Mathematically,
Density = Mass of the metal ball ÷volume marked on the graduated cylinder
North Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink. Here, water is very cold and salty which makes the water denser.
Therefore, north Atlantic Ocean is the region of Atlantic Oceans where dense waters will likely sink.
To know more about density, here:
https://brainly.com/question/16894337
#SPJ2
Which of these boxes will not accelerate?
Answer:
B as all the forces cancel out
Explanation:
20-20=0
25-25=0
A student draws the model shown below. Which of these best compares the conditions at Location X and Location Y?
Answer:
Explanation:
You have to use formula b to your answer
Measure out 2.87 moles of sodium chloride (Nacl) into a clean dry cup.
Answer: weigh is m = n × M = 2.87 mol × 58.44 g/mol
Explanation: mass = amount of substance × molar mass
M((NaCl) = 22.99 +35.45
Which of the nine substances are made of three elements?
Answer: You are made of mostly 6 elements: Oxygen, Carbon, Hydrogen, Nitrogen, Calcium, and Phosphorus. Some of these elements combine to form compounds in your body.
Explanation:
Which type of solute would have the greatest impact on a colligative property?
A. C6H12O6
B. NaCl
How many molecules are found in 3.4 moles of carbon dioxide?
Please help me asap! :0
Thank you!
Answer:
One mole of anything has 6.023 x 10^23 molecules.
That would mean 3.4moles of CO2 have 6.023x 10^23 times 3.0.
So that would be2.04782×10^24 molecules in 3.0 moles of C02.
Mole measure the number of elementary entities of a given substance that are present in a given sample. 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
Mathematically,
number of molecules of carbon dioxide = number of moles of carbon dioxide ×6.022×10²³ molecules
Number of moles of carbon dioxide=3.4moles
Substituting the values in the above equation we get
number of molecules of carbon dioxide =3.4moles×6.022×10²³ molecules
number of molecules of carbon dioxide =2.047×10²⁴
Therefore, 2.047×10²⁴ molecules are found in 3.4 moles of carbon dioxide.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
Suppose Rutherford's lab was 10 meters (m) long and the speed of an alpha particle is 3.0x10^8 meters per second (m/s). How much time would he plan on the alpha particles taking to move from the alpha particle source to the gold foil target? Write it in a mathematical equation
Answer:
t = d/v , 33.3 ns
Explanation:
Since distance, d = vt where v = speed and t = time taken to cover the distance.
Since the distance, d covered by the alpha particle is the length of Rutherford's lab which is 10 m long and the speed of the alpha particle is v = 3 × 10⁸ m/s, the time, t it takes the alpha particle to move from the alpha particle source to the gold foil target is thus
t = d/v
= 10 m/3 × 10⁸ m/s
= 10/3 × 10⁻⁸ s
= 3.33 × 10⁻⁸ s
= 33.3 × 10⁻⁹ s
= 33.3 ns