Answer:
High pressures and hot temperatures force molten rock to the surface.
Explanation:
In Mount St. Helens' case, an oceanic plate called Juan de Fuca slips under the North American plate, creating the Cascadia subduction zone. A continental arc brews adjacent to the subduction zone, where high pressures and hot temperatures force molten rock to the surface. The result is a chain of volcanoes.
How many grams of octane (C8H18) must be burned to produce 300.0g of CO2?
2 C8H18 + 25 O2 → 16 CO2 + 18 H2O
Answer:
[tex]m_{C_8H_{18}}=85.67gC_8H_{18}[/tex]
Explanation:
Hello there!
In this case, according to the given combustion reaction of octane, it is possible for us to perform the stoichiometric method in order to calculate the mass of octane that is required to consume 300.0 g of oxygen by considering the 2:25 mole ratio, and the molar masses of 114.22 g/mol and 32.00 g/mol respectively:
[tex]m_{C_8H_{18}}=300.0gO_2*\frac{1molO_2}{32.00gO_2}*\frac{2molC_8H_{18}}{25molO_2}*\frac{114.22gC_8H_{18}}{1molC_8H_{18}} \\\\m_{C_8H_{18}}=85.67gC_8H_{18}[/tex]
Regards!
Which of these is a good source of protein?
А
rice
B
bread
с
beans
D
quinoa
Answer:
beans
Explanation:
Only electrons in the __________ orbital can form chemical bonds.
Answer:
Electrons in sigma bonds remain localized between two atoms. Sigma bond results from the formation of a molecular orbital by the end to end overlap of atomic orbitals. Electrons in pi bonds can become delocalized between more than two atoms. Pi bonds result from the formation of molecular orbital by side to side overlap of atomic orbitals.
How would you prepare 500 ml of the following solutions : Sodium succinate buffer (0.1 mol/dm3 pH 5.64)
Answer:
8.10g of sodium succinate must be added and 247mL of 0.1M HCl adding enough water until make 500mL
Explanation:
Succinic acid has a pKa₂ of 5.63
To solve this question we must find the amount of sodium succinate and 0.1M HCl that we have to add using H-H equation:
pH = pKa + log [A-] / [HA]
5.64 = 5.63 + log [Na₂Succ.] / [HSucc⁺]
0.01 = log [Na₂Succ.] / [HSucc⁺]
1.0233 = [Na₂Succ.] / [HSucc⁺] (1)
As:
0.1M = [Na₂Succ.] + [HSucc⁺] (2)
Replacing (2) in (1):
1.0233 = 0.1M - [HSucc⁺] / [HSucc⁺]
1.0233[HSucc⁺] = 0.1M - [HSucc⁺]
2.033[HSucc⁺] = 0.1M
[HSucc⁺] = 0.0494M
[Na₂Succ] = 0.0506M
Both [Na₂Succ⁺] and [HSucc⁺] ions comes from the same sodium succinate we have to find the moles of sodium succinate in 500mL of 0.1M. Then, based on the reaction:
Na₂Succ + HCl → HSucc⁺ + Cl⁻
The moles of HCl added = Moles HSucc⁺ we need:
Moles Na₂Succ:
0.500L * (0.1mol/L) = 0.0500 moles
Mass -Molar mass sodium succinate: 162.05g/mol-:
0.0500mol * (162.05g/mol) = 8.10g of sodium succinate must be added
Moles HCl:
0.0494M * 0.500L = 0.0247 moles HCl * (1L / 0.1mol) = 0.247L =
And 247mL of 0.1M HCl adding enough water until make 500mL
What is the initial and final mass of the zinc and copper?
Answer:the final mass of copper is 3.84 g. There was an increase in mass of 1.84 g from the initial mass of 2.0 g.
Explanation:
sodium bicarbonate =sodium carbonate + water + carbon dioxide gas
Answer: NaHCO3 = Na2CO3 + H2O + CO2
As the temperature in a sample of gas molecules increases, which of the other properties of the gas molecules could be caused to increase or decrease?
2+4 help please i will fail 6th grade
Answer:
6
Explanation:
lol
what are the iupac name in yhis picture
Answer:
3-propyl-hepetene.
Explanation:
Hello there!
In this case, according to the given structure wherein an alkene is shown, due to the double bond; as we need to figure out the name we should first number the chain by starting on the bottom carbon having the double bond and ending on the left side as it is the longest chain (parent chain) having seven carbon atoms.
Moreover, we can find a propyl substituent on the third carbon and therefore, the resulting name is:
3-propyl-hepetene.
In agreement to the IUPAC rules.
Best regards!
Mendeleev found that the properties of the known elements followed a pattern that repeated every
a.7 elements.
b.5 elements.
c.14 elements.
d.10 elements.
Answer:
14 elements
I hope this is correct answer please follow me
Answer:
The answer will be A. 7 elements
Explanation:
I took a test and I got it right hope this helps<3 ^^
A certain reaction has an activation energy of 51.02 kJ/mol. At what Kelvin temperature will the reaction proceed 4.50 times faster than it did at 365 K
Answer:
[tex]T_2=400.73K[/tex]
Explanation:
From the question we are told that:
Activation energy [tex]E_a= 51.02 kJ/mol.=>51.02*10^3J/mol[/tex]
Reaction Ratio [tex]\triangle K=4.50[/tex]
Initial Temperature [tex]T_1=365K[/tex]
Generally the equation for Final Temperature [tex]T_2[/tex] is mathematically given by
[tex]log \triangle K=\frac{E_a}{2.303R}*(\frac{T_2-T_1}{T_1T_2})[/tex]
Where
[tex]R=Gas constant[/tex]
[tex]R =8.3143[/tex]
Therefore
[tex]log 4.50=\frac{51.2*10^3}{2.303*8.31432}*(\frac{T_2-365}{365*T_2})[/tex]
[tex]log 4.50=7.328*\frac{T_2-365}{T_2}[/tex]
[tex]0.0892=\frac{T_2-365}{T_2}[/tex]
[tex]0.0892T_2=T_2-365[/tex]
[tex]365=T_2-0.0892T_2[/tex]
[tex]365=0.91T_2[/tex]
[tex]T_2=\frac{365}{0.91}[/tex]
[tex]T_2=400.73K[/tex]
The electron configuration of an atom tells us how many electrons are in each orbital.
a. True
b. False
Answer:
a. True
Explanation:
Take for example the electron configuration of nitrogen:
N ⇒ 1s² 2s² 2p³
The numbers in superscript tell us the number of electrons in each orbital. This is true for all elements. In this case we can see that nitrogen has 2 electrons in the 1s orbital, 2 other in the 2s orbital, as well as 3 electrons in the 2p orbitals.
can someone answer this
Which best describes the total mass of substances before and after a
combustion reaction?
A. The mass is the same because atoms are not created or
destroyed.
B. The mass is greater after the reaction because the number of
atoms increases.
C. The mass is the same because the molecules do not change.
D. The mass is less after the reaction because gases are produced.
Answer:
B. The mass is greater after the reaction because the number of
atoms increases.
What is the correct molecular geometry for NBr2F?
Answer:
Molecular geometry of o3
Ozone has three electron groups around the central oxygen, so has the trigonal planar electron geometry. The molecular geometry is bent: The Effect of Lone Pairs (contd.) With four electron groups (tetrahedral electron geometry), there can be one or two lone pairs around the central atom.
can you plz help me plz
Read about reverse osmosis and multistage flash distillation .Then identify at least three advantages and three
disadvantages for each process
Answer:
Meaning, Advantages & Disadvantages of - Osmosis, Multiflash Distillatiob
Explanation:
Osmosis is movement of solvent (like water) through semi permeable membrane (like living cell) into solution of higher solute concentration.Advantages - It assists equalising concentration of solute on two sides of membrane. Reverse Osmosis is used for efficient water softening, it is easy to maintain.
Disadvantages - It needs a lot of energy. A lot of pressure is required for deionisation. Water acidity level increases, as minerals get deionised.
Multistage flash distillation refers to desalination water distilling seawater, by flashing water portions in steams in various stages of concurrent heat exchangers.Advantages - Its Cost efficient , distillation uses waste heat. It has High gain output ratio. Quality of feedwater is less significant, compared to reverse osmosis.
Disadvantages - It has high operating cost in case of waste heat unavailability. High temperature imply high corrosion & scale formation.
which one of the following is not equal to 100 meters
it process information and sends instruction? A. brain B. kidney C. heart D. lungs
Answer:
A. brain
Explanation:
every instruction to us is sent by brain
Answer:
A. Brain
Explanation:
It assembles the messages in a way that has meaning for us, and can store that information in our memory.
How many protons are in the isotope 231/91Pa
PLEASE HURRY IM TIMED I WILL GIVE BRAINYST (if correct)
What is typical of a grassland? (Select all that apply.)
many trees
grass
wide, open areas
lakes
Answer:grass and wide open areas
Explanation: grassland- large open area of country covered with grass, especially one used for grazing.
Answer:
i needed the answer to this one too
Explanation:
Which of the following is a characteristic of scientific investigation? Group of answer choices It is based on opinion. It is replicable. It is subjective. It is biased.
Answer:
[tex]Every science experiment should follow the basic principles of proper investigation so that the results presented at the end are seen as credible.}}}
Observation and Hypothesis. ...
Prediction and Modeling. ...
Testing and Error Estimation. ...
Result Gathering and Presentation. ...
Conclusions. ...
Law Formation.
Hope it help
Answer:
It is replicable.
Explanation:
An opinion is just that. Subjective is again an opinion based on the circumstances. Biased is once again a person's opinion and how they believe.
Science is meant to be replicable. Meaning you should be able to achieve the same results based on completing the experiment the exact same way.
A helium-filled balloon contains 0.16 mol He at 101 kPa and a temperature of 23°C. What is
the volume of the gas in the balloon?
V = 3.9 L
Explanation:
Given:
T = 23°C + 273 = 296K
n = 0.16 mol He
P = 101 kPa = 0.997 atm
R = universal gas constant = 0.08205 L-atm/mol-K
V = ?
Using the ideal gas law,
PV = nRT
V = nRT/P
= (0.16 mil He)(0.08205 L-atm/mol-K)(296K)/(0.997 atm)
= 3.9 L
Carbon-14 has a half-life of 5,730 years. It is used in "carbon dating" to determine the age of once living organisms. How much of a 144 gram sample of C-14 will remain after 17,190 years have past.
Answer:
18 grams
Explanation:
Because 17,190 yrs divided by the amount of years it takes for a half-life to occur is 3. So 3 half life’s happen, so you divide 144/2 once, equaling 72. You divide 72/2 again (another half-life) and you get 36. You then calculate the third half life by dividing 36/2 which equals 18 grams.
Answer:
5730
Explanation:
Answer to Founders Education:)
If the temperature of a gas in the can increases then....
The pressure would increase
OR
The pressure would decrease
Answer:
the pressure would increase with the temperature if it gets to hot the can will explode
Be sure to answer all parts. Determine the electron-group arrangement, molecular shape, and ideal bond angle for the following molecule: SO3 Electron-group arrangement: V-shaped (bent) trigonal planar trigonal pyramidal seesaw Molecular shape: bent square pyramidal trigonal planar trigonal pyramidal Ideal bond angle: degrees
Answer:
trigonal planar
Explanation:
The molecule SO3 is of the type AX3. The molecule is symmetrical and non polar.
There are three regions of electron density in the molecule. This corresponds to a trigonal planar geometry. This means that the three oxygen atoms are arranged at the corners of a triangle. The bond angle is 120 degrees.
What is [H⁺] in a 0.330 M solution of acrylic acid, CH₂CHCOOH (Ka = 3.16 × 10⁻⁵)?
Answer:
[H⁺] = 3.23x10⁻³ M
Explanation:
For a weak monoprotic acid, such as acrylic acid, we can calculate [H⁺] using the following formula if the solution concentration is significantly higher than the Ka:
[H⁺] = √(C * Ka)Where C is the weak acid concentration.
We input the data:
[H⁺] = [tex]\sqrt{0.330 M * 3.16x10^{-5}}[/tex]And solve for [H⁺]:
[H⁺] = 3.23x10⁻³ MA closed flash contains 0.60 moles of xe, 0.50 moles of h2, and 0.40 moles ar. if the total pressure is 1.5 atm, what is the partial pressure of h2?
Answer:
0.50 atm
Explanation:
Step 1: Calculate the total number of gas moles
The total number of moles is equal to the sum of the number of moles of each gas.
n = nXe+ nH₂ + nAr
n = 0.60 mol + 0.50 mol + 0.40 mol = 1.5 mol
Step 2: Calculate the mole fraction of hydrogen
The moe fraction of hydrogen is the quotient between the number of moles of hydrogen and the total number of moles.
ΧH₂ = 0.50 mol / 1.5 mol = 0.33
Step 3: Calculate the partial pressure of hydrogen
Given the total pressure (P) is 1.5 atm, we can calculate the partial pressure of hydrogen using the following expression.
pH₂ = P × ΧH₂
pH₂ = 1.5 atm × 0.33 = 0.50 atm
What is the mass of 4 × 1015 atoms of nickel
(Ni)?
Answer in units of g.
what is solar system
Answer:
Explanation:
The Solar System is the gravitationally bound system of the Sun and the objects that orbit it, either directly or indirectly. Of the objects that orbit the Sun directly, the largest are the eight planets, with the remainder being smaller objects, the dwarf planets and small Solar System bodies