Which forms of energy are released by a burning candle? (2 points) a Light energy and chemical energy b Light energy and heat energy c Heat energy and electrical energy d Mechanical energy and heat energy

Answers

Answer 1
B. Light energy and heat energy!

This is because the thermal energy which is the heat. As you know fire heats up and burns, a lit candle would do just the seem. Also the fire is bright enough to light up an area!
Answer 2

Answer:

light and chemical energy

Explanation: mark me brainliest please


Related Questions

The sum of all forces acting on an object

Answers

Answer:

The sum of all forces acting on an object is net force

Which one of the following is an example of a difficulty caused by thermal
expansion?
O A. The siding on a house buckles on a hot day.
OB. Watery iced tea
OC. Smog in the air during summer heat
OD. lce cream not getting hard

Answers

Answer: A

Explanation:just passed it

Answer:

A. The siding on a house buckles on a hot day

Explanation:

The key word in this question is EXPANSION. Without even knowing the siding expands causing it to buckle when it's hot, you can use process of elimination. It can't be answer B because watered down iced tea would most likely be as a result of the ice melting which is the opposite of expanding. It can't be C because air is not solidified and therefore can't expand. Lastly, D cannot be it because ice cream expands when cold, causing it to become hard. If it's not hardening then it's not expanding. This is also the correct answer on a p e.x

What is the speed of a car that has traveled 100 miles in 20 hours?
|

Answers

Answer:

5 mph

Explanation:

100 miles, 20 hours (divide by 2)

50 miles,    10 hours (divide by 2)

25 miles,    5 hours (divide by 2)

divide both sides by 5

5 miles,     1 hour

Answer:2

Explanation:

What is the simplest whole-number ratio of atoms in a molecule or formula unit called?
O the molecular fomula
O the molar mass
O the percent composition
O the empirical formula

Answers

Answer:

the empirical formula

Explanation:

I remember learning this last year.

Answer:

the empirical formula

Explanation:

Explain why a flash of green light made flubber so energetic

Answers

Answer:

The flash of green light may give off some type of energy that only emits from green light which probably energizes the Flubber

Explanation:

A flubber is a rubber like polymer that absorbs and amplifies energy. A flubber absorbs energy from a light source and electrons present in it are excited in order to emit light of higher wavelength. The green light absorbed by the flubber to emit longer wavelength of light emitting more energy.

Intermolecular forces do not have any effect on determining the physical properties of
substances such as surface tension and melting point.
True or false

Answers

Answer:

False

Explanation:

The physical properties of melting point, boiling point, vapor pressure, evaporation, viscosity, surface tension, and solubility are related to the strength of attractive forces between molecules. These attractive forces are called Intermolecular Forces.

d = 24 g/ml
v = 1200 ml
m = ?

Answers

Answer:

28,800 g

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question we have

mass = 24 × 1200

We have the final answer as

28,800 g

Hope this helps you

What do both plants and animal cells break down for energy?

Answers

Answer:

both plant and animal cells must break down food molecules to get energy from them

Plants and animal cells break down stores glucose & oxygen for energy.


An atom with 25 protons and 27 electrons has a charge of +

True

False??

Answers

Answer:

Unless you mistyped the question, the answer should be 25+

A whale is swimming in the ocean. It communicates with another whale by sending out a sound. Which of the following best
describes how the sound gets to the other whale?
A.
All of the sound absorbed by water changes to heat before getting to the other whale.
В.
The sound is transmitted through water until it reaches the other whale.
C.
All of the sound is diffused in
the water until only a faint sound reaches the other whale.
.D
The sound is reflected in the water before it gets to the other whale.

Answers

Answer:

A.

The sound is transmitted through water until it reaches the other whale.

Explanation:

When one whale makes a sound, the sound is transmitted through water until it reaches the other whale. The sound causes a ripple-like effect in the water, producing waves that travel in the water. The waves are heard in all directions. This is why humans can hear the sounds animals make underwater.

The statement which best describes how the sound gets to the other whale is that all of the sounds absorbed by water change to heat before getting to the other whale. Thus, the correct option for this question is A.

How sound may transmit from one place to another?

The transmission of sounds is generally carried out through a medium in the form of waves. These sound waves involve the pattern of disturbance caused by the movement of energy.

In an aquatic environment, when one whale successfully constructs a sound, the sound is effectively transmitted through the medium that is known as water.

It remains in the form of waves until it reaches the other whale. The sound in a waveform provokes a ripple-like effect in the water and travels in the water. The waves are effectively heard in all directions.

Therefore, the correct option for this question is A.

To learn more about Transmission of sound in water, refer to the link:

https://brainly.com/question/18451537

#SPJ6

How do you know if a compound is covalent

Answers

If a compound is made from two non-metals it’s bonding will be covalent

Answer:

Compounds containing two elements (binary compounds) can either have ionic or covalent bonding. If a compound is made from a metal and a non-metal, its bonding will be ionic. If a compound is made from two non-metals, its bonding will be covalent.

HELP!! ASAP!! WILL MARK BRAINLIEST!!!




What are the only elements that make up organic compounds?
Question 2 options:

A)

Carbon, hydrogen, oxygen, and nitrogen

B)

Germanium, hydrogen, potassium, and nitrogen

C)

Carbon, hydrogen, lithium, and silicon

D)

Silicon, hydrogen, carbon, and nitrogen

Answers

The answer is A :) hope this help

The only elements that make up organic compounds are in option A. Carbon, hydrogen, oxygen, and nitrogen.

Organic compounds are compounds that primarily consist of carbon and hydrogen atoms. However, organic compounds can also contain other elements such as oxygen and nitrogen, which are commonly found in biological molecules. Carbon forms the backbone of organic compounds, providing the structural framework, while hydrogen is frequently bonded to carbon. Oxygen and nitrogen are also essential elements in organic compounds, participating in various functional groups and forming bonds with carbon and hydrogen.

Therefore, option A (Carbon, hydrogen, oxygen, and nitrogen) is the correct choice as it includes the elements that are predominantly found in organic compounds.

Learn more about organic compounds here:

https://brainly.com/question/13508986

#SPJ 2

Explain how cross cutting principles (intrusions, inclusions, faults) help to determine the relative age of a rock layer.

Answers

Answer:

The principle of cross-cutting relationships states that a fault or intrusion is younger than the rocks that it cuts through. ... So the fault must be the youngest formation that is seen. The intrusion (D) cuts through the three sedimentary rock layers, so it must be younger than those layers

Explanation:

40 points!
Describe One Front It Forms with Another Air Mass
Continental Polar:
Continental Tropical:
Maritime Polar:
Maritime Tropical:

Answers

Answer:

cold front, cold front, warm front, cold front, warm front, also low, low, high, low, high air presure

Explanation:

Which of the following shows the correct order of the levels of classification form Largest to smallest

Answers

could you put the answee choicesv

Give an example of a trait and explain how a genetic trait is passed down from
parent to offspring in animals.
Your answer

Answers

Explanation:

Parents pass characteristics such as hair color, nose shape, and skin color to their offspring. Not all of the parents' characteristics will appear in the offspring, but the characteristics that are more likely to appear can be predicted.

I'm just trying to answer questions. T^T

Need help. Is this correct

Answers

Answer:

Yes, that is correct!

Explanation:

Answer:

Yes

Explanation:

A covalent bond consists of the mutual sharing of one or more pairs of electrons between two atoms. These electrons are simultaneously attracted by the two atomic nuclei. A covalent bond forms when the difference between the electronegativities of two atoms is too small for an electron transfer to occur to form ions.

is the electrolysis of water an oxidation-reduction reaction??

Answers

Answer:

Yes

Explanation:

Electrolysis is an example of redox reaction because reduction takes place at cathode and oxidation takes place at anode and both of these reactions take place simultaneously.

A golfer hits a ball (m = 50. G) causing it to the leave its fairway lie with a velocity of 32 m/s. Determine the change in momentum of the ball. If the ball strikes the club face for only .05 s, what force is applied by the club to the ball?

Answers

Answer:

gravity I not that sure with the answer

whether the solution is acidic or basic And how much if we dissolve 6 grams of nitric acid and make 500cm3 of solution helpp pleasee

Answers

Answer:

i have no clue good luck

Explanation:

Many plants in rainforests have leaf tips that come to a point, so precipitation drains off the leaf. This helps to keep the plant safe from harmful germs. Based on this info, what resource is prevalent in a rainforest?

Answers

Answer:

rainfall/water

Explanation:

The possession of drip tips by the leaves of plants in the rainforest is a form of adaptation against high rainfall. Without the drip tips on leaves, water will persist on the surface of leaves, and in conjunction with the warm climate, promotes the growth of pathogens such as fungi and bacteria.

Hence, the possession of drip tips on leaves is an indication of the prevalence of water in the rainforest region.

8.
A student measured the mass of a rubber stopper to be 6.00 grams. When it was placed into a
graduated cylinder that initially had 2.0 mL of water, the water went up to the 5.0 mL of water. What is
the density of the rubber stopper?
a) 3.0 g/mL b) 1.2 g/mL
d) 0.60 g/mL
e) none of these
$) 2.0 g/mL

Answers

Answer:

A

Explanation:

Because you subtract the amount it was after it want up by the initial amount

Which type of mass movement is the most destructive

Answers

Answer:

Landslide

Explanation:

its most destructive because its various rocks falling and it goes blammow

Answer: the answer is C

Landslide

Explanation:

The maximum allowable concentration of Pb2+ ions in water in a local community is 1.51 x 10-8 M. Could a chemist use 2.00 mL of 0.12 M KBr solution on a 5.00 mL sample of tap water to prove through a precipitation reaction that the water supply is safe? Show all work and reasoning

Answers

Answer:

The water supply is not safe.

Explanation:

Ionically, the reaction is;

Pb^2+(aq) + 2Br^-(aq) -------> PbBr2(s)

Amount of Br^- reacted = 2/1000 * 0.12 = 2.4 * 10^-4 moles

From the reaction equation;

1 mole of Pb^2+ requires 2 moles of Br^- for complete precipitation

x moles of Pb^2+ requires 2.4 * 10^-4 moles of Br^-

x = 1 * 2.4 * 10^-4 /2

x = 1.2 * 10^-4 moles of Pb^2+

Concentration of Pb^2+ precipitated from 5ml of tap water =  1.2 * 10^-4 * 1000/5

Concentration = 2.4 * 10^-2 M

The amount of  Pb^2+ found in the water is greater than the maximum allowable concentration of Pb2+ ions in water in a local community which is 1.51 x 10-8 M. Therefore, the water supply is not safe.

how many neutrons does this atom have?

A. 4
B. 6
C. 10
D. 14



((help. I'm timed so please be quick ;-;​

Answers

Answer:

the ander is B. 6 neurons

Answer:

10

Explanation:

07-PS1-6 In a laboratory experiment that measures heat energy changes in 1 point
a chemical reaction, what is the most essential piece of equipment?*
Triple Beam Balance
Calculator
Hot Plate
Thermometer
Need answer now!

Answers

Thermometer
Probably a digital thermocouple with high resolution

what is the chemical formula of tetranitrogen tetrabromide?

Answers

S4N4 I couldn’t find that exact one but I found Tetranitrogen tetrasulfide so try that.

please Help and Thanks!

Answers

The one that’s already circled in the picture (B)

What is the mass of 5.4 x 10^24 molecules of HCl?

Answers

Answer:

I KNOW

Explanation:

The correct name for P5O2 is

Answers

Answer:

phosphorous(iii) oxide

Explanation:

Hope this helps! :)

Other Questions
URGENT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ____________________ Total Cost of Computer Repair = $1,444.50Shipping = 2 percent of Total CostIf Sarah wanted to include a 15 percent gratuity, based on the total cost of the computer repair, excluding shipping, how would you find her new total cost? Select the correct answer.Which of the following types of dance has very strict rules and techniques?A.Hip HopB.BalletOC.TapOD.All of the aboveResetNext 1) Stalin wanted what was best for the people and did whatever he could to make sure they had what they needed to live a comfortable life.A. True B. False2) _____ is a government in which the state or a dictator holds absolute control over the peoples public and private lives.A. Democracy B. Plutocracy C. TotalitarianismD. MonarchyE. Theocracy HEllpppSoon the sun would go down. What is the verb mood of the sentence ?A)imperative,B) indicative,C) conditionalD)subjunctive In muscle tissue, what is the reactant of lactic acid fermentation and the product that builds up during intense exercise? jojos bizzare adventure A band earned $550.00 for playing at a concert. Their manager takes 15% of the money earned for each show and the band is donating 20% of the money earned to charity. How much money is left for the band to split? One way to alert bears of your presence is toA. Carry a special whistle that can only bears can hearB.shout or sing loudly C.throw rocks D.hike alone Which isomer of 1-bromo-2-tert-butylcyclohexane reacts faster when refluxed with potassium tert-butoxide?Draw the structure of the expected major product from the faster reacting compound. Where is nature can you find isomers? 11 points!!! Here are the instruction plz help asapPart 1You will need to measure five different people. Record your measurements on a piece of paper. Using a tape measure or ruler, measure the length (in inches) of a persons left foot and then measure the length (in inches) of that same persons forearm (between their wrist and elbow). Refer to the diagrams below. You will have two measurements for each person.(An easy way to measure the length of a foot is to have your subject stand on a piece of paper. Then, trace their foot and measure the outline once they move off the paper.)To measure the forearm, measure inside the arm, between the wrist and the elbow.Part 2Organize your data and find the rate of change.Create a table of the measurements for your data. Label the forearm measurements as your input and the foot measurements as your output.Select two sets of points and find the rate of change for your data.Describe your results. If you had to express this relation as a verbal statement, how would you describe it?Part 3Compare rates of change.The equation below can be used to find the length of a foot or forearm when you know one or the other.(length of the foot) = 0.860 (length of the forearm) + 3.302If you let y = length of the foot and x = length of the forearm, this equation can be simplified toy = 0.860x + 3.302.Using this equation, how long would the foot of a person be if his forearm was 17 inches long?What is the rate of change of the equation from Part A?Compare the equation from Part A to your data. Are they the same? Which has a greater rate of change? Why do you think the values are different?Is the relation in your data a function? Why or why not? Could the equation in Part A represent a function? Why or why not? Explain your answer.For this option you will submit the details from all three parts. Submit your measurements, the table, and description that you created in Parts 1 and 2. Submit your answers to the questions from Part 3. Which of the following will help you and your family eat the proper amount of food?A.) A grocery adB.)A grocery budgetC.)A food labelD.)A new recipe Natural light always offers a photographer our flexibility and it's easier to work withTrue or False . Naty bought a dress for $24.95 and a skirt for $14.95. The sales clerk said the total cost including 9.5% sales tax was 49.40. Below are the steps the clerk completed. Step 1: 24.95 + 14.95 = 39.90 Step 2: 39.90 + 9.5 = 49.40 Are the clerk's steps correct? If she is incorrect, identify her mistake and explain her error. Explain in writing how to accurately calculate the sales tax, total cost, and state the correct total. ( Round final answer to the nearest hundredth) Lab - Wave Properties in a Spring11-05The wave characteristics you will observe in this lab are common to all waves (water, light, sound,etc.). Use your prior knowledge and the book to fill in the following blanks, then go in the hall andperform the lab.A wave is a disturbance that moves through (propagates) through empty space or through a_____________. There are two types of waves. A _____________________ wave requiresmatter to travel. List some examples of this type:A _____________________ wave does not require a medium. Examples include:In order to start and transmit a mechanical wave, a source of _____________ and an_______________ medium are required. A single disturbance is referred to as a_______________, and a series of disturbances is a wave __________.The questions in bold are those you should observe directly. Others will be answered using the book.A. TYPES OF MECHANICAL WAVES: In the hall, stretch the slinky on the floor until it isstretched (but still loose). Practice sending single pulses down the slinky by popping your wristfrom the center to the side and back to the center. Then send a continuous wave train along asyour partner holds the other end still. A piece of ribbon should be tied to one coil. Watch themotion of this ribbon (representing a particle) as the wave travels through the spring.In this type of wave, the particles move (perpendicular, parallel)to the direction the wave travels. This type of wave is called a __________________ wave.Its pulses are called ________________ and ________________.Now send a pulse by quickly pushing the spring forward and pullingit back, as shown. This type of wave is called _______________. Watch the motion of the ribbon.In this type, the particles move _____________ to the direction the wave travels. Its pulsesare called _____________ and _____________. Label each.Note that all waves transfer _____________ without transferring _______________. Inmechanical waves, particles of the medium vibrate back and forth in simple harmonic motion whilethe disturbance (or _____________) moves from one place to another.B. WAVE SPEEDSend a large pulse, followed by a small one. Does one pulse catch up to the other? ______(Hint: The person who sends these waves should watch how the waves look when they return. Makesure that both pulses are large enough initially to make it back to the sender!) The size of thepulse is called the __________________ of the wave. Did the size affect the speed? ______Generate a single transverse pulse in the slinky, keeping the stretch constant. Using a stopwatch,time the journey of the pulse from one end to the other and back again. Take the average ofseveral trials. _________Without changing your positions on the floor (therefore keeping the _____________ the pulsetravels the same), pull the slinky tighter using only about 3/4 of the coils. This makes a completelydifferent medium through which the pulse will travel. Time the journey as before. ___________Does the kind of medium affect the speed of the pulse? ___________ Lab Wave Properties in a Spring ____________________PHYSICSFundamentals 2004, GPB11-06C. WAVELENGTH AND FREQUENCYShake the slinky back and forth steadily to send atransverse wave train while your partner holds the other end still. On the diagram, label wavelength(- Greek letter lambda). The frequency of the wave depends on how fast you shake the slinky.Shake it regularly but slowly, then regularly but rapidly.Higher frequency waves are generated by shaking the spring (slowly, rapidly). High frequencywaves have (short, long) wavelengths, and low frequency waves have __________.The speed of a wave in any medium is equal to the _______________ of the wave X________________. This wave equation ___________________ shows that f and are______________ proportional. Write the units for each of the variables in this equation. Please help me Do you agree that workers need to abide by what "Business at War" stands for?(Answer in 2-4 sentences. Which is most likely a chemical property? A) Oxidation state: the charge an atom has if it was bonded ionically to other atoms Different oxidation states indicate different abilities to bond with other atoms. B) Melting point: the temperature at which a solid turns into a liquid. Different substances have different melting points. C) Density: the amount of a substance that fits in a certain volume. Different states of matter of the same substance can have different densities. D) Conductivity: the ability to transfer electrical charges. Conductivity is different in different substances. can someone help with with some answers?! :-) please! i need this done in a hour :-( help!!