Answer:
nuclear fusion
Explanation:
gravity pulls gas and dust together a protostar forms as mass increases nuclear fusion begins under high pressure
How does wavelength affect the pitch of a sound?
a. the shorter the wavelength, the lower the pitch
b. the longer the wavelength, the lower the pitch
c. the taller the wavelength, the lower the pitch
d. none of these
Answer:
D
Explanation:
because the higher the wavelength the shorter the pitch and the shorter the wavelength the higher the pitch
what is the most likely arrangement of particles in a liquid?
O Farther apart and hire an
energy than those in a gas
O Farther apart and lower energy than those in a solid
O Closer together in lower and energy than those in gas
O Closer together and Lauren energy than those in a solid
Answer:
c. closer together and lower in energy than those in a gas.
Explanation:
In the different states of matter, the arrangement of particles and the kinectic energy that exists in the state of matter varies depending on which state the matter is in.
The particles of Solid are denser and closer than that of liquid. In solid state, the force of attraction between the particles are greater than the kinectic energy of the particles in a solid matter. Therefore, the particles in solid matter are closer together than those in liquid and gas. And also, the energy is lower in Solid matter than those in liquid and gas.
Liquid on the other hand, has denser particles that are closer together than those in gas. Also, liquid particles has lower energy than those in gas.
Particles in gas are more freer and farther apart from each other than the particle sin solid and gas. Also, particles in gas is greater than those in liquid and solid.
Therefore, the likely arrangement of particles in a liquid is that they are:
c. closer together and lower in energy than those in a gas.
What term describes the state of matter in which the attractive forces between particles are the greatest?
liquid
solid
gas
metal
Answer:
I think it would be b
Explanation:
Not sure what to do here. It says to convert the following into formulas and states in an unbalanced equation. Please help!
Answer:
Ca2 solid state
H2O liquid state
Ca(OH)2 I believe this would be in solid state
H2 gas state
Explanation:
can a water cycle ever end
Answer:
No It cannot.
Explanation:
A water cycle does not have an end as it moves all around the earth
The process:
A water cycle can start by water evaporating through the sun's heat from a water bed, such as: Ocean, sea, pond etc.
The heat from the sun will turn the water into water vapour and will go up into the atmosphere.
The water vapor gets together with other vapors and forms clouds.
These clouds will move around the earth, once they are so full of water they drop the water to Earth in some form of precipitation. It could be rain, snow, sleet, or hail.
These water will form ponds or go back in the ocean and the process wil repeat again.
(I AM GIVING BRAINLIEST!!!!)
Before there is a transfer of charges between objects, they are uncharged. What does this mean?
A) There are more positive charges than negative charges.
B) There are more negative charges than positive charges.
C) The positive and negative charges are equal.
D) The positive and negative charges do not exist.
Answer:
C) The positive and negative charges are equal.
Explanation:
Ions can be made by single element or covalently bonded group of elements. The covalently bonded group of elements is called polyatomic ions or polyatomic atoms. The correct option are option C.
What is Ions?Any species that contain charge whether it is positive charge or negative charge is called ions. The example of polyatomic ions are sulfate, phosphate, nitrate etc.
Cation is the species that loose electron and attain positive charge while anion is a species which gain electron and attains negative charge so when anion and cation combine in fixed ration the the overall charge of the molecule is zero that is molecule is neutral, the charge over cation and anion is also called oxidation state.
Before there is a transfer of charges between objects, they are uncharged as the positive and negative charges are equal.
Therefore the correct option are option C.
To learn more about ions, here:
https://brainly.com/question/13692734
#SPJ2
please help me
four facts..please
The ability of an atom in a molecule to attract electrons is best quantified by the ________.
a. electron charge-to-mass ratio
b. electronegativity
c. first ionization potential
d. diamagnetism
e. paramagnetism
Answer:
b. electronegativity
Explanation:
The ability of an atom in a molecule to attract electrons is best quantified by the _Electronegativity_.
Electronegativity is the ability of an atom to attract a shared pair of electron which is loosely held. Polar molecules often possess such properties. The Halogen group (group 17) is famous for such property because it has the highest electronegativity in periodic table.
A 135 g sample of a metal requires 2.50 kJ to change its temperature from 19.5°C to 95.5°C to 100.0°C?
Answer:
0.23J/g°C
Explanation:
Given parameters:
Mass of sample = 135g
Amount of heat = 2.5kJ
Initial temperature = 19.5°c
Final temperature = 100°C
Unknown:
Specific heat capacity of the metal = ?
Solution:
The specific heat capacity of a substance is the amount of heat required to the raise the temperature of 1g of the substance by 1°C.
H = m C (T₂ - T₁ )
H is the amount of heat
m is the mass
C is the specific heat capacity
T₂ is the final temperature
T₁ is the initial temperature;
2.5 x 10³ = 135 x C x (100 - 19.5)
2500 = 10867.5C
C = [tex]\frac{2500}{10867.5}[/tex] = 0.23J/g°C
7. A gas takes up a volume of 15 liters, has a pressure of 3.3 atm, and a temperature of 299 K. If I raise the
temperature to 350 K and lower the pressure to 1050 mmHg, what is the new volume of the gas?
8. I have an unknown volume of gas held at a temperature of 115 K in a container with a pressure of 60.0
atm. If by increasing the temperature to 225 K and decreasing the pressure to 30.0 atm causes the volume
of the gas to be 25 liters, how many liters of gas did I start with?
9. A gas has a temperature of 14oC, and a volume of 5.5 liters. If the temperature is raised to 29oC and the
pressure is not changed, what is the new volume of the gas?
10. A gas that has a volume of 28 liters, a temperature of 65oC, and an unknown pressure has its volume
increased to 36 liters and its temperature decreased to 35oC. If I measure the pressure after the change to
be 2.0 atm, what was the original pressure of the gas?
Answer:
See explanation
Explanation:
7) P1 =3.3 atm
V1= 15 litres
T1 = 299 K
T2 = 350 K
P2 = 1050 mmHg/760 = 1.38 atm
V2?
From;
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V2 = P1V1T2/P2T1
V2 = 3.3 * 15 * 350/1.38 * 299
V2 = 17325/412.62
V2 = 42 litres
8) V1= unknown
T1= 115 K
P1 = 60 atm
T2= 225 K
P2 = 30 atm
V2 = 25 litres
From;
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
V1 = P2V2T1/P1T2
V1 = 30 * 25 * 115/ 60 * 225
V1 = 86250/13500
V1 = 6.4 litres
9) T1 = 14 + 273 = 287 K
V1 = 5.5 liters
T2 = 29 + 273 = 302 K
V2 = the unknown
From Charles law;
V1/T1 = V2/T2
V1T2 = V2T1
V2 =V1T2/T1
V2 = 5.5 * 302/ 287
V2 = 5.8 litres
10) V1= 28 litres
T1= 65 + 273 = 338 K
P1 = the unknown
V2 = 36 liters
T2 = 35 + 273 = 308 K
P2 = 2 atm
P1V1/T1 = P2V2/T2
P1V1T2 = P2V2T1
P1 = P2V2T1/V1T2
P1 = 2 * 36 * 338/ 28 * 308
P1 = 24336/8624
P1 = 2.82 atm
Which metal absorbs the greatest amount of heat energy
Answer:
This question is incomplete but the completed question is in the attachment below. And the correct is b
Explanation:
Specific heat capacity can be defined as the amount of heat required to raise to raise 1 kg of a substance by 1 kelvin. Thus, this means that when the specific heat capacity of a substance is high, it takes more energy to increase the temperature of that substance. This also means that when different substances are subjected to the same amount of heat, the substance with the higher specific heat capacity will absorb less heat; for example at a beach, water has a very high specific heat capacity, thus when the sand in the beach is hot, the beach water is still relatively cold.
From the description above, it can be seen that the metal with the least specific capacity will absorb the greatest amount of heat, thus the metal is lead with the specific heat capacity of 0.129 J/(g. °C).
If 22.5 L of nitrogen at 90 Kpa are compressed to 40 Kpa at a constant temperature. What is the new volume?
Answer:
51 L
Explanation:
Step 1: Given data
Initial volume of nitrogen (V₁): 22.5 LInitial pressure of nitrogen (P₁): 90 kPaFinal volume of nitrogen (V₂): ?Final pressure of nitrogen (P₂): 40 kPaStep 2: Calculate the final volume of nitrogen
The volume of a gas is inversely proportional to the pressure. If we consider nitrogen as an ideal gas at a constant temperature, we can find the final volume using Boyle's law.
P₁ × V₁ = P₂ × V₂
V₂ = P₁ × V₁ / P₂
V₂ = 90 kPa × 22.5 L / 40 kPa
V₂ = 51 L
How much ice could be melted at 0°C if 5200 joules of heat were added?
Answer:
0.02kg
Explanation:
Given parameters:
Amount of heat = 5200J
Unknown:
Mass of ice that would be melted at 0°C = ?
Solution:
To solve this problem, use the expression below;
H = mL
H is the heat
m is the mass
L is the latent heat of fusion of ice = 3.33 x 10⁵ J/kg.
Insert the parameters and solve for m;
5200 = m x 3.3 x 10⁵
m = [tex]\frac{5200}{3.33 x 10^{5} }[/tex] = 0.02kg
What is the expected major organic product from the treatment of 4-methyl-2-pentyne with excess hydrogen in the presence of a platinum catalyst?
a. (E)-4-methyl-2-pentene
b. (Z)-4-methyl-2-pentene
c. (E)-2-methyl-2-pentene
d. (Z)-2-methyl-2-pentene
e. 2-methylpentene
Answer:
(Z)-4-methyl-2-pentene
Explanation:
Hydrogenation is a syn addition. This implies that the hydrogen atoms add to the same face of the multiple bond.
Hence, if we have the alkyne, 4-methyl-2-pentyne which reacts with excess hydrogen in the presence of a platinum catalyst, we obtain (Z)-4-methyl-2-pentene since the hydrogen atoms add on the same side of the multiple bond.
How many liters of fat would have to be removed to result in a 5.2 lb weight loss? The density of human fat is 0.94 g/mL?
The body fat of humans can be measured by the density in grams per mL. The volume of the fat with a density of 0.94 g/mL and mass of 5.2 lb is 2.50 L.
What is volume?The volume is the factor of the dimension that inversely affects the density of the substance. The volume is given by the division of the mass by the density. It can be given in mL or cubic centimeters.
Given,
Mass of body fat = 5.2 lb
Density of human fat = 0.94 g/mL
At first, mass is converted from lb to grams as:
1 lb = 453.592 grams
So, 5.2 lb = 2358.68 grams
Secondly, volume is calculated as:
Volume = Mass ÷ density
V = 2358.68 grams ÷ 0.94 g/mL
= 2509.23 mL
Thirdly, volume from ml is converted to L as:
1 mL = 0.001 L
2509.23 mL = 2.50 L
Therefore, 2.50 liters of body fat has to be removed from the body.
Learn more about density and volume, here:
https://brainly.com/question/952755
#SPJ2
Electromagnetic waves are ? and have ?
more energy moving from left to right on the electromagnetic
Electromagnetic waves are
radiation diagram
shorter/less
o longer/more
shorter/more
longer/less
Answer:
longer/less
Explanation:
In moving from left to right on the periodic table, electromagnetic waves have longer wavelength and less energy.
The electromagnetic radiation diagram is made up of electromagnetic waves.
From left to right, the energy of the wave decreases. Waves at the left most edge have the highest energy. As we move rightward, the wavelength also becomes longer. The frequency also reduces. Wavelength and energy are inversely proportional.WHAT PROBLEMS DID PRESIDENT JEFFERSON HAVE WITH TRIPOLI AND HOW DID HE SOLVE THEM
Answer:
Although Thomas Jefferson came to power determined to limit the reach of the federal government, foreign affairs dominated his presidency and pushed him toward Federalist policies that greatly contrasted with his political philosophy. The first foreign episode involved Jefferson's war with the Barbary pirates. For the previous century or so, Western nations had paid bribes to the Barbary states, which would later become Morocco, Algeria, Tunis, and Tripolitania, to keep them from harassing American and merchant ships
Explanation:
PLS HELP
Which substance contains bonds that involve the transfer of electrons from one atom to another?
1. CO₂
2. HF
3. CH₄
4. K₂S
QUESTION 4
How many moles are in 3.2 x 1024 of CO2 molecules? (round answer to the correct number of sig figs)
Answer:
5.3 mol CO₂
General Formulas and Concepts:
Chemistry - Stoichiometry
Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
3.2 × 10²⁴ molecules CO₂
Step 2: Convert
[tex]3.2 \cdot 10^{24} \ mc \ CO_2(\frac{1 \ mol \ CO_2}{6.022 \cdot 10^{23} \ mc \ CO_2} )[/tex] = 5.31385 mol CO₂
Step 3: Check
We are given 2 sig figs. Follow sig fig rules.
5.31385 mol CO₂ ≈ 5.3 mol CO₂
The total length of
mid-ocean ridge spreading centers is about 80,000 km. The average
spreading rate of ridges is 1.25 cm/yr. Calculate the area of new
ocean crust that forms each year.
Answer: In fact, all of the major landforms that we find on the continents ... Mid-ocean ridges, also called seafloor-spreading centers, are long, ... 1 km = 100,000 cm or 1 x 105 cm ... a mid-ocean ridge with a SLOW spreading rate (1 to 5 cm/yr, full rate).
Explanation:
As the Earth's tectonic plates separate, new ocean bottom is generated along divergent plate borders, which are known as mid-ocean ridges. Massive basalt volcanic eruptions result from molten rock rising to the seafloor as the plates divide.
What is mid-ocean ridge?A mid-ocean ridge is a system of seafloor mountains formed by plate tectonics. It is typically about 2,600 meters deep and rises about 2,000 meters above the deepest part of an ocean basin. This feature occurs when seafloor spreading occurs along a divergent plate boundary. Mid-ocean ridges are geologically significant because they occur along the type of plate boundary that creates new ocean floor as the plates spread apart. As a result, the mid-ocean ridge is also referred to as a "spreading center" or a "divergent plate boundary." The plates separated at rates ranging from 1 cm to 20 cm per year.To learn more about Mid-ocean ridge, refer to:
https://brainly.com/question/1288447
#SPJ2
Sodium, potassium, and cesium belong to which group?
inner transition metals
halogens
alkali metals
Answer:
Alkali Metals
Explanation:
Which is an example of a beneficial mutation?
one that changes the color of a rabbit, allowing it to hide from predators.
one that results in lighter flower petal colors without changing the plant’s ability to reproduce
one that causes a person’s body to produce thick mucus that clogs the lungs
one that makes it easier for a corn plant to contract a disease
Answer:
A
Explanation:
Answer: a
Explanation: one that changes the color of a rabbit, allowing it to hide from predators.
if 15 grams of copper (II) chloride react with 20 grams of sodium nitrate, how much sodium chloride can be formed?
With ionic compounds, the ion charge is the same as the ___ number.
A. methylation
B. anion
C. cation
D. oxidation
Answer:
D. Oxidation
Explanation:
The oxidation state of a pure element is always equal to zero and the oxidation state for a pure ion is equivalent to its ionic charge.
What is the total number of electrons in a S2- jon?
1.
10
2.
14
16
4.
18
the answer is D) 18 electrons
One mole of an atom of a substance is equal to the:
a Gram atomic mass of the element
b Gram molecular mass of the element
C Atomic number of the element
d None of the above
One mole of an atom of a substance is equal to the gram molecular mass of the element. Therefore, the correct option is option B among all the given options.
What is mole?A mole is just a measuring scale. In reality, it's one of the International System of Units' seven foundation units (SI). When already-existing units are insufficient, new ones are created. The levels at which chemical reactions frequently occur exclude the use of grams, yet utilizing actual numbers of atoms, molecules, or ions would also be unclear.
A mole consists of precisely 6.022140761023 particles. The "particles" might be anything, from tiny things like electrons and atoms to enormous things like stars or elephants. One mole of an atom of a substance is equal to the gram molecular mass of the element.
Therefore, the correct option is option B among all the given options.
To learn more about mole, here:
https://brainly.com/question/15209553
#SPJ6
Give the name for the molecular compound with the the formula P2I4.
Answer:
Diphosphorus tetraiodide
Explanation:
Diphosphorus tetraiodide is an orange crystalline solid with the formula P2I4. It has been used as a reducing agent in organic chemistry. It is a rare example of a compound with phosphorus in the +2 oxidation state, and can be classified as a subhalide of phosphorus.
Can I please have brainliest?
The name of the molecular compound with the formula [tex]\rm P_2I_4[/tex] is diphosphorus tetraiodide.
The term "compound" refers to two or more elements joined together such that the elements have lost their individual identity in favor of a new set of properties.
The given molecular compound [tex]\rm P_2I_4[/tex] is diphosphorus tetraiodide.
This name is derived from the prefixes "di-" and "tetra-" which indicate that there are two phosphorus atoms and four iodine atoms in the molecule, respectively. The ending "-ide" is used to indicate that the compound is a binary compound consisting of two different elements.Therefore, diphosphorus tetraiodide is the name of the molecular compound with the formula [tex]\rm P_2I_4[/tex] .
Learn more about compound here:
https://brainly.com/question/14117795
#SPJ6
A nurse practitioner orders Medrol to be given 1.4 mg/kg of body weight. Medrol is an anti-inflammatory administered as an intramuscular injection. If a child weighs 71.6 lb and the available stock of Medrol is 20. mg/mL, how many milliliters does the nurse administer to the child? Express your answer to two significant figures and include the appropriate units.
The nurse give 2.3 ml Medrol to the child
Further explanationMass is one of the principal quantities, which is related to the matter in the object
The main mass unit consists of 7 units
kg, hg, dag, g, dg, cg, mg
Conversion :
1 Lb=0,453592 kg
For 71.6 lb :
[tex]\tt 71.6\times 0.453592=32.48~kg[/tex]
Medrol to be given 1.4 mg/kg of body weight, so amount for the child :
[tex]\tt 32.48~kg\times 1.4~mg/kg=45.472~mg[/tex]
The available stock of Medrol is 20. mg/mL, so the volume to the child :
[tex]\tt \dfrac{45.472}{20}=2.2736\approx2.3~ml[/tex]
A mass scale reads 10 kilograms on earth, what would it read on the moon?
If all of the electron groups around a single central atom are bonding, and the same outer atom is bonded to the central atom in each case, is the molecule polar, nonpolar, or does it depend on the identity of the outer atom?
Answer:
It depends on the identity of the outer atom
Explanation:
We must recall that the polarity of a molecule depends on difference In electronegativity between atoms as well as the shape of the molecule.
When a central atom has no lone pairs and all the groups in the molecule are bonding, the identity and arrangement of the outer atoms will determine the polarity of the molecule.
A polar molecule is formed by certain types of outer atoms arranged in certain ways around the periodic table and vice versa.
The identification of the outer atom determines whether the molecule is polar or non-polar. The CH4 compound, for illustration, is a non-polar compound.
There really is no dipole present here because the net dipole moments cancel one another out. As a result, the dipole moment is negligible.
The molecule CH3Cl, for instance, is a polar molecule. There is indeed a dipole force here, and the net polarization isn't zero.
As a result, it exhibits a dipole moment. As a result, the identification of the exterior atom determines whether the molecule is polar or non-polar.
Learn more:
https://brainly.com/question/15988737?referrer=searchResults