Which describes the molecule shown below?
A) Saturated Alkane
B) Saturated Alkene
C) Unsaturated Alkyne
D) Unsaturated Alkene
Please Help I'm stuck on this one!!!​

Answer:

true

Explanation:

This is true because elements aim to have a full octet of electrons in their outermost (also called valence) shell. Noble gases already have a full valence shell which is why the elements that are not noble gases aim to be like them.

Answer:

a) true

Explanation:

this is the answer coz elements aim to have a full octet of electrons in their outermost (also called valence) shell.

Answer:

See explanation below

Explanation:

IUPAC came up with the idea of an unambiguous system of nomenclature for organic compounds. This unambiguous system relates the structure of a compound with its name. Thus, IUPAC has established a worldwide standard for the unambiguous naming of organic compounds. Scientists all over the world can now have a uniform system of nomenclature for compounds in order to facilitate easy communication of scientific information.

The systematic names of the following compounds listed in the question are shown below;

(R)-2- butyl bromide has the systematic name (R)-2-bromobutane

(S)-2-butyl bromide has the systematic name (S)-2-bromobutane

This unified system of nomenclature avoids the confusion created by the use of different trivial names in deferent localities and by various scientific academies. This is a major advantage of the systematic nomenclature.

Answer:

Atomic radius of Strontium is 27.38pm

Explanation:

In a face-centered cubic structure, the edge, a, could be obtained using pythagoras theorem knowing the hypotenuse of the unit cell, b, is equal to 4r:

a² + a² = b² = (4r)²

2a² = 16r²

a = √8 r

As edge length of Strontium is 77.43pm:

77.43pm / √8 = r

27.38pm = r

Answer:

10.96 grams of compound C will be produced from 18.24 grams of compound A and excess compound B.

Explanation:

3A + 2B ⇒ 5C

By stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction) the following amounts of reagent and products participate in the reaction:

The excess reagent will be that which is not completely depleted during the reaction.

The amount of product obtained from the reaction will always depend on the amount of limiting reagent in the reaction. Then, being B the excess reagent and therefore A the limiting reagent and knowing that compound A has a molar mass of 159.7 g/mole and compound C has a molar mass of 57.6 g/mole, by stoichiometry the following mass amounts of A and C participate in the reaction:

Then it is possible to apply the following rule of three: if by stoichiometry of the reaction 479.1 grams of A produce 288 grams of C, 18.24 grams of A, how much mass of C does it produce?

[tex]mass of C=\frac{18.24 grams of A*288 grams of C}{479.1 grams of A}[/tex]

mass of C= 10.96 grams

10.96 grams of compound C will be produced from 18.24 grams of compound A and excess compound B.

Answer:

2.17x10⁻¹⁰ = Kb1

1.69x10⁻¹³ = Kb2

Explanation:

Oxalic acid, C₂O₄H₂, has two intercambiable protons, its equilibriums are:

C₂O₄H₂ ⇄ C₂O₄H⁻ + H⁺ Ka1 = 5.9x10⁻²

C₂O₄H⁻ ⇄ C₂O₄²⁻ + H⁺ Ka2 = 4.6x10⁻⁵

Oxalate ion, C₂O₄²⁻, has as equilibriums:

C₂O₄²⁻ + H₂O ⇄ C₂O₄H⁻ + OH⁻ Kb1

C₂O₄H⁻ + H₂O ⇄ C₂O₄H₂ + OH⁻ Kb2

Also, you can know: KaₓKb = Kw

Where Kw is 1x10⁻¹⁴

Thus:

Kw = Kb2ₓKa1

1x10⁻¹⁴ =Kb2ₓ4.6x10⁻⁵

And:

Kw = Kb1ₓKa2

1x10⁻¹⁴ =Kb1ₓ5.9x10⁻²

That is because the inverse reaction of, for example, Ka1:

C₂O₄H⁻ + H⁺ ⇄ C₂O₄H₂ K = 1 / Ka1

+ H₂O ⇄ H⁺ + OH⁻ K = Kw = 1x10⁻¹⁴

=

C₂O₄H⁻ + H₂O ⇄ C₂O₄H₂ + OH⁻ Kb2 = Kw × 1/Ka1

Answer:

211.4g/mol.

Explanation:

Data obtained from the question includes:

Mass of unknown compound = 0.98g

Mass of solvent = 10.30g

Molality = 0.45 M

Next, we shall determine the number of mole of the unknown compound present in the solution.

This can be obtained as follow:

Molality = mole /kg of solvent

Mole of the unknown compound =.?

Mass of solvent = 10.30g = 10.30/1000 = 0.0103Kg

Molality = 0.45 M

Molality = mole /kg of solvent

0.45 = mole /0.0103

Cross multiply

Mole = 0.45 x 0.0103

Mole = 4.635×10¯³ mole

Therefore the mole of the unknown compound that dissolve in solution is 4.635×10¯³ mole

Now, we can obtain the molar mass of the unknown compound as follow:

Mole of the unknown compound = 4.635×10¯³ mole

Mass of unknown compound = 0.98g

Molar mass of the unknown compound =?

Mole = mass /Molar mass

4.635×10¯³ = 0.98 /Molar mass

Cross multiply

4.635×10¯³ x molar mass = 0.98

Divide both side by 4.635×10¯³

Molar mass = 0.98 / 4.635×10¯³

Molar mass = 211.4g/mol.

Therefore, the molar mass of the unknown compound is 211.4g/mol.

The molecular mass of the unknown has been 211.66 g/mol.

Molality can be defined as the moles of the solute per kg of solvent.

Molality can be expressed as:

Molality = [tex]\rm \dfrac{Mass\;of\;solute\;(g)}{molecular\;mass\;of\;solute}\;\times\;\dfrac{1000}{Mass\;of\;solvent\;(g)}[/tex] ......(i)

The given unknown has been the solute.

The mass of solute = 0.98 g.

The mass of solvent = 10.30 g.

The molality of the solution formed has been = 0.45 m.

Substituting the values in equation (i):

0.45 m = [tex]\rm \dfrac{0.98\;g}{molecular\;mass\;of\;solute}\;\times\;\dfrac{1000}{10.30\;g}[/tex]

0.45 m = [tex]\rm \dfrac{0.98\;g}{molecular\;mass\;of\;solute}\;\times\;97.087[/tex]

[tex]\rm \dfrac{0.98\;g}{molecular\;mass\;of\;solute}[/tex]  =  [tex]\rm \dfrac{0.45}{97.087}[/tex]

[tex]\rm \dfrac{0.98\;g}{molecular\;mass\;of\;solute}[/tex]  = 0.00463

Molecular mass of solute = [tex]\rm \dfrac{0.98}{0.00463}[/tex]

Molecular mass of solute = 211.66 g/mol.

The molecular mass of the unknown has been 211.66 g/mol.

For more information about the molality of the solution, refer to the link:

https://brainly.com/question/8103026

Answer:

Vitamin C and B complex is the water soluble.but in question option is A abd C so, among them vitamin C is the water soluble vitamin.

Explanation:

Because it is easily soluble in water and when there is more amount of asorbic acid it has to be mixed in urine and are released out from body.

hope it helps..

Answer:

B. Valence Electron Pairs

Explanation:

Valence-shell electron-pair repulsion, or VSEPR, describes the shape of molecules by determining the repulsion of valence electrons. Therefore, our answer is B.

Answer: The amount of sample left after 8323 years is 4.32g

Explanation:

Expression for rate law for first order kinetics is given by:

[tex]t=\frac{2.303}{k}\log\frac{a}{a-x}[/tex]

where,

k = rate constant

t = age of sample

a = let initial amount of the reactant

a - x = amount left after decay process  

a) for completion of half life:

Half life is the amount of time taken by a radioactive material to decay to half of its original value.

[tex]t_{\frac{1}{2}}=\frac{0.693}{k}[/tex]

[tex]k=\frac{0.693}{8694years}=7.97\times 10^{-5}years^{-1}[/tex]

b) amount left after 8323 years

[tex]t=\frac{2.303}{7.97\times 10^{-5}}\log\frac{8.30g}{a-x}[/tex]

[tex]8323=\frac{2.303}{7.97\times 10^{-5}}\log\frac{8.30g}{a-x}[/tex]

[tex]0.285=\log\frac{8.30}{a-x}[/tex]

[tex]\frac{8.30}{a-x}=1.92[/tex]

[tex](a-x)=4.32g[/tex]

The amount of sample left after 8323 years is 4.32g

Answer:

[tex]\large \boxed{9.780 \times 10^{4}\text{ u}}[/tex]

Explanation:

The molecular mass of a monomer unit is:

C₂H₃Cl = 2×12.01 + 3×1.008 + 35.45 = 24.02 + 3.024 + 35.45 = 62.494 u

For 1565 units,

[tex]\text{Molecular mass} = \text{1565 units} \times \dfrac{\text{62.494 u}}{\text{1 unit }} = \mathbf{9.780 \times 10^{4}}\textbf{ u}\\\\\text{The molecular mass of the chain is $\large \boxed{\mathbf{9.780 \times 10^{4}}\textbf{ u}}$}[/tex]

Answer:

Option E. 2.04 L

Explanation:

Data obtained from the question include:

Molarity of NaCl = 2.25 M

Mole of NaCl = 4.58 moles

Volume =..?

Molarity is simply defined as the mole of solute per unit litre of the solution. It is represented mathematically as:

Molarity = mole /Volume

With the above formula, we can obtain the volume of the solution as follow:

Molarity = mole /Volume

2.25 = 4.58/volume

Cross multiply

2.25 x volume = 4.58

Divide both side by 2.25

Volume = 4.58/2.25

Volume = 2.04 L

Therefore, the volume of the solution is 2.04 L

Answer:

The new mass/volume percent is 2.0% (m/v)

Explanation:

Dilution is a procedure by which the concentration of a solution is decreased, generally with the addition of a diluent. In other words, dilution is a process in which a concentrated solution is always started, to which a greater volume of solvent is added, causing the concentration and volume of the resulting solution to change. But the amount of solute used to prepare the initial solution remains the same.

The calculation of a dilution is made by:

Cinitial. Vinitial = Cfinal. Vfinal

where C indicates concentration and V indicates volume.

In this case:

Replacing:

6.0% (m/v) * 110 mL= Cfinal* 330 mL

Solving:

[tex]Cfinal=\frac{ 6.0 (m/v)*110 mL}{330 mL}[/tex]

Cfinal=   2.0% (m/v)

The new mass/volume percent is 2.0% (m/v)

Answer:

Polarity in chemistry referred to physical properties of compounds related to solubility, melting and boiling properties.

Polarity of black pepper can be seen when black pepper is sprinkled on water. The balck pepper float on water and get displaced if touched.

It means black pepper is non-polar and have no difference in electronegativity between bonded atoms. Black pepper is so light in weight and non-polar, the surface tension of water keep it floating in the water.

Answer:

The correct answer is 17.845 hours.

Explanation:

To solve the question, that is, to determine the hours required there is a need to combine the Faraday's law of electrolysis with the Ideal gas law.  

Based on Faraday's law, m = Mit/nF

Here m is the mass in grams, M is the molecular mass, i is the current in amperes, t is time, n is the number of moles of electron per mole of oxygen formed and F is the Faraday's constant (the value of F is 96487 coulombs/mole).  

From the above mentioned equation,  

t = mnF/Mi ------(i)

Now based on ideal gas law's, PV = nRT or PV = m/M RT, here n = mass/molecular mass.  

So, from the above gas law's equation, m = PVM/RT

Now putting the values of m in the equation (i) we get,  

t = PVMnF/MiRT = PVnF/iRT

Based on the given information, the value of P is 750 torr or 750/760 atm = 0.98 atm, the value of v is 15.0 L, T is 30 degree C or 273 + 30 K = 303 K, i is 3.55 Amperes, and the value of R is 0.0821 atm L/mol K.  

1 mole of oxygen gives 2 moles of electrons, therefore, 2 moles of oxygen will give 4 moles of electrons.  

Now putting the values we get,  

t = PVnF/iRT

= 0.98 atm × 15.0 L × 4 moles of electron × 96487 coulombs per mole / 3.55 coulomb per sec × 0.0821 atm L per mole-K × 303 K

= 64243.81 secs or 64243.81/3600 hr  

= 17.845 hours

Answer:

You can take 1mL of your stock solution in a 100mL volumetric flask and complete to volume.

Explanation:

You need to create a 0.00200M solution of Fe(NO₃)₃. First, you have to obtain the concentration of the first solution you made. That is:

0.8g Fe(NO₃)₃.9H₂O × (1mol / 403.9972g) =

0.0020 moles of Fe(NO₃)₃.9H₂O = Moles of Fe(NO₃)₃

In 10mL = 0.010L:

0.0020 moles of Fe(NO₃)₃ / 0.010L = 0.20M Fe(NO₃)₃

This is the concentration of your stock solution, as you want to obtain a 0.0020M solution, you dilution factor must be:

0.20M / 0.0020M = 100

That means you need to dilute your stock solution 100 times.

You can make this dilution, for example,

Answer:

Mg(s) + 2Ag^+(aq) ---->Mg^2+(aq) + 2Ag(s)

Explanation:

The key to balancing redox reaction equations is this; ensure that the number of electrons lost in the oxidation half reaction equation is equal to the number of electrons gained in the reduction half reaction equation. The both half reaction equations can now be combined to give the overall reaction equation.

For the redox reaction under consideration;

Oxidation half equation;

Mg(s) ------> Mg^2+(aq) + 2e

Reduction half equation;

2Ag^+(aq) +2e ----> 2Ag(s)

Overall balanced redox reaction equation;

Mg(s) + 2Ag^+(aq) ---->Mg^2+(aq) + 2Ag(s)

Answer:

0.48 dm3  (or 480 cm3)

Explanation:

First find the original no. of moles existing in the sulphuric acid:

no. of moles = volume (in dm3) x concentration

                     = 120/1000 x 10

                     = 1.2 mol

Then let the total volume of the diluted acid be v dm3.

Since

Concentration = no. of moles / volume,

so by substituting the given information,

2 = 1.2 / v

v = 0.6 dm3

Hence, the volume of water required

= 0.6 - 120/1000

= 0.48 dm3  (or 480 cm3)

Considering the definition of dilution, 600 cm³ of water is required to dilute 120 cm³ of 10 [tex]\frac{mol}{dm^{3} }[/tex] sulphuric acid to a concentration of 2 [tex]\frac{mol}{dm^{3} }[/tex].

First of all, you have to know that when it is desired to prepare a less concentrated solution from a more concentrated one, it is called dilution.

Dilution is the procedure followed to prepare a less concentrated solution from a more concentrated one and consists of reducing the amount of solute per unit volume of solution. This is accomplished simply by adding more solvent to the solution in the same amount of solute.

In a dilution the amount of solute does not change, but as more solvent is added, the concentration of the solute decreases, as the volume of the solution increases.

A dilution is mathematically expressed as:

Ci×Vi = Cf×Vf

where

In this case, you know:

Replacing in the definition of dilution:

10[tex]\frac{mol}{dm^{3} }[/tex]× 120 cm³= 2 [tex]\frac{mol}{dm^{3} }[/tex]× Vf

Solving:

Vf= (10[tex]\frac{mol}{dm^{3} }[/tex]× 120 cm³) ÷2 [tex]\frac{mol}{dm^{3} }[/tex]

Vf= 600 cm³

In summary, 600 cm³ of water is required to dilute 120 cm³ of 10 [tex]\frac{mol}{dm^{3} }[/tex] sulphuric acid to a concentration of 2 [tex]\frac{mol}{dm^{3} }[/tex].

Learn more about dilution:

Answer:

Equilibrium constant Kc = [x]² / [A - x] [B - x]

Explanation:

The equilibrium constant is defined as the ratio of the concentration of the products to that of the reactants at equilibrium

ie Kc = [products] / [reactants].

The balanced equation of the reaction is given as : A + B ⇄ AB

At the beginning of the reaction,

Initial concentration I = A = 1M

                                       B = 1M

                                      AB = 0M

After a period of time and assuming 'x' to be the concentration of product AB formed, the concentrations become

                                         C = reactant A = [A - x] M

                                                 rectant B =   [B - x] M

                                              Product AB =  [x] [x] M

At equilibrium, the concentrations are,

                                            E  = rectant A = [A - x] M

                                                   reactant B = [B - x] M

                                                   product AB = [x]² M

therefore , the equilibrium constant, Kc  = [products]/[reactants]

                                                                   = [x]² / [A - x] [B - x]

Answer:

1 mole of CaC₂ will produce 26g of C₂H₂ or 64.1g of CaC₂ will produce 26g of C₂H₂

Explanation:

Hello,

To solve this question, we'll require a balanced chemical equation of reaction between calcium carbide and water.

Equation of reaction

CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂

Molar mass of calcium carbide (CaC₂) = 64.1g/mol

Molar mass of water (H₂O) = 18g/mol

Molar mass of calcium hydroxide (Ca(OH)₂) = 74g/mol

Molar mass of ethyne (C₂H₂) = 26g/mol

From the equation of reaction, 1 mole of CaC₂ will produce 1 mole of C₂H₂

1 mole of CaC₂ = mass / molar mass

Mass = 1 × 64.1

Mass = 64.1g

1 mole of C₂H₂ = mass / molar mass

Mass = 1 × 26

Mass = 26g

Therefore, 1 mole of CaC₂ will produce 26g of C₂H₂

Note: this is a hypothetical calculation since we were not given the initial mass of CaC₂ that starts the reaction

Answer:

The correct answer is -  13.33 kJ of heat

Explanation:

To know which one is the limiting reagent, determine the number of moles of each reagent in order .

n(K) = mass/atomic weight = 1.41/39 = 0.036 moles

Density of ICl = Mass/Volume

3.24 = Mass/6.52

Mass of ICl = 21.12 g

n(ICl) = mass/molar mass = 21.12/162.35 = 0.130 moles

2 moles of K reacts with 1 mole of ICl

0.036 moles of K will react with = 0.036/2 = 0.018 moles of ICl

since the amount of moles of ICl is more than 0.018, it is in excess and hence K is the limiting reagent. Now, use the balance equation to determine the amount of heat liberated:

2 moles of K gives out -740.71 kJ of heat

1 mole of K will give out = -740.71/2 = 370.36 kJ of heat

0.036 moles of K will give out = 0.036 × 370.36 = 13.33 kJ of heat

Thus, the correct answer is -  13.33 kJ of heat

The amount of heat liberated at constant pressure is -13.33 kJ

The given parameters are:

Start by calculating the number (n) of moles of each reagent using:

[tex]n = \frac{Mass}{Atomic\ weight }[/tex]

For the potassium metal, we have:

[tex]n_k = \frac{1.41g}{39g/mole}[/tex] ---where 39 is the atomic weight of potassium

[tex]n_k = 0.036\ moles[/tex]

For the liquid iodine monochloride, we start by calculating its mass using:

[tex]Mass = Density \times Volume[/tex]

So, we have:

[tex]Mass = 3.24 \times 6.52[/tex]

[tex]Mass = 21.12g[/tex]

The number of moles is then calculated as:

[tex]n_I=\frac{21.12g}{162.35}[/tex]

[tex]n_I = 0.130\ moles[/tex]

The reaction equation 2K(s) + ICl(l) → KCl(s) + KI(s) means that:

2 moles of potassium reacts with 1 mole of liquid iodine monochloride.

So,  0.036 moles of potassium will react with the following moles of liquid iodine monochloride.

[tex]A = \frac{0.036}{2}[/tex]

[tex]A = 0.018\ moles[/tex]

i.e. 0.036 moles of potassium will react with of liquid iodine monochloride

By comparison: 0.018 moles is less than 0.036 moles

So, the amount of heat liberated at constant pressure is:

[tex]Amount = 0.036 \times -\frac{740.71}{2} kJ[/tex]

[tex]Amount = -13.33 kJ[/tex]

Hence, the amount of heat liberated at constant pressure is -13.33 kJ

Read more about heat at:

https://brainly.com/question/13439286

Answer:

HCl

Explanation:

Choices:

CO: 28.01g/mol

NO₂: 46g/mol

CH₄: 16.04g/mol

HCl: 36.4g/mol

CO₂: 44.01g/mol

It is possible to identify a substance finding its molar mass (That is, the ratio between its mass in grams and its moles). It is possible to find the moles of the gas using general ideal gas law:

PV = nRT

Where P is pressure of gas 0.764atm; V its volume, 0.279L; n moles; R gas constant: 0.082atmL/molK and T its absolute temperature, 295.85K (22.7°C + 273.15).

Replacing:

PV = nRT

PV / RT = n

0.764atm*0.279L / 0.082atmL/molKₓ295.85K = n

8.786x10⁻³ = moles of the gas

As the mass of the gas is 0.320g; its molar mass is:

0.320g / 8.786x10⁻³moles = 36.4 g/mol

Based in the group of answer choices, the identity of the gas is:

Molar mass of substance is the mass of one mole of substance. The gas is identified as HCl as it has 36.4 g/mol of molar mass.

The substance can be identified from its molar mass. The formula to calculate the molar mass is

[tex]\bold {m = \dfrac w{n}}[/tex]

Where,

n - number of moles

w - given mass of the substance  

The number of moles can be calculated by the using  ideal gas law

PV = nRT

[tex]\bold {n = \dfrac {PV }{ RT }}[/tex]  

Where

P - pressure of gas 0.764 atm;

V its volume, 0.279 L;

n moles;

R gas constant: 0.082atmL/molK

T its absolute temperature, 295.85 K (22.7°C + 273.15).  

Put the values in the formula,  

[tex]\bold {n = \dfrac {0.764\ atm \times , 0.279 }{ 0.082 \times 295.85 }}\\\\\bold {n =8.786x10^-^3}[/tex]  

Now, put the values in the molar mass formula,

[tex]\bold {m = \dfrac {0.320g}{ 8.786x10^-^3} = 36.4\ g/mol}[/tex]

Therefore, the gas is identified as HCl as it has 36.4 g/mol of molar mass.

To know more about molar mass,

https://brainly.com/question/12127540

A nonmetal and a nonmetal will make molecular compounds like H2O and CO2

Answer:

B

Explanation:

Heat capacity = mass x specific heat capacity.

(C = mc)

87.2 = 368 x c

= 0.237 J/g.°C

Answer:

THE MOLAR MASS OF THE UNKNOWN COMPOUND IS 242.02 g/mol.

Explanation:

First:

Calculate the change in freezing point:

          Freezing point of pure benzene = 5.5°C

Change in temperature = 5.5 - 3.06 = 2.44 °C

Second:

Using the formula:

Δt = i Kf m

Let's assume i = 1

Kf = 5.12 °C/m

M = x / 0.250 kg of benzene

Then we can calculate x which is the molarity

Re-arranging the formula, we have:

m = Δt / i Kf

x / 0.250 = 2.44 / 1 * 5.12

x = 2.44 * 0.250 / 5.12

x = 0.61 / 5.12

x = 0.119 M

Since it is well known that molarity is the mass of a substance divided by its molar mass. We can then calculate the molar mass.

Molar mass = Mass / molarity

Molar mass = 28.8 g / 0.119 M

Molar mass =242.02 g/mol

Hence, the molar mass of the unknown molecular compound is 242.02 g/mol.

Answer:

14.32g

Explanation:

Initial temperature = 83.8°C

Final temperature = 77.1°C

Temperature change, ΔT = 83.8°C - 77.1°C = 6.7

Heat, H = 167J

Specific heat, c = 1.740J/g °C

m = ?

All these parameters are related with the equation below;

H = mcΔT

m = H / cΔT

m = 167 /  (1.740 * 6.7)

m = 167 / 11.658 = 14.32g

Answer:

118.6nm

Explanation:

It is possible to calculate wavelength of any energetic process (As an ionization) using:

E = hc / λ (1)

Where E is Energy, h is Planck constant (6.626x10⁻³⁴Js), c speed of light (3x10⁸ms⁻¹) and λ is wavelength In meters.

As the energy to ionize 1 mole of iodine is 1009kJ, one atom requires:

(1009kJ / mol) ₓ (1mol / 6.022x10²³ atoms) = 1.6755x10⁻²¹kJ / atom. = 1.6755x10⁻¹⁸J

Replacing in (1):

λ = hc / E

λ = 6.626x10⁻³⁴Js*3x10⁸ms⁻¹ / 1.6755x10⁻¹⁸J

λ = 1.186x10⁻⁷m

As 1m = 1x10⁹nm:

1.186x10⁻⁷m ₓ (1x10⁹nm / 1m) =

Answer:

Light is composed of particles and travels in a straight line.

Explanation:

The general consensus among scientists in Sir Isaac Newton's time in the early 1700s was that light was composed of a steady stream of particles, since it was observed that light traveled in a straight line and was able to pass through a vacuum. They argued along the lines of Sir Isaac Newton that since sound travels in waves and cannot travel though a vacuum, light must consist of something other than waves, such as particles.

Also, on reflection of light from rough surfaces, the particle theory suggests that if the surface is very rough, the particles bounce away at different angles from the surface, scattering the light as is confirmed by experimental observation.

In his 1704 book Opticks, Sir Isaac Newton stated that "Light is never known to follow crooked passages nor to bend into the shadow". This idea lent support to the particle theory, which proposes that light particles must always travel in straight lines. If the particles encounter the edge of a barrier, then they will cast a shadow because the particles not blocked by the barrier continue on in a straight line and cannot spread out behind the edge. This was observed in eclipses as well as formation of shadow of objects.

Answer:

Light is composed of particles and travels in a straight line.

Explanation:

PF The majority of scientists in the early 1700s agreed that light must be particle-like, since it was apparent that light traveled in a straight line and was able to pass through a vacuum. Their logic was that since sound travels in waves and can't travel though a vacuum, light must consist of something other than waves, such as particles.

Answer:

THE SPECIFIC HEAT OF THE METAL IS 0.4843 J/G °C

Explanation:

Heat involved in the reaction is 169.5 J

mass of the metal = 10 g

Change in temperature = 60 °C - 25 °C = 35 °C

Specific heat of the metal = unknown

Specific heat of a metal or substance is the amount of heat per unit mass required to raise the temperature by one degree Celsius.

Using the formula for heat of a reaction, which is:

Heat = mass * specific heat * change in temperature

Heat = m C ΔT

Re-arranging the formula by making C the subject of the formula, we get:

C = Heat / m ΔT

C = 169.5 J / 10 g * 35 C

C = 169.5 J / 350 g °C

C = 0.4843 J/g°C

So therefore, the specific heat of the metal is 0.4843 J/ g°C

Answer:

Option B. 2096.1 K

Explanation:

Data obtained from the question include the following:

Enthalpy (H) = +1287 kJmol¯¹ = +1287000 Jmol¯¹

Entropy (S) = +614 JK¯¹mol¯¹

Temperature (T) =.?

Entropy is related to enthalphy and temperature by the following equation:

Change in entropy (ΔS) = change in enthalphy (ΔH) / Temperature (T)

ΔS = ΔH / T

With the above formula, we can obtain the temperature at which the reaction will be feasible as follow:

ΔS = ΔH / T

614 = 1287000/ T

Cross multiply

614 x T = 1287000

Divide both side by 614

T = 1287000/614

T = 2096.1 K

Therefore, the temperature at which the reaction will be feasible is 2096.1 K