which data entry application control would detect and prevent entry of alphabetic characters as the price of an inventory item?

The data of the local network is 172.20.0.254.

To learn more about  local network refer to:

https://brainly.com/question/8118353

#SPJ4

Below is the solution of the given question in which we are constructing regular expressions that match the given set of strings:

Regular Expression for the given string set:

(a) Binary strings in which every occurrence of the 1 is immediately followed by the 0.

(0 + 10)*

(b) Binary strings where no occurrence of a 00 is immediately followed by the 1

(1 + 01)*(000* + epsilon)

(c) The set of all binary strings with at least one 1 and no more than two 0s.

11* + 011* + 11*01* + 0011* + 11*01*01* + 011*01* + 11*00

(d) The set of all binary strings beginning with a 1 and having a length congruent to 2 mod 4

1(((0+1)(0+1)(0+1)0+1))*(0+1)

To know more about Regular Expressions, visit: https://brainly.com/question/14186204

#SPJ4

At amateur operating frequencies, the FTDX10 is designed for 50 Ohm resistive impedance. Choose the appropriate antenna (dipole antenna, YAGI antenna, cubical quad antenna, etc.) for the operation and bands.

What is Impedance?

Impedance is the sum of resistance and reactance. It was defined as anything that can obstructs the flow of electrons within the electrical circuit. As a result, it influences current generation in the electrical circuit. It could be found in all the possible circuit components and across all possible electrical circuits. Impedance is represented mathematically by the letter Z and has the unit ohm. It's a mix of resistance and reactance.

To learn more about Circuit, visit: https://brainly.com/question/28015204

#SPJ4

Ox00000128 , is the value of the PC AFTER the last instruction executes

What is address and instructions in pc?

The control unit in the CPU uses the address field of an instruction to access memory for the operand. The value entered in the address field can either be the address of the operand or simply a starting point from which to compute the operand's address.

So for the question the first instruction is located at the given address LDR R2.[10] MOV R3 then after R5 SBC R1,R2,R5 then at the last it executes Ox00000128 is the last one which is executed

Hence to conclude the last instruction is Ox00000128 is the last instruction which is done

To know more on address and instructions follow this link:

https://brainly.com/question/29235849

#SPJ4

The best way to explain the difference is ''Jitter is the up and down variation in latency''.

Learn more about latency and jitter refer to :

https://brainly.com/question/13010901

#SPJ1

Stack is an item that has the stack type and stack as its value. top-1 is 2 then the  stack would have three components.

Stack: What is it?

A linear data structure called a stack keeps the operations performed in a specific order. The order could be FILO or LIFO (Last In First Out) (First In Last Out). There are several instances of stacks in everyday life. Take the canteen's plate stacking arrangement as an illustration. The plate that is placed at the bottom of the stack stays there for the greatest amount of time since the plate just at top is the first to be taken out. Therefore, it is clear that it adheres to the LIFO/FILO (Last In, First Out) principle.

To know more about stack
https://brainly.com/question/13707226
#SPJ4

The printer technology that is physical print head wear the biggest concern is option A: Impact.

A printed character is created when an impact printer rubs a plastic or metal letter against paper while using an inked ribbon. Impact printing was widely used in early versions of word processing, desktop printing for individuals, and commercial data processing.

Therefore, in the context of the above, An ink ribbon and paper come into touch directly when an impact printer is operating. The ink ribbon is struck by a metal or plastic head, which causes the ribbon to press against the paper and print the desired character (letter, digit, dot, or line) on the page. Thus it fit into the question above.

Learn more about printer technology from

https://brainly.com/question/21488180
#SPJ1

See full question below

.

On which printer technology is physical print head wear the biggest concern? Choose the best response.

answer choices

Impact

Inkjet

Laser

Thermal

The next step if the concern of no related service information or tsbs open for this symptom is still present is to Isolate what fuse and circuit powers the rear defrost using an electrical schematic

A fuse is a device that protects an electrical system against overcurrent. It has a tiny wire or metal that melts due to high current and opens the circuit, preventing erroneous currents from flowing. Different depiction schemes are provided by the IEC, IEEE, and ANSI. The schematic is a diagram that depicts the logical relationships that exist. A schematic is a graphic that specifies the logical connections between components on a circuit board, whether fixed or flexible. It essentially illustrates how the elements are electronically interconnected. A netlist, which is a basic data structure that lists every connection in the design, is included in a schematic.

Learn more about electrical schematic here:https://brainly.com/question/27319880

#SPJ4

The one way to ensure your design has enough white space is to delete or remove all elements that are seen or found around the object.

The space between design elements is known as white space. Additionally, it refers to the area between typographic glyphs and the space between specific design elements (readable characters). White space does not necessarily have to be white, despite its name. Any color, texture, pattern, or even a backdrop picture could be used.

Therefore, in regards to the task above, to accomplish it, use a straightforward trick: get rid of everything around the object. Existing pieces in a space stand out more because there aren't as many of them there. Due to the lack of other things to observe in that location, the user's focus is drawn to the area where an object is present.

Learn more about design from

https://brainly.com/question/2604531
#SPJ1

Answer:

Preventive

Explanation:

However, Bellman-temporal Ford's complexity is O(VE), which is higher than Dijkstra's. where there are many vertices (V) and many edges (E).

V = n, E = O for a whole network with n vertices (n2). Thus, the entire time complexity is O. (n3). If the edges in your graph have weights, it is considered to be a weighted graph; otherwise, it is said to be an unweighted graph. Each edge has a weight, which is a numerical value. Dijkstra's technique doesn't work for unweighted graphs, as I discovered from the comments. I take it that by "unweighted graphs" you mean those with a fixed weight per edge, like 1. Otherwise, it's ambiguous what the term "shortest path" might signify.

Learn more about network here-

https://brainly.com/question/13992507

#SPJ4

Windows 8's Desktop Mode is a graphical user interface (GUI) environment for quickly gaining access to frequently used programs and services.

In all Windows versions prior to Windows 8, Desktop Mode functions and looks much like a standard desktop, but with a few minor differences.

One of Windows 8's two available GUI interfaces is Desktop Mode. The tiled screen menu is the alternative.  Windows 8 typically launches in the tiled screen user interface (UI), but a user can choose to launch it in desktop mode, which closely mimics the desktop present in earlier

Windows versions. re-use of. re-use re- re- – –. in to –. Additionally, the majority of the features in desktop mode may be accessible using non-touch input devices, like a mouse and keyboard, in contrast to the new Windows 8 app menu.

Therefore, Windows 8's Desktop Mode is a graphical user interface (GUI) environment for quickly gaining access to frequently used programs and services.

To learn more about windows 8, refer to the link:

https://brainly.com/question/13544399

#SPJ1

The information used to explain the graph is known as chart title.  Hence option B is correct.

Statistical graphs are defined as a graphic representation of applied mathematical knowledge. To make it simpler to understand and interpret statistical data, a set of data is represented by statistical graphs.

A table chart is just another type of information presentation. In boxes or columns of the table, there are words, numbers, or a mix of the two. It depicts a group of facts and how they relate to one another.

Thus, the information used to explain the graph is known as statistical graphs.

To learn more about statistical graphs, refer to the link below:

https://brainly.com/question/28790913

#SPJ1

The 4gl languages that enable non-programmers to use certain easily understood commands to search and generate reports from a database are called query.

A computer programming language that is part of a class that is intended to improve upon third-generation programming languages (3GL) is known as a fourth-generation programming language (or 4GL).

Every generation of programming language strives to provide a greater level of abstraction of the internal workings of the computer hardware, making the language more user-friendly, potent, and adaptable.

Despite the fact that the definition of 4GL has evolved over time, it can still be characterized by the fact that it works more with large groups of data at once rather than concentrating on just bits and bytes.

The support for report generation, database management, mathematical optimization, GUI development, and web development may be found in languages that advertise themselves as 4GL. According to some academics, domain-specific languages include 4GLs as a subset.

Learn more about 4GL

https://brainly.com/question/9978575

#SPJ4

Private prototypes can have permissions set up to allow only invited persons access.Enter email addresses to invite users in Adobe XD.

To learn more about adobe xd refer

https://brainly.com/question/28374750

#SPJ1

Since Pille runs a small business. she wants to create and send invoices to her customers. The type of productivity software that Pille use is option D: openOffice Calc.

Applications are known to be used to create information are referred to as productivity software (sometimes known as personal productivity software or office productivity software) (such as that of documents, presentations, worksheets, databases, charts, graphs, digital paintings, electronic music and digital video).

Therefore, in regards to the above question, Spreadsheets are said to be included in the OpenOffice software suite as part of OpenOffice Calc. With roughly identical capabilities, Calc is comparable to Microsoft Excel. Spreadsheets in the Microsoft Excel file format can be opened and saved with the use of Calc and thus will Help Pille.

Learn more about openOffice Calc from

https://brainly.com/question/29309425
#SPJ1

Answer:

All i could find is Blue and green

OAuth. OAuth, which stands for Open Authorization, allows third-party services to exchange information about you without requiring you to provide your password.

To learn more about OAuth refer to:

https://brainly.com/question/17079128

#SPJ4

This change in Damon's behavior is the result of positive reinforcement. Positive reinforcement occurs because of the awareness about the hazardous things that you don't want it to reoccur in your life.

Positive reinforcement can be described as behavior that leads you to positive things. Positive reinforcement means the introduction of a desired or pleasurable stimulus after a behavior. The desired stimulus reinforces the behavior, making it more likely that the behavior will occur again. Positive reinforcement happens because you've experienced things that made you sad and you don't want that to happen in your life again. Positive reinforcement can also be said as a way to prevent bad things from happening.

Learn more about positive reinforcement, here https://brainly.com/question/14838159

#SPJ4

The brute force algorithm would check all possible permutations of the graph G. If G is presented as an adjacency matrix with size n, the number of vertices (m) in the graph is Ω(√n). There are m! possible permutations of the vertices, so the running time is Ω((√n)!) and is therefore super polynomial.

A complete loop around a graph known as a Hamiltonian cycle, also known as a Hamiltonian circuit, Hamilton cycle, or Hamilton circuit, visits each node precisely once (Skiena 1990, p. 196). A graph is referred to as Hamiltonian if it has a Hamiltonian cycle.

There is a Hamiltonian cycle in a dodecahedron, a regular solid with twelve identical pentagonal faces. On a graph, a closed loop known as a Hamiltonian cycle is one that visits each node (vertex) precisely once.

A Hamiltonian path (also known as a traceable path) is a path in an undirected or directed graph that visits each vertex exactly once, according to the mathematical discipline of graph theory. A cycle called a Hamiltonian cycle (or Hamiltonian circuit) makes one exact trip to each vertex.

To learn more about  complete loop   refer to :

https://brainly.com/question/19344465

#SPJ4

Buffer overflow attack

Buffer overflow attack  is a form of software exploitation that transmits or submits a longer stream of data than the input variable is designed to handle.

What is Buffer overflow attack?

Buffer overflow is probably the most well-known type of software security flaw. Although most software developers are aware of the buffer overflow vulnerability, buffer overflow attacks on both legacy and newly developed applications are still common. Part of the problem stems from the numerous ways buffer overflows can occur, and another part stems from the error-prone techniques commonly used to prevent them.

Buffer overflows are difficult to find, and even when they are, they are generally difficult to exploit. Nonetheless, attackers have discovered buffer overflows in a dizzying array of products and components.

To know more about Buffer overflow attack, visit: https://brainly.com/question/15122085

#SPJ4

Based on the code above, The variable strFirst's scope is the passwordMaker

The whole body of the function or method in which the variable numC is being used—in this case, the passwordMaker method—is its local scope. This is due to the fact that the procedure uses the variable numC as a parameter variable.

It can be found in the code next to the usernameMaker, as you can see. Its scope is limited because it is only used at that time. It's also true on Edge, just in case.

Therefore, A variable's scope can be defined as its duration in the program. This indicates that a variable's scope is the block of code throughout the entire program where it is declared, utilized, and modifiable.

Learn more about variable from

https://brainly.com/question/20114161
#SPJ1

32 comparisons are required to find whether the following items are in the list.

When comparing two values, comparison operators are used (or variables). This is useful in programming because it aids us in finding answers and making decisions.

A comparison's return value is either 1 or 0, indicating whether it is true (1) or false (2). (0). These are known as Boolean values, and you can learn more about them in the Booleans and If.. sections. Other chapters.

Comparison operators are used in conditional expressions in computer programming to determine which block of code executes, thereby controlling the program flow. In an expression that resolves to a true or false value, comparison operators compare two values.

Learn more about comparison operators

https://brainly.com/question/11193100

#SPJ4

Answer:

Explanation:

To make it go faster, you could double it, to make it move 20 steps, or if that's too fast, change it to move 15 steps. For the repetition block, repeating 25 times is for 10 steps. For example, if you want it to go the same distance, just faster, you could make it 20 steps, which would be repeat 12.5 times, which is divide by 2.

What is a step in scratch?

A step is equal to a one-pixel length. The Default Valueis 10 and can be replaced by any number. The block actually uses Trigonometryto move in the proper direction, as this is how a computer handles it. The block was known as "forward ()" in Scratch 0.1before being renamed to "move () steps" in Scratch 0.3. Example Uses

Why learn how to code in scratch?

Learning how to code in Scratch is the perfect introduction to computer science, and will make learning other programming languages much more intuitive. This is the perfect article to start your journey into computer science, as movement is one of the easiest things to code in Scratch! What is Movement?

True. A name defined in an outer scope is not available in all blocks nested inside that scope.

To learn more about Nested blocks refer to:

https://brainly.com/question/17102008

#SPJ4

A name defined in an outer scope is available in all nested blocks within that scope.

To learn more  about scope refer to :

https://brainly.com/question/20328027

#SPJ4

A recursive call of the function is what is referred to in programming languages when a programme enables you to call a function inside another function.

Recursion is the act of repeating things in a way that is self-similar. A recursive call of the function is what is referred to in programming languages when a programme enables you to call a function inside another function.

Recursion, or a function that calls itself, is supported in the C programming language. The function will enter an infinite loop if recursion is used, so programmers must be careful to define an exit condition from the function.

#include <bits/stdc++.h>

using namespace std;

bool isPalRec(char str[],

             int s, int e)

{

   if (s == e)

   return true;

   if (str[s] != str[e])

   return false;

   if (s < e + 1)

   return isPalRec(str, s + 1, e - 1);

   return true;

}

bool isPalindrome(char str[])

{

   int n = strlen(str);

   if (n == 0)

       return true;

   return isPalRec(str, 0, n - 1);

}

int main()

{

   char str[] = "geeg";

   if (isPalindrome(str))

   cout << "Yes";

   else

   cout << "No";

   return 0;

}

To learn more about Recursion refer :

https://brainly.com/question/24167967

#SPJ4

The rule of thirds is the most well-known and widely ignored compositional "rule" in photography. It divides the frame into thirds, horizontally and vertically, and claims that placing the subject near one of the resulting intersections is preferable to placing it in the center.

What is the rule of Thirds in photography?

The rule of thirds is notable as more of a guideline because it goes against our natural inclination to make the center of our attention the center of the photograph. In real life, our eyes do not behave this way; when we look at something, we look at it directly. We don't look slightly off-axis to frame the other person to the left or right of center during a conversation.

To know more about Rule of Thirds in photography, visit: https://brainly.com/question/14560790?referrer=searchResults

#SPJ4

A software engineering challenge is application security, in which the system must be built to withstand attacks. Infrastructure security is a systems management issue, and it involves configuring the infrastructure to fend against threats.

Software engineering is defined as a field of engineering that deals with the development of software products using established scientific methods, methodologies, and concepts. To address real-world issues, software engineers design and build computer systems and applications.

Infrastructure security is defined as the process of defending vital infrastructure against both physical and digital threats. Infrastructure security, which includes critical infrastructure security, is essential for avoiding attack or disaster-related damage to technology assets and data.

Thus, a software engineering challenge is application security, in which the system must be built to withstand attacks. Infrastructure security is a systems management issue, and it involves configuring the infrastructure to fend against threats.

To learn more about software engineering, refer to the link below:

https://brainly.com/question/10339061

#SPJ1

Program in C++ that calculates the prime factors of a number. Output image attached.

#include<iostream>

#include<cmath>

using namespace std;

void factors(int n);

void factors(int n) {

int prime_factors;

bool yes_or_no;

cout << n << " = ";

prime_factors = 2;

yes_or_no = true;

do {

 if (n%prime_factors==0) {

  if (yes_or_no) {

   cout << prime_factors;

   yes_or_no = false;

  } else {

   cout << "x" << prime_factors;

  }

  n = int(n/prime_factors);

 } else {

  prime_factors = prime_factors+1;

 }

} while (n>1);

cout << "" << endl;

}

int main() {

float n;

cout << "Entry number: ";

cin >> n;

if (n<=1) {

 cout << "Entry a value greater than 1" << endl;

} else {

 factors(n);

}

return 0;

}

To learn more about factors calculator in C++ see: https://brainly.com/question/883112

#SPJ4

A program with a concurrent pipeline architecture that has three steps:

1) threads that produce 1000 random integers is given below.

A computer program is a series of instructions written in a programming language that can be carried out by a computer. Software is made up of both tangible and intangible components, including computer programs as one example.

Source code is the name given to a computer program that can be read by humans. Because computers can only run their native machine instructions, source code requires the assistance of another computer program to run.

As a result, the compiler of the language can convert source code into machine instructions. (An assembler is used to translate machine language programs.) An executable is the name given to the finished file. As an alternative, source code could run through the language's interpreter.

Code to produce 1000 random integers

#include <stdio.h>

#include <stdlib.h>

#include <time.h>

#include <pthread.h>  

//declare an array to store 1000 random integers

int a[1000];  

//declare an array sum to store sums of each thread

int sum[4];  

//To keep track of nth thread

int part = 0;

//function to calculate 25 array elemnts

void* sum_array(void* arg)

{  

// Each thread computes sum of 1/4th of array  

int thread_part = part++;  

for (int i = thread_part * 25;

i < (thread_part + 1) *25; i++)

 sum[thread_part] += a[i];

}

  int main()

{     int i;     //seeding     srand(time(0));

        //initialize array with 100 elements ranging in (1,1000)

   for(i = 0; i < 1000; i++)

{      

 a[i] = rand()%1000 + 1;

   }      

   //create threads array of size 4

pthread_t threads[4];  

// Creating 4 threads  

for (int i = 0; i < 4; i++)  

pthread_create(&threads[i], NULL, sum_array, (void*)NULL);  

// joining 4 threads i.e. waiting for all 4 threads to complete  

for (int i = 0; i < 4; i++)  

pthread_join(threads[i], NULL);  

// adding sum of all 4 parts  

int total_sum = 0;  

for (int i = 0; i < 4; i++)  

total_sum += sum[i];      

printf("Sum of array eleements is : %d", total_sum);   return 0;

}

Learn more about program

https://brainly.com/question/26134656

#SPJ4