Which best describes the relationship between heat, internal energy, and thermal energy?
Internal energy is heat that flows, and heat is the part of thermal energy that can be transferred.
Internal energy is thermal energy that flows, and thermal energy is the part of heat that can be transferred.
Thermal energy is heat that flows, and heat is the part of internal energy that can be transferred.
Heat is thermal energy that flows, and thermal energy is the part of internal energy that can be transferred.
Mark this and return
Save and Exit
Next
Submit

Answer:

Towards the west.

Explanation:

The direction of a magnetic field lines is the direction north end of a compass needle points. The magnetic field exert force on positive charge.

Using the magnetic rule,which indicate that in order to find the direction of magnetic force on a moving charge, the thumb of the right hand point in the direction of force, the index finger in the direction of velocity charge and the middle finger in the direction of magnetic field.

According to the right hand rule, the electron moving moving west which is the thumb, the direction of the electron is west which is the middle finger and it is upward

Question:

A spaceship enters the solar system moving toward the Sun at a constant speed relative to the Sun. By its own clock, the time elapsed between the time it crosses the orbit of Jupiter and the time it crosses the orbit of Mars is 35.0 minutes

How fast is the spaceship traveling towards the Sun? The radius of the orbit of Jupiter is 43.2 light-minutes, and that of the orbit of Mars is 12.6 light-minutes.

Answer:

S = 5.508 × 10¹¹m

V = 2.62 × 10⁸ m/s

Explanation:

The radius of the orbit of Jupiter, Rj is 43.2 light-minutes

radius of the orbit of Mars, Rm is 12.6 light-minutes

Distance travelled S = (Rj - Rm)

= 43.2 - 12.6 = 30.6 light- minutes

= 30.6 × (3 ×10⁸m/s) × 60 s

= 5.508 × 10¹¹m

time = 35mins = (35 × 60 secs)

= 2100 secs

speed = distance/time

V = 5.508 × 10¹¹m / 2100 s

V = 2.62 × 10⁸ m/s

Answer:

T₂ = 95.56°C

Explanation:

The final resistance of a material after being heated is given by the relation:

R' = R(1 + αΔT)

where,

R' = Final Resistance = 207.4 Ω

R = Initial Resistance = 154.9 Ω

α = Temperature Coefficient of Resistance of Tungsten = 0.0045 °C⁻¹

ΔT = Change in Temperature = ?

Therefore,

207.4 Ω = 154.9 Ω[1 + (0.0045°C⁻¹)ΔT]

207.4 Ω/154.9 Ω = 1 + (0.0045°C⁻¹)ΔT

1.34 - 1 = (0.0045°C⁻¹)ΔT

ΔT = 0.34/0.0045°C⁻¹

ΔT = 75.56°C

but,

ΔT = Final Temperature - Initial Temperature

ΔT = T₂ - T₁ = T₂ - 20°C

T₂ - 20°C = 75.56°C

T₂ = 75.56°C + 20°C

T₂ = 95.56°C

Answer:

C You should deflect the ball back toward your friend.

Explanation:

This is because it would result in a completely inelastic collision, and the final velocity of me would be found using,

with m= mass, V=velocity, i=initial, f=final:

mV(me,i) +mV(ball,i) = [m(me)+m(b)]V(f)

So V(f) would be just the momentum of the ball divided by just MV mass of the ball and it will be higher resulting in inelastic collision

Answer:

A. You should catch the ball.

Explanation:

Catching the ball maximizes your speed by converting most of the momentum of the flying ball into the momentum of you and the ball. Since the ice is smooth, the friction between your feet and the ice is almost negligible, meaning less energy is needed to set your body in motion. Catching the ball means that you and the ball undergoes an inelastic collision, and part of the kinetic energy of the ball is transferred to you, setting you in motion. Deflecting the ball will only give you a relatively small speed compared to catching the ball.

Answer:

The magnitude of the momentum is 49145.19 kg.m/s

The direction of the two vehicles is 44.6° North West

Explanation:

Given;

speed of first vehicle, v₁ = 14 m/s (East to west)

mass of first vehicle, m₁ = 1500 kg

speed of second vehicle, v₂ = 23 m/s (South to North)

momentum of the first vehicle in x-direction (E to W is in negative x-direction)

[tex]P_x = mv_x\\\\P_x = 2500kg(-14 \ m/s)\\\\P_x = -35000 \ kg.m/s[/tex]

momentum of the second vehicle in y-direction (S to N is in positive y-direction)

[tex]P_y = m_2v_y\\\\P_y = 1500kg(23 \ m/s)\\\\P_y = 34500 \ kg.m/s[/tex]

Magnitude of the momentum of the system;

[tex]P= \sqrt{P_x^2 + P_y^2} \\\\P = \sqrt{(-35000)^2+(34500)^2} \\\\P = 49145.19 \ kg.m/s[/tex]

Direction of the two vehicles;

[tex]tan \ \theta = \frac{P_y}{|P_x|} \\\\tan \ \theta = \frac{34500}{35000} \\\\tan \ \theta = 0.9857\\\\\theta = tan^{-1} (0.9857)\\\\\theta = 44.6^0[/tex]North West

Answer:

The force is  [tex]F = 8*10^{-12} \ N[/tex]

Explanation:

From the question we are told that

     The rate at which ATP molecules are used is [tex]R = 80 ATP/ s[/tex]

       The energy provided by a single ATP is  [tex]E_{ATP} = 0.8 * 10^{-19} J[/tex]

       The velocity of the kinesin is  [tex]v = 800 nm/s = 800*10^{-9} m/s[/tex]

The power provided by the ATP in one second is  mathematically represented as

       [tex]P = E_{ATP} * R[/tex]

substituting values

       [tex]P = 80 * 0.8*10^{-19 }[/tex]

       [tex]P = 6.4 *10^{-18}J/s[/tex]

Now  this power is mathematically represented as

       [tex]P = F * v[/tex]

Where  F  is  the force the kinesin is exerting

  Thus  

          [tex]F = \frac{P}{v}[/tex]

substituting values

            [tex]F = \frac{6.4*0^{-18}}{800 *10^{-9}}[/tex]

           [tex]F = 8*10^{-12} \ N[/tex]

The force exerted by the kinesin  is 8  × 10-12 N.

Let us recall that power is defined as the rate of doing work. Hence, power = Energy/Time.

Since;

Energy  =  0.8 × 10-19 J/molecule

Number ATP molecules transported per second = 80 ATP molecules/s

Power =  0.8 × 10-19 J/molecule × 80 ATP molecules/s

Power = 6.4  × 10-18 J

Again, we know that;

Power = Force × Velocity

Velocity of the ATP molecules =  800 nm/s or 8 × 10-7 m/s

Force = Power/velocity

Force =  6.4  × 10-18 J/ 8 × 10-7 m/s

Force = 8  × 10-12 N

Learn more: https://brainly.com/question/11897796

Answer:

Explanation:

Given data

mass of  load m= 425 kg

height/distance h=64 m

acceleration a= 1.8 m/s^2

The work done can be calculated using the expression

work done= force* distance

but force= mass *acceleration

hence work done= 425*1.8*64= 48,960 J

work done= 48.96 kJ

Answer:

0.8 m

Explanation:

Draw a free body diagram.  There are three forces:

Weight force mg pulling down,

Normal force N pushing up,

and friction force Nμ pushing towards the center.

Sum of forces in the y direction:

∑F = ma

N − mg = 0

N = mg

Sum of forces in the centripetal direction:

∑F = ma

Nμ = m v²/r

Substitute and simplify:

mgμ = m v²/r

gμ = v²/r

Write v in terms of ω and solve for r:

gμ = ω²r

r = gμ/ω²

Plug in values:

r = (10 m/s²) (0.5) / (2.5 rad/s)²

r = 0.8 m

The distance (radius) from the axis of rotation which the man can stand without sliding is 0.784 meters.

Given the following data:

To determine how far (radius) from the axis of rotation can the man stand without sliding:

We would apply Newton's Second Law of Motion, to express the centripetal and force of static friction acting on the man.

[tex]\sum F = \frac{mv^2}{r} - uF_n\\\\\frac{mv^2}{r} = uF_n[/tex]....equation 1.

But, Normal force, [tex]F_n = mg[/tex]  

Substituting the normal force into eqn. 1, we have:

[tex]\frac{mv^2}{r} = umg\\\\\frac{v^2}{r} = ug[/tex]....equation 2.

Also, Linear speed, [tex]v = r\omega[/tex]

Substituting Linear speed into eqn. 2, we have:

[tex]\frac{(r\omega )^2}{r} = ug\\\\r\omega ^2 = ug\\\\r = \frac{ug}{\omega ^2}[/tex]

Substituting the given parameters into the formula, we have;

[tex]r = \frac{0.5 \times 9.8}{2.5^2} \\\\r = \frac{4.9}{6.25}[/tex]

Radius, r = 0.784 meters

Read more: https://brainly.com/question/13754413

Answer:

Objects act differently in a gravity field than in an accelerating reference frame.

Explanation:

The main thrust of the theory general relativity as proposed by Albert Einstein boarders on space and time as the two fundamental aspects of spacetime. Spacetime is curved in the presence of gravity, matter, energy, and momentum. The theory of general relativity explains gravity based on the way space can 'curve', that is, it seeks to relate gravitational force to the changing geometry of space-time.

The Einstein general theory of relativity has replaced Newton's ideas proposed in earlier centuries as a means of predicting gravitational interactions. This concept is quite helpful but cannot be fitted into the context of quantum mechanics due to obvious incompatibilities.

Answer:

A - The orbital path of mercury around the sun has changed.

Explanation:

got right on edg.

Answer:

a

  [tex]B = 0.0533 \ T[/tex]

b

  [tex]B = 0.04 \ T[/tex]

Explanation:

From the question we are told that

   The inner radius is [tex]r = 1.2 \ cm = 0.012 \ m[/tex]

   The  outer radius is  [tex]r_o = 2.4 \ cm = \frac{2.4}{100} = 0.024 \ m[/tex]

    The nu umber of turns is  [tex]N = 960[/tex]

    The current it is carrying is  [tex]I = 2. 5 A[/tex]

Generally the magnetic field is mathematically represented as

      [tex]B = \frac{\mu_o * N* I }{2 * \pi * r }[/tex]

Where  [tex]\mu_o[/tex] is the permeability of free space with a constant value    

            [tex]\mu = 4\pi * 10^{-7} N/A^2[/tex]

And the given distance where the magnetic field is felt is  r =  0.9 cm  =  0.009 m

Now  substituting values

     [tex]B = \frac{ 4\pi * 10^{-7} * 960* 2.5 }{2 * 3.142 * 0.009 }[/tex]

    [tex]B = 0.0533 \ T[/tex]

    Fro the second question the distance of the position considered from the center is  r =  1.2 cm  =  0.012 m

So the  magnetic field is  

        [tex]B = \frac{ 4\pi * 10^{-7} * 960* 2.5 }{2 * 3.142 * 0.012 }[/tex]

        [tex]B = 0.04 \ T[/tex]

The magnetic field at a distance of 0.9 cm from the center of the toroid is 0.053 T.

The magnetic field at a distance of 1.2 cm from the center of the toroid is 0.04 T.

The given parameters;

The magnetic field at a distance of 0.9 cm from the center of the toroid is calculated as follows;

[tex]B = \frac{\mu_o NI}{2\pi r} \\\\B = \frac{(4\pi \times 10^{-7})\times (960) \times (2.5)}{2\pi \times 0.009} \\\\B = 0.053 \ T[/tex]

The magnetic field at a distance of 1.2 cm from the center of the toroid is calculated as follows;

[tex]B = \frac{\mu_o NI}{2\pi r} \\\\B = \frac{(4\pi \times 10^{-7})\times (960) \times (2.5)}{2\pi \times 0.012} \\\\B = 0.04 \ T[/tex]

Learn more here:https://brainly.com/question/19564329

Answer:

0.85c

Explanation:

Rest mass of Kaon [tex]M_{0K}[/tex] = 494 MeV/c²

Rest mass of proton [tex]M_{0P}[/tex]  = 938 MeV/c²

The rest energy is gotten by multiplying the rest mass by the square of the speed of light c²

for the kaon, rest energy [tex]E_{0K}[/tex] = 494c² MeV

for the proton, rest energy [tex]E_{0P}[/tex] = 938c² MeV

Recall that the rest energy, and the total energy are related by..

[tex]E[/tex] = γ[tex]E_{0}[/tex]

which can be written in this case as

[tex]E_{K}[/tex] = γ[tex]E_{0K}[/tex] ...... equ 1

where [tex]E[/tex] = total energy of the kaon, and

[tex]E_{0}[/tex] = rest energy of the kaon

γ = relativistic factor = [tex]\frac{1}{\sqrt{1 - \beta ^{2} } }[/tex]

where [tex]\beta = \frac{v}{c}[/tex]

But, it is stated that the total energy of the kaon is equal to the rest mass of the proton or its equivalent rest energy, therefore...

[tex]E_{K}[/tex] = [tex]E_{0P}[/tex] ......equ 2

where [tex]E_{K}[/tex] is the total energy of the kaon, and

[tex]E_{0P}[/tex] is the rest energy of the proton.

From [tex]E_{K}[/tex] = [tex]E_{0P}[/tex] = 938c²    

equ 1 becomes

938c² = γ494c²

γ = 938c²/494c² = 1.89

γ = [tex]\frac{1}{\sqrt{1 - \beta ^{2} } }[/tex] = 1.89

1.89[tex]\sqrt{1 - \beta ^{2} }[/tex] = 1

squaring both sides, we get

3.57( 1 - [tex]\beta^{2}[/tex]) = 1

3.57 - 3.57[tex]\beta^{2}[/tex] = 1

2.57 = 3.57[tex]\beta^{2}[/tex]

[tex]\beta^{2}[/tex] = 2.57/3.57 = 0.72

[tex]\beta = \sqrt{0.72}[/tex] = 0.85

but, [tex]\beta = \frac{v}{c}[/tex]

v/c = 0.85

v = 0.85c

Answer:

  θ₁ = 85.5º       θ₂ = 12.98º

Explanation:

Let's analyze this projectile launch problem, the catapults are 100 m from the wall 15 m high, the objective is for the walls, let's look for the angles for which the rock stops touching the wall.

Let's write the equations for motion for this point

X axis

          x = v₀ₓ t

          x = v₀ cos θ t

Y axis

         y = [tex]v_{oy}[/tex] t - ½ g t2

         y = v_{o} sin θ t - ½ g t²

let's substitute the values

         100 = 80 cos θ t

           15 = 80 sin θ t - ½ 9.8 t²

we have two equations with two unknowns, so the system can be solved

let's clear the time in the first equation

           t = 100/80 cos θ

         15 = 80 sin θ (10/8 cos θ) - 4.9 (10/8 cos θ)²

         15 = 100  tan θ - 7.656 sec² θ

we can use the trigonometric relationship

         sec² θ = 1- tan² θ

we substitute

       15 = 100 tan θ - 7,656 (1- tan² θ)

       15 = 100 tan θ - 7,656 + 7,656 tan² θ

        7,656 tan² θ + 100 tan θ -22,656=0

let's change variables

       tan θ = u

        u² + 13.06 u + 2,959 = 0

let's solve the quadratic equation

       u = [-13.06 ±√(13.06² - 4  2,959)] / 2

       u = [13.06 ± 12.599] / 2

        u₁ = 12.8295

        u₂ = 0.2305

now we can find the angles

         u = tan θ

         θ = tan⁻¹ u

        θ₁ = 85.5º

         θ₂ = 12.98º

Answer:

i

  [tex]v = 142.595 \ m/s[/tex]

ii

  [tex]f = 109.69 \ Hz[/tex]

iii1 )

  [tex]f_2 =219.4 Hz[/tex]

iii2)

   [tex]f_3 =329.1 Hz[/tex]

iii3)

    [tex]f_4 =438.8 Hz[/tex]

Explanation:

From the question we are told that

    The length of the string is  [tex]l = 0.65 \ m[/tex]

     The tension on the string is  [tex]T = 61 \ N[/tex]

     The mass per unit length is  [tex]m = 3.0 \ g/m = 3.0 * \frac{1}{1000} = 3 *10^{-3 } \ kg /m[/tex]

The speed of wave on the string is mathematically represented as

       [tex]v = \sqrt{\frac{T}{m} }[/tex]

substituting values

      [tex]v = \sqrt{\frac{61}{3*10^{-3}} }[/tex]

     [tex]v = 142.595 \ m/s[/tex]

generally the  string's  frequency is mathematically represented as

         [tex]f = \frac{nv}{2l}[/tex]

n = 1  given that the frequency we are to find is the fundamental frequency

So

      substituting values

       [tex]f = \frac{142.595 * 1 }{2 * 0.65}[/tex]

       [tex]f = 109.69 \ Hz[/tex]

The  frequencies at which the string would vibrate include

1       [tex]f_2 = 2 * f[/tex]

Here [tex]f_2[/tex] is  know as the second harmonic and the value is  

      [tex]f_2 = 2 * 109.69[/tex]

      [tex]f_2 =219.4 Hz[/tex]

2

[tex]f_3 = 3 * f[/tex]

Here [tex]f_3[/tex] is  know as the third harmonic and the value is  

      [tex]f_3 = 3 * 109.69[/tex]

     [tex]f_3 =329.1 Hz[/tex]

3

     [tex]f_3 = 4 * f[/tex]

Here [tex]f_4[/tex] is  know as the fourth harmonic and the value is  

      [tex]f_3 = 4 * 109.69[/tex]

     [tex]f_4 =438.8 Hz[/tex]

Answer:

The angular displacement is  [tex]\theta = 28.33 \ rad[/tex]

Explanation:

From the question we are told that

     The speed of the driver is  [tex]v =13 \ m/ s[/tex]

     The acceleration of the driver is  [tex]a = 1.02 \ m/s^2[/tex]

      The time taken is [tex]t = 0.70 \ s[/tex]

      The radius of the tire is  [tex]r = 33 cm = 0.33 \ m[/tex]

The distance covered by the car during this  acceleration can be  calculated using the equation of motion as follows

        [tex]s = v*t +\frac{1}{2} * a * t^2[/tex]

Now substituting values  

       [tex]s = 13 * 0.70 +\frac{1}{2} * 1.02 * (0.700)^2[/tex]

      [tex]s = 9.35 \ m[/tex]

Now the angular displacement of the car with respect to the tire movement can be  represented mathematically as

      [tex]\theta = \frac{s}{r}[/tex]

substituting values

      [tex]\theta = \frac{9.35}{0.33}[/tex]

      [tex]\theta = 28.33 \ rad[/tex]

Answer:

k = 0.5 MN/m

Explanation:

Mass of the railcar, m = 5000 kg

Speed of the rail car, v = 1 m/s

The Kinetic energy(KE) of the railcar is given by the equation:

KE = 0.5 mv²

KE = 0.5 * 5000 * 1²

KE = 2500 J

The spring's compression, x = 0.1 m

The potential energy(PE) stored in the spring is given by the equation:

PE = 0.5kx²

PE = 0.5 * k * 0.1²

PE = 0.005k

According to the principle of energy conservation, Kinetic energy of the railcar equals the potential energy stored in the spring

KE = PE

2500 = 0.005k

k = 2500/0.005

k = 500000 N/m

k = 0.5 MN/m

Answer:

momentum of the coupled cars V =  1.77 m/s

kinetic energy coverted to other forms during the collision ΔK.E = -2.892×10⁴J

Explanation:

given

m₁ =3.05 × 10⁴kg

u₁ =2.90m/s

m₂=6.10× 10⁴kg

u₂=1.20m/s

using law of conservation of momentum

m₁u₁ + m₂u₂ = (m₁ + m₂) V

3.05 × 10⁴ ×2.90 + 6.10× 10⁴× 1.20 = (9.15×10⁴)V

V =  1.617×10⁵/9.15×10⁴

V = 1.77m/s

K.E =1/2mV²

ΔK.E = K.E(final) - K.E(initial)

ΔK.E = ¹/₂ × 9.15×10⁴ ×(1.77)² -  ¹/₂ ×3.05 × 10⁴ × (2.90)² -¹/₂ × 6.10× 10⁴× (1.20)²

ΔK.E = ¹/₂ × (28.67-25.65-8.784) ×10⁴

ΔK.E = -2.892×10⁴J

The final speed is 1.77 m/s

The initial momentum is 8.84 × 10⁴ kgm/s [first car] and 7.3 × 10⁴ kgm/s [coupled car]

2.892×10⁴J of energy is converted.

Since the first boxcar collides and couples with the two coupled boxcars, the collision is inelastic. In an inelastic collision, the momentum of the system is conserved but there is a loss in the total kinetic energy of the system.

Let the mass of the railroad boxcar be m₁ =3.05 × 10⁴kg

The initial speed of the railroad boxcar is u₁ = 2.90m/s

Mass of the two coupled boxcars m₂ = 2 × 3.05 × 10⁴kg = 6.10× 10⁴kg

And the initial speed be u₂ = 1.20m/s

The initial momentum of the first car is:

m₁u₁ = 3.05 × 10⁴ × 2.90 =  8.84 × 10⁴ kgm/s

The initial momentum of the coupled car is:

m₁u₁ = 6.10 × 10⁴ × 1.20 = 7.3 × 10⁴ kgm/s

Let the final speed after all the boxcars are coupled be v

From the law of conservation of momentum, we get:

m₁u₁ + m₂u₂ = (m₁ + m₂)v

3.05 × 10⁴ ×2.90 + 6.10× 10⁴× 1.20 = (9.15×10⁴)Vv

v =  1.617×10⁵/9.15×10⁴

v = 1.77m/s

The difference between initial and final kinetic energies is the amount of energy converted into other forms, which is given as follows:

ΔKE = K.E(final) - K.E(initial)

ΔKE = ¹/₂ × 9.15×10⁴ ×(1.77)² -  ¹/₂ ×3.05 × 10⁴ × (2.90)² -¹/₂ × 6.10× 10⁴× (1.20)²

ΔKE = ¹/₂ × (28.67-25.65-8.784) ×10⁴

ΔKE = -2.892×10⁴J

Learn more about inelastic collision:

https://brainly.com/question/13861542?referrer=searchResults

Answer:

Total heat transfer is positive

Total work transfer is positive

Explanation:

The first law of thermodynamics states that when a system interacts with its surrounding, the amount of energy gained by the system must be equal to the amount of energy lost by the surrounding. In a closed system, exchange of energy with the surrounding can be done through heat and work transfer.

Heat transfer to a system is positive and that transferred from the system is negative.

Also, work done by a system is positive while the work done on the system is negative.

Therefore, from the question, since the heat engine inputs 10kJ of heat, then heat is being transferred to the system. Hence, the sign of the total heat transfer is positive (+ve)

Also, since the heat engine outputs 5kJ of work, it implies that work is being done by the system. Hence the sign of the total work transfer is also positive (+ve).

Answer: In physics a drift velocity is the average velocity attained by charged particles, such as electrons, in a material due to an electric field.

Explanation:

Answer:

18.75 rad/s

Explanation:

Moment of inertia of the disk;

I_d = ½ × m_disk × r²

I_d = ½ × 10 × 4²

I_d = 80 kg.m²

I_package = m_pack × r²

Now,it's at 2m from the centre, thus;

I_package = 5 × 2²

I_package = 20 Kg.m²

From conservation of momentum;

(I_disk + I_package)ω1 = I_disk × ω2

Where ω1 = 15 rad/s and ω2 is the unknown angular velocity of the disk/package system.

Thus;

Plugging in the relevant values, we obtain;

(80 + 20)15 = 80 × ω2

1500 = 80ω2

ω2 = 1500/80

ω2 = 18.75 rad/s

Answer:

magnitude of the resultant of forces is 11.45 N

Explanation:

given data

force F1 = 6N

force F2 = 8N

angle = 240°

solution

we get here resultant force that is express as

F(r) = [tex]\sqrt{F_1^2+F_2^2+2F_1F_2cos\ \theta}[/tex]    ..............1

put here value and we get

F(r) = [tex]\sqrt{6^2+8^2+2\times 6\times 8 \times cos240}[/tex]

F(r) =  11.45 N

so magnitude of the resultant of forces is 11.45 N

Answer:

q/6Eo

Explanation:

See attached file pls

Answer:

radius of the loop =  7.9 mm

number of turns N ≅ 399 turns

Explanation:

length of wire L= 2 m

field strength B = 3 mT = 0.003 T

current I = 12 A

recall that field strength B = μnI

where n is the turn per unit length

vacuum permeability μ  = [tex]4\pi *10^{-7} T-m/A[/tex] = 1.256 x 10^-6 T-m/A

imputing values, we have

0.003 = 1.256 x 10^−6 x n x 12

0.003 = 1.507 x 10^-5 x n

n = 199.07 turns per unit length

for a length of 2 m,

number of loop N = 2 x 199.07 = 398.14 ≅ 399 turns

since  there are approximately 399 turns formed by the 2 m length of wire, it means that each loop is formed by 2/399 = 0.005 m of the wire.

this length is also equal to the circumference of each loop

the circumference of each loop = [tex]2\pi r[/tex]

0.005 = 2 x 3.142 x r

r = 0.005/6.284 = [tex]7.9*10^{-4} m[/tex] = 0.0079 m = 7.9 mm

Answer:

Drop to half of the previous value

Explanation:

Energy stored in capacitor is inversly propotional to the distance between the plates.

If the separation between the capacitor plates is doubled while the capacitor remains connected to the battery, the energy stored in the capacitor drops to half its previous value.

The two parallel plates placed at a distance apart used to store charge when electric supply is on.

The capacitance of a capacitor is  given by

C = ε₀ A/d

where, ε₀ is the permittivity of free space, A = area of cross section of plates and d is the distance between them.

Capacitance is inversely proportional to the distance between them. So, if distance is doubled, the capacitance decreases to half its original value.

Thus, the correct option is 8.

Learn more about parallel plate capacitor.

https://brainly.com/question/12733413

#SPJ2

Answer:

at the top of the 9 story building i think

Explanation:

When the ball starts to move, its kinetic energy increases and potential energy decreases. Thus the ball will experience its maximum potential energy at the top height before falling.

Potential energy of a massive body is the energy formed by virtue of its position and displacement. Potential energy is related to the mass, height and gravity as P = Mgh.

Where, g is gravity m is mass of the body and h is the height from the surface.  Potential energy is directly proportional to mass, gravity and height.

Thus, as the height from the surface increases, the body acquires its maximum potential energy. When the body starts moving its kinetic energy progresses and reaches to zero potential energy.

Therefore, at the sate where the ball is at the  top of the building it have maximum potential energy and then changes to zero.

To find more about potential energy, refer the link below:

https://brainly.com/question/24284560

#SPJ2

Answer:

The change in potential energy is  [tex]\Delta PE = - 3.8*10^{-16} \ J[/tex]

Explanation:

From the question we are told that

     The  magnitude of the uniform electric field  is  [tex]E = 950 \ N/C[/tex]

      The  distance traveled by the electron is  [tex]x = 2.50 \ m[/tex]

Generally the force on this electron is  mathematically represented as

     [tex]F = qE[/tex]

Where F is the force and  q is the charge on the electron which is  a constant value of  [tex]q = 1.60*10^{-19} \ C[/tex]

    Thus  

      [tex]F = 950 * 1.60 **10^{-19}[/tex]

      [tex]F = 1.52 *10^{-16} \ N[/tex]

Generally the work energy theorem can be mathematically represented as

          [tex]W = \Delta KE[/tex]

Where W is the workdone on the electron by the  Electric field and  [tex]\Delta KE[/tex]  is the change in kinetic energy

Also  workdone on the electron can also  be represented as

        [tex]W = F* x *cos( \theta )[/tex]

Where  [tex]\theta = 0 ^o[/tex] considering that the movement of the electron is along the x-axis  

        So

             [tex]\Delta KE = F * x cos (0)[/tex]

substituting values

         [tex]\Delta KE = 1.52 *10^{-16} * 2.50 cos (0)[/tex]

          [tex]\Delta KE = 3.8*10^{-16} J[/tex]

Now From the law of energy conservation

       [tex]\Delta PE = - \Delta KE[/tex]

Where [tex]\Delta PE[/tex] is the change  in  potential energy  

Thus  

        [tex]\Delta PE = - 3.8*10^{-16} \ J[/tex]

Answer:

The minimum angular velocity necessary to assure that the riders will not slide down the wall is 1.58 rad/second.

Explanation:

The riders will experience a centripetal force from the cylinder

[tex]F_{C}[/tex] = mrω^2    .... equ 1

where

m is the mass of the rider

r is the inner radius of the cylinder = 3.4 m

ω is the angular speed of of the rider

For the riders not to slide downwards, this centripetal force is balanced by the friction between the riders and the cylinder. The frictional force is given as

[tex]F_{f}[/tex] = μR       ....equ 2

where

μ = coefficient of friction = 0.87

R is the normal force from the rider = mg

where

m is the rider's mass

g is the acceleration due to gravity = 9.81 m/s

substitute mg for R in equ 2, we'll have

[tex]F_{f}[/tex] = μmg     ....equ 3

Equating centripetal force of equ 1 and frictional force of equ 3, we'll get

mrω^2 = μmg

the mass of the rider cancels out, and we are left with

rω^2 = μg

ω^2 = μg/r

ω = [tex]\sqrt{\frac{ug}{r} }[/tex]

ω = [tex]\sqrt{\frac{0.87*9.81}{3.4} }[/tex]

ω = 1.58 rad/second

The minimum angular velocity necessary so that the riders will not slide down the wall is 1.58 rad/s

The riders will experience a  centripetal force from the cylinder

[tex]F = mrw^2[/tex]

where  m is the mass of the rider

r is the inner radius of the cylinder = 3.4 m

ω is the angular speed of the rider

For the riders not to slide downwards, this centripetal force must be balanced by friction. The frictional force is given as

f = μN

where

μ = coefficient of friction = 0.87

N is the normal force = mg

f = μmg  

Equating centripetal force of and frictional force of we'll get

[tex]mrw^2 = umg[/tex]

[tex]rw^2 = ug[/tex]

[tex]w^2 = ug/r[/tex]

[tex]w= \sqrt{ug/r}[/tex]

[tex]w= \sqrt{0.87*9.8/3.4}[/tex]  

ω = 1.58 rad/s is the minimum angular velocity needed to prevent the rider from sliding.

Learn more:

https://brainly.com/question/24638181

Answer:

no the only things that can travel at the speed of light are waves in the electromagnetic spectrum

Answer:

94.248 g/sec

Explanation:

For solving the total current of the blood passing first we have to solve the cross sectional area which is given below:

[tex]A_1 = \pi R^2\\\\A_1 = \pi (1)^2\\\\A_1 = 3.1416 cm^2[/tex]

And, the velocity of blood pumping is 30 cm^2

Now apply the following formula to solve the total current

[tex]Q = \rho A_1V_1\\\\Q = (1)(3.1416)(30)\\\\[/tex]

Q =  94.248 g/sec

Basically we applied the above formula So, that the total current could come

Answer:

Because closed magnetic field loops have to be formed between both ends of the magnet, a magnet will always have two poles.

Explanation:

Magnetic Monopoles do not exist in nature because a magnetic field always forms a loop that runs from one end of the magnet to the other.

Since this loop of the magnetic field has an origination and termination point which are at the two ends of the magnet (North and South poles).  A magnet will always be bipolar which is in this case, North and South; even at an atomic level.

Answer:

the energy of the photons is greater than the work function of the zinc oxide.

                     h f> = Ф

Explanation:

In this experiment on the photoelectric effect, it is explained by the Einstein relation that considers the light beam formed by discrete energy packages.

                    K_max = h f - Ф

in the exercise phase, they indicate that different wavelengths can inject electrons, so the energy of the photons is greater than the work function of the zinc oxide.

                     h f > = Ф