Answer:
Star formation occurs most rapidly in the spiral arms, where the density of interstellar matter is highest.
The tail of a comet always points Select one: a. in the direction of the comet's motion. b. away from the Sun and becomes longest and brightest at perihelion. c. toward the Sun and disappears at perihelion. d. away from the Sun and disappears at perihelion. e. toward Earth and never varies.
Three of the forces in nature attract particles together, with varying strengths, to build the universe. Which is the only one that energizes the universe by making nuclear fusion possible
Answer:
The photon or quantum of light
Explanation:
1. When shot from the barrel of a pellet gun (50.00 cm long), a 5.000 gram pellet moves
from rest to 400.0 m/s. What force does the gun exert on the pellet?
The force the gun exerts on the pellet at the given acceleration is 80 N.
The given parameters;
mass of the pellet, m = 5 g = 0.005 kglength of the gun, d = 50 cm = 5 mfinal velocity of the pellet, v = 400 m/sThe acceleration of the pellet is calculated as follows;
[tex]v^2 = u^2 + 2as\\\\400^2 = 0 + 2(a) (5)\\\\400^2 = 10a\\\\160000 = 10a\\\\16,000 \ m/s^2 = a[/tex]
The force the gun exerts on the pellet at the given acceleration is calculated as;
[tex]F = ma\\\\F = 0.005 \times 16,000\\\\F = 80 \ N[/tex]
Learn more here:https://brainly.com/question/20357188
during which lunar phase does every solar eclipse occur?
Answer:
It has to be the "New Moon" because that is when the moon is between the sun and the earth.
A lunar eclipse can occur when the earth is between the sun and the moon.
the electromagnetic waves with the highest frequencies are called
Which of the following explains why NASA mandated that space food could NOT crumble or come apart?
Crumbs may cause electronics to malfunction.
There is no way to clean crumbs, so all food must be contained.
Floating crumbs may get into astronauts’ eyes.
Crumbs increase the risk of bacteria development.
Answer:
C.
Floating crumbs may get into astronauts’ eyes.
How do you solve problems involving acceleration
Answer:
Velocity/time =acceleration
Acceleration x time = velocity
Velocity/acceleration=time
- A block of mass 4m can move without friction on a horizontal table. This block is attached to another block of
mass m by a string that passes over a frictionless pulley. If the masses of the string and the pulley are negligible,
what is the magnitude of the acceleration of the descending block?
The magnitude of the acceleration of the descending block is equal to 1.96 m/s².
What is the tension in the string?Tension can be described as a force acting along the length of a rope or a cable, especially a force that comprises by a flexible medium. Tension can be described as an action-reaction pair of forces acting at each end of the length of the medium. Each endpoint carried tension and force from the weight attached.
Given that the block with mass, M₁ = 4m is placed on the horizontal table.
The block with mass, M₂ = m is attached by a string.
The block (M₂) suspended by the string experiences tension (T) in the upward direction and weight in the downward direction.
M₂g - T = M₂a ..............(1)
The block (M₁) placed on the table experienced only one force which is tension (T)
T = M₁ a .....................(2)
From equation (1) and (2):
M₂g - M₁a = M₂a
M₁a + M₂a = M₂g
(M₁ + M₂) a = M₂g
a = M₂g/(M₁ + M₂)
Substitute the value of masses of the blocks:
a = m g /( 4m + m)
a = g/5
a = 1.96 m/s²
Learn more about tension, here:
https://brainly.com/question/13676406
#SPJ1
A box of mass 6.0 kg is accelerated from rest
across a floor at a rate of 6.0 m/s² for 9.0 s.
Find the network done on the box
[tex]\text{Given that },\\\text{Mass, m = 6 kg}\\\\\text{Acceleration, a = 6 } \text{m} \text{s}^{-2}\\\\\text{Time, t=9 sec}\\\\\text{Displacement, }s=ut + \dfrac 12 at^2 = \dfrac 12 at^2 = \dfrac 12 \times 6 \times 9^2 = 243 ~m}\\\\\ \text{Work,} ~W = Fs = mas = 6 \times 6 \times 243 = 8748 ~ J}[/tex]
Hi there!
We know that:
[tex]W = \Delta KE = \frac{1}{2}m(\Delta v)^2[/tex]
We can begin by solving for the final velocity using the equation:
[tex]v_f = v_i + at[/tex]
The box starts from rest, so:
[tex]v_f = at\\\\v_f = 6(9) = 54 m/s[/tex]
Now, we can find the kinetic energy:
[tex]KE = \frac{1}{2}mv^2\\\\KE = \frac{1}{2}(6)(54^2) = 8748 J[/tex]
Thus:
[tex]W = \Delta KE\\\boxed{W = 8748 J}[/tex]
A car accelerates from 20m/s to 30m/s in 10 sec. Find the cars acceleration using v=u+at
Explanation:
we derive the formula of acceleration using the formula so v - u /t so
30-20/10
so the acceleration is 1 m/s square
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
A young woman walks up 55 steps to the top of a water slide. She slides
down, feet first, all the way to the bottom gaining speed as she goes. If each
step of the slide is.10m tall, how fast will she be going at the bottom?
Answer:
potential energy PE = M g h
KE at bottom = 1/2 M V^2
Regardless of the slope of the slide the change in energy is the same
1/2 V^2 = g h
V = (2 g h)^1/2 = (2 * 9.8 m/s^2 * 10 m)^1/2 = 14 m / s
Perhaps the question says that h = 55 * .1 = 5.5 m
Then V = (2 * 9.8 * 5.5) = 10.4 m/s
unlike other kinds or muscle cells, ____muscle cells are able to contract by themselves
A. epithelial
B. Liver
C. Intestinal
D. cardiac
Answer:
cardiac
Explanation:
cardiac muscle can contact themselves
a child has the kinetic energy of 71 j the mass of the child is 27kg show that the velocity of the child at this point is 2.3m/s
Explanation:
kinetic energy of child = 1/2 m v^2
71 j. = 1/2×27kg ×v^2
71×2/27= v^2
142/27 = v^2
5.3. =v^2
v= √5.3
v= 2.3 m/s
Trên một sợi dây đàn hồi dài 1,2 m hai đầu cố định đang có sóng dừng Biết sóng truyền trên dây có tần số 100 Hz và tốc độ 60 m trên giây số nút sóng trên dây là
Answer:english please
Explanation:
Science Questions :)
Answer:
The box will move diagonally down to the right
a car traveled 5,300 km in 1 hour whats the average speed is
Answer:
5300km/h
Explanation:
That's an easy question. You can solve it yourself.
The answer can be found by dividing the Distance traveled by the Time.
Now you can solve all the problem of this rule.
If a piece of glass permits light to pass through, then it is considered ___________. A. Transparent c. Transmitting b. Reflective d. Absorbent Please select the best answer from the choices provided A B C D.
Answer:
not sure, but I thinks it's either Transparent or Reflective
According to the concept of reflection, if a piece of glass permits light to pass through, then it is considered to be reflective.
What is reflection?Reflection of light is defined as a property of light ray that when it strikes a smooth surface it bounces back .Objects can be seen due to this property of light.Reflection is produced by all types of waves namely sound waves, light waves, electromagnetic waves.
Reflection of light is governed by laws of reflection which are also called as Snell's laws. According to laws of reflection, angle of incidence and angle of reflection are equal.The incident ray , reflected ray and normal all lie on the same side of the plane.Light travels in a straight line before, after and during the process of reflection.There are 3 types of reflection which are diffuse reflection,specular reflection and glossy reflection.
Learn more about reflection,here:
https://brainly.com/question/2254222
#SPJ7
Julie blows a bubble. At first, the pressure of the gas in the bubble is 4kPa. The bubble floats into the air and expands. When it gets to the top of a tree the bubble has a pressure of 2kPa and a volume of 3.5m³. Assuming a constant temperature, what was the volume in m³ of the bubble when it was first blown? Give your answer to three significant figures.
Answer:
P V = N R T
P1 V1 = P2 V2 assuming N, R, and T remain constant
V1 = (P2 / P1) V2
V1 = (2 kPa / 4 k Pa) 3.5 m3
V1 = 3.5 m^3 / 2 = 1.75 m^3
Please help me don’t send me a link cause I can’t download it
Answer:
C. 0.2 m/s west
Explanation:
Dont ever open the links that bots send you, it is a virus..Trust me, i speak from experience.......
what is rotational dynamics
Rotational dynamics is the study of forces and motions about an axis of rotation.
Explanation:Formulas such as Kinematic Equations and Newton's laws can be expressed in rotating coordinate frames such as: Newton's 2nd Law Fnet=m x a translates into Torque = I x α Where I is Moment of Inertia (the rotational analogous term to mass)
Answer:
Rotational dynamics is the study of forces and motions about an axis of rotation.
Explanation:
Formulas such as Kinematic Equations and Newton's laws can be expressed in rotating coordinate frames such as:
Newton's 2nd Law Fnet=m x a translates into Torque =I x α Where I is Moment of Inertia (the rotational analogous term to mass)
and α is angular acceleration.
You make a bar graph with the following data. What do you plot on the x-axis?
what is the medium for the sound waves for whales to communicate with each other?
Answer:
SONGS CLICKS AND WHISTLE
Explanation:
a person walks 9 meters to the right and 8 meters to the left what's the distance and displacement
Answer:
walked: 17 meters
displacement: 1
Explanation:
so you add 9+8 and the displacement is 1 b/c when you moved back those 8 meters you were still 1 meter away from where you where originally standing
Potassium chlorate gives Potassium chloride+Oxygen
Find the Balancing Chemical Equation for the above
Answer:
The balanced equation is given as: $ 2KCl{O_3} \to 2KCl + 3{O_2} $.if a car travels 90km/h for 15 minutes it will travel a. bc x 10^d what are the values of a, b, c and d
Hope it helps.
Do comment if you have any query.
Do distance and Gravity have a _____ relationship?
Answer:
proportional...?
Explanation:
not sure if thats correct...
hope this helped tho
try your best!
mark me brianliest :D
What is the force that counteracts the thrust force for flight?
The force which counteracts the thrust force for the flight is known as the drag force, as it opposes the flow.
What is drag force?Drag is a force that opposes an object's relative motion to a fluid environment in the field of fluid dynamics. It may be among two liquid film (or surfaces) or in between a liquid and a flat wall. The drag force is influenced by velocity, as opposed to other resistive forces like dry contact, which are essentially independent of it.
When a flow is moving at low or high speed, the drag force is equal to the speed for low pressure and to the square of the velocity for high-speed flow. Although viscous friction is what ultimately causes drag, turbulent drag is unaffected by viscosity.
A force in physics is an input that has the power to change an object's motion. A mass-containing object's velocity can vary, or accelerate, as a result of a force. Intuitively, a push or a pull can also be used to describe forces.
To know more about drag force:
https://brainly.com/question/12774964
#SPJ5
The drag force, which resists the flow, is the force that balances the propulsion force for flight.
What is Drag force?In the study of fluid dynamics, drag is a force that opposes an object's relative motion to a fluid environment. It could be situated between two liquid surfaces (or films) or between a liquid and a flat wall.
Unlike other resistive forces like dry contact, which are largely independent of velocity, the drag force is affected by it.
For low pressure and high speed flows, respectively, the drag force is equal to the speed for low pressure and the square of the velocity. Although drag is ultimately caused by viscous friction, turbulent.
Thus, The drag force, which resists the flow, is the force that balances the propulsion force for flight.
Learn more about Drag force, refer to the link:
https://brainly.com/question/13258892
#SPJ6
What do these two changes have in common
a slice of banana turning brown
bleaching clothes
Answer:
They get air inside
Explanation:
bananas turn brown when air is inside
1kg red-hot iron is put into 1 L of cool water. Explain in detail what will happen to the temperatures of both objects.
The equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.
According to the principle of conservation of energy, the heat lost by the red-hot iron is equal to heat absorbed by the cold water.
[tex]Q_{I} = Q_{w}\\\\m_IC_I(t_I - T) = m_wC_w (T-t_w)[/tex]
where;
T is the equilibrium temperatureFrom the equation given above, we can conclude that the equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.
Learn more here:https://brainly.com/question/14205142
A large solar farm has 21 700 solar panels and generates 5.0 MW of power.
1.0 MW = 1.0 × 106 W
Calculate the average power each panel produces.
Answer:
answer is
Explanation:
average power each panel produces = 21700/ 5×10^6
4340 ×10^-6
that's mean 4340 micro Watt