Answer:
1. Initial conditions
2. The speed of a character at the moment of contact
3. The hardness of the sidewalk where the mug landed
4. The location where potential energy is zero
5. Aerodynamic properties
Explanation:
100%
The values that may change over time in a model are called initial conditions.
Scientists use models to represent actual conditions. A model is always a representation of real life situations and are very useful for explanatory and predictive purposes.
When scientists make models of dynamic physical events, they will normally choose to have values that may change as time progresses. These values are called initial conditions.
Learn more: https://brainly.com/question/8646601
answer please urgent
Answer:
equal and unlike charges
Explanation:
Answer:
[tex]\huge\boxed{\sf Equal \ and \ unlike \ charges}[/tex]
Explanation:
When two bodies are rubs against each other, Charges of equal magnitude are induced in them. However, they are of equal magnitude but the charges are opposite and unlike.
For Example:
If we rub an iron rod with a cotton cloth, a positive charge will be induced in the iron rod and a negative charge will be induced in the cotton cloth. Note that the charges will be of equal magnitude.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
Let me know if you have any q's regarding this!
~AnonymousHelper1807The diagram shows the four primary steps in the production of work in a four-stroke heat engine.
What is the correct order in which these steps occur?
A. Y, W, X, z
B. X, Z, W. Y
C. W, X, Y, Z
D. Z, X, Y, W
Answer:
D- Z, X, Y, W
Explanation:
Correct on edge
HELP ASAP !!!!!!!!!!!!!!
Answer:
big bang theory
Explanation:
Edwin Hubble is credited for the initial development of the Big Bang theory, an idea which helps to explain the formation of the universe over 15 billion years ago.
Please help! ASAP. I'm going to have a panic attack.
Answer:
dont die bro
Explanation:
What becomes V if we use 2 resistors of 4W in parallel?
A. 2.66 V
B. 6 V
C. 12 V
D. 24 V
Explanation:
The question is incomplete. To get the voltage V across the resistors, we need to total current flowing in the circuit.
Let the current I = 6 A
According to ohms law, V = IRt
V is the total voltage
I is the total current
Rr is the total effective resistance
Since the 2 4ohms resistors are connected in parallel;
1/Rt = 1/4 + 1/4
1/Rt = 2/4
Cross multiply
2Rt = 4
Rt = 4/2
Rt = 2 ohms
Get the voltage V.
V = IRt
V = 6(2)
V = 12V
Hence the required voltage will be 12V
Note that the value of the current used was assumed. The same calculation can be employed for any value of the current
what is Force and Preasure ??
Answer:
Definition: Pressure:- Force per unit area surface is called pressure. P = F/ A Pressure = Force /Area Pressure is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure is the pressure relative to the ambient pressure.
Answer:
A force is a push or pull upon an object resulting from the object's interaction with another object. Whenever there is an interaction between two objects, there is a force upon each of the objects. When the interaction ceases, the two objects no longer experience the force.
Pressure is defined to be the amount of force exerted per area.
Formula of pressure = P = F÷A
Where, P = Pressure,
F = Force applied and,
A = Unit area.
Examples of Pressure is Air pressure.
A wire with a linear mass density of 1.17 g/cm moves at a constant speed on a horizontal surface and the coefficient of kinetic friction between the wire and the surface is 0.250. If the wire carries a current of 1.24 A westward and moves horizontally to the south, determine the magnitude and direction of the smallest magnetic field that can accomplish this.
Answer:
The value is [tex]B = 0.2312 \ T[/tex]
The direction is into the surface
Explanation:
From the question we are told that
The mass density is [tex]\mu =\frac{m}{L} = 1.17 \ g/cm =0.117 kg/m[/tex]
The coefficient of kinetic friction is [tex]\mu_k = 0.250[/tex]
The current the wire carries is [tex]I = 1.24 \ A[/tex]
Generally the magnetic force acting on the wire is mathematically represented as
[tex]F_F = F_B[/tex]
Here [tex]F_F[/tex] is the frictional force which is mathematically represented as
[tex]F_F = \mu_k * m * g[/tex]
While [tex]F_B[/tex] is the magnetic force which is mathematically represented as
[tex]F_B = BILsin(\theta )[/tex]
Here [tex]\theta =90^o[/tex] is the angle between the direction of the force and that of the current
So
[tex]F_B = BIL[/tex]
So
[tex]BIL = \mu_k * m * g[/tex]
=> [tex]B = \mu_k * \frac{m}{L} * [\frac{g}{I} ][/tex]
=> [tex]B = 0.25 * 0.117 * [\frac{9.8}{1.24} ][/tex]
=> [tex]B = 0.2312 \ T[/tex]
Apply the right hand curling rule , the thumb pointing towards that direction of the current we see that the direction of the magnetic field is into the surface as shown on the first uploaded image
A car Excel accelerates from rest to a velocity of 5 m/s in 4 seconds. What is its average acceleration over this period of time
Answer:
1.25
Explanation:
acceleration = velocity÷time
Answer:
Its acceleration is 1.25 meters/second2
Explanation:
The car's average acceleration would be 1.25m/s^2 or 1.25meters/second/second. That looks to be the fourth one you've listed.
A force of 6.00 N acts in the positive direction on a 3.00 kg object, originally traveling at +15.0 m/s, for 10.0 s. (a) What is the object’s change in momentum?
Answer:
60 kg m/s
Explanation:
F= Force = 6 N
m = Mass of object = 3 kg
u = Initial velocity = 15 m/s
t = Time = 10 s
v = Final velocity
[tex]\Delta p[/tex] = Change in momentum
Force is given by
[tex]F=\dfrac{\Delta p}{t}\\\Rightarrow Ft=\Delta p\\\Rightarrow \Delta p=6\times 10\\\Rightarrow \Delta p=60\ \text{Ns}[/tex]
The change in momentum of the object is 60 kg m/s.
A snow age is a period of time when much of the Earth’s land is covered in glaciers.
A: True
B: False
A ____________________ is a thick ice mass that moves slowly over the land surface.
The glacial budget is the balance or lack of balance between accumulation at the head of a glacier and loss, or wastage, at the foot
A: True
B: False
Although chemical weathering occurs in deserts, _____________________ is far more dominant in shaping desert landscapes.
An alluvial fan is a fan-shaped deposits of sediments formed when a stream’s slop[e is abruptly reduced
A: True
B: False
A __________________ is a flat area on the floor of an undrained desert basin that fills and becomes a lake after heavy rain.
Wind erodes land surfaces in two ways. Name them!
WIndblown silt can be build up, forming thick deposits called what ?
Which of the following isn’t a real sand dune?
A: barchan dunes
B: latitudinal dunes
C: transversal dunes
D: parabolic dunes
What is known as the vibration of the earth produced by the rapid release of energy within the lithosphere?
A: blizzard
B: mudflow
C: earthquake
The point within earth where an earthquake starts is called the focus
A: True
B: False
_______________ are fractures in earth where movement has occurred
A(n) ________________________ is an earthquake that occurs sometimes soon after the major earthquake.
Foreshocks can happen days, weeks or even months before the major quake
A: True
B: False
Earthquakes produce 2 main types of seismic waves. Name them!
There are 2 types of body waves. Name them!
17. The Greek word “seismo” means what?
18. A seismogram is an instrument that records seismic waves
A: True
B: False
19. A seismograph is the record made by a moment magnitude
A: True
B: False
20. The ____________________ ______________ and the moment magnitude scale
measure earthquake magnitude.
21. If Los Angeles had a moment magnitude reading of 2.5, the results would be?
A: generally not felt
B: rarely felt
C: destructive in built-up areas
22. If New York City had a moment magnitude reading of 5.5, the results would be?
A: generally not felt
B: potentially perceptible
C: can be damaging shocks
23. If E. St. Louis, Illinois had a moment magnitude reading of 6.4, the results would be?
A: generally not felt
B: rarely felt
C: destructive in built-up areas
24. Earthquake -related hazards include seismic shaking, liquefaction. Landslides,
__________________ and tsunamis
25. Define the term, “liquefaction”!
26. A _______________________ is a wave formed when the ocean floor shifts suddenly during an earthquake.
27. The earth’s interior consists of 3 major layers defined by their chemical composition. Name them!
28. Out of these 3 layers of the earth, which is the highest in volume?
29. Which of the following isn’t a real layer of the earth, based on physical properties?
A: lithosphere
B: middle core
C: inner core
30. The outer core is a solid layer of the earth.
A: True
B: False
Answer:
1.true
2.true
3.true
4.d
17to30.
a
d
a
d
a
d
a
d
a
d
a
d
What magnification would be obtained if an eyepiece with a focal length of 0.38 m was placed on telescope?
Answer:
This question is incomplete
Explanation:
This question is incomplete because the telescope's focal length was not provided. The formula to be used here is
Magnification = telescope's focal length/eyepiece's focal length
The eyepiece's focal length was provided in the question as 0.38 m.
NOTE: Magnification can be described as the power of an instrument (in this case telescope) to enlarge an object. It has no unit and thus the two focal lengths mentioned in the formula above must be in the same unit (preferably meters since one of them is in meters already).
a ball of mass 0.5 kg is at point with initial speed 4 m/s at height 10. what is the total energy
Answer:
The total energy is 53 Joule
Explanation:
Mechanical Energy
The mechanical energy of an object of mass m, speed v, and at a height h is:
[tex]\displaystyle E = m.g.h+\frac{mv^2}{2}[/tex]
The ball has a mass of m=0.5 Kg, a speed v = 4 m/s, and at a height of h=10 m. Thus the total energy is:
[tex]\displaystyle E = 0.5\cdot 9.8\cdot 10+\frac{0.5\cdot 4^2}{2}[/tex]
E = 49 J + 4 J = 53 J
The total energy is 53 Joule
A concave mirror produces a real image 1cm tall of an object 2.5mm tall placed 5cm from the mirror. Find the position of the image and the focal length of the mirror.
Answer:
the focal length is 4cm
Explanation:
use the formula 1+1/m = f
it is obtained from the mirror formula
m is the magnification and is the ratio of the image height to the object height
however they should have the same unit . that means you would have to do a little conversion from cm to mm or vice versa .
describe how you would measure the diameter of a tennis ball
An 80 kg object has a µk = 0.35 and a µs = 0.60. Assuming it is on a flat surface
Answer:
What is the normal force on the object (draw a diagram if needed)
784 N
How much force is required to get the object to start to move from rest (max static friction)?
470.4 N
When the object starts moving, what is the force of kinetic friction?
274.4 N
If the moving object has a tension force of 300N to the right pulling it, what is the net force on the object in the horizontal direction? 784 N
What is the acceleration (with direction) of the object based on your answer for part d? Remember that a = net force/m.
Explanation:
We have that for the Question "" it can be said that the normal force and How much force is required to get the object to start to move from rest is
F_N=784NF_{max}480N
From the question we are told
An 80 kg object has a µk = 0.35 and a µs = 0.60. Assuming it is on a flat surface
What is the normal force on the object (draw a diagram if needed) How much force is required to get the object to start to move from rest?
a)
Generally the equation for the Normal Force is mathematically given as
[tex]F_N=mg\\\\F_N=80*9.8\\\\F_N=784N\\\\[/tex]
b)
[tex]F_{max}=0.60*800\\\\\F_{max}480N\\\\[/tex]
For more information on this visit
https://brainly.com/question/23379286
Complete Question
An 80 kg object has a µk = 0.35 and a µs = 0.60. Assuming it is on a flat surface
What is the normal force on the object (draw a diagram if needed) How much force is required to get the object to start to move from rest?
uses of atmospheric pressure
WHICH OF THE FOLLOWING IS
you need to attach a picture so I can answer it
A spatially challenged goldfish swims along the x-axis only. Its initial position is 7.8 m. After swimming back and forth a while, it finds itself at the position 4.4 m. Calculate the fish’s displacement (including its sign).
Answer:
The fish displacement was -3.4 m
Explanation:
Distance and Displacement
A moving object constantly travels some distance at defined periods of time. The total moved distance is the sum of each individual distance the object traveled. It can be written as:
dtotal=d1+d2+d3+...+dn
This sum is obtained independently of the direction the object moves.
The displacement only takes into consideration the initial and final points of the path defined by the object in its moving. The displacement, unlike distance, is a vectorial magnitude and can be even zero if the object starts and ends the movement at the same point.
The displacement, when the object moves in one axis only is given by:
d = final position - initial position
We know the fist started at 7.8 m from a given reference along the x-axis.
After some undisclosed movements, it ends up at the position 4.4 m. Thus, the displacement is:
d = 4.4 m - 7.8 m = -3.4 m
This means the fish ended up to the left of the position it started from.
The fish displacement was -3.4 m
A horizontal force of 30N is applied to a mass of 10 kg causing it to accelerate. If the coefficient of friction is 0.20 what is the frictional force?
If work is shown that would be great
♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️
The force of friction is equal to the product of the vertical force applied by the surface to the object in the coefficient of friction.
♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️
In this question ,
surface vertical force = Weight of the object
Thus ;
svf = ( mass ) × ( gravity acceleration )
_________________________________
If gravity acceleration is 10 :
svf = 10 × 10 = 100 N
So ;
frictional force = 100 × 0.20
frictional force = 20 N
##############################
If gravity acceleration is 9.8 :
svf = 10 × 9.8 = 98 N
So ;
frictional force = 98 × 0.20
frictional force = 19.6 N
_________________________________
♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️♥️
What happens to the mechanical advantage of a machine if the output force is less than the input force? What must happen to output distance? Give an example of a machine that does this?
Which is the function of a nucleus within a eukaryotic cell?
O A) Transport materials within the cell.
O B) Control what materials move into and out of the cell.
OC) Provide the cell with energy to perform its other functions.
OD) Store genetic information that provides instructions for the cell.
During a race, a runner runs with an average velocity of 4.26 m/s toward city hall. What is the runner’s displacement after 167s?
Answer:
d = 711.42 m
Explanation:
Given that,
The average velocity of a runner, v = 4.26 m/s
Time, t = 167 s
We need to find the runner's displacement.
The average velocity of an object is equal to the displacement per unit time. It can be given by :
[tex]v=\dfrac{d}{t}\\\\d=vt\\\\d=4.26\ m/s\times 167\ s\\\\d=711.42\ m[/tex]
So, the runner's displacement is 711.42 m.
A car travels at a speed of 55 km/hr and slows down to 10 km/hr in 20 seconds. What is the acceleration?
Answer:
a = 0.62 [m/s²]
Explanation:
To solve this problem we must use the following equation of kinematics. But first, we must convert speeds from kilometers per hour to meters per second.
[tex]v_{f} =v_{o} -a*t[/tex]
[tex]55[\frac{km}{hr}]*\frac{1hr}{3600s}*\frac{1000m}{1km} =15.27[\frac{m}{s} ]\\10[\frac{km}{hr} ]*\frac{1hr}{3600s}*\frac{1000m}{1km} = 2.77[\frac{m}{s} ][/tex]
where:
Vf = final velocity = 2,77 [m/s]
Vo = initial velocity = 15.27 [m/s]
t = time = 20 [s]
a = acceleration [m/s²]
Now replacing:
[tex]2.77=15.27-a*(20)\\20*a=12.49\\a = 0.62[m/s^{2}][/tex]
Answer:
It would be 10.00
Explanation:
Hope this helps its different for everyone what was it for u it was D for me
Suppose an empty grocery cart rolls downhill in a parking lot. The cart has a maximum speed of 1.3 m/s when it hits the side of the store and comes to rest 0.30 s later. If an unbalanced force of —65 N stops the cart, what is the mass of the grocery cart?
The cart comes to rest from 1.3 m/s in a matter of 0.30 s, so it undergoes an acceleration a of
a = (0 - 1.3 m/s) / (0.30 s)
a ≈ -4.33 m/s²
This acceleration is applied by a force of -65 N, i.e. a force of 65 N that opposes the cart's motion downhill. So the cart has a mass m such that
-65 N = m (-4.33 m/s²)
m = 15 kg
draw a force body diagram represnting various forces on book
Explanation:
thanks me and dont forget to mark mi as brainlist
3) the maximum angular displacement of a pendulum in simple harmonie motion is theta,max then the
kinetic energy is equal to the potential energy when the angular displacement is given by
Answer:
B is correct
Explanation:
Maximum Kinetic energy= Work done.
Now, Work done=mgh=mg(L−Lcosθ)=mgL(1−cosθ)
Option B is thus correct.
Two identical conducting spheres each have a charge of 2 C. They have a radius of 0.1 m and are separated by 0.5 meters. If you were to increase the radius of these spheres to 0.2 meters, the electrostatic force between them would
Answer:
The electrostatic force will remain the same
Explanation:
From the question we are told that
The charge on the each conducting sphere is [tex]q = 2 \ C[/tex]
The radius each sphere is [tex]r_1 = r_2 = r = 0. 1\ m[/tex]
Generally electrostatic force between the sphere is mathematically represented as
[tex]F = \frac{k * q_1 q_2 }{d^2}[/tex]
Here k is the coulomb constant ,
d is the distance between the two sphere which is measured from one center of the sphere to the other center of the sphere
Now from the question we are told that the radius of the spheres is doubled (i.e from 0.10 m to 0.2 m ) , this will not affect the distance between the sphere because their center are still in the same position
and given there is no change in the distance between the spheres , the electrostatic force will remain the same
what is environment
Answer:
Explanation:
all biotic and abiotic factors around a living organism is its environment
Answer: An environment is the surroundings or conditions in which a person, animal, or plant lives or operates. the natural world, as a whole or in a particular geographical area, especially as affected by human activity. The best synonym for environment would be nature.
Explanation: Environment is a place where different things are such as a swampy or hot environment. They constantly interact with it and adapt themselves to conditions in their environment. In the environment there are different interactions between animals, plants, soil, water, and other living and non-living things. Environment plays an important role in healthy living and the existence of life on planet earth. Earth is a home for different living species and we all are dependent on the environment for food, air, water, and other needs. Therefore, it is important for every individual to save and protect our environment. To divide environments' sorts we can mention 3 kinds of environments Natural, industrial, and social environment. Natural environment: Include water, light, land, air and all organisms that live in nature.
Which best describes what occurs when technology advances
Answer: Technology advancement includes the creation of printhead arrays and multiple carriage systems that cover a larger area of cloth in a single pass of the substrate.
Explanation:
A fish is hung by two spring scales as shown in the diagram. Assume the spring scales are massless. if the bottom scale reads 5N, what will the top scale read?
Question 3 options:
10 N
15 N
5 N
0 N
Answer:
I'm going to guess 15 N
Explanation: