Answer and Explanation:
Photosynthesis reaction involves two reactants, carbon dioxide and water. These two reactants yield two products, namely, oxygen and glucose.
9. Which of the following is needed as a reactant for cellular
respiration?
A. Carbon dioxide
B. Oxygen
C. Water
D. Chlorophyll
oxygen is needed as a reactant for cellular respiration
What is cellular respiration ?
Cellular respiration can be defined as the process which occurs in every cells mainly mitochondria of plants and animals, it involve in the break down of sugars in the presence of oxygen and releases energy in the form of ATP.
The waste product of this process are carbon dioxide and water during exhalation process done by lungs, breathing and cellular respiration are related to each other.
At every step of cellular respiration energy is used in the form of ATP and carry out the normal function. It can aerobic and anaerobic respiration on the basis of use of oxygen.
For more details regarding cellular respiration, visit
brainly.com/question/14251313
#SPJ6
An experiment requires 66.6 g of ethyl alcohol (density = 0.790 g/mL). What is the volume?
Answer:
Volume = 84.30 mLExplanation:
Mass = 66.6 gram
Density = 0.790 g/mL
Volume = Mass ÷ Density
Volume = 66.6 ÷ 0.790
Volume = 84.30 mL
uses of carbon dioxide.
Answer:
hello can you follow me
Explanation:
used in fire extinction, blasting rubber, foaming rubber and plastic
What's the mass in grams of 0.334 moles of sucrose (C12H22O11)?
Answer:
114.23g
Explanation:
Mass = xg
Mole = 0.334 mol
Molar mass of Sucrose
(C = 12, H = 1, O = 16)
C12H22O11
(12×12)+(1×22)+(16×11)
144 + 22 + 176
342g/mol
Mass = No of mole × Molar mass
Mass = 0.334 × 342
Mass = 114.228
Mass ≈ 114.23g
What is the pH of a 0.00200 M HCl solution?
Answer:
pH value of HCL = 2.69897
Explanation:
Given:
Concentration of HCL = 0.002 M
Find:
pH value of HCL
Computation:
pH value of HCL = - log(Concentration of HCL)
pH value of HCL = - log(0.002)
pH value of HCL = 2.69897
When a substance is a solid it has
A. Potential energy
B. Kinetic energy
C. Gravitational energy
D. Chemical energy
Answer:
potential energy
Explanation:
Which action is not an example of work?
A. pushing a box across the floor
B. picking up a box off the floor
C. holding a tray in the Cafeteria line
D. raising a barbell over your head
C. picking a tray in the cafeteria line
Pick the answer that correctly spells a layer of the atmosphere.
A. Mesosphere
B. Thermsphere
C. Mezosphere
D. Tropshere
E. Thermoshere
The correct answer is option A; Mesosphere
The mesosphere is defined as the part atmosphere found above the stratosphere but below the thermosphere.
In this layer of the atmosphere, temperature decreases with height. It covers about 50 to 85 km above the earth.
Mesosphere is the only layer of the atmosphere that was correctly spelt among the options.
Learn more: https://brainly.com/question/12117482
sound travels 1,500 m/s through water at 25 degrees celciesunder these conditions how long would it take to travel 300m
Answer:
[tex]v = s \div t[/tex]
[tex]t = s \div v[/tex]
[tex]t = 300 \div 1500 = 0.2s[/tex]
In a Sodium ion 11Na +1
atomic number =11
mass number =23 ,
the number of electrons =
Answer:
11 electrons
Explanation:
The number of electrons is the same as the number of protona in a ATOM.
They will most likely be different in a ion, simple bond or a convalent bond.
What is the meaning of ground state energy?
hope it helps you ❣❣
Mark me as brainliest
You add 0.300 moles of an acid to enough water to get a total of 0.500 liters of solution. Your molar concentration is?
Suppose you are titrating an acid solution with a base solution of known concentration. To calculate the concentration of the acid solution, use three steps.
1. Use the____of base____the endpoint and the known concentration of the base solution to find the_____of base used.
2. Use the_____to find the moles of acid from the moles of base.
3. Divide the moles of acid by the volume of_____the titration to find the concentration of acid.
Answer:
To calculate the concentration of the acid solution, use three steps.
1. Use the volume of base used at the endpoint and the known concentration of the base solution to find the moles of base used.
2. Use the stoichiometry to find the moles of acid from the moles of base.
3. Divide the moles of acid by the volume of acid used in the titration to find the concentration of acid.
Explanation:
Titration is the process used in volumetric analysis to determine the amount of a substance present in a given sample.
In any titration, a solution of known concentration known as the standard solution is used to react with a solution of of unknown concentration. The reacting volumes of the solutions are then used to calculate the unknown concentration of the second solution.
In acid-base neutralization reactions, an equivalence point/endpoint of the neutralization titration is obtained and is the point at which the moles of H+ is equal to the moles of OH- . An indicator is used to indicate the equivalence point during a titration by a color change observed in the indicator.
In order to calculate the concentration of an acid, we need to know accurately, use three steps:
1. Use the volume of base used at the endpoint and the known concentration of the base solution to find the moles of base used.
2. Use the stoichiometry of the reaction to find the moles of acid from the moles of base.
3. Divide the moles of acid by the volume of acid used in the titration to find the concentration of acid.
In order to calculate the concentration of a base, use three steps:
1. Use the volume of acid used at the endpoint and the known concentration of the acid solution to find the moles of acids used.
2. Use the stoichiometry of the reaction to find the moles of base from the moles of acid.
3. Divide the moles of base by the volume of base used in the titration to find the concentration of base.
A balloon has a volume of 105 Lif the temperature is 20 °C. If the temperature is -55°C,
what will be the volume of the volume?
Answer:
78.12 L
Explanation:
Given that,
Initial volume, V₁ = 105 L
Initial temperature, T₁ = 20°C = 20+273 = 293 K
New temperature, T₂ = -55 °C = 218 K
We need to find the new volume of the balloon. The relation between the volume and the temperature is given by :
[tex]\dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
Where
V₂ is the new volume
[tex]V_2=\dfrac{V_1T_2}{T_1}\\\\V_2=\dfrac{105\times 218}{293}\\\\V_2=78.12\ L[/tex]
So, the new volume is 78.12 L.
g the following statements as they apply to gas chromatography. Decide if each is true or false. The technique referred to as gas chromatography is actually gas-liquid chromatography since the stationary phase is a liquid adsorbed on the surface of an inert solid. To be separated using GC, analytes must be volatile. An air peak is commonly used to determine the dead time when using a TCD detector. An FID is insensitive to non-combustible gases such as water and carbon dioxide. A column temperature equal to or slightly above the average boiling point of the sample components results in a reasonable elution time.
Answer: To be separated using GC, analytes must be volatile.
An air peak is commonly used to determine the dead time when using a TCD detector.
An FID is insensitive to non-combustible gases such as water and carbon dioxide.
A column temperature equal to or slightly above the average boiling point of the sample components results in a reasonable elution time.
Explanation:
The gas chromatography works on the principle of separation of gaseous substances based on the differences of vapor pressure. The thermal conductivity detector works on the principle of detection of effluents from the has chamber and the air peak gives indication of the retention time of the effluents. Flame ionization detector can be used for the detection of organic compounds but insensitive for the detection of halogens, non-combustible substances like carbon dioxide and water. The temperature of the column is kept higher than the average boiling point of the substance so as to attain separation of substances by the differences in the elution time.
4. If you had.35 grams of chloric acid, how many molecules would you have?
Answer:
.4 moles
Explanation:
this is if it's 35 grams
aluminium containers are used to store and transport nitric acid(HNO3) but not NAOH why?
Answer:
(i) Concentrated HNO3 can be stored and transported in aluminium containers as it reacts with aluminium to form a thin protective oxide layer on the aluminium surface. This oxide layer renders aluminium passive. (ii) Sodium hydroxide and aluminium react to form sodium tetrahydroxoaluminate(III) and hydrogen gas.
HELP ASAP! ILL GIVE U BRAINIST ANSWER AND A TY! Need help.
Explain what you discovered from the Simulation about why food coloring spreads faster in warmer water.
Answer:
the water molecules have more energy and are moving faster than the molecules of cold water. This makes it easier for the dye to get mixed throughout the hot water.
Explanation:
Answer:
Because particles moves more by kinetic energy and diffusion will spread with the particles
Explanation:
16. When a person looks up into the sky and
sees a full moon, what fraction of the
bright surface of the moon do we see?
Answer:we see 1 side because the other side is not visible
Explanation:
give an example of biotic living conditions.
Answer:
plants and animals
Explanation:
Answer:
water, light, wind, soil, humidity, minerals, gases
Explanation:
i just know
What are the two most abundant chemicals in air?
Answer:
The most abundant chemical/gas is Nitrogen, which makes up about 78% and Oxygen at second place with approximately 21%
Answer:
Nitrogen and Oxygen because about 70% of air is nitrogen and around 20% of air is Oxygen.
Hope this helps!
How many MOLECULES are in 5.0 grams of sodium chloride? (Use "molecules" as your unit...Enter as 9.9 x 10^99 molecules)
Answer:
[tex]\boxed {\boxed {\sf 5.2 *10^{22} \ molecules \ NaCl}}[/tex]
Explanation:
1. Convert grams to moles
First, convert grams to moles using the molar mass. This can be found on the Periodic Table.
Na: 22.9897693 g/molCl: 35.45 g/molSodium (Na) has an oxidation state of +1 and chlorine (Cl) has an oxidation state of -1, so they combine in a 1:1 ratio for a formula of NaCl. We can simply add their moles masses.
NaCl: 22.9897693 g/mol + 35.45 g/mol = 58.4397693 g/molUse this as a ratio.
[tex]\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]
Multiply by the given number of grams.
[tex]5.0 \ g \ NaCl *\frac {58.4397693 \ g \ NaCl}{ 1 \ mol \ NaCl}[/tex]
Flip the fraction so the grams of sodium chloride cancel.
[tex]5.0 \ g \ NaCl *\frac {1 \ mol \ NaCl}{ 58.4397693 \ g \ NaCl}[/tex]
[tex]5.0 *\frac {1 \ mol \ NaCl}{ 58.4397693 }=\frac {5.0 \ mol \ NaCl} { 58.4397693 } = 0.0855581749 \ mol \ NaCl[/tex]
2. Convert moles to molecules
We must use Avogadro's Number. This tells us the amount of particles (molecules, atoms, etc.) in 1 mole of a substance. In this case, it is molecules of sodium chloride.
[tex]\frac{6.022*10^{23} \ molecules \ NaCl} {1 \ mol \ NaCl}[/tex]
Multiply by the number of moles we calculated.
[tex]0.0855581749 \ mol \ NaCl*\frac{6.022*10^{23} \ molecules \ NaCl} {1 \ mol \ NaCl}[/tex]
The moles of sodium chloride cancel.
[tex]0.0855581749 *\frac{6.022*10^{23} \ molecules \ NaCl}{1}=5.15231329*10^{22} \ molecules \ NaCl[/tex]
The original measurement of grams has 2 (2 and 0) significant figures, so our answer must have the same. For the number we calculated, that is the hundredth place. The 5 in the hundredth place tells us to round the 1 to a 2.
[tex]5.2 *10^{22} \ molecules \ NaCl[/tex]
What process is represented by the letter on the diagram?
A: ____________________________________________
B: ____________________________________________
C: ____________________________________________
D: ____________________________________________
E: ____________________________________________
Explanation:
I don't really understand the question
AmbienTM is a sedative used in the treatment of insomnia. It was discovered in 1982 and brought to market in 1992 (it takes a long time for new drugs to undergo the extensive testing required to receive approval from the Food and Drug Administration). Identify the hybridization state and geometry of each carbon atom in the structure of this compound:
Answer:
sp3 - 1,2,13,16,18,19
sp2- 3,4,5,6,7,8,9,10,11,12,14,15,17
sp- 0
Explanation:
Hybridization is the idea that atomic orbitals fuse to form newly hybridized orbitals, which in turn, influences molecular geometry and bonding properties (Chemlibretexts).
Carbon atoms that are singly bonded are sp3 hybridized, carbon atoms that are doubly bonded are sp2 hybridized while carbon atoms that are triply bonded are sp hybridized.
Sp3 hybridized atoms have a tetrahedral geometry, sp2 hybridized atoms have a trigonal planar geometry while an sp hybridized atom has a linear geometry.
The hybridization state of each atom in the compound has been shown in the answer section.
Take your time please.
Answer:
1.) Eyewash station --> D
2.) Absorbent material --> G
3.) Fire extinguisher --> F
4.) Safety Shower --> E
5.) Biohazard container --> J
6.) Broken glass container --> I
7.) Safety goggles --> C
8.) Lab apron --> H
9.) asbestos gloves --> A
10.) Latex gloves --> B
Explanation:
In an equipped laboratory, alot of safety equipments are made available and kept in area that it could be easily accessed in the laboratory. Safety or protective equipments are those materials that helps protect a laboratory personnel while at work on the lab.
These equipments include:
--> Eyewash station: This is an equipment used in the laboratory during emergency to rinse chemical from the eye. Therefore option D is correct.
--> Absorbent material: They are used to contain small spills in the laboratory. Therefore option G is correct.
--> Fire extinguisher: This equipment is used to put out small fires. Therefore F is correct.
--> Safety Shower: This is used to rinse away chemical from clothes and on skin during emergency. Therefore option E is correct.
--> Biohazard container: This container is used to safely dispose bacteria culture, blood and other living tissues. Therefore option J is correct.
--> Broken glass container: This is used to dispose cracked, chipped or broken bottle in the laboratory. Therefore option I is correct.
--> Safety goggles: This helps to protect the eye from chemical and broken glasses. Therefore option C is correct.
--> Lab apron: This is worn by the laboratory personnel to help protect the skin from chemical and biohazards. Therefore option H is correct.
--> Asbestos gloves: these are heat resistant gloves used to protect the hands from heat. Therefore option A is correct.
--> Latex gloves: these are equally worn by the laboratory personnel to protect the hands from chemicals and biohazards
[tex]Answer :—✔[/tex]
THE OTHER PERSON GAVE THE CORRECT ANSWERthe eye is connected to the brain by nerves.
A. True
B. False
the answer is A..which is true
metal and one atom of a group
The following Lewis representation depicts a reaction between one atom of a group
nonmetal
eg
X.
+
x*
+
In this representation, each
atom loses
electron(s) and each
atom gains
electron(s)
Teg
The bonds that form in the product would be
Explanation:
X = Group 1 metal
Y = Group 7 Non metal
The dots basically signifies the group.
Metal loses electrons and non metal gains electron. The valency of X is 1 and that of Y is 7.
X atom loses one electron and Y atom gains one electron.
The bond that forms between a metal and a non metal is an ionic bond.
Do Newton's Laws still apply in space?
Answer:
Yes, they work in space. I forgot an example, will edit the post when I found it
Hope this helps!
supposing on a hypothetical garden 43 identical trees contains a total of 19565 leaves. if each branch on a given tree consist of 35 leaves how many branches does each tree have?
Answer:
13 branches/tree
Explanation:
Step 1: Given data
Total number of trees (t): 43 treesTotal number of leaves (l): 19565 leavesNumber of leaves per branch (l/b): 35 leaves/branchStep 2: Calculate the total number of branches (b)
We will use the following expression.
b = l × b/l
b = 19565 leaves × 1 branch/35 leaves = 559 branch
Step 3: Calculate the number of branches per tree (b/t)
We will divide the total number of branches by the total number of trees.
559 branches/43 trees = 13 branches/tree