Answer:
Thietbi od
Explanation:
A neutral atom has a ground state electron configuration of 1s22s22p63s2.The neutral atom becomes an ion during a chemical reaction.Which is the most likely charge of the ion
Answer:
+2
Explanation:
the atom will acquire the noble gas configuration if it loses 2 electrons, becoming a divalent cation
Why is water often used as the main ingredient in cosmetics?
Answer:
Water forms the basis of almost every type of cosmetic product, including creams, lotions, makeup, deodorants, shampoos and conditioners. Water plays an important part in the process, often acting as a solvent to dissolve other ingredients and forming emulsions for consistency.
Explanation:
Water forms the basis of almost every type of cosmetic product, including creams, lotions, makeup, deodorants, shampoos and conditioners. Water plays an important part in the process, often acting as a solvent to dissolve other ingredients and forming emulsions for consistency.
Which characteristic most likely identifies an object with a small volume and a large mass?
A.
high temperature
B.
low pressure
C.
low viscosity
D.
high density
Answer:
high density is the ans because density is the mass per unit volume.if mass increases density also increases.
Answer:
High temperature is an object with a small volume and a large mass.
Answer is no A
The earth’s _____ creates a cross-current motion that captures the north and south moving air creating a ___ _____?
ANSWER AND YOU WILL BE MARKED BRAINLIEST (NO FILES) :))
Answer:
deflection,Coriolis effect
hope this helps
What is the electron configuration of the sodium atom after it loses an electron?
Multiple choice question.
A)
1s22s22p6
B)
[He]2s22p5
C)
1s22s22p63s1
D)
1s22s22p63s1
Answer:
the answer is A 1s22s22p6
What are the two products of every neutralization reaction?
Group of answer choices
Salt and Water
Acid and Base
Acid and Hydrogen Gas
Acid and Hydroxide
Answer:
Explanation:
c
Helpp!! Please it’s balancing equations and I really need help in it it’s so hard theirs two other parts if you can help with those too:))
The power of the crane was 68600 W
Caculate the time taken for the crane to do 3430000 J of work
Give the unit
Answer:
t = 50 s
Explanation:
P = W/t
Solving for t,
t = W/P = (3430000 J)/(68600 Watts)
= 50 s
Note: 1 Watt = 1 J/s
According to the question, the time that is taken by the crane which has the power of 68600 W to 3430000 J of work is 50 seconds.
What is Power?Power may be defined as the amount of energy that is significantly transmitted or converted per unit of time. In a more simple sense, it is also characterized as the measure of the rate of doing work.
According to the question,
The power of the crane = 68600 W.
The amount of work that the crane has to do = 3430000 J.
Time may be calculated with the help of the following formula:
Power = Work/time.Time = Work/power = 3430000 J/68600 W = 50 seconds. (where 1 W = 1 J/sec).Therefore, according to the question, the time that is taken by the crane which has the power of 68600 W to 3430000 J of work is 50 seconds.
To learn more about Power, refer to the link:
https://brainly.com/question/1634438
#SPJ2
que es la nanotecnologia ?
porfis lo nesecito urgente para antes de las 10
Answer:
Se aclama la nanotecnología por tener el potencial de aumentar la eficiencia del consumo de energía, ayudar a limpiar el medio ambiente y resolver los principales problemas de salud. Se dice que puede aumentar masivamente la producción de fabricación a costos significativamente reducidos.
espero que esto ayude
please help me I have no idea what this is
how many moles are 2.54 x 10^29 molecues of H2O
Answer:
[tex]\boxed {\boxed {\sf 421,786.7818 \ mol \ H_2O}}[/tex]
Explanation:
We are asked to convert from molecules of water to moles.
1. Avogadro's Number1 mole of any substance contains the same number of particles (atoms, molecules, formula units, etc). This is Avogadro's Number: 6.022*10²³. In this problem, the particles are molecules of water.
2. Convert Molecules to MolesUse Avogadro's Number to make a ratio.
[tex]\frac {6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2O}[/tex]
Multiply by the number of molecules given: 2.54 *10²⁹
[tex]2.54 *10^{29} \ molecules \ H_2O \times \frac {6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2O}[/tex]
Flip the ratio so the units of molecules of water cancel.
[tex]2.54 *10^{29} \ molecules \ H_2O \times \frac {1 \ mol \ H_2O}{6.022 *10^{23} \ molecules \ H_2O}[/tex]
[tex]2.54 *10^{29} \times \frac {1 \ mol \ H_2O}{6.022 *10^{23} }[/tex]
Condense the problem into 1 fraction.
[tex]\frac {2.54 *10^{29} }{6.022 *10^{23} }\ mol \ H_2O[/tex]
[tex]421786.7818 \ mol \ H_2O[/tex]
2.54 *10²⁹ molecules of water are 421, 786.7818 moles of water.
When pumping air into a tire, you have to pull back on the pump plunger to fill the pump with air. This increases the volume of the air inside the pump. This increase in volume has what effect on the gases inside the pump?
Question 9 options:
the gas molecules inside the pump are able to spread out more which decreases the pressure of the gas.
the gas molecules inside the pump get compressed and packed closer together which decreases the pressure of the gas.
the gas molecules inside the pump are able to spread out more which increases the pressure of the gas.
the gas molecules inside the pump get compressed and packed closer together which increases the pressure of the gas.
Answer:
Pulling back on the plunger allows you to put in more air into the pump and the more air you have inside a fixed volume, the greater the pressure becomes. (D)
which statement best describes the difference between weather and climate
a) climate is about the hydrospace, weather is about autosphere
b) climate describes average temperature, weather describes many more factores
c) Climate is long periods of time, weather is short periods of time ( present day)
d) Climate describes conditions at sea level, weather describes conditions at different elevations
WILL MARK BRIANLIEST
Answer:
C
Explanation:
Brainliest
I tried my best
I have 3 questions that I will need help from you. 1. The weight of a millimeter of (NH4)2 HPO4 is? 2. How many moles of alanine, C3H7NO2 are there in 159g of alanine? And 3. Nitric acid is a very important industrial chemical. 1.612 * 10^10 pounds of it were produced in 1992. If the density of nitric acid is 12.53 pounds/gallon. What volume would be occupied by this quantity. (1 gallon =3.7854liters)
Answer:
1. m(NH₄)₂HPO₄ = 1.62 g
2. molesC₃H₇NO₂ = 1.79 moles
3. V = 4.87x10⁹ L
Explanation:
These questions are pretty easy to solve, using the correct expressions and formula.
1. To do this, we just need the density of the (NH₄)₂HPO₄. In this case, the reported density is 1.62 g/mL, therefore:
d = m/V (1)
Where:
d: density (g(mL)
m: mass of the compound (g)
V: volume of the compound (mL)
As we already have the volume, we can solve for m:
m = d * V (2)
m = 1.62 * 1
m(NH₄)₂HPO₄ = 1.62 g2. To do this, we need the atomic weights of each element that composes the alanine.
C: 12 g/mol; H: 1 g/mol; N: 14 g/mol; O: 16 g/mol
With these atomic weight, let's determine the molar mass of alanine:
MM C₃H₇NO₂ = 3(12) + 7(1) + 14 + 2(16) = 89 g/mol
Now to get the moles, we use the following expression:
moles = m/MM (3)
moles = 159 / 89
molesC₃H₇NO₂ = 1.79 moles3. We have the mass and density of the nitric acid, we just solve for Volume from expression (1) of part 1:
V = m/d (3)
V = 1.612x10¹⁰ pounds / 12.53 pounds/gallons
V = 1.287x10⁹ gallons
Converting this to liters:
V = 1.287x10⁹ * 3.7854
V = 4.87x10⁹ LHope this helps
two ways the rate of a reaction be monitored
Answer: If a reaction produces a gas such as oxygen or carbon dioxide, there are two ways to measure the reaction rate: using a gas syringe to measure the gas produced, or calculating the reduction in the mass of the reaction solution.
Explanation:
https://courses.lumenlearning.com/introchem/chapter/measuring-reaction-rates/#:~:text=If%20a%20reaction%20produces%20a,mass%20of%20the%20reaction%20solution.
This is the site I got it from. I hope this helps.
What is the molality of an acetic acid solution that contains 0.500 mol of HC2H3O2 (molar mass: 60g/mol) in 0.800 kg of water?
Answer: The molality of given acetic acid solution is 0.625 m.
Explanation:
Given: Moles of solute = 0.5 mol
Mass of solvent = 0.8 kg
Molality is the number of moles of solute present in a kg of solvent.
Therefore, molality of the given solution is calculated as follows.
[tex]Molality = \frac{moles}{mass of solvent}[/tex]
Substitute the values into above formula as follows.
[tex]Molality = \frac{moles}{mass of solvent}\\= \frac{0.5 mol}{0.8 kg}\\= 0.625 m[/tex]
Thus, we can conclude that the molality of given acetic acid solution is 0.625 m.
how does Arizona's climate relate to the air and ocean currents?
Answer: In Arizona, climate change is already making deadly heat waves, droughts and wildfires across the state worse. These impacts have real costs on Arizonans' health and economy, including heat-related deaths, higher electricity bills, crop losses and more.
Explanation:
https://www.edf.org/climate/costofinaction- this is where I gathered this info. Not mine. But I hope it helps!
what are 2 factors that impact the flow of energy into and out of earths systems
Answer:
Solar energy causes evaporation; uneven heating of the Earth causes air masses to move; Coriolis forces help storms to take shape; and gravity makes rivers flow downhill. Another relevant factor is the high heat capacity (or specific heat) of water.
Explanation:
hoped this helped;)
Mg + 2HCl → MgCl2 + H2
How many grams of Mg is needed to produce 100 g of H2?
H2
n=m÷Mr
n=100×2
n=200 moles
Mole ratio
Mg : H2
1 : 1
x : 200
cross multiply= x=200
Mg
make m the subject
m=n×Mr
m=200×24.305
m=4861 g
PLEASE HELP ME ASAP!!! 10 POINTS!!
The three equations below represent nuclear fission and nuclear fusion reactions. For each equation, tell whether fission or fusion has occurred and write the missing term in the equation.
A) ²³⁵₉₂ U+n→⁹⁵₃₈Sr+____+2n
B) ³₁H+²₁H→⁴₂H+____
C) ____+n→⁹²₃₉Y+¹⁴⁰₅₃I+2n
Explanation:
A) fission: Iodine-140 (atomic number = 53)
B) fusion: 1 neutron
C) fission: Uranium-233 (atomic number = 92)
what type of heat is it when a handle of a saucepan get hot when it is on the stove
Answer:
A conduct heat
Explanation:
because in cooking burners on stove will conduct heat energy to the bottom of the pan sitting on top of it. From there, the pan conducts heats to it content.
HELP ME PLS
What is the mass of a water molecule if the hydrogens each have one neutron and the oxygen has eight neutrons?
a. 10
b. 12
c. 16
d. 20
Answer:
H2O
=(1×2)+(8)
=20
Explanation:
We have 1 Hydrogen(H) and 8 Oxygen(O)neutrons . Following the molecule formula, H2O, which means we have 2 Hydrogen that needs to times with 1 neutron;and we have only 1 Oxygen which has 8 neutrons. So 2 (H) have to times 1 and 1(O) have to times 8.
A scientific is a statement that explains what always happens under very specific conditions.
O hypothesis
conclusion
a
theory
O
law
Answer:
law
Explanation:
solute separates as a solid when a saturated solution is cooled why
Answer:
When a saturated solution at a high temperature is cooled, why is the solution separated as a solid? When a saturated solution at a high temperature is cooled, inter molecular space between the molecules of the solution decreases. As a result, no more solute can remain in a solution separating out as a solid crystal.
What is the elevation of point x on rock mountain ( Ik it's blury but please help for 30 points ) ty
Explanation:
A contour map shows two locations, X and Y, 5 kilometers apart. The elevation at location X is 800 meters and the elevation at location Y is 600 meters.
What is the amount of space that a material takes up ?
volume.
The amount of space a material occupies is its volume.
Mass is measured using a scale. Volume is the amount of space matter takes up. Volume can be measured by multiplying the length, width, and height of an object, or by using a measuring cup and seeing how the measurement of water changes in a cup. Density is the amount of matter an object has in a certain space.
Answer:
Volume
Explanation:
Mass is measured using a scale. Volume is the amount of space matter takes up. Volume can be measured by multiplying the length, width, and height of an object, or by using a measuring cup and seeing how the measurement of water changes in a cup. Density is the amount of matter an object has in a certain space.
3.00 L of a gas is collected at 150 K and then allowed to expand to
15.0 L. What must the new temperature be in degrees C in order to
maintain the same pressure (as required by Charles' Law)?
Answer:
477 ºC
Explanation:
on an isobaric process, an increase on the volume implies an increase on the temperature:
V1/T1 = V2/T2
T2 = V2T1/V1 = 15.0 L×150 K/3.00 L = 750 K
t/ºC = T/K - 273 = 750 K/K - 273
t = 477 ºC
V1: initial volume
T1: initial temperature
V2: final volume
T2: final temperature
Which of the following relationships is true?
A. pH − pOH = 14
B. Ka × Kb = 1 × 10-14
C. pKa × pKb = 14
D. pKa × pKb = 1 × 10-14
Answer:
D. pKa × pKb = 1 × 10-14
Explanation:
hope this helps, if not, give me time to edit
Answer:
B. Ka × Kb = 1 × 10-14
Explanation:
yw
What form of pollution can lichens be a good indicator of?
Answer:
Lichens can be used as air pollution indicators, especially of the concentration of sulphur dioxide in the atmosphere. Lichens are organisms that grow in exposed places such as rocks or tree bark. They need to be very efficient at absorbing water and nutrients to grow there.
Which of the following statements are true?
a.
Visible light is composed of different wavelengths.
b.
The shorter the wavelength, the more refraction occurs.
c.
Different wavelengths refract at different angles.
d.
All of the above.