Answer:
Manganese (II) Phosphate
Explanation:
Mn3(PO4)2 is the compound given in this question. Manganese is the metal and hence it will come first in the name. Along with the name of metal it is essential to determine the valency of the metals based on the compound structure.
Here 2 PO4 attaches with 3 Mn
Valence of PO4 is -3
So the total electrons contributed by PO4 is 3*2 = 6
Now Mn has 3 atoms in the compound. Thus, per atom the valency must be 2 in order to satisfy -6 charge of PO4
Thus, valency of Mn is 2
So, the name will be
Manganese (II) Phosphate.
A student investigates a pure metal, X . The student takes a 100.0 g piece of metal X , heats it to 500.0°C , then places it on a 1000.0 g block of ice at 0.0°C . The ice partially melts, and the final temperature of the metal, ice, and melted water is 0.0°C . The student calculates the experimental value of the specific heat capacity of metal X and records it as 0.24 J/(g⋅°C) . Calculate the magnitude of the energy change (qmetal) of metal X during the experiment.
Answer:
q_metal = -12000 J = -12 KJ
Here, the negative sign indicates that the energy is lost by the metal piece.
Explanation:
The magnitude of energy change of the metal X can be given by the following formula:
[tex]q_{metal} = mC\Delta T[/tex]
where,
m = mass of metal = 100 g
C = Specific Heat Capacity of metal X = 0.24 J/g.°C
ΔT = Change in Temperature of Metal Piece = 0° C - 500°C = -500°C
Therefore, using these values in the equation, we get:
[tex]q_{metal} = (100\ g)(0.24\ J/g^oC)(-500^oC)\\[/tex]
q_metal = -12000 J = -12 KJ
Here, the negative sign indicates that the energy is lost by the metal piece.
Question 1
Balance the following chemical equation. __Li+___f2-->___LIF
Answer:
2Li + F2 → 2LiF
Explanation:
Hope this helps!
(16m)(x)=(0.10)(1.5l)
Answer:
0.192 M NaOH
Explanation:
hii if you answer this i’ll give you brainlist
Answer: 24.0g of NaCl.
The number seems the highest, but I am not in Honors Chem (I am taking honors biology), so I do not know.
This
Question please
Answer:
See detailed explanation.
Explanation:
Hello!
i. In this case, since the given chemical reaction is exothermic due to the negative change in the enthalpy of reaction, we infer that according to the mentioned principle, by lowering the temperature the reaction will shift rightwards and therefore the yield is increased; thus, you need a lower temperature than the specified.
ii. In this case, since the reaction has less moles at the products side, according to the mentioned principle it'd be necessary to rise the pressure in order to increase the yield, since the increase of pressure favors the reaction side with the fewest number of moles.
Best regards!
light behaves as a longitudinal wave
Answer:
No, light behaves as a Transverse Wave. All electromagnetic waves behave as transverse waves.
Predict the shape of the molecule.
B. trigonal planar
A. linear
D. bent
C. tetrahedra
why do scientist think the earths core have iron in it .
4) How much of the world population lives in countries where there isn't enough water, or
the quality has been compromised?
Answer:
The answer is 1/3 of the population.
What does it mean to neutralize a chemical solution?
Answer:
A neutralized solution in chemistry refers to the reaction between an acid and base that results in a neutral balance, or a measure of 7 on the pH scale.
Explanation:
When a precipitation reaction occurs the resulting mixture of liquid solution and solid precipitate would be considered a___________ Mixture.
When a precipitation reaction occurs the resulting mixture of liquid solution and solid precipitate would be considered a heterogeneous Mixture.
What is precipitation reaction?Chemical reactions known as precipitation reactions take place in aqueous solutions to produce precipitates. Moreover, chemical changes that occur inside the substances are a part of chemical processes.
Moreover, chemical reactions take place between two or even more chemical substances, known as reactants. As a result, the reactants might be solid, gaseous, or liquid in nature. When a precipitation reaction occurs the resulting mixture of liquid solution and solid precipitate would be considered a heterogeneous Mixture.
Therefore, when a precipitation reaction occurs the resulting mixture of liquid solution and solid precipitate would be considered a heterogeneous Mixture.
To know more about precipitation reaction, here:
https://brainly.com/question/29762381
#SPJ3
What is the IUPAC name for H2O?
Answer:
I guess it is.....
Oxidane.
Answer:
Technically, dihydrogen monoxide.
Explanation:
You see, the International Union of Pure and Applied Chemistry, also known as IUPAC, hasn't seen a need to define a structural name for water yet.
Following the naming conventions, it should most likely be called "dihydrogen monoxide", but IUPAC has never officially defined this as the chemical name for water.
PLZZZ HELP BRAINILEST (science)
Answer:
i cannot see the question due to the flash you used
Explanation:
Two plants growing close to one another are competing for resources. Which resource are they NOT likely to compete for? Choices A-Water B-Soil and nutrients C- Carbon dixoide
Answer: the resource which they are not likely to compete for is CARBONDIOXIDE. The correct option is C.
Explanation:
Competition may be defined as the a negative effect on plant growth which occurs when there is reduction in the availability of resources.
During the growth of plants, there are several resources that affects it's growth and maintenance. These resources include:
--> soil nutrients,
--> water,
--> carbondioxide and
--> sunlight
Since plants are autotrophs, that is, they manufacture their own food through the use of inorganic raw materials such as water and carbondioxide in the presence of sunlight, there may exist some level of competition for these resources when there is lack of space.
But plants are NOT likely to compete for carbondioxide because the atmospheric pool of carbondioxide is large and well mixed, therefore it won't be affected by lack of space between the two plants. Unlike the other main resources such as soil nutrients and water which are highly competed for and can determine the distribution of plants in an ecosystem.
how does the compound NaOH contain ionic and covalent bonds?
Answer:
Explanation:
OH forms a covalent bond. However, OH itself is negatively charged. Therefore, it can form ionic attractions to the positively charged sodium (Na+) ions.
(GIVING BRAINLIEST)
The table below shows the characteristics of three components of the solar system labeled A, B, and C. Which choice identifies the components in the correct order?
1 Comet, asteroid, sun
2 Moon, planet, sun
3 Moon, sun, planet
4 Sun, planet, moon
Answer:
4 sun , planet, moon are the components in the correct order
Why are ions created in an ionic bond?
what's the advantage and disadvantage of How does the number of "carbon" atoms in different alcohol affect the energy density of alcohol ( like Pentanol, butanol, propanol and methanol?
Please Help. Thank You!
A student runs 100 meters in 16 seconds. What is the speed of the student?
Answer:
6.25m/s
Explanation:
speed = distance/time
speed = 100/16 = 6.25m/s
Which molecule will undergo only London dispersion forces when interacting with other molecules of the same kind? a.HCl b.C2H5OH c.NH3 d.CH4
Answer:
CH4
Explanation:
London dispersion forces are a type of force acting between atoms and molecules that are normally electrically symmetric; that is, the electrons are symmetrically distributed with respect to the nucleus. They are part of the van der Waals forces(Wikipedia). It is a temporary attractive force that results when the electrons in two adjacent atoms occupy positions that make the atoms form temporary dipoles. This force is sometimes called an induced dipole-induced dipole attraction(Chem Purdue).
If we consider HCl, C2H5OH and NH3, we will discover that they all have polar bonds. Consequently, dipole - dipole interaction as well as hydrogen bonds exist between their molecules.
CH4 is nonpolar. Being a nonpolar molecule, the only possible intermolecular interaction forces between its molecules is the London dispersion forces.
Is the equation for reaction 1 balanced? Explain your reasoning. If the reaction is not balanced, then state how you would balance it. Then, provide the balanced equation.
Answer:
Reaction is already balanced
Explanation:
The equation in reaction 1 is given as;
CH3COOH + NaHCO3 --> CO2 + H2O + Na+ + CH3COO-
The reaction is already balanced. This is because the umber of atoms of elements in the reactant is equal to that of the products
Carbon
Reactant = 2 + 1 = 3
Product = 2 + 2 = 3
Hydrogen
Reactant = 3 + 1 + 1 = 5
Product = 2 + 3 = 5
Oxygen
Reactant = 2 + 3 = 5
Product = 2 +1 + 2 = 5
Sodium
Reactant = 1
Product = 1
Answer:
The reaction is already balanced because the number of atoms in the reactant is equal to the products
Explanation:
According to the Law of Conservation of Mass, how much water is produced if 22.5 g of
CHA react with 35.7g of Oz to form 48.9g of CO2?
CH4 + O2 + CO2 + H2O
o 107.1g
o 71.4g
o 62.1g
o 9.3g
8
9
10 11
12 13 14 15 16 17
Ne
Answer: The amount of water produced is 9.3 grams
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]
mass of reactants = mass of methane + mass of oxygen = 22.5 g + 35.7 g = 58.2 g
mass of products = mass of carbon dioxide + mass of water = 48.9 g + mass of water
48.9 g + mass of water = 58.2 g
mass of water = 9.3 g
i really need help:/ my friend is helping and nobody understands it
Answer:
A= Compound
B= Mixture
C= Element
D= Element
Explanation:
A has two different types of atoms chemically together as a compound
B is made up of two or more different atoms not chemically joined together
C has one type of atom
D has one type of molecule. They're the same and could be a diatomic element like hydrogen
Sorry if this is confusing or wrong
FREE BRAINLIST NEED HELP ASAP
What is the relationship between mole, Avogadro number and mass?
a.1mole=6.022 × 1023 atoms and molecules= g atomic/molecular mass
b. 1mole =6.022 × 1023 atoms and molecules /1 g atomic/molecular mass
c. 2mole=6.022 × 1023 atoms and molecules=1 g atomic/molecular mass
d. 1mole < 6.022 × 1023 atoms and molecules=1 g atomic/molecular mass
Answer:
The mass of one mole of a substance is equal to that substance's molecular weight. ... water is 18.015 atomic mass units (amu), so one mole of water weight 18.015 grams. ... Avogadro's number is a proportion that relates molar mass on an atomic ... one molecule of water (H2O), one mole of oxygen (6.022×1023 of O atoms)
Which statement describes the reaction involved in cellular respiration?
A. Sugar is produced and stored until it is needed for energy.
B. CO2 is removed from the atmosphere, and O2 is released into the
atmosphere.
C. It is a redox reaction in which energy is released to ATP molecules.
D. O2 is removed from the atmosphere, and CO2 is released into the
atmosphere.
Answer:
C
Explanation:
Cellular respiration is the metabolic process and is a reduction-oxidation reaction that yields ATP molecules. Thus, option C is accurate.
What is cellular respiration?It is a redox reaction that utilizes glucose and oxygen molecules to release carbon dioxide and energy in the form of ATP. This energy released is used to drive the functions and roles of the cells.
The food molecule, glucose is broken in the presence of the oxygen molecule to release the carbon dioxide and the energy from the cells that are in the form of adenosine triphosphate molecule.
Therefore, option C. cellular respiration is a redox reaction is correct.
Learn more about cellular respiration here:
https://brainly.com/question/19508709
#SPJ2
Pick three properties of water that you think are the most important for life to exist.
Explain how that property works in nature and why it is one of the most important properties to sustain life. PLEASE HELP ME ASAP ON THIS QUESTION !!!!
Answer:
Water's unique density, high specific heat, cohesion, adhesion, and solvent abilities allow it to support life.
Explanation:
Which statement is correct about the law of conservation of energy?
Energy is created when water freezes.
Energy is destroyed when sugar is burned.
Energy stays inside molecules permanently.
Energy is transferred when atoms are rearranged.
Answer:
Energy is transferred when atoms are rearranged
Explanation:
Breaking bonds between atoms need energy. When new bonds are formed, energy is released
The law of conservation of energy is energy isn't created or destroyed
A and B are wrong because there is creation or destruction of energy
C is wrong because energy can be transferred (think touching a hot stove with your finger. heat is transferred from the stove to your finger OUCH!)
D is correct because the energy is still there, but in a different form
2. Describe two ways in which you could decide when an
acid has been completely neutralised by an insoluble
carbonate.
Answer:
search in chrome u will get your answer
Explanation: