Answer:
Hey mate...
Explanation:
This is ur answer.....
This is because fluorine atoms are the smallest of the halogens—the atoms are bonded close together, which leads to repulsion between free electrons in the two fluorine atoms.
Hope it helps you,
mark me as the brainliest....
Follow me! :)
moles are in 4.3 * 10^22 molecules of H3PO4
Answer:
The answer is 0.073
Explanation:
Final step: 0.73 x 10^-1
Write the chemical equation for water
Answer:
H2O
Explanation:
Describe the bonding process when two hydrogen atoms combine to
form a diatomic molecule of hydrogen.
Answer:
The electrons located between the two nuclei are bonding electrons. A hydrogen molecule forms from two hydrogen atoms, each with one electron in a 1 s orbital. The two hydrogen atoms are attracted to the same pair of electrons in the covalent bond. The bond is represented either as a pair of dots or as a solid line.
Which element would have a larger
atomic radius?
Magnesium (Mg)
Chlorine (CT)
An atom or bonded group of atoms with a positive or neqative charge
Answer:
Radical
Explanation:
Wait did I get your quiz right? Are you asking for the name? If so it's radical
HELP
What is the total pressure of a wet gas mixture at 60°C, containing water vapor, nitrogen, and helium. The partial pressures are
Pnitrogen - 53.0 kPa and Phelium = 25.5 kPa.
Answer:
98.4 kPa
Explanation:
Step 1: Given and required data
Partial pressure of water vapor at 60°C (pH₂O): 19.9 kPa (this info is tabulated)Partial pressure of nitrogen (pN₂): 53.0 kPaPartial pressure of helium (pHe): 25.5 kPaStep 2: Calculate the total pressure of the gaseous mixture
The total pressure of the gaseous mixture (P) os equal to the sum of the partial pressures of the gases that form it.
P = pH₂O + pN₂ + pHe
P = 19.9 kPa + 53.0 kPa + 25.5 kPa = 98.4 kPa
The total pressure of the wet gas mixture is 98.4 KPa
Dalton's law of partial pressureThis law states that at constant temperature, the total pressure of a mixture of gases is equal to the sum of the partial pressure exerted by each gas. Mathematically, it is expressed as
Total pressure = partial pressure of A + partial pressure of B
How to determine the total pressure Partial pressure of water vapor at 60°C (pH₂O) = 19.9 KPa Partial pressure of nitrogen (pN₂) = 53.0 KPa Partial pressure of helium (pHe) = 25.5 KPa Total pressure (P) =?P = pH₂O + pN₂ + pHe
P = 19.9 + 53 + 25.5
P = 98.4 KPa
Learn more about partial pressure:
https://brainly.com/question/15577259
SeS3 covalent compound name?
Answer:
Selenium trisulfide
Oday, you will observe drops of liquid water and compare them to drops of liquid isopropanol, noting whether either liquid evaporates. Given that the energy transferred in from the air will be the same for both liquids, make a prediction about whether both drops or only one drop will evaporate within five minutes. Explain your prediction below.
Answer:
Liquid isopropanol.
Explanation:
Liquid isopropanol will evaporate earlier than water because the boiling point of isopropanol is less than water. That liquid which have high boiling point require more heat energy for change into vapor state as compared to those liquids that has low boiling point. The isopropanol has boiling point i.e. 82.5 °C while on the other hand, water has boiling point i.e. 100 °C so we can say that isopropanol will evaporate first.
The liquid that will be the first to evaporate within 5 minutes is; Liquid Isopropanol
We have the 2 liquids as;
Liquid Isopropanol
Liquid water
Now, since we are dealing with the one that will evaporate within five minutes, we need to know their boiling points.
From online research;
Boiling point of liquid isopropanol is 82.5°C
Boiling point of liquid water is 100°C
Now, we are told that the same energy is transferred for both liquids. However, boiling point of the liquid with the lower boiling point will be achieved first and as a result will evaporate first since the next stage after boiling point is evaporation of steam.
Read more at;https://brainly.com/question/25324798
what is the SI unit that represents the amount of substance?
Answer:
Mole
Explanation:
In solids, amount of substance is given by;
n = mass/molar mass
n will have a unit of mole
However, in liquids, amount of substance is;
n = concentration × volume
Again, n will be in mole
Thus, the SI unit that represents the amount of substance is mole
How many moles of methane gas are in 44.8 L of CH at STP?
Answer:
2 mol CH 4
Explanation:
43.8 x L
---------------- = 2 mol CH 4
22.4 x L x mol - 1
What are the formulas for the products of the reaction:
Calcium Chloride + Silver Nitrate →
CaAg + ClNO3
CaNO3 + AgCl2
CaAg + ClN
CaNO3 + AgCl
Ca(NO3)2 + AgCl
Answer:
CaCl2 + 2AgNO3 = Ca(NO3)2 + 2AgCl
Explanation:
Calcium chloride reacts with silver nitrate to produce calcium nitrate and silver(1) chloride
What is the correct illustration of the bonding that occurs in H2O?
Answer:
covalent is the bonding that occurs in H2O
Explanation:
how many electrons will be in the valence of non- H atoms when they make covalent bonds?
Answer:
Please one time click here
Mark brainliest
PLZ HELPP!!! WILL GIVE EXTRA POINTS AND BRAINLIEST!!! DUE IN 15 MINUTES!!!
As a scuba diving air tank is filled with air, the air is compressed in the tank to as much as 3000 psi of pressure. When filling the tank, it is observed that the tank becomes warmer.
Which argument BEST explains why this occurs?
A
When air is compressed, it turns solid. A short time later, the air evaporates back into a gas which releases heat.
B
When air is compressed, the molecules line up into a crystalline structure. As the molecules line up, they release energy in the form of heat.
C
When air is put into the tank, it expands rapidly, thereby raising the temperature.
D
Air molecules are free to move and as more air is added to the tank, the molecules move and collide faster which raises the temperature.
Answer:
The gas under pressure subjected to heat can cause the tank to explode. A scuba tank filled to capacity with compressed air at 3000 psi could just as easily go up to 3400-3500 psi if heated
Explanation:
Air molecules are free to move and as more air is added to the tank, the molecules move and collide faster which raises the temperature. Hence option D is correct.
What is pressure?Pressure is defined as the force applied perpendicularly to an object's surface divided by the surface area over which it is applied. The movement of the molecules and the collisions they have with one another and the vessel walls cause the pressure to build up. According to general relativity theory, pressure contributes to the mass-energy cause of gravity by making a gravitational field stronger.
The tank may blow up if the gas within was under pressure and exposed to heat. If heated, the pressure of a scuba tank filled to capacity with compressed air at 3000 psi may readily increase to 3400-3500 psi. Because air molecules are free to move, the temperature in the tank rises as more air is introduced, as the molecules move and collide more quickly.
Thus, air molecules are free to move and as more air is added to the tank, the molecules move and collide faster which raises the temperature. Hence option D is correct.
To learn more about pressure, refer to the link below:
https://brainly.com/question/12971272
#SPJ2
state the Constituents of the following alloys:magnalium and bronze
At a certain grocery store a 0.500 pound container of ground cinnamon cost $6.98 (excluding tax). Cinnamon has a density of 0.560 g/Ml. How much would 500.0 mL of cinnamon cost?
Answer:
The cinnamon cost would be "$8.62". A further explanation is given below.
Explanation:
Cinnamon's density,
= 0.560 g/ml
On converting it into g, we get
= [tex]0.560\times 500[/tex]
= [tex]280 \ g[/tex]
Cinnamon's volume,
= 500 ml
As we know,
1 pound = 435.592 g
Now,
The cost pf cinnamon per pound will be:
= [tex]\frac{6.98}{0.5 \ pound}[/tex]
= [tex]13.96[/tex] ($) per pound
So,
Cinnamon's cost will be:
= [tex]250 \ g\times \frac{1 \ pound}{435.592 \ g}\times \frac{13.96}{1 \ pound}[/tex]
= [tex]8.62[/tex] ($)
Need help with this please help ASAP
Answer:
The correct answer would be -
17. 50% chances of round offspring
18. 25% chances two copies of dominant allele in the genotype of offspring
Explanation:
17. In this question it is stated that the Spongebob is heterozygous and has a square body which means the square body is dominant over the round that is present in sponge Susie that means she has two copies of the recessive allele.
S for square trait and s for a round trait then
S s
s Ss ss
s Ss ss
Thus, the correct answer is 50 percent as there are only two copies of ss.
18. in this question Patric and Patti both have heterozygous for the pink (P) body-color dominant over yellow (p). The chances for the true-breeding dominant genotype would be -
P p
P PP Pp
p Pp pp
There is only one out of four rue-breeding dominant offspring will be produced.
12) Balance the following chemical equation:
Zn +
H3PO4
Zn3(PO4)2 +
H2
Answer:
Sorry I am not very good at chemistry.
Explanation:
A solution is found to have a pH of 8.3. What is the hydroxide ion, [OH-]
concentration?
Answer:
[OH-] = 2 x 10^-6 M
Explanation:
Calculate pOH first: 14 - pH = pOH --> pH = 14 - 8.3 = 5.7
[OH-] = 10^-pOH = 10^-5.7 = 2 x 10^-6 M
Only one sig fig in the concentration, because the pH only had one decimal place.
Please help ASAP I’ll mark you as brainlister:(((!!!!!!!!
Answer:
c. Gas particles don't interact
Explanation:
Ideal gas particles do not interact with each other.
The gas molecules do not interact with each other except for colliding with each other. Gases expand to completely fill a container; they would not if they were attracted to each other. That being said, they obviously still do, as a result of Dalton's Law.
13. An organic compound is found to contain 77.42% of C, 7.53% of H and
nitrogen. The mass of 1.12L of its vapour at NTP is 4.65g. Determine
the
empirical and molecular formula of the compound.
Answer
7.53% 97% if you divide it you can get the answer
Explanation:
What is the volume of 45.6 g of silver if the density of silver is 10.5 g/mL?
a. 0.23 mL
b. 4.34 mL
c. 479 mL
What creates a bond dipole and how can you tell if a bond dipole exists?
Answer:
A dipole exists when there are areas of asymmetrical positive and negative charges in a molecule. Dipole moments increase with ionic bond character and decrease with covalent bond character.
What is the molarity of 3 mole of hydrochloride acid in 3 L of water ?
Answer:
1
Explanation:
Formula of molarity is
[tex]M=\frac{n}{v}[/tex]
M= molarity
n= no of moles
v= volume in liters (if mL then you have to convert it to L)
An intravenous solution of mannitol is used as a diuretic to increase the loss of sodium and chloride by a patient. If a patient receives 30.0 mL of 25% (m/v) mannitol solution, how many grams of mannitol were given?
Answer:
Explanation:
25 % ( m / v ) mannitol solution means 25 gram in 100 cc of water
25 gram in 100 mL of water
grams of mannitol in 30 mL = 25 x 30 / 100
= 7.5 grams .
What is the pOH of a substance when [H+] = 5.4 x 10^-8 M
Answer:
pOH = 6.73
Explanation:
First, calculate pH = -log[H+] = -log(5.4 x 10^-8) = 7.27
pOH + pH = 14, so pOH = 14 - 7.27 = 6.73
DO 25 through 37 WRITE IF ITS TRUE OR FALSE FOR EACH ONE. ILL MARK YOU AS BRAINLIEST IF YOU COMPLETE IT AND ALSO SEND ME YOUR CASHAPP NAME SO I SEND YOU $25.
The mass numbers for the elements in the periodic table.............as the atomic numbers.................. *
a. increase; decrease
b. increase; increase
c. decrease; decrease
d. decrease; increase
Answer:
d
Explanation:
I am trying to figure out what blood type the father of my son could have since my son and I are both type A. Also, my brother is type o and my mom is A.
Answer:
It could probably be O.
Explanation:
Just like eye or hair color, our blood type is inherited from our parents. Each biological parent donates one of two ABO genes to their child. The A and B genes are dominant and the O gene is recessive. For example, if an O gene is paired with an A gene, the blood type will be A.
Explain why it is necessary to use a mixture, alumina and cryolite, rather than just
alumina
Explanation:
The mixture of cryolite and aluminium oxide has a lower melting point than pure aluminium oxide. This means a lower amount of energy is required to establish effective conditions for electrolysis and thus makes it more cost effective.