What is the percent composition of oxygen in Iron(III) oxide? (Round to three sig figs)

Fe2O3 159.7g/mol
Fe =55.85 x 2 =111.7 g/mol
O = 16.00 x 3 = 48.00 g/mol


____% O

Answer:

Speed is how fast you are going at the moment but acceleration is how fast you are building up speed to get to a set point

Explanation:

Answer:Magnesium (Mg) is a - reactant

Hydrogen (H2) is a - product

magnesium chloride (MgCI2) is a - product

hydrochloric acid (HCI) is a - reactant

Explanation: It’s in my notes

The conjugate base is formed when an acid loses its hydrogen or proton. In the reaction between ammonium ion and hydrogen phosphate, HPO₄²⁻ is the conjugate base. Thus, option C is correct.

Conjugate bases are formed when the substance accepts or absorbs the proton or the hydrogen ion from the acids in the solution. It can be said as a base with an added hydrogen ion to it.

The chemical reaction of the acids and the bases has been shown as,

NH₄⁺ + HPO₄²⁻ → NH₃⁺ +  H₂PO₄⁻

From the reaction, it can be said that ammonia donated its proton, whereas HPO₄²⁻ accepted hydrogen ions from the acid.

Therefore, HPO₄²⁻ has been the conjugate base in the given chemical reaction.

Learn more about conjugate base here:

https://brainly.com/question/12883745

#SPJ5

Answer:

equal to - it's opposite but equal energy is the third law

Answer:

The Answer is A. Scavengers

Answer:

26.78 kJ

Explanation:

To solve the problem, we have to first write the stoichiometric coefficients in the chemical equation:

2P + 3Cl₂ → 2PCl₃

With these coefficients, we have the same number of atoms of each chemical element on both sides: 2 atoms of P, 6 atoms of Cl.

According to the equation, 2 moles of phosphorous (P) react with 3 moles of chlorine (Cl₂), and 574 kJ of energy are released. We have to figure out which is the limiting reactant. For this, we convert the mass into moles by using the molar mass(MM):

MM(P) = 30.9 g/mol

67.04 g P/(30.9 g/mol) = 2.17 mol P

MM(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol

10.20 g Cl₂/(70.8 g/mol) = 0.14 mol Cl₂

Now, we multiply the actual moles of P (the amount we have for the reaction) by the stoichiometric ratio given by the chemical equation (3 mol Cl₂/2 mol P):

2.17 mol P x (3 mol Cl₂/2 mol P) = 3.25 mol Cl₂

To completely react 67.04 g P, we need 3.25 mol of Cl₂, and we have only 0.14 moles of Cl₂, so the limiting reactant is Cl₂.

Now, we use the limiting reactant to calculate the energy released from the reaction. The energy released per mole of Cl₂ is:

ΔH/(3 mol Cl₂) = -574 kJ/3 mol Cl₂= 191.3 kJ/mol Cl₂

Finally, we multiply the energy released per mole of Cl₂ by the number of moles of Cl₂ we have:

0.14 mol Cl₂ x 191.3 kJ/mol Cl₂ = 26.78 kJ

Answer:

NaOH

Explanation:

NaOH is among the water soluble bases

Answer:

1. in the Northern Hemisphere the vernal equinox falls about March 20 or 21, as the Sun crosses the celestial equator going north. In the Southern Hemisphere the equinox occurs on September 22 or 23, when the Sun moves south across the celestial equator.

Explanation:

Hope this helps ^^

Answer:

Option C.

Ilegal dumping of waste

Explanation:

This is because non point source of pollution refers to source of pollution that are many and not directly one which is illegal or does not meet the legal term. This type of pollution does not have a point source, it has many sources and this type of pollution is cause by rainfall or precipitation. Where when the rain fall, it wash away the waste through to water bodies, causing pollution and endangering water bodies.

False.....................

Answer:

They would be pushed out and lose their homes

Explanation:

A wildfire destroys most of the plant life in a forest. Animals would be pushed out and lose their homes.

An unplanned, uncontrolled, and unpredictable fire inside an area of flammable vegetation is known by several names, including wildfire, bushfire, bushfire, wildland fire, and rural fire. A wildfire may be more precisely referred to by the terms bushfire, desert fire, forest fire, hill fire, peatland fire, prairie fire, vegetable fire, or veld fire, depending on the kind of vegetation that is present.

Wildfires are separate from controlled and prescribed burning, which is a good human use of wildland fire, even though controlled burns have the potential to turn into wildfires. Wildfires likely started shortly after terrestrial plants first appeared, which occurred in the Silurian epoch 419 million years ago, according to fossil charcoal. A wildfire destroys most of the plant life in a forest. Animals would be pushed out and lose their homes.

Therefore, animals would be pushed out and lose their homes.

To know more about wildfire, here:

https://brainly.com/question/12110285

#SPJ3

Answer:

4180J

Explanation:

(25.0g)(4.184J/g°C)(75°C-35.0°C)

(25.0g)(40.0°C)(4.184J/g°C)

(1.00*10³g°C)(4.184J/g°C) = 4184J

use sig figs:

4180J

Answer: yes, it's soluble in water.

Answer: D

Explanation: an increase in surface area of A

Answer:

I don't think there is any metal matches with this condition

Answer:

DONT PRESS THAT LINK IT IS VIRUS AND HACK

Explanation:

Answer:chemical

Explanation:

Answer:

I think it is C

Explanation:

I just do.

Answer:

1: As the temperature rises, the equilibrium moves towards the products

2: The higher the pressure, the higher the equilibrium goes to the reactants

3: By removing chlorine, the equilibrium moves towards the products

Answer:

biological

Explanation:

i took the test and got it right

Answer:

B) Lithium

C) Barium

F) Potassium

Explanation:

All of the above are Inorganic Compounds.

Answer:

[tex]\boxed {\boxed {\sf Cobalt, Iron, and \ Copper}}[/tex]

Explanation:

The Stock System states that In a chemical formula or equation, some metals need a roman numeral after their symbol. If a metal has multiple oxidation states, it needs a roman numeral.

Use the Periodic Table to see the oxidation states for each metal.

We can see that cobalt, iron, and copper have more than one oxidation state, so they would require a roman numeral.

Answer:

nucleus i think

Explanation:

Answer:

239.7mL

Explanation:

Using the general gas equation;

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = gas constant (0.0821 Latm/molK)

T = temperature (K)

The balanced chemical equation in this question is as follows:

CaC2(s) + 2H2O(l) --> Ca(OH)2(aq) + C2H2(g)

From the equation, 1 mole of CaC2 produces 1 mole of ethylene gas, C2H2.

Using mole = mass/molar mass

Molar mass of CaC2 = 40 + 12(2)

= 40 + 24

= 64g/mol

mole = 0.5487/64

mole = 0.00857mol of CaC2

Hence, 0.00857mol of CaC2 produced 0.00857mol of C2H2

Based on the information provided, n = 0.00857mol, T = 43°C = 43 + 273 = 316K, p = 0.926 atm

PV = nRT

V = nRT/P

V = 0.00857 × 0.0821 × 316/0.926

V = 0.222/0.926

V = 0.2397L

In mL, volume = 0.2397 × 1000

= 239.7mL

Answer:

1. true

2. existing matter

3. the materials simply turn into gases you cannot see

hope that helps! ☺

plz mark Brainliest!

Answer:

No, I don't think so at least

Explanation:

In chemistry, you do calculations to find the concentration of a solution with another solution of KNOWN concentration. Without concentrations of either solution, were would you get values from? Where would you start? :3

You can not titrate  a solution of unknown concentration with another solution of unknown concentration and still get a meaningful answer.

Titration involves the standardization of unknown solution using a standard solution. By this definition, titration must involve a standard solution.

Since the two unknown solutions are not standardized, we can never get a meaningful answer because we can not be able to perform any calculation unless we have a standard solution.

Learn more: https://brainly.com/question/2728613

Answer:

mmmh..

Explanation:

sorryy id really ñike to help but i just dont know it...

Answer:

Asexual reproduction .

Explanation:

Asexual reproduction is a type of reproduction that does not involve the fusion of gametes or change in the number of chromosomes. The offspring that arise by asexual reproduction from either unicellular or multicellular organisms inherit the full set of genes of their single parent.

Answer:

Number of moles = 0.075 mol

Explanation:

Volume = 500.0 mL = 0.5 (Converting to L by dividing by 1000)

Molarity = 0.15 M

Number of moles = ?

The relationship between the quantities is given as;

Molarity  = Number of moles / Volume

Number of moles = Molarity * Volume

Number of moles = 0.15  * 0.5

Number of moles = 0.075 mol