Answer: The [tex][OH^-][/tex] of a solution is [tex]10^{-12}[/tex] M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in ml
moles of [tex]HCl[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{0.0912g}{36.5g/mol}=0.0025mol[/tex]
Now put all the given values in the formula of molality, we get
[tex]Molarity=\frac{0.0025\times 1000}{250}=0.01[/tex]
pH or pOH is the measure of acidity or alkalinity of a solution.
[tex]HCl\rightarrow H^++Cl^{-}[/tex]
According to stoichiometry,
1 mole of [tex]HCl[/tex] gives 1 mole of [tex]H^+[/tex]
Thus [tex]0.01[/tex] moles of [tex]HCl[/tex] gives =[tex]\frac{1}{1}\times 0.01=0.01[/tex] moles of [tex]H^+[/tex]
Putting in the values:
[tex][H^+][OH^-]=10^{-14}[/tex]
[tex][0.01][OH^-]=10^{-14}[/tex]
[tex][OH^-]=10^{-12}[/tex]
Thus the [tex][OH^-][/tex] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution is [tex]10^{-12}[/tex] M
The [OH-] of a solution is [tex]10^{12}[/tex] M.
What is Molarity?Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
M = n/ V..................(1)
where,
n = moles of solute
V = volume of solution in ml
Calculation for number of moles:
Moles of HCl = 0.0912 g/ 36.5 g/mol = 0.0025 mol
On substituting the values in equation 1:
M = n/ V
M= 0.0025*1000 / 250
M=0.01 M
pH or pOH is the measure of acidity or alkalinity of a solution.
[tex]HCl---- > H^++Cl^-[/tex]
According to stoichiometry,
1 mole of HCl gives 1 mole of [tex]H^+[/tex]
Thus, 0.01 moles of HCl gives = 1 / 1 *0.01 = 0.01 mole of [tex]H^+[/tex]
On adding the values:
[tex][H^+][OH^-]=10^{14}\\\\(0.01)[OH^-]=10^{-14}\\\\OH^-=10^{-12}[/tex]
Thus, the [OH-] of a solution prepared by dissolving 0.0912 g of hydrogen chloride in sufficient pure water to prepare 250.0 ml of solution is [tex]10^{-12}[/tex] M.
Find more information about pH here:
brainly.com/question/13557815
The activation energy of the uncatalyzed reaction is about 3.98 times that of the catalyzed reaction with activation energy of 4.6 kJ. The uncatalyzed reaction has such a large activation energy that its rate is extremely slow. What is the activation energy for the uncatalyzed reaction
Answer:
18.308 KJ
Explanation:
From the given above, we obtained the following:
Activation energy for the catalyzed reaction = 4.6 kJ.
Activation energy for the uncatalyzed reaction =..?
Now, a careful observation of the question revealed that the activation energy of the uncatalyzed reaction is about 3.98 times that of the catalyzed reaction.
With this vital information, we can thus, calculate the activation energy of the uncatalyzed reaction as follow:
Activation energy for the uncatalyzed reaction = 3.98 times that of the catalyzed reaction.
Activation energy for the uncatalyzed reaction = 3.98 x 4.6 kJ = 18.308 KJ
Therefore, the activation energy of the uncatalyzed reaction is 18.308 KJ.
2.
Name the following compounds:
a. Rb20
Answer:
Rubidium oxide
Explanation:
Suppose that you add 26.7 g of an unknown molecular compound to 0.250 kg of benzene, which has a K f of 5.12 oC/m. With the added solute, you find that there is a freezing point depression of 2.74 oC compared to pure benzene. What is the molar mass of the unknown compound
Answer: The molar mass of the unknown compound is 200 g/mol
Explanation:
Depression in freezing point is given by:
[tex]\Delta T_f=i\times K_f\times m[/tex]
[tex]\Delta T_f=2.74^0C[/tex] = Depression in freezing point
i= vant hoff factor = 1 (for molecular compound)
[tex]K_f[/tex] = freezing point constant = [tex]5.12^0C/m[/tex]
m= molality
[tex]\Delta T_f=i\times K_f\times \frac{\text{mass of solute}}{\text{molar mass of solute}\times \text{weight of solvent in kg}}[/tex]
Weight of solvent (benzene)= 0.250 kg
Molar mass of solute = M g/mol
Mass of solute = 26.7 g
[tex]2.74^0C=1\times 5.12\times \frac{26.7g}{Mg/mol\times 0.250kg}[/tex]
[tex]M=200g/mol[/tex]
Thus the molar mass of the unknown compound is 200 g/mol
The molar mass of an unknown solute compound in the solution has been 199.626 g/mol.
With the addition of the solute to the solution, there has been a depression in the freezing point. The depression in the freezing point can be expressed as:
Depression in freezing point = Van't Hoff factor × Freezing point constant × molality
The molality can be defined as the moles of solute per kg solvent
Molaity = [tex]\rm \dfrac{Mass\;of\;solute\;(g)}{Molecular\;mass\;of\;solute}\;\times\;\dfrac{1}{Mass\;of\;solvent\;(kg)}[/tex]
The depression in freezing point can be given as:
Depression in freezing point = Van't Hoff factor × Freezing point constant × [tex]\rm \dfrac{Mass\;of\;solute\;(g)}{Molecular\;mass\;of\;solute}\;\times\;\dfrac{1}{Mass\;of\;solvent\;(kg)}[/tex] ......(i)
Given, the depression in freezing point = 2.74 [tex]\rm ^\circ C[/tex]
Van't Hoff factor = 1 (Molecular compound)
Freezing point constant (Kf) = 5.12 [tex]\rm ^\circ C[/tex]/m
Mass of solute = 26.7 g
Mass of solvent = 0.250 kg
Substituting the values in equation (i):
2.74 [tex]\rm ^\circ C[/tex] = 1 × 5.12
[tex]\rm \dfrac{2.74}{5.12}[/tex] = [tex]\rm \dfrac{1}{Molecular\;mass\;of\;solute}\;\times\;\dfrac{26.7}{0.250\;kg}[/tex]
0.535 = [tex]\rm \dfrac{1}{Molecular\;mass\;of\;solute}\;\times\;106.8[/tex]
Molecular mass of solute = [tex]\rm \dfrac{106.8}{0.535}[/tex] g/mol
Molecular mass of solute = 199.626 g/mol
The molar mass of an unknown solute compound in the solution has been 199.626 g/mol.
For more information about the molality of the compound, refer to the link:
https://brainly.com/question/7229194
The activation energy for the decomposition of HI is 183 kJ/mol. At 573 K, the rate constant was measured to be 2.91 x 10^{-6} M/s. At what temperature in Kelvin does the reaction have a rate constant of 0.0760 M/s
Answer:
[tex]T_2=453.05K[/tex]
Explanation:
Hello,
In this case, the temperature-variable Arrhenius equation is written as:
[tex]\frac{k(T_2)}{k(T_1)}=exp(\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} ))[/tex]
Now, for us to solve for the temperature by which the reaction rate constant is 0.0760M/s we proceed as shown below:
[tex]ln(\frac{k(T_2)}{k(T_1)})=\frac{Ea}{R}(\frac{1}{T_2}-\frac{1}{T_1} )\\ln(\frac{0.0760M/s}{0.00000291M/s} )=\frac{183000J/mol}{8.314J/(mol*K)} *(\frac{1}{T_2} -\frac{1}{573K} )\\\frac{1}{T_2} -\frac{1}{573K} =\frac{10.17}{22011.06K^{-1}} \\\\\frac{1}{T_2}=4.62x10^{-4}K^{-1}+\frac{1}{573K}\\\\\frac{1}{T_2}=2.21x10^{-3}K^{-1}\\\\T_2=453.05K[/tex]
Regards.
Which land feature supports the theory of continental drift?
A.canyons B.volcanoes C.coal fields D.oceans
Answer:
Coals
Explanation:
The land feature that supports the theory of continental drift is ; ( C ) coal fields
Continental drift is the gradual shift in position of the earth tectonic plates ( i.e. gradual shift in the continents in relation to ocean basins) and this due to the heat from the earths' mantle.
Coal fields supports this theory because the it is an area where coal is found in large quantities and mined for commercial purposes. coal fields areas are found as a result of continental drift.
Hence we can conclude that the land feature that supports the theory of continental drift is coal fields
Learn more : https://brainly.com/question/11347898
Hypochlorous acid is formed in situ by reaction of aq. sodium hypochlorite solution with acetic acid. Draw balanced chemical equations to show the formation of hypochlorous acid and protonated hypochlorous acid.
Answer:
NaClO + CH₃COOH ----> HClO + CH3CO- + Na
Explanation:
This reaction occurs between the combination of a salt and an acid, that is, an oxide-reduction reaction
The authors state in the general procedures that the reaction was monitored by TLC. How would this be done? What would you spot in each lane? How would you know the reaction was done?
Answer:
Thin Layer Chromatography (TLC) can be used to analyze chemical reactions. During this reaction monitoring, a typical TLC plate would have three spots: the reactant lane, the reaction mixture lane, and a "co-spot" where reaction product would be spotted directly on top of reactant.
The co-spot serves as a reference point and is vital for reactions where reactant and product have similar Rfs, and many other variations of eluent tracking.
To indicate completion of the reaction, the disappearance of a spot (usually the starting reactant) is observed.
"The pH of a solution of household ammonia, a 0.950-M solution of NH3, is 11.612. What is Kb" for NH3
Answer:
Kb = 1.77x10⁻⁵
Explanation:
When NH₃, a weak base, is in equilibrium with waterm the reaction that occurs is:
NH₃(aq) + H₂O(l) ⇄ NH₄⁺(aq) + OH⁻(aq)
And the dissociation constant, Kb, for this equilibrium is:
Kb = [NH₄⁺] [OH⁻] / [NH₃]
To find Kb you need to find the concentration of each species. The equilibrium concentrations are:
[NH₃] = 0.950M - X
[NH₄⁺] = X
[OH⁻] = X
Where X is reaction coordinate.
You can know [OH⁻] and, therefore, X, with pH of the solution, thus:
pH = -log [H⁺] = 11.612
[H⁺] = 2.4434x10⁻¹²
As 1x10⁻¹⁴ = [H⁺] [OH⁻]
1x10⁻¹⁴ / 2.4434x10⁻¹² = [OH⁻]
4.0926x10⁻³ = [OH⁻] = X
Replacing, concentrations of the species are:
[NH₃] = 0.950M - X
[NH₄⁺] = X
[OH⁻] = X
[NH₃] = 0.9459M
[NH₄⁺] = 4.0926x10⁻³M
[OH⁻] = 4.0926x10⁻³M
Replacing in Kb expression:
Kb = [NH₄⁺] [OH⁻] / [NH₃]
Kb = [4.0926x10⁻³M] [4.0926x10⁻³M] / [0.9459M]
Kb = 1.77x10⁻⁵The branch of science which deals with the chemical bond is called Chemistry.
The correct answer to the question is [tex]Kb = 1.77*10^{-5[/tex]
Explanation:
When NH₃, is acts as a weak base it forms an equilibrium with water the reaction occurs is:
[tex]NH_3(aq) + H_2O(l) ---><NH_4^+(aq) + OH^-(aq)[/tex]
The formula we gonna use is as follows:-
[tex]Kb = \frac{[NH_4^+] [OH^-]}{[NH_3]}[/tex]
The data is given in the question is as follows:-
[NH₃] = 0.950M - X [NH₄⁺] = X [OH⁻] = X
Where X stands for reaction coordinate.
After solving the ph of the compound the value is as follows:-
[NH₃] = [tex]0.9459M[/tex] [NH₄⁺] = [tex]4.0926*10^{-3}M[/tex] [OH⁻] = [tex]4.0926*10^{-3}M[/tex]
Putting the value in the formula.
[tex]Kb = \frac{[4.0926*10^{-3}M] [4.0926*10^{-3}M]}{[0.9459M]}[/tex]
After solving the equation the value of Kb is [tex]1.77*10^{-5[/tex]
Hence, the correct answer is [tex]1.77*10^{-5[/tex]
For more information, refer to the link:-
https://brainly.com/question/25026730
differentiate between satured and unsatured fats
Answer:
...
Explanation:
in saturated fats there is no double bond between the acids and are tightly packed and unsaturated fats arent tight and loosely packed/put together
saturated- solid at room temperature
unsaturated= liquid at room temperature
two types of unsaturated fats, Polyunsaturated fats and Monounsaturated fats
Searches related to If 0.75 grams of iron (Fe) react according to the following reaction, how many grams of copper (Cu) will be produced? Fe + CuSO4 -> Cu + FeSO4
Answer:
0.83 g
Explanation:
Step 1: Write the balanced equation
Fe + CuSO₄ ⇒ Cu + FeSO₄
Step 2: Calculate the moles corresponding to 0.75 g of Fe
The molar mass of Fe is 55.85 g/mol.
[tex]0.75g \times \frac{1mol}{55.85g} = 0.013 mol[/tex]
Step 3: Calculate the moles of Cu produced from 0.013 moles of Fe
The molar ratio of Fe to Cu is 1:1. The moles of Cu produced are 1/1 × 0.013 mol = 0.013 mol.
Step 4: Calculate the mass corresponding to 0.013 moles of Cu
The molar mass of Cu is 63.55 g/mol.
[tex]0.013mol \times \frac{63.55g}{mol} = 0.83 g[/tex]
Answer:
If 0.75 grams of iron (Fe) react, 0.85 grams of copper (Cu) will be produced.
Explanation:
You know the following balanced reaction:
Fe + CuSO₄ ⇒ Cu + FeSO₄
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following quantities react and are produced:
Fe: 1 moleCuSO₄: 1 moleCu: 1 moleFeSO₄: 1 moleBeing:
Fe: 55.85 g/moleCu: 63.54 g/moleS: 32 g/moleO: 16 g/molethe molar mass of the compounds participating in the reaction is:
Fe: 55.85 g/moleCuSO₄: 63.54 g/mole + 32 g/mole+ 4* 16 g/mole= 159.54 g/moleCu: 63.54 g/moleFeSO₄: 55.85 g/mole + 32 g/mole+ 4* 16 g/mole= 151.85 g/moleThen, by stoichiometry of the reaction, the amounts of reagent and product that participate in the reaction are:
Fe: 1 mole*55.85 g/mole= 55.85 gCuSO₄: 1 mole* 159.54 g/mole= 159.54 gCu: 1mole* 63.54 g/mole= 63.54 gFeSO₄: 1 mole* 151.85 g/mole= 151.85 gThen you can apply a rule of three as follows: if 55.85 grams of Fe produces 63.54 grams of Cu, 0.75 grams of Fe how much mass of Cu does it produce?
[tex]mass of Cu=\frac{0.75 grams of Fe*63.54 grams of Cu}{55.85 grams of Fe}[/tex]
mass of Cu= 0.85 grams
If 0.75 grams of iron (Fe) react, 0.85 grams of copper (Cu) will be produced.
When solutions of hydrochloric acid and sodium hydroxide are mixed, a chemical reaction occurs forming aqueous sodium chloride and water. What would you expect to observe if you ran the reaction in the laboratory
Answer:
a change in temperature would be observed(ΔH is -ve)
Explanation:
Hydrochloric acid react with sodium hydroxide to give salt(sodium chloride) and water
HCl(aq) + NaOH(aq) =====> NaCl(aq) + H2O(l)
There would be no notable change since sodium chloride dissolved in water but there would be a change in temperature.
Since neutralization is exothermic(heat is evolved), therefore ΔH is negative
A 25.0-mL sample of 0.150 M hydrazoic acid, HN3, is titrated with a 0.150 M NaOH solution. What is the pH after 13.3 mL of base is added? The Ka of hydrazoic acid = 1.9 x 10-5.
Answer:
pH ≅ 4.80
Explanation:
Given that:
the volume of HN₃ = 25 mL = 0.025 L
Molarity of HN₃ = 0.150 M
number of moles of HN₃ = 0.025 × 0.150
number of moles of HN₃ = 0.00375 mol
Molarity of NaOH = 0.150 M
the volume of NaOH = 13.3 mL = 0.0133
number of moles of NaOH = 0.0133× 0.150
number of moles of NaOH = 0.001995 mol
The chemical equation for the reaction of this process can be written as:
[tex]HN_3 + OH- ---> N^-_{3} + H_2O[/tex]
1 mole of hydrazoic acid react with 1 mole of hydroxide to give nitride ion and water
thus the new number of moles of HN₃ = 0.00375 - 0.001995 = 0.001755 mol
Total volume used in the reaction = 0.025 + 0.0133 = 0.0383 L
Concentration of [tex]HN_3[/tex] = [tex]\dfrac{0.001755}{0.0383}[/tex] = 0.0458 M
Concentration of [tex]N^{-}_3[/tex] = [tex]\dfrac{ 0.001995 }{0.0383}[/tex] = 0.0521 M
GIven that :
Ka = [tex]1.9 x 10^{-5}[/tex]
Thus; it's pKa = 4.72
[tex]pH =4.72 + log(\dfrac{ \ 0.0521}{0.0458})[/tex]
[tex]pH =4.72 + log(1.1376)[/tex]
[tex]pH =4.72 + 0.05598[/tex]
[tex]pH =4.77598[/tex]
pH ≅ 4.80
The pH of the solution 0.150 M hydrazoic acid after 13.3 mL of NaOH base is added is 4.80.
How we calculate the pH?pH of the given solution will be used by using the following equation:
pH = pKa + log[conjugate base] / [weak acid]
Given chemical reaction will be represented as:
HN₃ + OH⁻ → N₃⁻ + H₂O
Moles will be calculated as:
n = M×V, where
M = molarity
V = volume
Moles of 0.150 M hydrazoic acid = (0.150M)(0.025L) = 0.00375 mol
Moles of 0.150 M NaOH = (0.0133)(0.150) = 0.001995 mol
From the above calculation it is clear that moles of hydrazoic acid is present in excess and it will be:
0.00375 - 0.001995 = 0.001755 mol
And 0.001995 mol of N₃⁻ is preduced by the reaction.
Total volume of the solution = 0.025 + 0.0133 = 0.0383 L
To calculate the pH after titration, first we have to calculate the concentration in terms of molarity of N₃⁻ and HN₃ as:
[N₃⁻] = 0.001995 mol / 0.0383 L = 0.0521 M
[HN₃] = 0.001755 mol / 0.0383 L = 0.0458 M
Ka for HN₃ = 1.9 × 10⁻⁵
pKa = -log( 1.9 × 10⁻⁵ ) = 4.72
On putting all these values on the above equation, we get
pH = 4.72 + log (0.0521) / (0.0458)
pH = 4.80
Hence, pH of the solution is 4.80.
To know more about pH, visit the below link:
https://brainly.com/question/10313314
Select the oxidation reduction reactions??
Answer:
Explanation:
1 ) Cl₂ + ZnBr₂ = ZnCl₂ + Br₂
In this reaction , oxidation number of Cl decreases from 0 to -1 so it is reduced and oxidation number of Br increases from -1 to 0 so it is oxidised . Hence this reaction is oxidation - reduction reaction .
2 )
Pb( ClO₄)₂ + 2KI = PbI₂ + 2KClO₄
In this reaction oxidation number of none is changing so it is not an oxidation - reduction reaction.
3 )
CaCO₃ = CaO + CO₂
In this reaction also oxidation number of none is changing so it is not an oxidation - reduction reaction.
So only first reaction is oxidation - reduction reaction.
2nd option is correct.
Write a net ionic equation to show that benzoic acid, C6H5COOH, behaves as a Brønsted-Lowry acid in water.
Answer:
H⁺(aq) + H₂O(l) ⇄ H₃O⁺(aq)
Explanation:
According to Brönsted-Lowry acid-base theory, an acid is a substance that donates H⁺. Let's consider the molecular equation showing that benzoic acid is a Brönsted-Lowry acid.
C₆H₅COOH(aq) + H₂O(l) ⇄ C₆H₅COO⁻(aq) + H₃O⁺(aq)
The complete ionic equation includes all the ions and molecular species.
C₆H₅COO⁻(aq) + H⁺(aq) + H₂O(l) ⇄ C₆H₅COO⁻(aq) + H₃O⁺(aq)
The net ionic equation includes only the ions that participate in the reaction and the molecular species.
H⁺(aq) + H₂O(l) ⇄ H₃O⁺(aq)
For the reaction, 2SO2(g) + O2(g) <--> 2SO3(g), at 450.0 K the equilibrium constant, Kc, has a value of 4.62. A system was charged to give these initial concentrations, [SO3] = 0.254 M, [O2] = 0.00855 M, [SO2] = 0.500 M. In which direction will it go?
Answer:
To the left.
Explanation:
Step 1: Write the balanced reaction at equilibrium
2 SO₂(g) + O₂(g) ⇄ 2 SO₃(g)
Step 2: Calculate the reaction quotient (Qc)
Qc = [SO₃]² / [SO₂]² × [O₂]
Qc = 0.254² / 0.500² × 0.00855
Qc = 30.2
Step 3: Determine in which direction will proceed the system
Since Qc > Kc, the system will shift to the left to attain the equilibrium.
2) Which type movement do pivot joints allow?
Identify the correct structure of 5-bromo-4-isopropylheptanoic acid.
Answer:
See attached picture.
Explanation:
Hello,
In this case, given the IUPAC name, we can infer we have a seven-carbon carboxylic acid that has a bromine at the fifth carbon, an isopropyl at the fourth carbon and the carboxyl functional group (COOH) at the first carbon, thus, on the attached document, you will find the correct structure.
Best regards.
which process is used to produce gases from solutions of salts dissolved in water or another liquid?
A.Electrolysis
B.Metallic bonding
C.Ionic bonding
D. Polar covalent bonding
Answer:
A.Electrolysis
Explanation:
A.Electrolysis
For example, electrolysis of solution of NaCl in water gives H2 and O2.
A critical reaction in the production of energy to do work or drive chemical reactions in biological systems is the hydrolysis of adenosine triphosphate, ATP, to adenosine diphosphate, ADP, as described by the reactionATP(aq)+ H2O(l) → ADP(aq)+ HPO4^-2 (aq)for which ΔGrxn = -30.5 kj/mol at 37.0C and pH 7.0. Required:a. Calculate the value of ΔGrxn in a biological cell in which [ATP] = 5.0 mM, [ADP] = 0.30 mM, and HPO4^-2= 5.0mMb. Is the hydrolysis of ATP spontaneous under these conditions?
Answer:
Δ [tex]G_{rxn}[/tex] = −51. 4 kJ/mol
However, since Δ [tex]G_{rxn}[/tex] is negative. The hydrolysis of ATP for this reaction is said to be spontaneous
Explanation:
From the question; The equation for this reaction can be represented as :
[tex]ATP_{(aq)} + H_2O_{(l)} \to ADP_{(aq)}+ HPO_4^{2-}} _{(aq)}[/tex]
where:
[tex]\Delta G ^0 _{rxn} =[/tex]-30.5 kJ/mol
= -30.5 kJ/mol × 1000 J/ 1 kJ
= -30.5 × 10 ⁻³ J/mol
Temperature T = 37 ° C
= (37+273)
= 310 K
pH = 7.0
[ATP] = 5.0 mM
= 5.0mM × 1M/1000mM
= 0.005 M
[ADP] = 0.30 mM
= 0.30 mM × 1M/1000mM
= 0.0003 M
[tex][HPO_4^{2-}}][/tex] = 5.0 mM
= 5.0mM × 1M/1000mM
= 0.005 M
The objective is to calculate the value for Δ [tex]G_{rxn}[/tex] in the biological cell and to determine if the hydrolysis of ATP is spontaneous under these conditions.
Now;
From the equation given; the equilibrium constant [tex]K_{eq}[/tex] can be expressed as:
[tex]K_{eq} = \dfrac{[ADP][ HPO_4^{2-}]} {[ATP]}[/tex]
[tex]K_{eq} = \dfrac{(0.0003 \ M)(0.005 \ M)} {(0.005 \ M)}[/tex]
[tex]K_{eq} = 3*10^{-4}[/tex]
The Δ [tex]G_{rxn}[/tex] in the biological cell can now be calculated as:
Δ [tex]G_{rxn}[/tex] = [tex](-30.5 * 10 ^3 \ J/mol) + (8.314 \ J/mol.K)(310 K ) In ( 3*10^{-4})[/tex]
Δ [tex]G_{rxn}[/tex] = [tex](-30.5 * 10 ^3 \ J/mol) + (-20906.68126)[/tex]
Δ [tex]G_{rxn}[/tex] = −51406.68 J/mol
Δ [tex]G_{rxn}[/tex] = −51. 4 × 10³ J/mol
Δ [tex]G_{rxn}[/tex] = −51. 4 kJ/mol
Thus since Δ [tex]G_{rxn}[/tex] is negative. The hydrolysis for this reaction is said to be spontaneous
Enter an equation for the formation of CaCO3(s) from its elements in their standard states. Enter any reference to carbon as C(s). Express your answer as a chemical equation. Identify all of the phases in your answer.
Answer:
CaF2 + CO3- ----> CaCO3 + 2 F-
Explanation:
The chemical compounds found on the left side of the date are the reagents and those found on the right are the products, where calcium carbonate appears.
Calcium carbonate is a quaternary salt
The constant pressure molar heat capacity of argon, C_{p,m}C
p,m
, is
20.79\text{ J K}^{-1}\text{ mol}^{-1}20.79 J K
−1
mol
−1
at 298\text{ K}298 K. What
will be the value of the constant volume molar heat capacity of argon,
C_{V,m}C
V,m
, at this temperature?
Answer:
Constant-volume molar heat capacity of argon is 12.47 J K ⁻¹mol⁻¹
Explanation:
Argon is a monoatomic gas that behaves as an ideal gas at 298K.
Using the first law of thermodinamics you can obtain:
Work, Q, for constant pressure molar heat capacity,CP:
CP = (5/2)R
For constant-volume molar heat capacity,CV:
CV = (3/2)R
That means:
2CP/5 = 2CV/3
3/5 = CV / CP
As CP of Argon is 20.79 J K ⁻¹mol⁻¹, CV will be:
3/5 = CV / CP
3/5 = CV / 20.79 J K ⁻¹mol⁻¹
12.47 J K ⁻¹mol⁻¹ = CV
Constant-volume molar heat capacity of argon is 12.47 J K ⁻¹mol⁻¹Do you think you could go a week without causing any chemical reactions?
yes yes yes yes
yes
yes
yes
yes
yes
A(n) _____ reaction occurs when an acid and a base are present in the same solution.
Answer:
The answer is Neutralization reaction
It occurs when an acid and a base are present in the same solution and react to form salt and water only
Hope this helps you
Which best describes the relationship between heat internal energy, and thermal energy?
O Internal energy is heat that flows, and heat is the part of thermal energy that can be transferred.
O Internal energy is thermal energy that flows, and thermal energy is the part of heat that can be transferred.
O Thermal energy is heat that flows, and heat is the part of internal energy that can be transferred.
O Heat is thermal energy that flows, and thermal energy is the part of internal energy that can be transferred.
Answer:
Heat is thermal energy that flows, and thermal energy is the part of internal energy that can be transferred
Explanation:
a piece of copper weighing 850 grams is placed in a cup with 450 ml of water at 21 C and the Cp of the cup is 47 J/K, how many grams of gasoline would it take to heat the entire system to 110 C?
Answer:
4.2g of gasoline
Explanation:
In the problem, you need to give energy to the cup from the combustion of gasoline. The energy you need to give is:
Qcup + QWater + QCopper
As you need to increase (110ºC - 21ºC = 89º = Increase 89K) 89K, the Qcup is:
Qcup = 89K × (47J/K) = 4183J.
You can find Qwater using its specific heat, C (4.18Jg⁻¹K⁻¹), its mass (450mL = 450g) and the change of temperature, 89K:
QWater = CₓmₓΔT
QWater = 4.184Jg⁻¹K⁻¹ ₓ 450g×89K
QWater = 167569J
And Q of Copper, QCu, could be obtained in the same way (Specific heat Cu: 0.387 J/g⁻¹K⁻¹:
QCu = CₓmₓΔT
QCu = 0.387 J/g⁻¹K⁻¹ₓ850gₓ89K
QCu = 29277J
Thus, total heat you need is:
Q = Qcup + QWater + QCopper
Q = 4183J + 167569J + 29277J
Q = 201029J = 201kJ
The combustion of gasoline (Octane) produce 47.8kJ/g (Its heat of combustion). that means to produce 201kJ of energy you require:
201kJ × (1g / 47.8kJ) =
4.2g of octane = Gasoline you requireA beach has a supply of sand grains composed of calcite, ferromagnesian silicate minerals, and non-ferromagnesian silicate minerals. If it undergoes lots of chemical weathering, which sand grains will be quickly chemically weathered away?
a. Calcite
b. ferromagnesian silicate minerals
c. non-ferromagnesian silicate minerals
The sand that grained will be quickly chemically weathered away should be option b. ferromagnesian silicate minerals.
What are ferromagnesian silicate minerals?It should be considered as the Silicate minerals where cations of iron and the form of magnesium should be important for the chemical components. It is used for covering up the minerals. Also, calcite should be normal weather via the solution process so it required a lot of water that contains a high amount of carbonic acid.
Hence, the correct option is b.
Learn more about mineral here: https://brainly.com/question/20772787
What is the main side reaction that competes with elimination when a primary alkyl halide is treated with alcoholic potassium hydroxide, and why does this reaction compete with elimination of a primary alkyl halide but not a tertiary alkyl halide
Answer:
The main competing reaction when a primary alkyl halide is treated with alcoholic potassium hydroxide is SN2 substitution.
Explanation:
The relative percentage of products of the reaction between an alkyl halide and alcoholic potassium hydroxide generally depends on the structure of the primary alkylhalide. The attacking nucleophile/base in this reaction is the alkoxide ion. Substitution by SN2 mechanism is a major competing reaction in the elimination reaction intended.
A more branched alkyl halide will yield an alkene product due to steric hindrance, similarly, a good nucleophile such as the alkoxide ion may favour SN2 substitution over the intended elimination (E2) reaction.
Both SN2 and E2 are concerted reaction mechanisms. They do not depend on the formation of a carbocation intermediate. Primary alkyl halides generally experience less steric hindrance in the transition state and do not form stable carbocations hence they cannot undergo E1 or SN1 reactions.
SN2 substitution cannot occur in a tertiary alkyl halides because the stability of tertiary carbocations favours the formation of a carbocation intermediate. The formation of this carbocation intermediate will lead to an SN1 or E1 mechanism. SN2 reactions is never observed for a tertiary alkyl halide due to steric crowding of the transition state. Also, with strong bases such as the alkoxide ion, elimination becomes the main reaction of tertiary alkyl halides.
Write the name for the following molecular compounds. Remember to use the correct prefix for each compound.
a. CS2
b. PBr3
c. NO
d. CF4
e. P2O5
Answer:
Hey there!
CS2) Carbon Disulfide.
PBr3) Phosphorus Tribromide
NO) Nitric Oxide
CF4) Carbon Tetrafluoride
P2O5) Phosphorus Pentoxide
Let me know if this helps :)
Draw the structure 2 butylbutane
Answer:
please look at the picture below.
Explanation:
Which short-term environmental change would a very small asteroid or comet impact on Earth most likely cause? flooding extinction surface craters weather pattern changes
The correct answer is C. Surface craters
Explanation:
Short-term environmental changes involve temporary changes and effects in the ecosystem, which are mainly minor. In the case of a small asteroid or comet, this will likely lead to surface craters or changes in the surface of the impact zone. This is because the craters and asteroids impact the surface at hight speed. Also, because this is a minor event it might lead to the death of some organisms but not the extinction of these and it is not expected this has major effects such as changes in weather. Thus, the short-term effect that this will most likely cause is "surface craters."
Answer:
surface
Explanation: