Chemistry High School

What is the name of this hydrocarbon?

What Is The Name Of This Hydrocarbon?

Answers

Answer 1

Answer:In the given molecule the methyl group is attached at the second carbon atom of the parent chain. Therefore the name of hydrocarbon is 2-methylbutane.

Explanation:

Related Questions


How does the human body build the complex
molecules it needs?

Answers

Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case

Answer:

Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case.

Explanation:

Why is the distance traveled between seconds 0 and 1 less than the distance traveled between 2 and 3 sceonds

Answers

The object is accelerating

Answer:

The ball speeds up

Explanation:

Please Help I need to finish this by the end of the day!

Answers

Answer:

C

Explanation:

If I am not mistaken, due to the conservation of mass, whatever mass is on the side of the reactants should be the same for the product side.

This means

218.76g+53.96g = 272.72g

272.72g-266.66g = 6.06g

So the answer should be C

Give the noble gas configuration of vanadium (V), atomic number 23

Answers

The noble gas configuration of vanadium (V), atomic number 23 will be [Ar] 3d34s2.

What is noble gas configuration ?

The electron configuration of noble gases would be known as that of the noble gas configuration. The propensity of chemical elements to gain stability forms the foundation of all chemical reactions. Chemical formation frequently leads to an entire electronic configuration approximating a noble gas for several main group elements.

The atomic number of V = 23

The noble gas configuration = [Ar] [tex]3d^{3} 4s^{2}[/tex].

To know more about noble gas configuration

https://brainly.com/question/13933772

#SPJ3

Answer:

[Ar] 3d3 4s2

Explanation:

[Ar] 3d3 4s2

I need help with the question below:

[tex]PCl_5 = PCl_3+Cl_2 \\ [/tex]
Where PCl5 and PCl3 are gasses

In the above equation , Predict the effect of change in :
I. Temperature
ii. Pressure
iii. Removal of Chlorine​

Answers

Answer:

1: As the temperature rises, the equilibrium moves towards the products

2: The higher the pressure, the higher the equilibrium goes to the reactants

3: By removing chlorine, the equilibrium moves towards the products

True or False. Chemical changes only rearrange the elements that are
already present.

True or False. The reactants and the products of a chemical equation
always have the same number of atoms.

Answers

Here's link to the answer:

tinyurl.com/wpazsebu

Can i titrate a solution of unknown concentration with another solution of unknown concentration and still get a meaningful answer

Answers

Answer:

No, I don't think so at least

Explanation:

In chemistry, you do calculations to find the concentration of a solution with another solution of KNOWN concentration. Without concentrations of either solution, were would you get values from? Where would you start? :3

You can not titrate  a solution of unknown concentration with another solution of unknown concentration and still get a meaningful answer.

Titration involves the standardization of unknown solution using a standard solution. By this definition, titration must involve a standard solution.

Since the two unknown solutions are not standardized, we can never get a meaningful answer because we can not be able to perform any calculation unless we have a standard solution.

Learn more: https://brainly.com/question/2728613

Help!!!
Is KOH soluble or insoluble in water?
Insoluble
Soluble

Answers

Answer: yes, it's soluble in water.

Directions: Show all of your work for each of the following problems.

3. What is the % Ba in Ba(NO3)2?














4. What is the % of each element in Ni3(PO4)2?
















5. What is the % of each element in Al2(CrO4)3?















6. What is the % of each element in (NH4)2(SO4)?


Answers

Answer:

3.Ba=24.Ni=2...PO4=35.Al=3...CrO4=26.NH4=1...SO4=2

In a closed system for the reaction: A (g) + 2B (g) → AB₂ (g) The rate of the reaction increases when there is
A) an increase in pressure
B) an increase in the reaction vessel
C) a decrease in the concentration of A
D) an increase in surface area of A

Answers

Answer: D

Explanation: an increase in surface area of A

Radioactive decay occurs when the ____ decays

Answers

Answer:

nucleus i think

Explanation:

Which of the following is an example of kinetic energy?

Answers

Answer: A river flowing at a certain speed

Explanation: as water has certain velocity and mass.

Someone help please! Extra points & brainlest!

Answers

Answer:

golgi apparatus

Explanation:

Answer:

vacuole

Explanation:

the answer is vacuole im pretty sure!

How many grams of 5% barium hydroxide solution will be needed to react 2 moles of sulfur (IV) oxide?​

Answers

Answer:

DONT PRESS THAT LINK IT IS VIRUS AND HACK

Explanation:

Select the compound that is soluble in water?

Answers

Answer:

NaOH

Explanation:

NaOH is among the water soluble bases

Consider this reaction: NH4+ + HPO42− → NH3 + H2PO4−

Which is the conjugate base?

NH4+

NH3

HPO42–

H2PO4–

Answers

The NH3, as it was the acid in the beginning and donated a proton to become more basic.

The conjugate base is formed when an acid loses its hydrogen or proton. In the reaction between ammonium ion and hydrogen phosphate, HPO₄²⁻ is the conjugate base. Thus, option C is correct.

What is a conjugate base?

Conjugate bases are formed when the substance accepts or absorbs the proton or the hydrogen ion from the acids in the solution. It can be said as a base with an added hydrogen ion to it.

The chemical reaction of the acids and the bases has been shown as,

NH₄⁺ + HPO₄²⁻ → NH₃⁺ +  H₂PO₄⁻

From the reaction, it can be said that ammonia donated its proton, whereas HPO₄²⁻ accepted hydrogen ions from the acid.

Therefore, HPO₄²⁻ has been the conjugate base in the given chemical reaction.

Learn more about conjugate base here:

https://brainly.com/question/12883745

#SPJ5

the action force
According to Newton's third law of motion, a reaction force between two objects is
but in the opposite direction.
equal to
greater than
less than

Answers

Answer:

equal to - it's opposite but equal energy is the third law

Can someone plz help me with this one problem plz!!!

Answers

Answer:

I think it is C

Explanation:

I just do.

type a question about gas starting with “what if”

Answers

Answer:

what if we didn't have gas

Explanation:

PLEASE HELP ILL MARK BRAINLIEST

Answers

Answer:

1. true

2. existing matter

3. the materials simply turn into gases you cannot see

hope that helps! ☺

plz mark Brainliest!

briskly meaning

thankew 人(◕ᴗ◕✿)❤️

to all who liked my answers

plsssssssssss flw

can anyone pls flw me who aren't flwing​
plsssssssssss answer fast

Answers

Answer:

You need follower?

See it shows this in Laptop

I can't see who I am following it does itself

How do we follow people?

hydrogen + copper(II) oxide= copper + steam, which substance is oxidized. explain your answers

Answers

Hydrogen is oxidized. The H2 reactant has an oxidation number of 0 because it’s in its elemental form. In the H2O product, H has an oxidation number of +1. The increase in oxidation number is oxidation.

What does it mean to be limiting or excess? (Limiting Reactant)

Answers

Answer:

Find the limiting reagent by calculating and comparing the amount of product each reactant will produce. Balance the chemical equation for the chemical reaction. The reactant that produces a lesser amount of product is the limiting reagent. The reactant that produces a larger amount of product is the excess reagent.

Explanation:

In dry climates, people often dig wells to find additional sources of water
to raise crops or feed livestock. Which of the following could be
significant negative effect on the environment cause by obtaining water
from the well?
Select one:

A: The digging will create air pockets in the soil.

B: Using the well could erode the soil and increased the risk for mountain
landslides.

C: Crushed rock and layers of soil might pile up where the well is dug

D: Using the well could lower the water table throughout the area.

Answers

Answer:

D i think, sorry if its wrong

Explanation:

Answer:

Using the well could lower the water table throughout the area.

Explanation:

i just took a test and this was the answer

Briefly describe each of the suns layers. I’ll give brainless

Answers

Answer:  The inner layers are the Core, Radiative Zone and Convection Zone.

The outer layers are the Photosphere, the Chromosphere, the Transition Region and the Corona.

Nuclear fusion of hydrogen in the core of the Sun produces tremendous amounts of energy that radiate out from the Sun.

The corona is the outermost layer of the Sun, starting at about 1300 miles (2100 km) above the solar surface (the photosphere). The temperature in the corona is 500,000 K (900,000 degrees F, 500,000 degrees C) or more.

The chromosphere is a layer in the Sun between about 250 miles (400 km) and 1300 miles (2100 km) above the solar surface (the photosphere). The temperature in the chromosphere varies between about 4000 K at the bottom (the so-called temperature minimum) and 8000 K at the top (6700 and 14,000 degrees F, 3700 and 7700 degrees C), so in this layer (and higher layers) it actually gets hotter if you go further away from the Sun, unlike in the lower layers, where it gets hotter if you go closer to the center of the Sun.

The photosphere is the deepest layer of the Sun that we can observe directly. It reaches from the surface visible at the center of the solar disk to about 250 miles (400 km) above that. The temperature in the photosphere varies between about 6500 K at the bottom and 4000 K at the top (11,000 and 6700 degrees F, 6200 and 3700 degrees C)

(phew! There you go!)

(-15)+(-12)+14

how do u simplify ​

Answers

Answer:

-15-12-14=-13

Explanation:

we simplify by opening the bracket

can someone answer this

Answers

Answer:

choice B

58Fe^2+

Explanation:

hope this helped

How many moles of sulfuric acid (H2SO4) are present in 500.0 mL of 0.15 M H2SO4 solution?

Answers

Answer:

Number of moles = 0.075 mol

Explanation:

Volume = 500.0 mL = 0.5 (Converting to L by dividing by 1000)

Molarity = 0.15 M

Number of moles = ?

The relationship between the quantities is given as;

Molarity  = Number of moles / Volume

Number of moles = Molarity * Volume

Number of moles = 0.15  * 0.5

Number of moles = 0.075 mol

For the balanced equation shown below, how many moles of H2O will react with 9 moles of N2?
N2 + 4H2O --> 2H2O2 + N2H4

Answers

Answer:

36 mole of H20

Explanation:

N2 + 4H2O --> 2H2O2 + N2H4

H20        :       N2

4             :        1

x             :        9

cross multiplication

so,

= 9x4/1 = 36 mole of H20

I hope this helps a little bit.

How much energy is released when 67.04g of phosphorous is reacted with 10.20g of chlorine? ___ P + ___ Cl2 ___ PCl3 ΔH = -574 kJ

Answers

Answer:

26.78 kJ

Explanation:

To solve the problem, we have to first write the stoichiometric coefficients in the chemical equation:

2P + 3Cl₂ → 2PCl₃

With these coefficients, we have the same number of atoms of each chemical element on both sides: 2 atoms of P, 6 atoms of Cl.

According to the equation, 2 moles of phosphorous (P) react with 3 moles of chlorine (Cl₂), and 574 kJ of energy are released. We have to figure out which is the limiting reactant. For this, we convert the mass into moles by using the molar mass(MM):

MM(P) = 30.9 g/mol

67.04 g P/(30.9 g/mol) = 2.17 mol P

MM(Cl₂) = 35.4 g/mol x 2 = 70.8 g/mol

10.20 g Cl₂/(70.8 g/mol) = 0.14 mol Cl₂

Now, we multiply the actual moles of P (the amount we have for the reaction) by the stoichiometric ratio given by the chemical equation (3 mol Cl₂/2 mol P):

2.17 mol P x (3 mol Cl₂/2 mol P) = 3.25 mol Cl₂

To completely react 67.04 g P, we need 3.25 mol of Cl₂, and we have only 0.14 moles of Cl₂, so the limiting reactant is Cl₂.

Now, we use the limiting reactant to calculate the energy released from the reaction. The energy released per mole of Cl₂ is:

ΔH/(3 mol Cl₂) = -574 kJ/3 mol Cl₂= 191.3 kJ/mol Cl₂

Finally, we multiply the energy released per mole of Cl₂ by the number of moles of Cl₂ we have:

0.14 mol Cl₂ x 191.3 kJ/mol Cl₂ = 26.78 kJ

Other Questions
EASY POINTS! BRAINLIEST There are 5 moles of N20 at STP. What is the density? Pls answer quick. Lol An object is accelerated by a net force in which direction? A. at an angle to the forceB. in the direction of the forceC. in the direction opposite to the forceD. Any of these is possible. First one to answer gets BRAINLIEST no cap look at the picture. Sally is at the park standing directly under a kite which is 20 feet overheadSally's dad is flying the kitc and is standing 15 feet from her If both are on level ground, how long is the kite string in feet? % 22 si 66 olan saynn % 30 u katr?ltfen kat zerinde yapn :-) See the lseek_example.c file. Modify the lseek_example.c, such that it reads from an input file (named "start.txt") and will print to an output file (named "end.txt") every (1+3*i)th character, starting from the 1st character in the input file. In other words, it will print the 1st character, then skip 2 characters and print the 4th one, then skip 2 characters and print the 7th one, and so on.For instance, for input file:ABCDEFGHIJKLMIt will output:ADGJMIseek_example.c file contant:// C program to read nth byte of a file and// copy it to another file using lseek#include #include #include #include void func(char arr[], int n){// Open the file for READ only.int f_read = open("start.txt", O_RDONLY);// Open the file for WRITE and READ only.int f_write = open("end.txt", O_WRONLY);int count = 0;while (read(f_read, arr, 1)){// to write the 1st byte of the input file in// the output fileif (count < n){// SEEK_CUR specifies that// the offset provided is relative to the// current file positionlseek (f_read, n, SEEK_CUR);write (f_write, arr, 1);count = n;}// After the nth byte (now taking the alternate// nth byte)else{count = (2*n);lseek(f_read, count, SEEK_CUR);write(f_write, arr, 1);}}close(f_write);close(f_read);}// Driver codeint main(){char arr[100];int n;n = 5;// Calling for the functionfunc(arr, n);return 0;} Any body helpppppp in my history homework plzzz iam stuck Select one of these topics, and imagine a conversation in which someone tries to make a point using a form of fallacious reasoning. Write the conversation as you imagine it, focusing on the error in logic. It will be on the The value of reading vs. Watching television What is 1,987 rounded to the nearest thousand? Determine the values of the variables in the parallelogram below.5(m2 - 4m)140x + 4x does anyone have all the answers to the 8th grade math DRC interim for vermillion parish. bc I'm here stuck pls help. session 1 Pei is an operating room nurse in charge of preparing the sterile field. Onceshe has prepared the sterile field, which of the following is acceptable for Peito do in order to protect it?A. Pei bends down to pick up an instrument that fell on the floor,removes the instrument from the operating room, and returns tothe sterile field.B. Pei leans against the wall of the operating room in order to take abreak, and then she returns to the sterile field.C. Pei leaves the operating room until the procedure begins to keepany remaining pathogens on her from contaminating the sterilefield.D. Pei stays in the operating room before the procedure begins toensure the sterile field is not left unattended. Help me please Ill give brainliest answer A uniform-density 7 kg disk of radius 0.20 m is mounted on a nearly frictionless axle. Initially it is not spinning. A string is wrapped tightly around the disk, and you pull on the string with a constant force of 42 N through a distance of 0.9 m. Now what is the angular speed HELP PLS MIGHT GIVE BRAINLIST BUT ONLY IF 2 PEOPLE ANSWER! Which phrase best completes this list? A. Lower prices on goods B. Fewer goods available for purchase C. Fewer job opportunities for women D. Greater value placed on handmade goods Yea I suck at German can someone who actually knows the answer help. Ill give brainlyest :) WILL MARK BRAINLIEST PLEASE HELP ASAP!!!!!