Help me please I’ll give brainliest answer

Answer:

chlorate changes to chlorous acid

Answer: B

Explanation: sorry if I'm too late but i just did this question and that was the right answer

Answer:

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Explanation:

An electron has an acceleration of 2.33*10² [tex]\frac{m}{sec^{2} }[/tex]

To be able to express in units [tex]\frac{m}{min^{2} }[/tex], you must carry out the conversion taking into account that 1 [tex]\frac{m}{sec^{2} }[/tex]= 3600 [tex]\frac{m}{min^{2} }[/tex]. Then you can apply the following rule of three: if 1 [tex]\frac{m}{sec^{2} }[/tex] equals 3600 [tex]\frac{m}{min^{2} }[/tex], 2.33 * 10² [tex]\frac{m}{sec^{2} }[/tex] equals how much [tex]\frac{m}{min^{2} }[/tex]?

[tex]\frac{m}{min^{2} }=\frac{2.33*10^{2} \frac{m}{sec^{2} }*3600\frac{m}{min^{2} }}{1\frac{m}{sec^{2} }}[/tex]

[tex]\frac{m}{min^{2} }=838800[/tex]

The electron has an acceleration of 838800 [tex]\frac{m}{min^{2} }[/tex]

Answer:

a) distance is 4+7+1+8=20 blocks

b) displacement is 10 blocks

Explanation:

find displacement: x and y

x axis displacement = 4-1 = 3 blocks

y axis displacement = -7+8= 1 block

displacement = the square root of 3^2 + 1^2

= 9+1 = 10 blocks.

You can find the angle of displacement with respect to the initial position using trig identities, if you wish.

Answer:

HCI - BASE

KOH - ACID

H2SO4 - ACID

H30 + :- BASE

NAOH - ACID

Answer:

jjjjajwhejwhswjiwiwvssvwvow9qiwgdvdbslw

Answer:

it is less dense than oxygen gas.

Explanation:

Hydrogen is the simplest chemical element that exists. The symbol for the chemical element Hydrogen is "H" and it is a colourless, tasteless, odorless, and highly flammable gas.

Hydrogen is a chemical element found in group (1) of the periodic table and as such it has one (1) electrons in its outermost shell. Therefore, Hydrogen has an atomic number of one (1) and a single valence electrons because it has only one proton and one electron in its nucleus.

In Chemistry, the properties of a chemical element that can be observed and measured without changing its chemical nature is known as a physical property. It includes density, color, freezing point, opacity, smell, melting point, viscosity, etc.

Hence, the statement which describes a physical property of hydrogen is that it is less dense (density) than oxygen gas.

Answer:

due to the law of conservation of mass, the mass would stay the same.

Answer:

There are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Explanation:

One mole of a substance contains 6.02 × 10²³ particles

One mole of sulphur atom contains 6.02 × 10²³ atoms

Number of moles of sulphur present in 3.0 × 10²¹ atoms = 3.0 ×10²¹/6.02 10²³

Number of moles of sulphur atom = 0.00498 moles of sulphur atom

The mole of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.

Molar mass of sulphur atom = 32 grams per mole (g/mol)

Mass of 0.00498 moles of sulphur atom = 0.00498 moles × 32 g/mol

Mass of sulphur = 0.16 g

Therefore, there are 0.16 g of sulphur in 3.0 × 10²¹ atoms.

Answer and Explanation:

Dipole-Dipole interactions are weaker than hydrogen bonds.

Hydrogen bonds are a form of dipole-dipole interactions, being the strongest form of dipole-dipole interactions.

#teamtrees #PAW (Plant And Water)

Answer:

1.3142 mol CoCl2

Explanation:

Well, to answer this we need to find out how many grams are in a single mole of CoCl2. Two find that we need to get the molar mass of CoCl2

Co = 28.0101 g Co per mole

Cl = 35.453 * g Cl per mole

28.0101 + 2 * 35.453 = 98.9161 g CoCl2 per mole

Now, we divide:

130/98.9161 = 1.3142 mol CoCl2

There are 1.31 moles in 130grams of cobalt chloride (CoCl2). Details about how to convert mass to moles can be found below.

The number of moles of a substance can be calculated by dividing the mass of the substance by its molar mass.

According to this question, there are 130g of CoCl2.

molar mass of CoCl2 = 28 + 35.5(2) = 99g/mol

moles = 130g ÷ 99g/mol

moles = 1.31 moles

Therefore, there are 1.31 moles in 130grams of cobalt chloride (CoCl2).

Learn more about number of moles at: https://brainly.com/question/14919968

Answer:

Minerals can form in three primary ways being precipitation, crystallization from a magma and solid- state transformation by chemical reactions (metamorphism). Mineral Precipitation is when a mineral is formed by crystallization from a solution. Examples include quartz, halite (table salt), calcite, and gypsum.

Answer:

When magma cools slowly, deep below the surface, it has time to form large crystals in regular patterns. The second way that minerals form is through solutions. (A solution is when one substance is dissolved uniformly in a liquid.) When elements and compounds leave the solution, they can crystalize.

Answer:

cell wall and chloroplasts

Explanation:

Answer:

1.634 molL-1

Explanation:

The mol ration between NH3 and HCl is 1 : 1

Using Ca Va / Cb Vb = Na / Nb   where a = acid and b = base

Na = 1

Nb = 1

Ca = 0.208 molL-1

Cb = ?

Va = 19.64 mL

Vb = 25.00mL

Solving for Cb

Cb = Ca Va / Vb

Cb = 0.208 * 19.64 / 25.0

Cb = 0.1634 molL-1 (Concentration of diluted ammonia solution)

Using the dilution equation;

C1V1 = C2V2

Initial Concentration, C1 = ?

Initial Volume, V1 = 25.00 mL

Final Volume, V2 =  250 mL

Final Concentration, C2 = 0.1634 molL-1

Solving for C1;

C1 = C2 * V2 / V1

C1 = 0.1634 * 250 / 25.00

C1 = 1.634 molL-1

Answer:

Increased

Explanation:

We know that the higher the temperature the higher the rate of reaction. This implies that as the temperature is increased, a reaction tends to proceed faster.

This follows from the collision theory, the higher the temperature, the higher the energy of the reacting particles hence they collide with each other faster and more effectively.

Thus the rate of reaction( or reaction time) for the carton of milk on the counter was increased.

Answer:

The change of state that has occurred is from a gas to a liquid

Note: The question is incomplete. The complete question is given blow.

H₂O is initially present in a state where its molecules are far apart. During a change of state, its molecules slow down. Which change of state has most likely taken place?

from a gas to a liquid

from a liquid to a gas

from a solid to a liquid

from a gas to a plasma

Explanation:

Water can exists in three states: as gaseous water vapor, as liquid water, and as solid ice. Each of these states of water can be interconverted from one to another by the addition or removal of heat in a process known as change of state.

Liquid water can be converted to solid ice by the removal of heat, while solid ice ice can be converted to liquid water by the addition of heat. Also, liquid water can be converted to water vapor by the addition of heat, while water vapor can be converted to liquid water by the removal of heat.

Of the three states of water, the one in which the molecules are farthest apart is in the gaseous state. The molecules have high kinetic energy and move randomly while colliding with one another. When a heat is removed from these highly energetic molecules, the molecules slow down and lose some of their kinetic energy and a change of  occurs from gaseous to liquid state.

Therefore, the change of state that occurred as described, is from gas to liquid.

Answer:

1. B. Ammonia and hexane will not dissolve because one molecule is polar and the other is non polar.

2. 1400 mL

Explanation:

In chemistry, like dissolve like! Ammonia is a polar molecule having a significant dipole moment owing to its three N-H bonds. On the other hand, hexane is a purely non-polar hydrocarbon hence the two substances can never dissolve in each other.

From the dilution formula;

C1V1=C2V2

C1= Initial concentration of the solution

V1 = Initial volume of the solution

C2 = Final concentration of the solution

V2= Final volume of the solution

2.8 M * 750.0 mL = 1.5 M * V2

V2 = 2.8 M * 750.0 mL/1.5 M

V2 = 1400 mL

Answer: Hello, This is my most favorite class so I know this is right.

The most Reactive metal source is Copper.

Explanation:

This is the most reactive because it contains Lithium supplement.

Your Welcome! Mark me as Brainliest! :)

Answer:

thermal energy: the part of total internal energy that can be transferred (a portion of the kinetic energy)

heat is the thermal energy that flows from one substance to another due to a temperature difference.

Thermal energy is measured in temperature change.

Thermal energy transfer stops when thermal equilibrium is achieved (Both substances at the same temperature).

conduction: Transfer of thermal energy through a solid object like heat transferring up a metal spoon from a hot cup of coffee.

convection: the transfer of thermal energy due to the movement of a liquid or gas caused by differences in temperature. Only in a fluid (liquid or gas). Breezes, ocean currents.

radiation: Transfer energy with or without matter. Warming from the Sun, microwave oven.

Answer:

Conduction is the transfer of thermal energy through direct contact. Convection is the transfer of thermal energy through the movement of a liquid or gas. Radiation is the transfer of thermal energy through thermal emission. Hope this helps!

Explanation:

Answer:

Ridges.

Explanation:

Watersheds are separated from one another by ridges. Ridges are elevated boundaries that divide watersheds.

Answer:

honey

Coffee

blood

Explanation:

These components are uniformly distrubuted and these cannot be seperated unlike heterogeneous

Answer:

yes you do so you know how strong it is how maluble it's is so it can be customised to it's specific use

Answer:

alloy's properties are usually different from those of its component elements. Alloy constituents are usually measured by mass. Unlike pure metals, most alloys do not have a single melting point; rather, they have a melting range in which the substance is a mixture of solid and liquid.

Alloy steels have a wide range of special properties, such as hardness, toughness, corrosion resistance, magnetizability, and ductility. Nonferrous alloys, mainly copper–nickel, bronze, and aluminum alloys, are much used in coinage.

Pure metals are useful but their applications are often limited to each individual metal's properties. Alloys allow metal mixtures that have increased resistance to oxidation, increased strength, conductivity, and melting point; Essentially any property can be manipulated by adjusting alloy concentrations.

dnt learn all thr properties.

these are the main properties..u can learn thse only. hope it will help u

Answer:

The third one!

Answer:

-Warm air sinks, creating an area of low pressure.

Explanation:

Heat will weigh more, than cool air!

Answer:

Explanation:

It's 21 /

Answer: You are made of mostly 6 elements: Oxygen, Carbon, Hydrogen, Nitrogen, Calcium, and Phosphorus. Some of these elements combine to form compounds in your body.

Explanation:

Answer:

CaCO3 (s)

Explanation:

This equation is a double replacement equation, which means that since Na and Cl and paired, Ca and CO3 will be paired.

Then, you look at the charge of each element and balance

Ca has a 2+ charge

CO3 has a 2- charge

The 2+ charge and the 2- charge will cancel so there is no need for a  subscript or to balance the equation

The complete equation will be Na2CO3 (aq) + CaCl2(aq) -> NaCl (aq) + CaCO3 (s)

I hope this helps and have a great day!

Answer:

Ture

Explanation:

Ture

True

True

True