Answer:
[tex]\boxed {\boxed {\sf 2.1 \ kilograms}}[/tex]
Explanation:
Kinetic energy is the energy an object possesses due to motion. The formula 1/2 the product of mass and the squared velocity.
[tex]E_k=\frac{1}{2} mv^2[/tex]
We know the baseball's kinetic energy is 105 Joules. It is also traveling at a velocity of 10 meters per second. `
First, convert the units of Joules to make unit cancellation easier later in the problem. 1 Joule (J) is equal to 1 kilogram square meter per square second (kg*m²/s²). The baseball's kinetic energy of 105 J is equal to 105 kg*m²/s².
Now we know 2 values:
[tex]E_k= 105 \ kg*m^2/s^2[/tex][tex]v= 10 \ m/s[/tex]Substitute these values into the formula.
[tex]105 \ kg*m^2/s^2= \frac{1}{2} m (10 \ m/s)^2[/tex]
Now we need to solve for m, the mass. Solve the exponent.
(10 m/s)²= 10 m/s * 10 m/s = 100 m²/s²[tex]105 \ kg *m^2/s^2 = \frac{1}{2} m (100 \ m^2/s^2)[/tex]
Multiply on the right side.
[tex]105 \ kg *m^2/s^2 = m (\frac{1}{2} * 100 \ m^2/s^2)[/tex]
[tex]105 \ kg *m^2/s^2 = m (50 \ m^2/s^2)[/tex]
The variable, m, is being multiplied by 50 square meters per square second. The opposite of multiplication is division, so we divide both sides by that value.
[tex]\frac {105 \ kg *m^2/s^2 }{50 \ m^2/s^2}= \frac{ m (50 \ m^2/s^2)}{50 \ m^2/s^2}[/tex]
[tex]\frac {105 \ kg *m^2/s^2 }{50 \ m^2/s^2}= m[/tex]
The units of square meter per square second will cancel out.
[tex]\frac {105 }{50} \ kg= m[/tex]
[tex]2.1 \ kg=m[/tex]
The mass of the baseball is 2.1 kilograms.
A grocery shopper tosses a(n) 8.6 kg bag of rice into a stationary 18.1 kg grocery cart. The bag hits the cart with a horizontal speed of 5.2 m/s toward the front of the cart. What is the final speed of the cart and bag
Answer: 1.67 m/s
Explanation:
Given
Mass of bag is [tex]m=8.6\ kg[/tex]
Mass of cart is [tex]M=18.1\ kg[/tex]
bag hits the cart with horizontal speed of [tex]u=5.2\ m/s[/tex]
Suppose the system move with speed v after collision
Conserving the momentum
[tex]\Rightarrow mu+M(0)=(M+m)v\\\\\Rightarrow v=\dfrac{mu}{M+m}\\\\\Rightarrow v=\dfrac{8.6\times 5.2}{18.1+8.6}\\\\\Rightarrow v=1.67\ m/s[/tex]
Lab: Kinetic Energy What is the purpose of the lab, the importance of the topic, and the question you are trying to answer? What is your hypothesis (or hypotheses) for this experiment? What methods are you using to test this (or each) hypothesis? Section II: Data and Observations Locate the data and observations collected in your lab guide. What are the key results? How would you best summarize the data to relate your findings? Do you have quantitative data (numerical results or calculations)? Do you have qualitative data (written observations and descriptions)? How can you organize this date for your report? Section III: Analysis and Discussion What do the key results indicate? If you constructed graphs, what trends do they indicate in your data? Were there any problems with the experiment or the methods? Did you have any surprising results? Section IV: Conclusions What do the results tell you about your hypothesis(es)? How do the data support your claim above? If you could repeat the experiment and make it better, what would you do differently and why?
Pls hurry!!!!!!!! Worth 100 pts!
NO LINKS PLEASE HELP The Spring Tide is found during which moon phases?
Question 5 options:
First and Last quarter
Full and New Moon
Waxing and Waning Gibbous
It varies each month
Answer:
Full and New Moon
Explanation:
What would be the force required to accelerate an object that weighs 35 N up at a rate of .60 m/s^2?
Answer: [tex]2.14\ N[/tex]
Explanation:
Given
Force required to accelerate the object at the rate of [tex]0.6\ m/s^2[/tex]
The weight of the object is [tex]W=35\ N[/tex]
Mass of the object can be identified by dividing the weight by acceleration due to gravity
[tex]\Rightarrow m=\dfrac{W}{g}\\\\\Rightarrow m=\dfrac{35}{9.8}\\\\\Rightarrow m=3.57\ kg[/tex]
[tex]\therefore \text{Force F=}m\times a\\\Rightarrow F=3.57\times 0.6\\\Rightarrow F=2.14\ N[/tex]
Hell please thanks!!!!!!’
Answer:
liquid phase
Explanation:
it is liquid phase because molecules are not that tightly packed as solid and not that far away from each other as in gas phase.
4. A car accelerates at 2.5 m/s^2, covers 4 km in 0.8 min. How fast was it moving at the beginning
of the time interval? *
Answer:
Initial velocity, u = 23.33 m/s
Explanation:
Given the following data;
Acceleration = 2.5 m/s²
Distance = 4 km to meters = 4000 meters
Time = 0.8 mins to seconds = 0.8 * 60 = 48 seconds.
To find the initial velocity, we would use the second equation of motion;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Where;
S represents the displacement or height measured in meters.
u represents the initial velocity measured in meters per seconds.
t represents the time measured in seconds.
a represents acceleration measured in meters per seconds square.
Substituting into the equation, we have;
4000 = u*48 + ½*2.5*48²
4000 = 48u + 1.25*2304
4000 = 48u + 2880
48u = 4000 - 2880
48u = 1120
Initial velocity, u = 1120/48
Initial velocity, u = 23.33 m/s
The circular motion of water molecules extends to a depth that is equal to:a. wave height/wavelength.b. wave height/wave period.c. wavelength/wave height.d. wavelength/2.e. wavelength/20.
Answer:
d. wavelength/2.
Explanation:
The circular motion of water molecules extends from regions of shallow water to deep water. It ranges from a depth, H < L/20 for shallow water to a depth of H > L/2 for deep water where L is the wavelength of the wave.
For depths greater than L/2,the circular motion is not affected by the wave energy. So, the maximum depth for the circular motion is L/2 = wavelength/2.
1. A book has a weight of 3.5 Newtons. So the force to lift it would also be 3.5
Newtons. If you lift it up to a shelf, and apply the force for 4 meters, how much
work is done?
Answer:
anashe
Explanation:
full
Answer:
w=fxd
w=3.5x4
w=14
this is the correct answer
Find the current flowing across the 20 Ω
resistor. .
35 Ω
20 Ω
15 Ω
10V
[?]Α
Please no links
0.23 A across the 20-ohm resistor
Explanation:
The 20-ohm and 35-ohm resistors are in parallel so their combined resistance is
(1/20) + (1/35) = 0.0786 ohm^-1 or 12.73 ohms
These two are in turn connected in series with the 15-ohm resistor so the total resistance of the circuit is
R = 12.73 ohm + 15 ohm
= 27.73 ohm
Hence, the total current drawn by the circuit is
I = V/R = (10 V)/(27.73 ohm)
= 0.36 A
The potential across the 15-ohm resistor is
V1 = IR = (0.36 A)(15 ohm)
= 5.4 V
Now the potential across the 20-ohm and 35-ohm resistors is
V2 = V - V1 = 10V - 5.4V
= 4.6 V
This means that the current across the 20-ohm resistor is
I = V/R = (4.6 V)/(20 ohm)
= 0.23 A
Answer:
Answer would be 0.23
Explanation:
Put in 0.23
The process of converting energy produced by wind turbines into electricity is about 40 percent efficient. If the transport of electricity is 90 percent efficient and fluorescent light bulb efficiency is known to be 20 percent, what is the overall efficiency for converting wind into fluorescent lighting
Answer: 7.2%
Explanation:
Given
Efficiency of converting energy produced by wind into electricity is about [tex]\eta_1=40\%[/tex]
Transport of electricity efficiency [tex]\eta_2=90\%[/tex]
Fluorescent light bulb efficiency is [tex]\eta_3=20\%[/tex]
Overall efficiency is the product of all the efficiencies i.e.
[tex]\Rightarrow \eta=\eta_1\times \eta_2\times \eta_3\\\\\Rightarrow \eta=0.4\times 0.9\times 0.2\\\Rightarrow \eta=0.072\ \text{or}\ 7.2\%[/tex]
Therefore, the overall efficiency is 7.2%
HELPPPPPPPO
In the diagram, q1 = +6.60*10^-9 C and
q2 = +3.10*10^-9 C. Find the magnitude
of the total electric field at point P.
Explanation:
is this the full question?
Answer:
1258.46
Explanation:
Acellus
I. Complete with one of these phrasal verbs: hand back, take off, h
1. The plane
late because of the bad weather,
...... take off.....(complete)
Why do people sound weird when they breath in balloon air?
Answer:
your voice travels much more quickly across your vocal cords, also LOT less density which causes the sound to travel over twice as fast through helium than it does regular air.
ballon Air = Helium
Hope this helps and brainlist is appreciated !
- ☾
Why do the planets orbit the Sun in an elliptical shape?
Answer:
That's essentially how objects in orbits work as they move closer to the body they orbit, they accelerate faster and faster. Our penny will get so fast that, once it comes around the planet, it will be flung very far away, which will then slow it down. This is what creates an elliptical orbit.
Explanation:
for every 100 joules or useful energy output, the heater wastes 100 joules, find the input energy of the heater.
You have a grindstone (a disk) that is 98.0 kg, has a 0.335-m radius, and is turning at 100 rpm, and you press a steel axe against it with a radial force of 23.6 N. Assuming the kinetic coefficient of friction between steel and stone is 0.192, calculate the angular acceleration of the grindstone.
Answer:
[tex]a=0.276[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=98.kg[/tex]
Radius [tex]r=0.335[/tex]
Angular velocity [tex]\omega=100rpm[/tex]
Radial force of [tex]F_r=23.6 N.[/tex]
Kinetic coefficient of friction [tex]\mu=0.192[/tex]
Generally the equation for Kinetic Force is mathematically given by
[tex]F_k=\mu.F_r[/tex]
[tex]F_k=0.192*23.6[/tex]
[tex]F_k=4.5312[/tex]
Generally the equation for Torque on Center is mathematically given by
[tex]Ia=f_k*r[/tex]
Where
[tex]I=\frac{Mr^2}{2}[/tex]
Therefore
[tex]a=\frac{2f_k}{Mr}[/tex]
[tex]a=\frac{2*4.5312}{98*0.335}[/tex]
[tex]a=0.276[/tex]
Therefore Angular acceleration of the grindstone is
[tex]a=0.276[/tex]
You’ve probably seen how the surface of a tire can partially melt and leave a mark on the road when a car’s brakes are applied really hard. Explain why the surface of the tire melts.
Answer:
The friction of braking heats up the tire and the road. The temperature is so high that it reaches the melting point of the rubber in the tire. The melting rubber is what leaves a mark on the road.
Explanation:
Answer:
the friction of braking heats up the tires and the road. then the temperature gets even hotter to the point where it melts the rubber.
Explanation:
this is my answer so be careful how you copy it, but you've got this guys schools is almost out stay strong an have fun and be safe this summer keep pushing <33.
remember you're loved by many
- Jason Edwards 5/15/23
Around the turn of the twentieth century, inventor Robert Shuman was engineering products that used energy directly from the Sun to power motors and farms. He stated that coal and oil would eventually run out and that humans needed to learn how to use the more-abundant energy resource of the Sun. During which stage of technological design did Shuman identify that using oil and coal would be a problem? first second third fourth
Answer: First stage
Explanation:
The four stages of technological design include:
• identifying a problem.
• Designing a solution.
• Implement, build, and test the design.
• Determine if solution met the need.
In this scenario, Robert Shuman identified the problem. This was depicted as he stated that coal and oil would eventually run out and that humans needed to learn how to use the more-abundant energy resource of the Sun,
What physical quantity do you obtain when you divide
molar mass (Mm) by molar volume (Vm)?
Answer:
The mass density (ρ)
Explanation:
The molar volume (Vm) is the volume that a mole of an element or compound occupies at standard temperature and pressure STP
The molar volume can be found as follows;
[tex]Vm = \dfrac{Mm}{\rho}[/tex]
Where;
Mm = The molar mass
ρ = The mass density
The molar mass (Mm) of an element or a compound is the ratio of the mass of the element or compound to the amount of the element or compound in the given mass
The mass density, ρ, of an element or a compound is the mass of a unit volume of the element or compound
Therefore, we have;
[tex]\rho = \dfrac{Mm}{Vm}[/tex]
When we divide the molar mass (Mm) by the by the molar volume (Vm), we obtain the mass density (ρ).
Which of these planets is the odd one out based on their physical features?
a. Mars
b. Uranus
c. Jupiter
d. Neptune
Answer:
mars
Explanation:
the planet that is the odd is Mars
before each item.
1. Which of the following refers to chemical digestion?
A. Chewing of food B.. Grinding of food C. Tearing of food D. Amylase in the saliva
2. In what organ most of the absorption process happen?
A. Stomach B. Small intestine C. Large intestine D. Esophagus
3. It is a digestive disorder wherein the body has the inability to digest sugar?
A. Gastritis B. Lactose intolerance
C. Diarrhea D. Peptic ulcer
4. The following are part of the digestion process EXCEPT
A. ingestion B. assimilation
C. excretion D. respiration
5. It helps to moisten the food and contains the enzyme amylase.
A. Saliva
B. Stomach C. Mouth D. Teeth
6. It is a process of taking in digested food nutrients into the cell by providing new protoplasm and energy
needed during the cell activities.
A. Ingestion B. assimilation C. Absorption D. Excretion
7. What causes constipation?
A. Lack of fiber in the body B. Uncontrolled growth of abnormal cells
C. Lack of enzyme lactase D. Excessive consumption of coffee and acidic drinks
8. The nutrients from the digested food are being absorbed by the following processes except
A. passive diffusion B. facilitated diffusion C. active transport D. ingestion
9. It is the organ that is responsible for reabsorbing water and minerals that are not digested in the small
intestine.
A. Stomach B. Large intestine C. Small intestine
D. Esophagus
10. The following are the reasons why digested food should be assimilated into the cell EXCEPT
A. they are converted into protoplasm. C. they provide energy needed in cell activities
B. they are needed to store fats. D. they are converted to build cell membranes
11. What is the best treatment for a person who suffers lactose intolerance?
A. Take antibiotics
B. Balanced diet
C. Take lactase supplements before eating food contains dairy D. Practice healthy lifestyle
12. What happen during the assimilation process?
A. Absorbed nutrients are delivered into the cell
B. Breaking down of food into tiny pieces
C. Elimination of waste product of the digestion process D. Absorption of nutrients from the digested food
13. How does the enzyme amylase help in the absorption of nutrients?
A. It helps in the digestion of proteins.
B. It helps in the digestion of fats.
C. It helps in the digestion of carbohydrates. D. It helps in the digestion of lipids.
14. It is characterized as loose bowel caused by an infection of bacteria that we get from the food we eat.
D. GERD
A. Diarrhea
C. Gastritis
B. Peptic Ulcer
15. How saliva helps in the digestion process?
A. It reabsorbs nutrients from the food we eat.
B. It contains the enzyme amylase that helps in the digestion of starch.
C. It absorbs nutrients and distribute it in the bloodstream.
D. All of the above
16. How colon cancers can be treated?
B. By exercising
A. By eating foods rich in fiber
D. By undergoing surgeries.
g C. By taking lactase supplements
Answer:
1:D
2:B
3:B
4:D
5:A
13:A
14:A
15:B
16:A
7:A
9:B
8:B
11:C
12:A
Explanation:
Sorry for incomplete answers
A 120 volt refrigerator uses 650 watts. Calculate how much work is done by the refrigerator in one hour?
Answer:
2,340,000 J
Explanation:
Work done can be described as when energy or force is applied to an object to cause displacement
Work done is measured in joules
1 Watt = 1 Joule / second
650 watts = 650 Joules / second
convert 650 joules to seconds by multiplying by 3600
650 x 3600 = 2,340,000 J
What statements are true???
Answer:
Explanation:
opposite charges attract
same charges repel
neutral charges don't attract or repel
4.) What determines a star brightness? *
a. Size
b. Temperature
c. Size & Temperature
d. Color & Temperature
8. The mediator particle for gravitational force is on
(1 Point)
gluon
vector boson
photon
gravitone
Answer:
Gravitone
Explanation:
In theories of quantum gravity, the graviton is the hypothetical quantum of gravity, an elementary particle that mediates the force of gravity. There is no complete quantum field theory of gravitons due to an outstanding mathematical problem with renormalization in general relativity.
A chemical plant produces ammonia using the following reaction. What
trade-off is made by running the reaction at a high temperature?
3H2 + N2 + 2NH3 + energy
O A. The higher temperature decreases the forward reaction rate, and
the pressure of the system is also lowered.
O B. The higher temperature increases the reaction rate, but it also
favors the reverse read on.
C. The higher temperature increases the forward reaction rate, and
the higher pressure increases the reaction rate.
D. The higher temperature decreases the reaction rate, but it also
favors the forward reaction.
Answer: B
Explanation: The higher temperature increases the reaction rate but also favors the reverse read on.
The higher temperature increases the reaction rate, but it also favors the reverse read on. So, option B.
What is meant by rate of a reaction ?The pace at which the products are created from the reactants in a chemical reaction is referred to as the rate of reaction.
Here,
Generally, reactions progress more quickly as the temperature rises.
The average kinetic energy of the reactant molecules will rise with a rise in temperature. The number of molecules having threshold energy rises, increasing the quantity of efficient collisions that actually occur.
Therefore, as the temperature of the reaction is increased, the rate of the reaction increases. But also favors the reverse reaction.
Hence,
The higher temperature increases the reaction rate, but it also favors the reverse read on.
To learn more about rate of reaction, click:
https://brainly.com/question/30546888
#SPJ5
sound does not propagate through a vacuum why
Explanation:
Because, there is not atmosphere in vacuum. So, sound does not propagate through a vacuum.
hello please help i’ll give brainliest
Answer:
Acceleration is defined as the rate of change of velocity
Explanation:
Its A
what is the correct name for a bond between two phosphorus adtoms and three oxygen atoms
Covalent
Explanation:
Covalent Bond
Answer:
diphosphorus trioxide
Explanation:
If an atom becomes an ion by loosing 4 electrons, what will the net charge of the atom be? pls hurry NO LINKS!
1) -1.6 x 10^-19 C
2) - 3.2 x 10^-19 C
3) - 4.8 x 10^-19 C
4) -6.4 x 10^-19 C
Answer:
1) - 35
2) - 35
3) - 67
4) - 83