Answer:
D. 1,950 g
Explanation:
I completed the test and it is the correct answer!
The mass of one mole of gallium iodide GaI₃ is 449.7 g/mol. Hence, the mass of 4.32 moles of GaI₃ is 1950 g.
What is gallium iodide?Gallium iodide is a covalent compound formed by the electron sharing between Ga and three iodine atoms. Ga has three valence electrons and each is shared with three iodine and each iodine in turn shares 3 electrons to Ga.
Atomic mass of Ga = 69 g/mol
Atomic mass of I = 126.9 g/mol
mass of 3 iodine atoms = 3 × 126.9 = 380.7 g
Molar mass of GaI₃ = 380.7 + 69 = 449.7 g.
Molar mass of a compound is the mass of one mole of the compound. Hence, one mole of the compound is 449.7 g. Mass of 4.32 moles is :
4.32 × 449.7 ≅1950 g.
Therefore, the mass of 4.32 moles of GaI₃ is approximately 1950 g.
To find more on gallium iodide, refer here:
https://brainly.com/question/13745972
#SPJ2
How much of a 10 M solution is needed to make 1 liter of a 1M solution?
a. 1ml
b. 1000ml
c. 10ml
d. 100ml
i dont know I hope someone knows soon take care
According to molar concentration, 100 ml of 10 M solution is needed to make 1 liter of a 1 M solution.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.In case of two solutions, molar concentration is found out by, M₁V₁=M₂V₂.
On substitution in above formula, V₁=1×1/10=0.1 L=100 ml.
Thus, 100 ml of a 10 M solution is needed to make 1 liter of a 1 M solution.
Learn more about molar concentration,here:
https://brainly.com/question/21841645
#SPJ2
Calculate the number of moles of oxygen (O2) in 24.0 g of O2?
Number of moles = mass/ molar mass
it implies that n(O2) = 24.0g / 32
= 0.75 mols
Balance the following equations.
Answer:
A) Mg + H2SO4 → MgSO4 + H2
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
C) CaO + H2O → Ca(OH)2
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
Explanation:
A) Mg + H2SO4 → MgSO4 + H2
The equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
This equation is balanced by putting 2 in front of HCl on the left hand side to balance the elements on the right hand side.
C) CaO + H2O → Ca(OH)2
Thus equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
This equation is balanced by putting 3 in front of Ag and 4 in front of HNO3 on the left hand side while we put 3 in front of AgNO3 on the right side to balance the elements on the right hand side.
2 H2(g) + O2 (g) --> 2 H20 (1)
How many moles of hydrogen gas do you need to make 2 moles of liquid water?
Answer:
4moles of hydrogen atoms
Explanation:
The second conversion factor reflects the number of atoms contained within each molecule. Two water molecules contain 4 hydrogen atoms and 2 oxygen atoms. A mole of water molecules contains 2 moles of hydrogen atoms and 1 mole of oxygen atoms.
Why do the two electrons spend their time equally between both hydrogen atoms? In other words, why can’t one hydrogen just take the other’s electron?
The transmission of thermal energy that is caused by the flow of a fluid’s particles. It can only occur with liquids and gases is...
Consider an ideal gas contained in a cylinder with the volume 34.4L, temperature 667K and pressure 2atm.What will be pressure of the gas if it is heated at 1000k and the volume becomes 50L.
Given :
An ideal gas contained in a cylinder with the volume 34.4L, temperature 667K and pressure 2 atm.
To Find :
What will be pressure of the gas if it is heated at 1000k and the volume becomes 50L.
Solution :
We know, by ideal gas equation :
[tex]Pv = nRT[/tex]
Now, in the given question only their are two state and also their is no leakage so amount of gas is also constant.
So,
[tex]\dfrac{P_1V_1}{T_1} = \dfrac{P_2V_2}{T_2}\\\\\dfrac{2\times 34.4}{667} = \dfrac{P_2 \times 50}{1000}\\\\P_2 = \dfrac{2\times 34.4 \times 1000}{667 \times 50}\ atm\\\\P_2 = 2.06 \ atm[/tex]
Therefore, the pressure of gas is 2.06 atm.
no links pls it’s very unhelpful
answer : i don’t knowww :)
Right spelling:
Answer: I don’t know. :)
2
A chart with the densities of four metals is shown.
Metal
Density (gicm')
Titanium
4.5
Zinc
7.1
Nickel
88
Silver
10.5
Students were given a sample of an unknown metal and told to determine
its density. They measured its mass as 26.4 g and its volume as 3.0 cm?
Use the chart to determine which metal the students were given.
Answer:
mass(m)=26.4g
volume (v)=3.0cm²
we have
density =m/v=26.4/3=8.8g/cm³
since it is equal to density of nickel.
Option C nickel is a required answer.
Answer:
[tex]\huge\boxed{\fcolorbox{green}{yellow}{option \: \: c}}[/tex]
When 0.875 g. of magnesium was heated in air, 1.25 g. of magnesium oxide
(MgO) was produced. How much oxygen must be added?
Answer:
1. What is the coefficient for calcium in the balanced equation?
2 Ca + 5 NaOH → 4 Na + 2 Ca(OH)2
2. The burning of 20.0 g of acetylene (C2H2) produces what mass of carbon dioxide? You must
write the equation, balance it and solve the mass-mass problem.
a. Balanced equation:
2 C2H2 + 5 O2 4 CO2 + 2 H2O
Explanation:
A car engine produces 604 kJ of mechanical energy from fuel capable of producing 2416 kJ of energy. The efficiency of the engine is
A car engine produces 604 kJ of mechanical energy from fuel capable of producing 2416 kJ of energy, then efficiency of the engine is 25%.
How do we calculate efficiency?We can calculate the efficiency by using the below equation as:
Efficiency = (Actual production / Theoretical production) × 100%
Given that,
Actual production = 604 kJ
Theoretical production = 2,416 kJ
On putting values in given equation, we get
Efficiency = (604/2,416) × 100% = 25%
Hence efficiency of the engine is 25%.
To know more about efficiency, visit the below link:
https://brainly.com/question/15418098
#SPJ2
Give three examples of energy traveling in waves
Answer:
ELECTROMAGNETIC SPECTRUM. Radios, televisions, mobile phones, and radar use signals made up of electromagnetic waves. These are waves that carry energy as electricity and magnetism at the speed of light. Light we can see is also an electromagnetic wave, but other types of electromagnetic wave are invisible.
Explanation:
~Hope this helps
If an amine functional group is added to an organic compound, the name of the compound will begin with
Answer for a apple it would be happle
xplanation:
A student dissolves 10 grams of sugar in enough water to make 25 ml of solution. What is the concentration of the solution
Answer: The concentration of given solution is 11.68 M.
Explanation:
Given: Mass of solute = 10 g
Volume of solution = 25 mL
Convert mL into L as follows.
[tex]1 mL = 0.001 L\\25 mL = 25 mL \times \frac{0.001}{1 mL}\\= 0.025 L[/tex]
Number of moles is the mass of substance divided by its molar mass. The moles of sugar (molar mass = 342.3 g/mol) is as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{10 g}{342.3 g/mol}\\= 0.0292 mol[/tex]
Molarity is the number of moles of solute present in a liter of solution.
Hence, concentration of given solution is calculated as follows.
[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\= \frac{0.0292 mol}{0.025 L}\\= 11.68 M[/tex]
Thus, we can conclude that the concentration of given solution is 11.68 M.
Can magic 8 ball wash with water?
Hikers have noticed that a sealed bag of potato chips puffs up when taken to the top of a mountain. Suppose that at the valley floor below, the air pressure is 1.0 atm, temperature is 25°C, and the volume of the chip bag is 0.985 L. At the top of the mountain, the temperature is 22°C and the chip bag has puffed up to 1.030 L.
What is the air pressure on top of the mountain?
__ atm
Answer:
0.95
Explanation:
trust
During a combustion reaction, 9.00 grams of oxygen reacted with 3.00 grams of CH4.
What is the amount of the leftover reactant?
0.74 grams of methane
0.89 grams of methane
1.22 grams of oxygen
1.45 grams of oxygen
Answer:
0.74
Explanation:
this is the correct answer. I followed a correct answer that had the same probelm with different values, swithxed it with mine, and got 0.75. So its basically 0.74
give me the type of reactions ___ CuCO3 → ___ CuO + ___ CO2
PLEASE HELP ME :(((
What is the relative size and composition of the universe, a galaxy, and a solar system?
Answer:
about 93 billion light years
Explanation:
The observable Universe is, of course, much larger. According to current thinking it is about 93 billion light years in diameter.
Answer:
93 miles
Explanation: We can determine the distance to the sun using the time light takes to get to Earth. Just multiply the speed of light by the amount of time it takes light to get to Earth. That's 500 seconds.
186,282 miles per second x 500 seconds = 93,141,000 miles
The sun is about 93 million miles away from Earth. It will take our fastest space shuttle moving at a constant maximum speed about 108 days to travel this same distance.
What is a jet stream. in your own words but be more detailed about what you say.
(don't send a link)
How many joules of heat are needed to raise the temperature of 62.0 g of ethylene glycol from 13.1 C to 40.5C?
Answer:
Q = 4133.2 J
Explanation:
Hello there!
In this case, since these calorimetry problems are based off the following heat equation involving heat (Q), mass (m), specific heat (C) and temperatures (T):
[tex]Q=mC(T_2-T_1)[/tex]
Thus, we plug in the given variables to obtain:
[tex]Q=62.0 g*2.433 \frac{J}{g\°C}* (40.5\°C-13.1\°C)\\\\Q=4133.2J[/tex]
Regards!
How would the number of atoms in a 2.02g sample of hydrogen compare to the number of atoms in a 32.00g sample of oxygen
Answer:
Number of atoms is equal.
Explanation:
1 mol of anything contains NA particles.
NA is known as Avogadro's number, 6.02×10²³
We determined the moles of each compound. Both molecules are dyatomic,
H₂ → 2.02 g . 1mol / 2.016 g = 1 mol
O₂ → 32 g . 1mol / 32g = 1 mol
Both have the same amount of moles.
In conclussion, the number of atoms is the same in both samples.
down there (pls hurry!!)
If some salt were accidently spilled as it was transferred from the balance to the cup would your calculated enthalpy of solution of the salt be too high or too low
Answer:
It would be to low
Explanation:
If some salt were accidently spilled as it was transferred from balance to cup calculated enthalpy of solution of salt be too low as there will be loss in mass which would lead less solubility of salt and hence less enthalpy.
What is solubility?Solubility is defined as the ability of a substance which is basically solute to form a solution with another substance. There is an extent to which a substance is soluble in a particular solvent. This is generally measured as the concentration of a solute present in a saturated solution.
The solubility mainly depends on the composition of solute and solvent ,its pH and presence of other dissolved substance. It is also dependent on temperature and pressure which is maintained.Concept of solubility is not valid for chemical reactions which are irreversible. The dependency of solubility on various factors is due to interactions between the particles, molecule or ions.
Learn more about solubility,here:
https://brainly.com/question/29589228
#SPJ5
write a paragraph to explain how the transformation of water from one state of matter to another is important for the water cycle
In order for us to have water to drink, it first needs to go through a process called the water cycle. And in that water cycle there’s a process called evaporation. Evaporation is the process by which water changes from a liquid to a gas. In order for it to rain we need clouds and clouds are made of water. The water is heated causing water molecules to convert into gas, that gas then goes through a process called condensation creating clouds. At some point those clouds will be full of water, and all that water will then cause the cloud to release the water molecules causing rain.
The water cycle shows the continuous movement of water within the Earth and atmosphere. It is a complex system that includes many different processes.
Liquid water evaporates into water vapor, condenses to form clouds, and precipitates back to earth in the form of rain and snow.There are four main parts to the water cycle:
Evaporation, Convection, Precipitation and Collection.
Evaporation is when the sun heats up water in rivers or lakes or the ocean and turns it into vapor or steam.
The water vapor or steam leaves the river, lake or ocean and goes into the air.
Learn more:
brainly.com/question/25226746
help me please this is chemistry
How many atoms are in 5.9 g of N2?
Answer:
Number of atoms in 5.9 g of N2 = 1.268 *10^23
Explanation:
Weight of one mole of N2 is 28.0134 g
In one mole of N2, number of atoms = 6.023 *10^23
Number of atoms in 28.0134 g (one mole) of N2 = 6.023 *10^23
Number of atoms in 1 g of N2 = 6.023 *10^23/28.0134
Number of atoms in 5.9 g of N2 = 6.023 *10^23/28.0134 * 5.9
= 1.268 *10^23
I need help for chemistry, I barely know English...
Answer:
6c12
Explanation:
M
Mass can be measured in local units like dharni pau eto. Discuss the advantages of using
standard units of mass over the local units of mass. (Any two points)
N2 Points)
soup answer
Answer:
1.They are reliable.
2.They dont vary from person to person
Determine the grams of water produced when 250 grams of barium hydroxide react
with 125 grams of HCI. Refer to the balanced equation below.
Ba(OH)2 (aq) + 2HCl (aq) --> 2H2O (l) + BaCl2 (aq) (balanced)
Answer:
Explanation:
Ba(OH)₂ (aq) + 2HCl (aq) --> 2H₂O (l) + BaCl₂ (aq)
171 g 2 x 36.5 g 2 x 18 g
73 g of HCl reacts with 171 g of Ba(OH)₂
125 g HCl reacts with 171 x 125 / 73 g of Ba(OH)₂
= 292.8 g of of Ba(OH)₂
Ba(OH)₂ available is 250 g , so it is the limiting reagent .
171 g of Ba(OH)₂ forms 36 g of water
250 g of Ba(OH)₂ forms 36 x 250 / 171 g of water
= 52.63 g of water.