Answer:
0.367M
Explanation:
Molarity refers to the molar concentration of a solution. It can be calculated using the formula below:
Molarity = n/V
Where;
n = number of moles (mol)
V = volume (L)
According to the given information in this question;
n = 0.55 mole
V = 1.50 L
Molarity = 0.55/1.50
Molarity = 0.367M
2. Identify the limiting reactant when 4.68 g of iron reacts with 2.88 g of sulfur to produce Fes.
Fe +
_Sg → FeS
B
C с
A
+
Help please I’ll mark brainliest
Answer:
Iron is limiting reactant
Explanation:
Based on the reaction:
Fe + S → FeS
1 mole of iron reacts per mole of Sulfur
To solve this question we must convert the mass of each reactant to moles using molar masses of each reactant. As the reaction is 1:1, the reactant with the lower amount of moles is limiting reactant.
Moles Fe -Molar mass: 55.845g/mol-
4.68g * (1mol / 55.845g) = 0.0838 moles
Moles S -Molar mass: 32.065g/mol-
2.88g * (1mol / 32.065g) = 0.0898 moles
As the amount of moles of Fe < Moles S,
Iron is limiting reactant
When 4.68 g of iron reacts with 2.88 g of sulfur to produce FeS, iron is the limiting reagent.
What is limiting reagent?
If in a chemical reaction two reactants are present and one of them is present in less quantity as compared to other, is known as limiting reagent.
Given chemical reaction is:
Fe + S → FeS
From the stoichiometry of the reaction it is clear that equal moles of both reactant is required for the formation of product, so their mole ratio is 1:1.
Now we calculate the moles by using the formula:
n = W/M, where
W = given mass
M = molar mass
Moles of 4.68g of iron = 4.68g / 55.845g/mole = 0.0838 moles
Moles of 2.88 of sulfur = 2.88g / 32.065g/mole = 0.0898 moles
Moles of iron is less as compare to the sulfur, so it is the limiting reagent.
Hence, iron is the limiting reagent.
To know more about limiting reagent, visit the below link:
https://brainly.com/question/14222359
.?lkikjjjmmjj
hhhhgyhhjjj
Answer:
ertyuioekgdctifrofy?
Explanation:
Proponer una propuesta de acción contra la degradación del suelo basándose en tres tipos de argumentos de fuentes confiables
Answer:
Cobertura vegetal, mantillo y piedra triturada.
Explicación:
Para evitar la degradación del suelo, debemos plantar una cubierta vegetal perenne que proteja el suelo de la erosión del viento y el agua sujetándolo firmemente con sus raíces. El mantillo también se usa para prevenir la erosión del suelo. En aquellas zonas donde la cobertura vegetal no es posible, tenemos que utilizar piedras trituradas para cubrir el suelo con el fin de evitar el contacto directo con el viento. Entonces, estas acciones pueden prevenir la degradación del suelo y mantener el suelo en su estado original.
Which radioisotope is naturally occurring?
Answer:
[tex]\frac{131}{53} I[/tex]
Explanation:
A naturally occurring element is an element that is not produced in a nuclear reaction.
Most of the trans-uranium elements are not natural, they are all synthetic elements which are produced as a result of nuclear reactions. They are unknown in nature.
Apart from [tex]\frac{131}{53} I[/tex], all other radioisotopes listed among the options are not natural elements.They are products of nuclear reactions.
PLEASE HELP!
an element with 8 protons and 10 neutrons
Answer:
oxygen ion O2-
Explanation:
because it has 8 protons and gave gained 2 electron so O2-.
Drag each tile to the correct box,
Arrange the processes of the water cycle in the correct order, starting with the heat from the Sun.
Answer:
4
3
2
6
1
5
I hope this helped!
3. How much heat (in joules) is needed to raise the temperature of 355 g of ethanol I
(c = 2.4 J/gºC) by 63°C?
q=mcAT
Answer:
53676 J
Explanation:
m = 355 g
c = 2.4 J/gºC
ΔT = 63°C
q = mcΔT
= (355)(2.4)(63)
= 53676 J
The amount of heat is 53676J to raise the temperature of 355 g of ethanol.
What is temperature?Temperature is a measurement of the amount of energy of the atoms in a system or a physical quantity that expresses hot and cold.
What is heat?Heat is energy that is transmitted through one body to some other due to a temperature differential. When two bodies of different temperatures come together, energy can be transferred (heat flows) from the hotter to the colder.
It can be determined by the formula:
q =mCΔT.
where, q is heat, m is mass , C is and T is temperature.
Calculation of heat is shown below:
It is given that, mass of ethanol = 355 g, c = [tex]2.4 J/g^{0}[/tex] C, ΔT. = [tex]63^{0} C[/tex]
Now, put the values of given data in heat formula:
q =mCΔT
= 355×2.4×63
=53676J.
Therefore, the amount of heat will be 53676J to raise the temperature of 355 g of ethanol
To know more about heat and temperature click here.
https://brainly.com/question/1429452.
#SPJ2
What molar concentration (molarity) results when 1.28 L of 14.38 M HCl is diluted to 9.45 L of water?
Answer:
1.95 M
Explanation:
Molarity is a measure of the molar concentration of a substance (solution). In relation to the volume, it is calculated using the formula as follows;
C1V1 = C2V2
Where;
C1 = initial concentration (M)
C2 = final concentration (M)
V1 = initial volume (L)
V2 = final volume (L)
According to the provided information in this question;
C1 = 14.38 M
C2 = ?
V1 = 1.28 L
V2 = 9.45 L
Using C1V1 = C2V2
14.38 × 1.28 = C2 × 9.45
18.4064 = 9.45 C2
C2 = 18.4064 ÷ 9.45
C2= 1.95 M
The dark areas on the world map show places with climates that are alike. The table shows information for those places. A
student is using the map and table to describe the climates of those places.
Which sentence describes the climates of the dark areas
on the map?
A. They are arid climates because they are dry and
hot
B. They are polar climates because they are dry
and cold
C. They are tropical climates because they are hot
and wet.
D. They are temperate climates because they are
mild and moist.
Usual Temperature Usual Precipitation
Low to very low
Little or no snow all year
temperatures all year
Answer:
Choice B
They are polar climates because they are dry
and cold
e) A plutonium atom splits apart to form two smaller atoms and free neutrons,
What type of reaction is this, where is it most likely to occur, and what else is
emitted during the reaction? (3 points)
Answer:
subject?
Explanation:
Which results in a chemical change?
A. A teacher feels a rough cloth
B. A student colors a blue paper
C. A student smells a flower
D. A teacher lights a candle
Answer:
D. I am pretty sure
Explanation:
:))))))
Answer:
D. A teacher lights a candle
Explanation:
How does velocity affect the movement of an object?
Answer:
when the velocity is at a higher *rate of speed*, the faster the object will move!
Explanation:
Mrs. Borunda has a sample of oxygen gas that occupies a volume of 600 L at 400 atm pressure. What will the pressure be if she increases the volume to
800 L?
300 atm
450 atm
540 atm
250 atm
Answer:
P₂ = 300 atm
Explanation:
Given that,
Initial volume, V₁ = 600 L
Initial pressure, P₁ = 400 atm
We need to find the pressure if the volume is 800 L.
We know that the relation between pressure and volume is given by :
[tex]P\propto \dfrac{1}{V}\\\\\dfrac{P_1}{P_2}=\dfrac{V_2}{V_1}\\\\P_2=\dfrac{P_1V_1}{V_2}\\\\P_2=\dfrac{600\times 400}{800}\\\\P_2=300\ atm[/tex]
So, the new pressure is equal to 300 atm.
What is the correct unit for M1 and M2?
Answer:
M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.
Explanation:
M1 and M2 are the masses of two. objects exerting the force on each other, and R is the distance. between their centers.
Why are humans responsible for oil spills
Answer:
Oil spills into rivers, bays, and the ocean most often are caused by accidents involving tankers, barges, pipelines, refineries, drilling rigs, and storage facilities.
Spills can be caused by:
people making mistakes or being careless.
equipment breaking down.
natural disasters such as hurricanes.
deliberate acts by terrorists, countries at war, vandals, or illegal dumpers.
Explanation:
Hope this helped Mark BRAINLIEST!!!
The decomposition of potassium chlorate, KClO3, is used as a source of oxygen in labs.
How many moles of potassium chlorate are needed to produce 6.83 moles of oxygen gas?
Reaction takes place is
2KClO3 --> 2KCl + 3O2
from above equation 2 moles of potassium chlorate is forming 3 moles of Oxygen gas.
now given 6.83 moles of oxygen and moles of potassium chlorate is missing,
consider x moles of potassium chlorate are needed to form 6.83 moles of oxygen
from above condition, .
3 》》》》2
x 》》》》6.83
3/x = 2/6.83
x = 3×6.83/2
x= 10.245
Answer- 10.245 moles of potassium chlorate are needed to produce 6.83 moles of oxygen gas.
All of the following are empirical formulas except:
C2H3O2
C6H6
CHO2
CH2O
They have one electron in the outermost electron shell. These are very active metals and easily lose their single valence electron.
Answer: The statement they have one electron in the outermost electron shell. These are very active metals and easily lose their single valence electron, is true.
Explanation:
Metals are the species which tend to lose electron(s) to acquire stable noble gas configuration.
Elements which tend to lose a single electron in order to acquire stability are active in nature because losing one electron is more easy as compared to losing two or more electrons.
For example, atomic number of sodium is 11 and its electronic distribution is 2, 8, 1.
Since, it contains only one valence electron and by losing it sodium will acquire stability. Hence, sodium is a very reactive metal.
Thus, we can conclude that the statement they have one electron in the outermost electron shell. These are very active metals and easily lose their single valence electron, is true.
DIRECTIONS: Classify the following unbalanced chemical equations according to the six types
of chemical reactions. Write your answer on the space provided for each number.
1. NaOH + KNO3 NaNO3 + KOH
2. CH4 + O2 CO2 + 2H2O
3. Fe + NaBr FeBr3 + Na
4. CaSO4 + Mg(OH)2 Ca(OH)2 + MgSO4
5. NH4OH + HBr H2O + NH4Br
6. P4 + O2 P2O4
7. NaNO3 NaNO2 + O2
8. C18H18 + O2 CO2 + H2O
9. H2SO4 + NaOH NaSO4 +H2O
10.NiSO4 + Li3PO4 Ni3(PO4)2 + Li2SO4
The table below shows the height of a ball x seconds after being kicked.
A 2-column table with 5 rows. The first column is labeled time (seconds) with entries 0, 0.5, 1, 1.5, 2, 2.5, 3. The second column is labeled height (feet) with entries 0, 35, 65, 85, 95, 100, 95.
What values, rounded to the nearest whole number, complete the quadratic regression equation that models the data?
f(x) =
x2 +
x + 0
Based on the regression equation and rounded to the nearest whole number, what is the estimated height after 0.25 seconds?
feet
Answer:
-16
81
19
Explanation:
The quadratic regression equation is [tex]y = -16x^2 +81x[/tex], and the estimated height in 0.25 seconds is 19 feet
What are regression equations?Regression equations are used to determine the relationship between sets of data
The dataset is given as:
Time (seconds) Height (feet)
0 0
0.5 35
1 65
1.5 85
2 95
2.5 100
3 95
To determine the quadratic regression equation, we make use of a graphing calculator.
From the graphing calculator, we have the following calculation summary:
a = -16.429
b = 81.071
c = -0.357
A quadratic regression equation, is represented as:
[tex]y = ax^2 + bx + c[/tex]
So, we have:
[tex]y = -16.429x^2 +81.071x -0.357[/tex]
Approximate
[tex]y = -16x^2 +81x[/tex]
The estimated height in 0.25 seconds is:
[tex]y = -16* 0.25^2 +81 * 0.25[/tex]
[tex]y = 19.25\\[/tex]
Approximate
[tex]y = 19[/tex]
Hence, the estimated height in 0.25 seconds is 19 feet
Read more about quadratic regression at:
https://brainly.com/question/25794160
Many electrical power plants use fossil fuels, a non-renewable resource to produce electricity?
A:Solar energy can be used to push energy along power lines
B:Wind energy can be used to cool overheated electrical lines
C:Moving water can be used to carry electricity to homes and businesses
D:Biomass can be used to generate heat that can be converted into electricity
Answer:
Explanation:
Thermal Power Plants generate electricity by converting heat into electricity, essentially by burning a fuel. ... A coal power plant works in much the same way, but instead of a nuclear reactor heating water to make steam, the heat from the burning coal powers a steam turbine
Answer:
Solar energy can be used to push energy along power lines.
Explanation:
Im Might be wrong, might have to fact check it but im taking the test now so :)
Please help!!
All fake answers get reported immediately. Yes, I am a girl -_-
Answer:
1.)C₃H₈O
2)OH
3.)1-propanol
1.) C4H8O
2.) C2H6O or CH3CH2OH
3.)Ethanol
Explanation:
Hope this help
Balance :FeCl3 + __Ca(OH)2 → ___ Fe(OH)3 + __ CaCl2
Research online to find out what the acidity of the rainfall is where you live. If you live in an area which is affected by acid rain, where do you think it is coming from and why?
Write 3-5 paragraphs describing the effects.
If you do not live an area effected by acid rain, choose another city that is effected by acid rain.
Answer & Explanation: Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.
Answer:
What is acid rain? Acid rain occurs when sulfur dioxide and nitrogen oxide are released into the air to create a chemical reaction. When the two mix in the air (oxygen), they will get into the water and mix with other pollutants in the air, making acid rain.
What causes acid rain the most? It can be caused by useing nonrenewable resources. Which inclues coal, oil, ect.
What effects can acid rain have? It causes respiratory issues in animals and humans. When acid rain falls down and flows into the rivers and ponds it affects the aquatic ecosystem. It alters the chemical composition of the water, to a form which is actually harmful to the aquatic ecosystem to survive and causes water pollution which can harm our fresh water supply.
What does temperature surround when the kinetic energy is moving fast ?
When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object increases as its temperature increases.
In chemistry, we define the temperature of a substance as the average kinetic energy of all the atoms or molecules of that substance. Not all of the particles of a substance have the same kinetic energy. At any given time, the kinetic energy of the particles can be represented by a distribution.
In physics, temperature is defined as the average kinetic energy of the particles in an object. ... When particles move more quickly, temperature is higher and an object feels warmer. When particles move more slowly, temperature is lower and an object feels cooler.
乁(ᵔヮᵔ)ㄏ
Which formula represents an isomer of this compound?
Answer:
Explanation:
I can’t explain but this is the answer LOL
What is the molarity of a 9.13 L soda that contains 13.83 of sugar?
Answer:
1.52 M
Explanation:
Molarity of a solution is calculated as follows:
Molarity = number of moles (n) ÷ volume (V)
Based on the information given in this question,
Volume of soda (V) = 9.13 L
number of moles = 13.83 mol
Molarity = 13.83 ÷ 9.13
Molarity = 1.52 M
Reaction B: 2 H2O2 (aq) + 2 H20 (L) + O2 (g)
10. Identify the reactants in Reaction B.
11. Identify the products in Reaction B.
12. How many molecules are present on the reactant side of the equation?
13. How many molecules are present on the product side of the equation?
Answer: 10. The reactant in Reaction B is [tex]H_{2}O_{2}[/tex].
11. The products in Reaction B are [tex]H_{2}O[/tex] and [tex]O_{2}[/tex].
12. There are 2 molecules present on the reactant side of the equation.
13. There are 3 molecules present on the product side of the equation.
Explanation:
The given reaction equation is as follows.
[tex]Reaction B: 2H_{2}O_{2}(aq) \rightarrow 2H_{2}O(l) + O_{2}(g)[/tex]
Reactants are the species present on the left side of a chemical equation.
Products are the species present on the right side of a chemical equation.
Therefore, the reactant in Reaction B is [tex]H_{2}O_{2}[/tex]. As 2 is coefficient of [tex]H_{2}O_{2}[/tex] so, 2 molecules are present on the reactant side of the equation.
The the products in Reaction B are [tex]H_{2}O[/tex] and [tex]O_{2}[/tex]. The coefficient of [tex]H_{2}O[/tex] is 2 and coefficient of [tex]O_{2}[/tex] is 1. Hence, there are total (2 + 1) equals to 3 molecules present on the product side of the equation.
Thus, we can conclude that:
The reactant in Reaction B is [tex]H_{2}O_{2}[/tex].
The products in Reaction B are [tex]H_{2}O[/tex] and [tex]O_{2}[/tex].
There are 2 molecules present on the reactant side of the equation.
There are 3 molecules present on the product side of the equation.
(part 1 of 3) Copper reacts with silver nitrate through a single replacement. If 1.29 g of silver are produced from the reaction, how much copper(II) nitrate is also produced? Answer in units of mol. (part 2 of 3) How much Cu is required in this reaction? Answer in units of mol. (part 3 of 3) 1.0 points How much AgNO3 is required in this reaction? Answer in units of mol.
Answer:
See explanation.
Explanation:
Hello there!
In this case, according to the described chemical reaction, we first write the corresponding equation to obtain:
[tex]Cu+2AgNO_3\rightarrow 2Ag+Cu(NO_3)_2[/tex]
Thus, we proceed as follows:
Part 1 of 3: here, since the molar mass of silver and copper (II) nitrate are 107.87 and 187.55 g/mol respectively, and the mole ratio of the former to the latter is 2:1, we can set up the following stoichiometric expression:
[tex]m_{Cu(NO_3)_2}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu(NO_3)_2}{2molAg}*\frac{187.55gCu(NO_3)_2}{1molCu(NO_3)_2} \\\\m_{Cu(NO_3)_2}=1.12gCu(NO_3)_2[/tex]
Part 2 of 3: here, the molar mass of copper is 63.55 g/mol and the mole ratio of silver to copper is 2:1, the mass of the former that was used to start the reaction was:
[tex]m_{Cu}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{1molCu}{2molAg}*\frac{63.55gCu)_2}{1molCu} \\\\m_{Cu}=0.380gCu[/tex]
Part 3 of 3: here, the molar mass of silver nitrate is 169.87 g/mol and their mole ratio 2:2, thus, the mass of initial silver nitrate is:
[tex]m_{AgNO_3}=1.29gAg*\frac{1molAg}{107.87gAg}*\frac{2molAgNO_3}{2molAg}*\frac{169.87gAgNO_3}{1molAgNO_3} \\\\m_{AgNO_3}=2.03gAgNO_3[/tex]
Best regards!
When writing the formulas for a compound that contains a polyatomic ion, ... ?
Answer:
The cation is written first in the name; the anion is written second in the name. Rule 2. When the formula unit contains two or more of the same polyatomic ion, that ion is written in parentheses with the subscript written outside the parentheses.
When writing the formula of a compound that contains polyatomic ion, the metal is written first followed by the central atom in the ion and then other atoms that surround the central atom.
A poly atomic ion refers to an ion that comprises of more than one atom. Such ions are common in chemistry. Examples of polyatomic ions include; PO4^3-, BH4^- etc.
When writing the formula of a compound that contains a polyatomic ion, the metal is written first then the central atom in the ion follows before other atoms that surround the central atom in the ion.
Learn more: https://brainly.com/question/6284546