Answer:
f = 25 Hz
Explanation:
We know that :
[tex]v = f*d\\=> f = \frac{v}{d}[/tex] where f = frequency ; v = speed & d = wavelength
Here in the question ,
Speed = 2500 m/s
Wavelength = 100 m
Using the above formula ,
Frequency = [tex]\frac{2500}{100} = 25 Hz[/tex]
Convert 2536 mm/min to m/s. Use dimensional analysis.
Answer:
As we know that,
1 mm/min = 1.66667E-5 m/s1 m/s = 60000 mm/minNow, come to the question -
[tex] \\ \implies \sf \: 2536 \times 1.66667E-5 m/s \\ \\ \\ \implies \sf \blue{0.0422666667 \:m/s } \\ [/tex]
Result : 2536 mm/min = 0.0422666667 m/s.
A car travels 82 meters do North and 14 seconds the car turns around and travels 44 m due south in four seconds what is the magnitude of the average velocity of the car during the full travel time?
Answer:
2.11 m/s
Explanation:
Take north to be positive and south to be negative.
Average velocity = displacement / time
v = (82 m + -44 m) / (14 s + 4 s)
v = 2.11 m/s
The velocity is positive, so it is 2.11 m/s north. The magnitude of the velocity is 2.11 m/s.
I need with the basic understanding of this
Answer:
A = air resistance
B = lift
C = thrust
D = gravity
1.00 N, 2.86° above horizontal
Explanation:
Gravity pulls down on the bird. The thrust of the birds wings push it forward, and the lift pushes it up. Air resistance pushes it back.
The net force in the y direction is:
∑Fᵧ = lift − gravity
∑Fᵧ = 0.20 N − 0.15 N
∑Fᵧ = 0.05 N
The net force in the x direction is:
∑Fₓ = thrust − air resistance
∑Fₓ = 1.50 N − 0.50 N
∑Fₓ = 1.00 N
The magnitude of the resultant force is:
F² = Fₓ² + Fᵧ²
F² = (1.00 N)² + (0.05 N)²
F ≈ 1.00 N
The direction of the resultant force is:
tan θ = Fᵧ / Fₓ
tan θ = (0.05 N) / (1.00 N)
θ = 2.86° above horizontal
Oppositely charged parallel plates are separated by 4.49 mm. A potential difference of 600 V exists between the plates. (a) What is the magnitude of the electric field between the plates? N/C (b) What is the magnitude of the force on an electron between the plates? N (c) How much work must be done on the electron to move it to the negative plate if it is initially positioned 3.14 mm from the positive plate?
Answer:
A. Using
E=V/d
= 600/4.49*10^-3
= 1.336 x10^5 N/C
b) F = E*q = 1.33610^5 x 1.6*10^-19
= 2.17 x 10^-14 N
c) Work = Fs distance = 2.17 x 10^-14 N (4.49-3.14)*.001= 1.35 x 10^-17 J
Hitting a ball off a tee would be considered which of the following?
A.
A closed serial skill
B.
An open continuous skill
C.
An open discrete skill
D.
A closed discrete skill
The position of a particle
Answer:
vector
Explanation:
The position of a particle is vector
How fast do you go if you move 80 meters in 0.20 seconds?
Answer: I HOPE IT HELPS
Use this Speed Calculator to calculate the speed you have travelled based ... (so add three 0s to your kilometres to get metres) and a mile is 1609 metres. ... You will have distance per time such as kilometres per hour or metres per second. ... If you want help with that, click on hyperlink for metres or for minutes and seconds.
Explanation:
Understand that the acceleration vector is in the direction of the change of the velocity vector. In one dimensional (straight line) motion, acceleration is accompanied by a change in speed, and the acceleration is always parallel (or antiparallel) to the velocity. When motion can occur in two dimensions (e.g. is confined to a tabletop but can lie anywhere in the x-y plane), the definition of acceleration is
Answer:
a = √ (a_t² + a_c²)
a_t = dv / dt , a_c = v² / r
Explanation:
In a two-dimensional movement, the acceleration can have two components, one in each axis of the movement, so the acceleration can be written as the components of the acceleration in each axis.
a = aₓ i ^ + a_y j ^
Another very common way of expressing acceleration is by creating a reference system with a parallel axis and a perpendicular axis. The axis called parallel is in the radial direction and the perpendicular axis is perpendicular to the movement, therefore the acceleration remains
a = √ (a_t² + a_c²)
where the tangential acceleration is
a_t = dv / dt
the centripetal acceleration is
a_c = v² / r
Question: A) A car is driving too fast on a flat non-banked curve. The car cannot stay on the road. What path will the car take as it leaves the road? See Image. (a) (b) B) The driver wants to go faster around the same curve mentioned above and not run off the road. He adds sandbags to his car to make it weigh more so that the friction force between the tires and the road will be increased. Will this work? Explain your answer.
Explanation:
(a) The car will leave tangentially to the road, so it will take path d.
(b) Sum of forces on the car in the vertical direction:
∑F = ma
N − mg = 0
N = mg
Sum of forces on the car in the centripetal direction:
∑F = ma
Nμ = m v²/r
mgμ = m v²/r
gμ = v²/r
v = √(grμ)
The maximum velocity is independent of mass, so adding sandbags will not work.
The mass of a string is 20 g and it has a length of 3.2 m. Assuming that the tension in the string is 2.5 N, what will be the wavelength of a travelling wave that is created by a sinusoidal excitation of this string with a frequency of 20 Hz. Provide the wavelength in units of m. Please note: You do not include the units in your answer. Just write in the number.
Answer:
The wavelength of the wave is 1 m
Explanation:
Given;
mass of the string, m = 20 g = 0.02 kg
length of the string, L = 3.2 m
tension on the string, T = 2.5 N
the frequency of the wave, f = 20 Hz
The velocity of the wave is given by;
[tex]v = \sqrt\frac{T}{\mu} {}[/tex]
where;
μ is mass per unit length = 0.02 kg / 3.2 m
μ = 6.25 x 10⁻³ kg/m
[tex]v = \sqrt{\frac{T}{\mu} } \\\\v = \sqrt{\frac{2.5}{6.25*10^{-3}} } \\\\v = 20 \ m/s[/tex]
The wavelength of the wave is given by;
λ = v / f
λ = (20 m/s )/ (20 Hz)
λ = 1 m
Therefore, the wavelength of the wave is 1 m
The rain gauge has 2 inches of precipitation.
Qualitative or Quantitative
Answer:
Quantitative is the correct term
One of the specific goals of of environmental analysis is:____________
a: To provide organized information, for the development of the organization's internal analysis, mission, vision , values and strategy.
b: To measure organizational efficiency.
c: To ignore minor competitors.
d: To develop a list of "one-word: descriptions of the external environment.
Answer:
a: To provide organized information, for the development of the organization's internal analysis, mission, vision, values, and strategy.
Explanation:
Environmental analysis is a process in business wherein the internal and external factors that can affect a business are examined so as to help improve the organization's goals and strategies. The internal analysis serves as a guide to checkmate the organization and to see if they have adopted the right strategies that suit their external environment.
Competitors in the external environment can have a huge impact on the business. So the internal workings of the organization should align with the external factors. The organized information would also be useful in forecasting the growth of the business.
Consider the displacement vectors Ā=(i +6j)m, B = (3i– 7j)m,
If A-B-4D=0, what are the components of D? (Dx = ?, and Dy = ?)
Answer:
Dx = -0.5
Dy = -0.25
Explanation:
Two vectors are given in rectangular components form as follows:
A = i + 6j
B = 3i - 7j
It is also given that:
A - B - 4D = 0
so, we solve this to find D vector:
(i + 6j) - (3i - 7j) - 4D = 0
- 2i - j = 4D
D = - (2/4)i - (1/4)j
D = - (1/2)i - (1/4)j
D = - 0.5i - 0.25j
Therefore,
Dx = -0.5
Dy = -0.25
- Over the weekend you go for an urban hike, traveling 3 miles north then 4 miles west before stopping to take a break. If this hike takes 1 hour, what is your average velocity during that time? - You leave your house to go for a drive to clear your head, driving 10 miles over the course of 30 minutes before arriving back home. What is your average velocity?
Answer:
A.) 5 mph
B.) 20 mph
Explanation:
Given that you are traveling 3 miles north then 4 miles west before stopping to take a break. If this hike takes 1 hour,
Let's first calculate the displacement be using pythagorean theorem
D = sqrt ( 3^2 + 4^2 )
D = sqrt ( 9 + 16 )
D = sqrt ( 25 )
D = 5
Average velocity = displacement/time
Average velocity = 5/1
Average velocity = 5 mph
Therefore, your average velocity during that time is 5 mph
- You leave your house to go for a drive to clear your head, driving 10 miles over the course of 30 minutes before arriving back home.
Average velocity = 10/ 0.5
Average velocity = 20 mph
Which is a benefit of using synthetic polymers, such as nylon?
Synthetic polymers are lightweight.
O Synthetic polymers are produced in small
quantities.
Synthetic polymers are biodegradable.
Synthetic polymers are inexpensive to recycle.
Answer: Synthetic polymers are lightweight.
Explanation:
A benefit of using synthetic polymers is the fact that synthetic polymers are lightweight.
A polymer is a molecule composed of many repeating subunits.
Synthetic polymers are artificial polymers created by humans.
Most of the synthetic polymers are not biodegradable (unlike natural fibers such as cotton).
Synthetic polymers are classified according to their use into plastics, elastomers and synthetic fibers.
The advantages of synthetic polymers include: hard to break, being lightweight, and they last for a long time.
In conclusion, a benefit of using synthetic polymers is the fact that synthetic polymers are lightweight.
Learn more in:
https://brainly.com/question/4047007?referrer=searchResults
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) W
Complete question is;
A fisherman’s boat moves up and down periodically due to water waves. The boat travels from its highest to its lowest point, a vertical distance of 0.60 m, in 2.0 s. The horizontal distance between wave crests is 7.0 m. (a) What is the period of the wave motion? (b) What is the frequency of the wave motion? (c) What is the amplitude of each wave
Answer:
A) Period = 4 s
B) Frequency = 0.25 Hz
C) Amplitude = 0.3 m
Explanation:
A) We are told that the distance it takes for the boat to travel from its highest to its lowest point is 2 s.
Thus, t = 2 s
Now, in waves, period (T) it the time between two successive waves.
This means that;
T = 2t
T = 2 × 2
T = 4 s
B) Also, the frequency(f) is given by the formula;
f = 1/T
f = 1/4
f = 0.25 Hz
C) We are given a vertical distance of 0.60 m from highest to lowest point of waves.
Now, amplitude is half of this distance.
Thus;
Amplitude(A) = 0.6/2
A = 0.3 m
The Shinkansen (bullet train in Japan) makes a trip from Tokyo Station to Kyoto station in 2 hours and 14 min. The distance traveled is 460 km (to two significant figures). Determine the average velocity of the train in meters per second (m/s). [conversions: 1 km = 1000 m, 1 hr = 60 min, 1 min = 60 s] *
Answer:
v = 57.2 m/s
Explanation:
The average velocity of the train can be defined as the total distance covered by the train divided by the time taken by the train to cover that distance. Therefore, we will use the following formula to find the average velocity of the train:
v = s/t
where,
s = distance covered = 460 km = (460 km)(1000 m/1 km) = 4.6 x 10⁵ m
t = time taken to cover the distance = 2 h 14 min
Now, we convert it into minutes:
t = (2 h)(60 min/1 h) + 14 min
t = 120 min + 14 min = (134 min)(60 s/1 min)
t = 8040 s
Therefore, the value of velocity will be:
v = (4.6 x 10⁵ m)/8040 s
v = 57.2 m/s
A car starts at 80 m/s but sees a cop and hits the brakes slowing down to 50 m/s in 2 sec.
Answer:
-15m/s/s
Explanation:
Acceleration = change in speed/ change in time
The change in speed is calculated by subtracting the initial speed from the final speed, so the change in speed is: 50 - 80 = -30m/s. The change in time is 2 - 0 = 2.
So the car acceleration is -30/2 = -15m/s/s
It is negative because it is decelerating.
Hope this helped!
What is the speed of an object that travels 20 meters in 4 seconds?
Given:-
Distance covered by the particle (s) = 20 mTime taken (t) = 4 secondsTo Find: Speed of it.
We know,
v = s/t
where,
v = Speed,s = Distance &t = Time taken.Putting the values,
v = (20 m)/(4 s)
→ v = 5 m/s (Ans.)
The speed of an object will be "5 m/s".
The given values are:
Distance,
d = 20 mTime,
t = 4 secondsAs we know, the formula:
→ [tex]Distance (d)= Speed (v)\times Time (t)[/tex]
or,
→ [tex]Speed (v) = \frac{Distance (d)}{Time (t)}[/tex]
By putting the values, we get
→ [tex]= \frac{20}{4}[/tex]
→ [tex]= 5 \ m/s[/tex]
Thus the above answer is correct.
Learn more:
https://brainly.com/question/18660562
the graph shows position versus time for an object moving with the constant acceleration. what is the final velocity of the object at t=10s? assume the initial velocity at the origin is 1 m/s.
3.32 m/s
4.0 m/s
3.0 m/s
3.8 m/s
Answer:
3.0 m/s
Explanation:
The equation of motion for constant acceleration (a) is ...
[tex]x(t)=\dfrac{1}{2}at^2 +v_0t+x_0[/tex]
The problem statement tells us v₀ = 1, and we read from the graph that x₀=1. We also read from the graph that x(10) = 21. Filling these values into the equation, we can find a and x'(10).
[tex]21 = \dfrac{1}{2}a(10^2)+1(10)+1\\\\10=50a\qquad\text{subtract 11}\\\\a=\dfrac{1}{5}\\\\x'(t)=at+v_0\\\\x'(10)=\dfrac{1}{5}\cdot 10+1=3.0[/tex]
The final velocity of the object at t=10 s is about 3.0 m/s.
_____
Comment on the graph
We note this graph better represents increasing acceleration than it does constant acceleration. x(2) = 3.4 per the equation. It is graphed as about 4.
Answer:
thanks for de points
Explanation:
An elevator held by a single cable is ascending but slowing down. Is the work done by tension positive, negative, or zero? What about the work done by gravity? Explain
Explanation:
1.) Work = Force*Distance
2.) The direction of motion lies in the same direction as the tension in the cable. So the work done by tension would be positive.
3.) The direction of the weight (due to gravity) would act opposite to the direction of motion of the elevator, so work done by gravity becomes negative.
What is a statement ?
A car travels 20 meters east
in 1.0 second and then travels
10 meters west in 20 seconds. The
displacement of the car at the end
of this 3.0-second interval is-
Answer:
Alright the other day.
5. Why does a properly adjusted head restraint help prevent head and neck injuries to occupants in
rear-end collisions? Explain your answer in terms of the law of conservation of momentum.
Answer:
Have you tried google
Explanation:
Answer:
protect against whisplasg injuries
ball is thrown vertically upward from an initial position 5m above the ground. At the same time, a cube is released from rest down aslippery incline, from an unknownheight. The two objects reach the ground at the same instant, and both have a final speed of 15m/s. What is the angle ofthe incline
Answer:
The value is [tex]\theta = 34.8 ^o[/tex]
Explanation:
Generally the time it takes the ball to move from maximum height to the ground is
[tex]t = \frac{v - u}{g}[/tex]
Here u= 0 m/s and v = 15 m/s
So
[tex]t = \frac{15 - 0}{9.8}[/tex]
=> [tex]t = 1.53 \ s [/tex]
Generally the maximum height traveled in time t is mathematically represented as
[tex]s = u * t + \frac{1}{2} * g * t^2[/tex]
=> [tex]s = 0 * 1.53 + \frac{1}{2} * 9.8 * 1.53^2[/tex]
=> [tex]s = 11.5 \ m [/tex]
The interval in distance between the maximum height and the initial position of the ball is
[tex]d = s - k[/tex]
Here k = 5 m (given)
[tex]d = 11.5 - 5[/tex]
[tex]d = 6.5 \ m [/tex]
Generally from the kinematic equation we have that
[tex]d = ut_1 + \frac{1}{2} g * t_1 ^2[/tex]
Here [tex] t_1 [/tex] is the time taken to travel through d
[tex]t_1 = \sqrt{ \frac{2 * d }{g} }[/tex]
=> [tex]t_1 = \sqrt{ \frac{2 * 6.5 }{9.8} }[/tex]
=> [tex]t_1 = 1.15 \ s [/tex]
Generally the total time for this fight is mathematically represented as
[tex]t_f = t + t_1[/tex]
=> [tex]t_f = 1.15 + 1.53[/tex]
=> [tex]t_f = 2.68 \ s [/tex]
Generally the vertical force exerted on the cube is mathematically represented as
[tex]F = m * g * sin (\theta )[/tex]
=> [tex] m * a = m * g * sin (\theta )[/tex]
=> [tex] a = g * sin (\theta )[/tex]
Now a is mathematically represented as
[tex]a = \frac{v - u }{t_f}[/tex]
=> [tex]a = \frac{15 - u }{2.68}[/tex]
=> [tex]a = 5.597 \ m/s^2[/tex]
So
[tex] 5.597 = 9.8 * sin (\theta )[/tex]
[tex]\theta = sin^{-1} [\frac{5.597}{9.8} ][/tex]
[tex]\theta = 34.8 ^o[/tex]
What are some reasons people may not prepare to be safe and comfortable when they participate in physical activity?
Answer: ummm arent you in my physical fundations class lol
Explanation:
are you or am i tripping? and sorry i dont have the answer :(
Common reasons people give for not being active include not having enough time, finding physical activity inconvenient, lacking self-motivation, etc.
What is physical activity?Any consensual bodily mobilization generated by skeletal muscles that necessitate caloric expenditure is characterized as physical activity.
Physical activity includes all activities of any frequency, at any moment of day or night. It incorporates both strength training and incidental activity into the daily routine.
Physical activity can improve your brain health, help you manage your weight, lower your risk of disease, strengthen your bones and muscles, and improve your ability to do everyday tasks.
Adults who sit less and engage in moderate-to-vigorous physical activity reap health benefits.
Internal barriers were classified into three types namely, a lack of energy, a lack of motivation, and a lack of self-efficacy.
External barriers were also classified into three categories namely a lack of resources, a lack of social support, and a lack of time.
Thus, these are some reasons that may not prepare to be safe and comfortable when they participate in physical activity
For more details regarding physical activity, visit:
https://brainly.com/question/14338730
#SPJ2
An automobile is driven on a straight road, and the distance traveled by the automobile after time t=0 is given by a quadratic function a where a(t) is measured in feet and t is measured in seconds for 0 <= t <= 12. Of the following, which gives the best estimate of the velocity of the automobile, in feet per second, at time t = 8 seconds?
a. s(8)
b. s(8)/8
c. s(12)- s(2)/ 12-2
d. s(9)- s(7)/9-7
Answer:
[tex]Velocity = \frac{s(8)}{8}[/tex]
Explanation:
Given
[tex]0 \leq t \leq 12[/tex]
Required
Determine the velocity when t = 8
This type of velocity is referred to as an instantaneous velocity.
In this case, it is calculated using
[tex]Velocity = \frac{Distance\ at\ 8 second}{t = 8}[/tex]
Given that s(t) models the distance;
s(8) = distance at 8 seconds
So;
[tex]Velocity = \frac{s(8)}{8}[/tex]
Option B answers the question
Which of these is caused by the interaction between the atmosphere and the hydrosphere?
Answer:
Explanation: All the spheres interact with other spheres. For example, rain (hydrosphere) falls from clouds in the atmosphere to the lithosphere and forms streams and rivers that provide drinking water for wildlife and humans as well as water for plant growth (biosphere).
What is normalization
Answer:
Normalization is a systematic approach of decomposing tables to eliminate data redundancy. It is a multi-step process that puts data into tabular form, removing duplicated data from the relation tables.
Explanation:
Answer:
the process of bringing or returning something to a normal condition or state.
Explanation:
In "your own words"- Normalization is when you change something back into it's average form.
What is the volume of a marble with a diameter of 3.0
Explanation:
You can solve for volume using radius or diameter.
Sphere Volume = 4/3 • π • r³ = ( π •d³)/6
We're given the diameter so let's use that.
Volume = PI * d^3 / 6
Volume = 3.14159 * 3.0^3 / 6
Volume = 3.14159 * 9 / 2
Volume = 14.137 cubic centimeters