Answer:
pH = 3.39
Explanation:
The equilibrium in water of ascorbic acid (With its conjugate base) is:
H₂C₆H₆O₆(aq) + H₂O(l) ⇄ HC₆H₆O₆⁻(aq) + H₃O⁺(aq)
Where the acidic dissociation constant is written as:
Ka = 7.9x10⁻⁵ = [HC₆H₆O₆⁻] [H₃O⁺] / [H₂C₆H₆O₆]
H₂O is not taken in the Ka expression because is a pure liquid.
As initial concentration of H₂C₆H₆O₆ is 2.5x10⁻³M, the equilibrium concentration of each species in the equilibrium is:
[H₂C₆H₆O₆] = 2.5x10⁻³M - X
[HC₆H₆O₆⁻] = X
[H₃O⁺] = X
Replacing in the Ka expression:
7.9x10⁻⁵ = [X] [X] / [2.5x10⁻³M - X]
1.975x10⁻⁷ - 7.9x10⁻⁵X = X²
0 = X² + 7.9x10⁻⁵X - 1.975x10⁻⁷
Solving for X:
X = -0.00048566→ False solution, there is no negative concentrations
X = 0.00040666 → Right solution
As [H₃O⁺] = X, [H₃O⁺] = 0.00040666
pH is defined as -log [H₃O⁺];
pH = -log 0.00040666,
pH = 3.39. Explain why, in the sample calculations, 0.1 g of the unknown produced a GREATER freezing point depression than~e same mass of naphthalene.
Answer
Naphthalene is a non electrolyte
If the unknown compound is an electrolyte it gives 2 or more ions in solution
( NaCl >> Na+ + Cl- => 2 ions
Ca(NO3)2 >> Ca2+ + 2 NO3- => 3 ions)
the f.p. lowering is directly proportional to the molal concentration of dissolved ions in the solution )
For naphthalene
delta T = 1.86 x m
for a salt that gives 2 ions
delta T = 1.86 x m x 2
hence the lowering in freezion point of unkown is greater then napthalene
How many valence electrons are in the electron dot structures for the elements in group 3A(13)?
Answer:
here, as we have known the elements of group 3A(13) such as aluminium , boron has three valance electron and in perodic table the elements are kept with similar proterties in same place so, their valance electron is 3.
hope it helps...
The number of valence electrons are in the electron dot structures for the elements in group 3A(13) is three.
What are Groups in the Periodic Table?The periodic table is organized into groups (vertical columns), periods (horizontal rows), and families (groups of elements that are similar). Elements in the same group have the same number of valence electrons.
Groups are the columns of the periodic table, and periods are the rows. There are 18 groups, and there are 7 periods plus the lanthanides and actinides.
There are two different numbering systems that are commonly used to designate groups, and you should be familiar with both.
The traditional system used in the United States involves the use of the letters A and B. The first two groups are 1A and 2A, while the last six groups are 3A through 8A. The middle groups use B in their titles.
Therefore, The number of valence electrons are in the electron dot structures for the elements in group 3A(13) is three.
Learn more about Groups in the periodic table, here:
https://brainly.com/question/30858972
#SPJ3
A volumetric flask contains 25.0 mL of a 14% m/V sugar solution. If 2.5 mL of this solution is added to 22.5 mL of distilled water, what is the % m/V of the new solution.
Answer:
The new solution is 1.4% m/V
Explanation:
The concentration of the new solution, obtained by adding 22.5 mL of distilled water to 2.5 mL of 14 % m/V sugar solution, is 1.4% m/V.
We have 2.5 mL (V₁) of a concentrated solution and add it to 22.5 mL of distilled water. Assuming the volumes are additives, the volume of the new solution (V₂) is:
[tex]2.5 mL + 22.5 mL = 25.0 mL[/tex]
We want to prepare a dilute solution from a concentrated one, whose concentration is 14% m/V (C₁). We can calculate the concentration of the dilute solution (C₂) using the dilution rule.
[tex]C_1 \times V_1 = C_2 \times V_2\\C_2 = \frac{C_1 \times V_1}{V_2} = \frac{14\% m/V \times 2.5 mL}{25.0 mL} = 1.4 \% m/V[/tex]
The concentration of the new solution, obtained by adding 22.5 mL of distilled water to 2.5 mL of 14 % m/V sugar solution, is 1.4% m/V.
You can learn more about dilution here: https://brainly.com/question/13844449
A 0.4647-g sample of a compound known to contain only carbon, hydrogen, and oxygen was burned in oxygen to yield 0.01962 mol of CO2 and 0.01961 mol of H2O. The empirical formula of the compound was found to be C3H6O2. Show how this was calculated.
What does the empirical formula tell you about the compound?
The molar mass of the actual compound was found to be 222.27g/mol. Find the molecular formula of this compound. What does the molecular formula tell you about the compound?
Can you see what type of functional group this compound could have?
Answer:
See explanation.
Explanation:
Hello,
In this case, we can show how the empirical formula is found by following the shown below procedure:
1. Compute the moles of carbon in carbon dioxide as the only source of carbon at the products:
[tex]n_C=0.01962molCO_2*\frac{1molC}{1molCO_2} =0.01962molC[/tex]
2. Compute the moles of hydrogen in water as the only source of hydrogen at the products:
[tex]n_H=0.01961molH_2O*\frac{2molH}{1molH_2O}=0.03922molH[/tex]
3. Compute the mass of oxygen by subtracting the mass of both carbon and hydrogen from the 0.4647-g sample:
[tex]m_O=0.4647g-0.01962molC*\frac{12gC}{1molC}-0.03922molH*\frac{1gH}{1molH} =0.1900gO[/tex]
4. Compute the moles of oxygen by using its molar mass:
[tex]n_O=0.1900gO*\frac{1molO}{16gO}=0.01188molO[/tex]
5. Divide the moles of carbon, hydrogen and oxygen by the moles of oxygen (smallest one) to find the subscripts in the empirical formula:
[tex]C=\frac{0.01962}{0.01188}=1.65\\ \\H=\frac{0.03922}{0.01188} =3.3\\\\O=\frac{0.01188}{0.01188} =1[/tex]
6. Search for the closest whole number (in this case multiply by 2):
[tex]C_3H_6O_2[/tex]
Moreover, the empirical formula suggests this compound could be carboxylic acid since it has two oxygen atoms, nevertheless, this is not true since the molar mass is 222.27 g/mol, therefore, we should compute the molar mass of the empirical formula, that is:
[tex]M=12*3+1*6+16*2=74g/mol[/tex]
Which is about three times in the molecular formula, for that reason, the actual formula is:
[tex]C_9H_{18}O_6[/tex]
It suggest that the compound has a highly oxidizing character due to the presence of oxygen, therefore, we cannot predict the distribution of the functional groups as it could contain, carboxyl, carbonyl, hydroxyl or even peroxi.
Best regards.
A constant volume and mass of helium gas at 77°C is heated so that the pressure of the gas doubles. What is the new temperature of the gas in Celsius degrees?
Answer:
427°C .
Explanation:
Step 1:
Data obtained from the question. This include the following:
Initial temperature (T1) = 77°C
Initial pressure (P1) = P
Final pressure (P2) = 2P
Final temperature (T2) =?
Step 2:
Conversion of celsius temperature to Kelvin temperature.
This is illustrated below:
T(K) = T (°C) + 273
Initial temperature (T1) = 77°C
Initial temperature (T1) = 77°C+ 273 = 350K
Step 3:
Determination of the new temperature. The new temperature can be obtained as follow:
P1/T1 = P2/T2
P/350 = 2P/T2
Cross multiply
P x T2 = 350 x 2P
Divide both side by P
T2 = (350 x 2P ) / P
T2 = 700K
Step 4:
Conversion of Kelvin temperature to celsius temperature.
This can be obtained as follow:
T(°C) = T(K) – 273
T(K) = 700K
T(°C) = 700 – 273
T(°C) = 427°C
Therefore, the new temperature of the gas is 427°C
Calculate the work (kJ) done during a reaction in which the internal volume expands from 28 L to 51 L against an outside pressure of 4.9 atm.
Answer:
W= -11KJ
Explanation:
Given:
volume expands from 28 L to 51 L
pressure =4.9 atm.
We will need to Convert the pressure to Pascal SI
But 1 atm = 101,325 Pa.
Then,
Pressure= (4.9*101323)/1atm = 5*10^5 pa
Then we need to Convert the volumes to cubic meters
But we know that1 m³ = 1,000 L.
V1= 28L * 1m^3/1000L = 0.028m^3
V2=51L × 1m^3 /1000L =0.051m^3
The work done during the expansion of a gas can be calculated as
W= -P(V2-V1)
W= - 5*10^5(0.051m^3 - 0.028m^3)
W= -1.1× 10^4J
Then we can Convert the work to kiloJoule
But1 kJ = 1,000 J.
W= -1.1× 10^4J× 1kj/1000J
= -11KJ
If the vinegar were measured volumetrically (e.g., a pipet), what additional piece of data would be needed to complete the calculations for the experiment?
Answer:
the density if vinegar will also be needed
Explanation:
Because this is an experiment of volumetric analysis
Calculate the percent ionization of nitrous acid in a solution that is 0.249 M in nitrous acid. The acid dissociation constant of nitrous acid is
Answer:
4.26 %
Explanation:
There is some info missing. I think this is the original question.
Calculate the percent ionization of nitrous acid in a solution that is 0.249 M in nitrous acid. The acid dissociation constant of nitrous acid is 4.50 × 10 ⁻⁴.
Step 1: Given data
Initial concentration of the acid (Ca): 0.249 M
Acid dissociation constant (Ka): 4.50 × 10 ⁻⁴
Step 2: Write the ionization reaction for nitrous acid
HNO₂(aq) ⇒ H⁺(aq) + NO₂⁻(aq)
Step 3: Calculate the concentration of nitrite in the equilibrium ([A⁻])
We will use the following expression.
[tex][A^{-} ] = \sqrt{Ca \times Ka } = \sqrt{0.249 \times 4.50 \times 10^{-4} } = 0.0106 M[/tex]
Step 4: Calculate the percent ionization of nitrous acid
We will use the following expression.
[tex]\alpha = \frac{[A^{-} ]}{[HA]} \times 100\% = \frac{0.0106M}{0.249} \times 100\% = 4.26\%[/tex]
An electrode has a negative electrode potential. Which statement is correct regarding the potential energy of an electron at this electrode?
A. An electron at this electrode has the same potential energy as it has at a standard hydrogen electrode.
B. An electron at this electrode has a lower potential energy than it has at a standard hydrogen electrode.
C. An electron at this electrode has a higher potential energy than it has at a standard hydrogen electrode.
Answer:
C. An electron at this electrode has a higher potential energy than it has at a standard hydrogen electrode.
Explanation:
The standard hydrogen electrode (SHE) is used to measure the electrode potential of substances. The standard hydrogen electrode is arbitrarily assigned an electrode potential of zero. Recall that electrode potentials are always measured as reduction potentials in electrochemical systems.
For an electrode that has a negative electrode potential, electrons at this electrode have a higher potential energy compared to electrons at the standard hydrogen electrode. Electrons flow from this electrode to the hydrogen electrode.
On the other hand, a positive electrode potential implies that an electron at this electrode has a lower potential energy than it has at a standard hydrogen electrode. Hence electrons will flow from the standard hydrogen electrode to this electrode.
For the reaction 2 A - Products, the concentration of A is monitored over time. A graph of [A] versus time was found to be linear, with a negative slope. Select the true statement regarding this reaction.
A) The reaction is first order with respect to A.
B) The reaction is second order with respect to A.
C) The rate constant has a negative value.
D) In 2 The reaction has a half-life equal to k.
E) None of these statements is true.
Answer:
none of these statements is true
according to the question E) None of these statements is true.
What is a concentration in chemistry?The concentration of a chemical substance expresses the amount of a substance present in a mixture. There are many different ways to express concentration. Chemists use the term solute to describe the substance of interest and the term solvent to describe the material in which the solute is dissolved
What is concentration in chemistry units?
Quantitative units of concentration include molarity, molality, mass percentage, parts per thousand, parts per million, and parts per billion.
Learn more about concentration here
https://brainly.com/question/24595796
#SPJ2
At 25.0°C the Henry's Law constant for methane CH4 gas in water is ×1.410−3/Matm.
Calculate the mass in grams of CH4 gas that can be dissolved in 75.mL of water at 25.0°C and a CH4 partial pressure of 0.68atm. Round your answer to 2 significant digits.
Answer:
1.1 × 10⁻³ g
Explanation:
Step 1: Given data
Henry's Law constant for methane (k): 1.4 × 10⁻³ M/atm
Volume of water (=volume of solution): 75 mL
Partial pressure of methane (P): 0.68 atm
Step 2: Calculate the concentration of methane in water (C)
We will use Henry's law.
[tex]C = k \times P = 1.4 \times 10^{-3}M/atm \times 0.68atm = 9.5 \times 10^{-4}M[/tex]
Step 3: Calculate the moles of methane in 75 mL of water
[tex]\frac{9.5 \times 10^{-4}mol}{L} \times 0.075 L = 7.1 \times 10^{-5}mol[/tex]
Step 4: Calculate the mass corresponding to 7.1 × 10⁻⁵ mol of methane
The molar mass of methane is 16.04 g/mol.
[tex]7.1 \times 10^{-5}mol \times \frac{16.04g}{mol} = 1.1 \times 10^{-3} g[/tex]
Classify each molecule by whether its real bond angles are the same as or different than its model (ideal) bond angles. In other words, do the bond angles change when you switch between Real and Model mode at the top of the page?
The question is incomplete; the complete question is: Classify each molecule by whether its real bond angles are the same as or different than its model (ideal) bond angles. In other words, do the bond angles change when you switch between Real and Model mode at the top of the page? Same (angles do not change) Different (angles change) Answer Bank | H2O | CO2, SO2, XeF2, BF3 CIF3, NH3, CH4, SF4, XeF4, BrF5, PCI5,SF6
Answer:
Compounds whose real bond angle are the same as ideal bond angle;
SF6, BF3, CH4, PCI5
Compounds whose real bond angles differ from ideal bond angles;
H2O, CO2, SO2, XeF2, CIF3, NH3, SF4, XeF4, BrF5
Explanation:
According to the valence shell electron pair repulsion theory (VSEPR), molecules adopt various shapes based on the number of electron pairs on the valence shell of the central atom of the molecule. The electron pairs usually orient themselves as far apart in space as possible leading to various observed bond angles.
The extent of repulsion of lone pairs is greater than that of bond pairs. Hence, the presence of lone pairs on the valence shell of the central atom in the molecule distorts the bond angles of molecules away from the ideal bond angles predicted on the basis of valence shell electron pair repulsion theory.
For instance, methane is a perfect tetrahedron having an ideal bond angle of 109°28'. Both methane and ammonia are based on a tetrahedron, however, the presence of a lone pair of electrons on nitrogen distorts the bond angle of ammonia to about 107°. The distortion of lone pairs in water is even more as the bond angles of water is about 104°.
How does the carbon calculator estimate the amount of CO2 that each individual releases into the atmosphere?
Answer:
The calculator add the CO2 released from the use of electricity, released from driving and the CO2 from the waste that we disposed.
Explanation:
The carbon dioxide, CO2 is what the human body does not need, therefore, we breathe it out, hence taking in oxygen(respiration process). The plants need oxygen for the production of their own food.
The carbon calculator estimate the amount of CO2 that each individual releases into the atmosphere through the consideration of several factors such as the kind of food that we eat.
Therefore, if we are to use the carbon calculator to determine the amount of CO2 that each individual releases into the atmosphere we will have:
The amount of CO2 that each individual releases into the atmosphere =( CO2 released from the use of electricity) + (CO2 released from driving) + (the CO2 from the waste that we disposed).
Which products are formed when aluminum is added to a silver chlorine solution?
Answer:
Alcl3 and Cl2
Explanation:
the product above will be formed
Answer:
silver (Ag) and aluminum chloride (AlCl₃)
Explanation:
The reaction between aluminum and silver chloride is a single replacement reaction. A single replacement reaction is when one element switches places with another.
Al + 3AgCl ➔︎ 3Ag + AlCl₃
In the reaction, the cations (positively charged ions) switch places. Aluminum (Al) switches places with Silver (Ag). So, the products of the reaction are silver and aluminum chloride.
Hope this helps.
Why does a new period start on the periodic table, instead of the row continuing? A. A new period starts when a new energy shell starts. B. A new period starts when a new neutron cycle starts. C. None of these D. It is based on how many protons it has.
Answer:
B
Explanation:
All the elements in a period have valence electrons in the same shell. The number of valence electrons increases from left to right in the period. When the shell is full, a new row is started and the process repeats.
A new period starts when a new neutron cycle starts. Hence, option B is correct.
What is the period in the periodic table?A period in the periodic table is a row of chemical elements. All elements in a row have the same number of electron shells.
All the elements in a period have valence electrons in the same shell.
The number of valence electrons increases from left to right in the period.
When the shell is full, a new row is started and the process repeats.
Hence, option B is correct.
Learn more about the period in the periodic table here:
https://brainly.com/question/3433177
#SPJ2
https://brainly.com/question/16061498?referrer=searchResults
Which of the following is NOT one of the types of bonds? A. Ionic B. Metallic C. Covalent D. Valence
Considering the definition of bond and the different type of bonds, valence is not one of the types of bonds.
What is a chemical bondA chemical bond is defined as the force by which the atoms of a compound are held together. These are electromagnetic forces that give rise to different types of chemical bonds.
In other words, a chemical bond is the force that joins atoms to form chemical compounds and confers stability to the resulting compound.
Covalent bondThe covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.
Ionic bondAn ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions.
Metallic bondMetallic bonds are a type of chemical bond that occurs only between atoms of the same metallic element. In this way, metals achieve extremely compact, solid and resistant molecular structures, since the atoms that share their valence electrons.
SummaryIn summary, valence is not one of the types of bonds. The types of bonds are covalent, ionic and metallic.
Learn more about chemical bonds:
https://brainly.com/question/25385832
https://brainly.com/question/13178368
#SPJ1
Determine the [OH⁻] concentration in a 0.344 M Ca(OH)₂ solution.
Answer:
[tex]0.688M[/tex]
Explanation:
Hello,
In this case, it is widely acknowledged that strong bases usually correspond to those formed with metals in groups IA and IIA which have relatively high activity and reactivity, therefore, when they are dissolved in water the following dissociation reaction occurs (for calcium hydroxide):
[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]
In such a way, for the same volume, we can compute the concentration of hydroxyl ions by simple stoichiometry (1:2 molar ratio):
[tex]0.344\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\0.688\frac{mol OH^-}{L}[/tex]
Or simply:
[tex]0.688M[/tex]
Regards.
Write the following isotope in nuclide notation: oxygen-14
Answer:
[tex]14\\8[/tex]O
Explanation:
The top number always represents the mass number.
The bottom number always represents the atomic number.
The element always goes after the numbers.
If charge is present, that comes after the element.
Which of the following is NOT a type of crystal structure? A. None of these B. Metallic C. Ionic D. Macromolecular (giant covalent)
Answer:
A. None of these.
Explanation:
A crystal structure is an arrangement of atoms or ions in a repeating three-dimensional array.
B. is wrong. Metal atoms, such as gold, arrange themselves into a crystal structure.
C. is wrong. Ionic solids, such as sodium chloride, arrange themselves into a crystal structure.
D. is wrong. Macromolecules (network solids), such as diamond, arrange themselves into a crystal structure.
The correct answer is None of these.
What is a crystal structure?A crystal structure is a three-dimensional collection of atoms or ions that repeats itself.Metal atoms(gold), Ionic solids (sodium chloride), and Macromolecules(network solids) arrange themselves into a crystal structure.Learn more about crystal structure here:-
https://brainly.com/question/23986315
#SPJ2
How many grams of CO are produced when 41.0 g of C reacts?
Answer:
95.7 g CO to the nearest tenth.
Explanation:
2C + O2 ---> 2CO
Using relative atomic masses:
24 g C produces 2*12 + 2*16 g CO.
So 41 g produces ( (2*12 + 2*16) * 41 ) / 24
= 95.7 g CO,
Erbium metal (Er) can be prepared by reacting erbium(III) fluoride with magnesium; the other product is magnesium fluoride. Write and balance the equation.
Answer:
2ErF3 + 3Mg → 2Er + 3MgF2
Explanation:
Erbium metal is a member of the lanthaniod series. It reacts with halogens directly to yield erbium III halides such as erbium III chloride, Erbium III fluoride etc.
Erbium metal (Er) can be prepared by reacting erbium(III) fluoride with magnesium; the products are erbium metal and magnesium fluoride. This is a normal redox process in which the Erbium metal is reduced while the magnesium is oxidized. The balanced reaction equation of this process is; 2ErF3 + 3Mg → 2Er + 3MgF2
A 32.3-gram sample of gas is found to have a volume of 1.9 liters at 301 K and 1.21 atm. What is the molar mass of this gas? Show all of the work used to solve this problem.
Answer:
351.1g/mol
Explanation:
you can find the answer using The ideal gas equation
n= PV/RT
n=(1.21*1.9/0.082*301)mol
n=0.092 mol
molar mass=Mass/mole
m=32.3g/0.092mol
m=351.1g/mol
Determine the radius of an Al atom (in pm) if the density of aluminum is 2.71 g/cm3 . Aluminum crystallizes in a face centered cubic structure with an edge leng
Answer:
143pm is the radius of an Al atom
Explanation:
In a face centered cubic structure, FCC, there are 4 atoms per unit cell.
First, you need to obtain the mass of an unit cell using molar mass of Aluminium and thus, obtain edge length and knowing Edge = √8R you can find the radius, R, of an Al atom.
Mass of an unit cell
As 1 mole of Al weighs 26.98g. 4 atoms of Al weigh:
4 atoms × (1mole / 6.022x10²³atoms) × (26.98g / mole) = 1.792x10⁻²²g
Edge length
As density of aluminium is 2.71g/cm³, the volume of an unit cell is:
1.792x10⁻²²g × (1cm³ / 2.71g) = 6.613x10⁻²³cm³
And the length of an edge of the cell is:
∛6.613x10⁻²³cm³ = 4.044x10⁻⁸cm = 4.044x10⁻¹⁰m
Radius:
As in FCC structure, Edge = √8 R, radius of an atom of Al is:
4.044x10⁻¹⁰m = √8 R
1.430x10⁻¹⁰m = R.
In pm:
1.430x10⁻¹⁰m ₓ (1x10¹²pm / 1m) =
143pm is the radius of an Al atomThe radius of the atom of Al in the FCC structure has been 143 pm.
The FCC lattice has been contributed with atoms at the edge of the cubic structure.
The FCC has consisted of 4 atoms in a lattice.
The mass of the unit cell of Al can be calculated as:[tex]\rm 6.023\;\times\;10^2^3[/tex] atoms = 1 mole
4 atoms = [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles
The mass of 1 mole Al has been 26.98 g/mol.
The mass of [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles = [tex]\rm \dfrac{4}{6.023\;\times\;10^2^3}[/tex] moles × 26.98 g
The mass of 1 unit cell of Al has been = 1.792 [tex]\rm \bold{\times\;10^-^2^2}[/tex] g.
The volume of the Al cell can be calculated as:Density = [tex]\rm \dfrac{mass}{volume}[/tex]
Volume = Density × Mass
The volume of Al unit cell = 2.71 g/[tex]\rm cm^3[/tex] × 1.792 [tex]\rm \times\;10^-^2^2[/tex] g
The volume of Al cell = 6.613 [tex]\rm \times\;10^-^2^3[/tex] [tex]\rm cm^3[/tex]
The volume of the cube has been given as:Volume = [tex]\rm edge\;length^3[/tex]
6.613 [tex]\rm \times\;10^-^2^3[/tex] [tex]\rm cm^3[/tex] = [tex]\rm edge\;length^3[/tex]
Edge length = [tex]\rm \sqrt[3]{6.613\;\times\;10^-^2^3}[/tex] cm
Edge length = 4.044 [tex]\rm \times\;10^-^8[/tex] cm
Edge length = 4.044 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m.
In an FCC lattice structure, the radius of the atom can be given by:Edge length = [tex]\rm \sqrt{8\;\times\;radius}[/tex]
4.044 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m = [tex]\rm \sqrt{8\;\times\;radius}[/tex]
Radius = 1.430 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m.
1 m = [tex]\rm 10^1^2[/tex] pm
1.430 [tex]\rm \bold{\times\;10^-^1^0}[/tex] m = 143 pm.
The radius of the atom of Al in the FCC structure has been 143 pm.
For more information about the FCC structure, refer to the link:
https://brainly.com/question/14934549
When 75.5 grams of phosphorus pentachloride react with an excess of water, as shown in the unbalanced chemical equation below, how many moles of hydrochloric acid will be produced? Please show all your work for the calculations for full credit. PCl5 + H2O --> H3PO4 + HC
Answer:
Explanation: M(PCL5)= 31 + 5(35.5)
=208.5g/mol
M(H20)= 18g/mol
n(PCL5) = 75.5÷208.5
= 0.362mol
n(HCl)/n(PCL5)= 5/1
n(HCl)= 5×0.362
=1.81mol of HCl
Calcium carbide, CaC2, reacts with water to form calcium hydroxide and the flammable gas ethyne (acetylene) in the reaction: What mass of ethyne can be produced
Answer:
1 mole of CaC₂ will produce 26g of C₂H₂ or 64.1g of CaC₂ will produce 26g of C₂H₂
Explanation:
Hello,
To solve this question, we'll require a balanced chemical equation of reaction between calcium carbide and water.
Equation of reaction
CaC₂ + 2H₂O → Ca(OH)₂ + C₂H₂
Molar mass of calcium carbide (CaC₂) = 64.1g/mol
Molar mass of water (H₂O) = 18g/mol
Molar mass of calcium hydroxide (Ca(OH)₂) = 74g/mol
Molar mass of ethyne (C₂H₂) = 26g/mol
From the equation of reaction, 1 mole of CaC₂ will produce 1 mole of C₂H₂
1 mole of CaC₂ = mass / molar mass
Mass = 1 × 64.1
Mass = 64.1g
1 mole of C₂H₂ = mass / molar mass
Mass = 1 × 26
Mass = 26g
Therefore, 1 mole of CaC₂ will produce 26g of C₂H₂
Note: this is a hypothetical calculation since we were not given the initial mass of CaC₂ that starts the reaction
What is a heterogeneous mixture?
Answer:
The type of mixture whose components are seen through our naked eyes is known as heterogeneous mixture. it is a mixture of small constituent parts of substances.
for eg, mixture of sand and sugar.
hope it helps..
Chemistry question. Image attached.
Answer:
The answer to your question is given below
Explanation:
The balanced equation for the reaction is given below:
CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)
1. Writing an expression for the equilibrium constant, K.
The equilibrium constant, K for a reaction is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Thus, we can write the equilibrium constant, K for the reaction as follow:
CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)
K = [CaCO3] [H2]⁴ / [CaO] [CH4] [H2O]²
2. Based on the value of K, more products will be in the equilibrium mixture since the value of K is a positive large number.
Which physical method can be used for obtaining a sample of salt from a small beaker of salt water?
boiling
freezing
chromatography
sorting
Answer:
a. boiling
Explanation:
If you combine 24.2 g of a solute that has a molar mass of 24.2 g/mol with 100.0 g of a solvent, what is the molality of the resulting solution
Answer: 10 moles/kg.
Explanation:
Given, Mass of solute = 24.2 g
Molar mass of solute = 24.2 g/mol
[tex]\text{Moles of solute =}\dfrac{\text{Mass of solute}}{\text{Molar mass of solute}}\\\\=\dfrac{24.2}{24.2}=1[/tex]
Mass of solvent = 100.0g = 0.1 kg [1 g=0.001 kg]
[tex]\text{Molality}=\dfrac{\text{Moles of solute}}{\text{kilograms of Solvent}}\\\\=\dfrac{1}{0.1}\\\\=10\ moles/kg[/tex]
Hence, the molality of the resulting solution is 10 moles/kg.
Why does the excess of base used in these eliminations favor the E2 over the E1 mechanism for elimination
Answer:
The base is involved in the rate determining step of an E2 reaction mechanism
Explanation:
Let us get back to the basics. Looking at an E1 reaction, the rate determining step is unimolecular, that is;
Rate = k [Carbocation] since the rate determining step is the formation of a carbonation.
For an E2 reaction however, the reaction is bimolecular hence for the rate determining step we can write;
Rate = k[alkyl halide] [base]
The implication of this is that an excess of either the alkyl halide or base will facilitate an E2 reaction.
Hence, when excess base is used, E2 reaction is favoured since the base is involved in its rate determining step. In an E1 reaction, the base is not involved in the rate determining step hence an excess of the base has no effect on an E1 reaction.