Answer: The half-life is the amount of time it takes for a given isotope to lose half of its radioactivity. If a radioisotope has a half-life of 14 days, half of its atoms will have decayed within 14 days. In 14 more days, half of that remaining half will decay, and so on.
A dog runs 51 m west to fetch a ball and brings it back only 27 m before stopping.
The total displacement of the dog is:
(Need help pls)!!!!!
Answer:
I assume they want answer A, but it's a silly question.
Explanation:
Well, if we assume that the girls are applying equal force, as they are the same size and strength (apparently also the same resolve etc.).
Equal force in opposite directions means the composite force is null. An object that no force is applied to continues moving in the same direction, so if the doll was moving somewhere, it would keep doing so, except all of this makes no sense the doll is not in gravityless vacuum what are we even talking about.
The answer A is the least ridiculous.
Balance the equation by choosing the correct coefficient numbers in the drop down menus.
[Select]
SO2 +
[Select]
VH₂ →
[Select]
S +
[ Select]
H20
It is suggested you write this on scratch paper and balance it before choosing your answers :)
Answer:
SO₂ + 2H₂ —> S + 2H₂O
The coefficients are: 1, 2, 1, 2
Explanation:
SO₂ + H₂ —> S + H₂O
The above equation can be balance as follow:
SO₂ + H₂ —> S + H₂O
There are 2 atoms of O on the left side and 1 atom on the right side. It can be balance by writing 2 before H₂O as shown below:
SO₂ + H₂ —> S + 2H₂O
There are 2 atoms of H on the left side and 4 atoms the right side. It can be balance by writing 2 before H₂ as shown below:
SO₂ + 2H₂ —> S + 2H₂O
Now, the equation is balanced.
The coefficients are: 1, 2, 1, 2
Two experiments are performed on an object to determine how much the object resists a change in its state of motion while at rest and while in motion. In the first experiment, the object is pushed with a constant known force along a horizontal surface. There is negligible friction between the surface and the object. A motion sensor is used to measure the speed of the object as it is pushed. In a second experiment, the object is tied to a string and pulled upward with a constant known force, and a motion sensor is used to measure the speed of the object as it is pulled upward. The student uses the data collected from the motion sensor to determine the mass of the object in both experiments.
Required:
What classifies the type of mass that was determined in each experiment?
Answer:
In the first experiment, the mass is inertial mass and in the second experiment, the mass is a gravitational mass.
Explanation:
It is given that a student performs two types of experiment to see how change in its resistance while in the state of motion and in rest.
In the first experiment, an object is pushed with a force against a horizontal surface and the speed is measured using a sensor. Here, work is done against the inertia of the object as it is pushed from rest. So the mass is inertial mass.
In the second experiment, an object is pushed or thrown upwards with a force and speed is measured. Here, the mass is gravitational mass as the work done in the second experiment is against the gravity or against the weight of the object.
In the first experiment, the mass is inertial mass and in the second experiment, the mass is a gravitational mass.
As per the given problem, the student performs two types of experiment to see how change in its resistance while in the state of motion and in rest.
In the first experiment, an object is pushed with a force against a horizontal surface and the speed is measured using a sensor. Here, work is done against the inertia of the object as it is pushed from rest. So the mass is inertial mass. In the second experiment, an object is pushed or thrown upwards with a force and speed is measured. Here, the mass is gravitational mass as the work done in the second experiment is against the gravity or against the weight of the object.Thus, we can conclude that the in the first experiment, the mass is inertial mass and in the second experiment, the mass is a gravitational mass.
Learn more about the inertial mass and gravitational mass here:
https://brainly.com/question/14390060
a disk of a radius 50 cm rotates at a constant rate of 100 rpm. what distance in meters will a point on the outside rim travel during 30 seconds of rotation?
Answer:
Wait lang po sandali po wait lang
6. The rate at which velocity changes is called
O speed
O direction
O acceleration
O displacement
When you look at the backside of a shiny teaspoon held at arm's length, do you see yourself upright or upside down? (b) When you look at the other side of the spoon, do you see yourself upright or upside down? Assume in both cases that the distance between you and the spoon is greater than the focal length of the spoon.
Answer:
a) The back spoon gives a right image (upright)
b) the front gives an inverted image
Explanation:
The spoon is a curved metallic object, when we see ourselves from the back we have a convex mirror, in this type of mirror when the law of reflection is applied the rays diverge therefore the eye-brain system forms the image with the prolongation of the rays, therefore the image is straight and smaller than the object.
When we look through the deep side of the spoon, we have a concave mirror and as the object (we) is further away than the distance, the rays converge to a point, so the image is real, inverted smaller than the object.
In summary.
a) The back spoon gives a right image (upright)
b) the front gives an inverted image
Temperature is the measure of the average kinetic energy of the particles in an object. True False
Answer:
true
Explanation:
with increased temperature particles move faster as they gain kinetic energy
How much gravitational force do two lead balls with a mass of 8 kilograms, the centers of mass of which are 17 cm apart, affect each other?
Answer:
1.48×10⁻⁷ Newtons
Explanation:
From the question,
According to newton's law of universal gravitation.
F = Gmm'/r²........................ Equation 1
F = gravitational force, G = gravitational constant, m = mass of the first ball, m' = mass of the second ball, r = distance between the balls.
Given: m = m' = 8 kg, r = 17 cm = 0.17 m,
Constant : G = 6.67×10⁻¹¹ Nm²/kg²
Substitute these values into equation 1
F = (6.67×10⁻¹¹×8×8)/(0.17²)
F = 1.48×10⁻⁷ N
We have seen that the voltage of a concentration cell can be affected by the concentrations of aqueous components and/or temperature. The identity of the redox pair also affects the observed voltage of a concentration cell in a somewhat subtle way. Carefully consider the Nernst equation. Rank the redox pairs below from greatest (1) to smallest (3) voltage in a concentration cell, assuming equal values of T and Q for all cells. Assume multimeter leads are connected to that measured voltages are positive.
a. Copper metal/copper(l) ion
b. Aluminum/aluminum ion
c. Magnesium metal/magnesium ion
Answer:
1) Magnesium metal/magnesium ion
2) Aluminum/aluminum ion
3) Copper metal/copper(l) ion
Explanation:
The activity series is a series that shows the ease of reactivity of substances in an electrochemical cell.
The substances that are higher up in the series are more reactive in electrochemical cells.
Magnesium is the first element in the series that has the most negative redox potential then followed aluminium.
Hence, according to Nernst,
1) Magnesium metal/magnesium ion
2) Aluminum/aluminum ion
3) Copper metal/copper(l) ion
You are testing a new amusement park roller coaster with an empty car with a mass of 130 kg . One part of the track is a vertical loop with a radius of 12.0 m . At the bottom of the loop (point A) the car has a speed of 25.0 m/s and at the top of the loop (point B) it has speed of 8.00 m/s . Part A As the car rolls from point A to point B, how much work is done by friction
Answer:
work done by friction = 5889 J
Explanation:
We are given;
Mass of car; m = 130 kg
Speed at point A; v1 = 25 m/s
Speed at point B: v2 = 8 m/s
Since radius is 12 m
At point A, distance is; y1 = 12 m
At point B, distance is; y2 = -12 m
Now, formula for work done by all the forces is given by the equation;
Total work;
W_gravity + W_others = K2 - K1
Where W_others is work done by other forces which is equal to work done by friction
Where K2 - K1 is change in kinetic energy.
W_grav is also change in potential energy and is expressed as;
W_grav = mgy1 - mgy2
K2 - K1 = ½m(v1)² - ½m(v2)²
Thus;
mgy1 - mgy2 + W_others = ½m(v1)² - ½m(v2)²
Making W_others the subject;
W_others = ½m(v1)² - ½m(v2)² + mgy2 - mgy1
Plugging in the relevant values;
W_others = (½ × 130 × 25²) - (½ × 130 × 8²) + (130 × 9.8 × -12) - (130 × 9.8 × 12)
W_others = 5889 J
Recall that I earlier said W_others = work done by friction.
Thus, work done by friction = 5889 J
A uniform magnetic field is in the positive z direction. A positively charged particle is moving in the positive x direction through the field. The net force on the particle can be made zero by applying an electric field in what direction
Answer:
We apply an electric field in the negative y direction
Explanation:
Since A uniform magnetic field is in the positive z direction and A positively charged particle is moving in the positive x direction through the field, the magnetic force acting on the positively charged particle is in the positive y direction according to Fleming's right-hand rule.
For the net force on the particle to be zero, we apply an electric field in the negative y direction to create an electric force on the positively charged particle, so as to cancel out the magnetic force.
What is wrong with the following momentum value: 25 kg*m/s
Answer:
25N/s or 25kg*m/s^2
Explanation:
It is written wrong because the unit of momentum is kgm/s^2 or N/s
In a nuclear fusion reaction, atoms:
split apart.
combine.
explode.
cool down.
What is the approximate surface temperature of the 'White Dwarfs'?.
2,500-5,000 K
5,000-10,000
10,000-15,000 K
15,000 K-35,000 K
Answer:
5,000-10,000 K
Explanation:
make me your brainlist pls
Which is observed globally: "Earth Day" or "Arbor Day"?
Answer:
Earth Day is observed globally
Explanation:
a train has an initial velocity of 30 m/s. If the train accelerates uniformly at a rate of 6.3 m/s ^ for 2.8 seconds what is the trains final velocity?
T
Answer:
the velocity is a second final to initial velocity of 39
Which change will always result in an increase in the gravitational force between two objects?
O increasing the masses of the objects and increasing the distance between the objects
O decreasing the masses of the objects and decreasing the distance between the objects
O increasing the masses of the objects and decreasing the distance between the objects
• decreasing the masses of the objects and increasing the distance between the objects
Answer:
increasing the masses of the objects and decreasing the distance between the objects
Explanation:
Pls quickly brainliest to the first to anwser
Answer:
8m/s^2
Explanation:
hope it helps........
Explanation:
you're supposed to know the formula of acceleration which is velocity of a time then you can solve the question
A car weighing 1,500kg possesses 20 000 units of momentum. What would be the car's new momentum if it's velocity was tripled
Answer:
▓▓▓
▒▒▒▓▓
▒▒▒▒▒▓
▒▒▒▒▒▒▓
▒▒▒▒▒▒▓
▒▒▒▒▒▒▒▓
▒▒▒▒▒▒▒▓▓▓
▒▓▓▓▓▓▓░░░▓
▒▓░░░░▓░░░░▓
▓░░░░░░▓░▓░▓
▓░░░░░▓░░░▓
▓░░▓░░░▓▓▓▓
▒▓░░░░▓▒▒▒▒▓
▒▒▓▓▓▓▒▒▒▒▒▓
▒▒▒▒▒▒▒▒▓▓▓▓
▒▒▒▒▒▓▓▓▒▒▒▒▓
▒▒▒▒▓▒▒▒▒▒▒▒▒▓
▒▒▒▓▒▒▒▒▒▒▒▒▒▓
▒▒▓▒▒▒▒▒▒▒▒▒▒▒▓
▒▓▒▓▒▒▒▒▒▒▒▒▒▓
▒▓▒▓▓▓▓▓▓▓▓▓▓
▒▓▒▒▒▒▒▒▒▓
▒▒▓▒▒▒▒▒▓
Explanation:
The weight of a column of air pushing
down over an area is called which of
Help Resources
these?
A. density
B. volume
C. mass
D. air
pressure

Answer:
air pressure
:::::::::::::::::
a Ferris wheel with a diameter of 35 m starts from rest and achieves its maximum operational tangential speed of 2.3 m/s in a time of 15 s. what is the magnitude of the wheels angular acceleration?
b. what is the magnitude of the tangential acceleration after the maximum operational speed is reached?
(a) The magnitude of the wheels angular acceleration is 0.0088 rad/s².
(b) The magnitude of the tangential acceleration after the maximum operational speed is reached is 0.153 m/s².
Angular acceleration of the wheel
The angular acceleration of the wheel is calculated as follows;
α = ω/t
ω = v/r
α = v/(rt)
α = (2.3)/(17.5 x 15)
α = 0.0088 rad/s²
Tangential acceleration of the wheela = v/t
a = (2.3)/15
a = 0.153 m/s²
Learn more about angular acceleration here: https://brainly.com/question/25129606
#SPJ6
I’ll mark you as brinlist please help.
Answer:
245 divided by 5.14=47.6653696 or 47.66
Explanation:
This photo shows a beam of light entering and exiting a piece of glass.
What happens when the light enters the glass?
A. The light is absorbed.
B. The light is reflected.
C. The light is scattered.
D. The light is refracted.
Answer:
D. The Light Is Refracted
Explanation:
<3
A substance whose shape can easily change is a
Which of the following would NOT be
considered a pollutant?
A. carbon monoxide
B. sulfur dioxide
C. oxygen
D. smoke
Answer:
Answer: Oxygen
Explanation:
Oxygen would not be considered as a pollutant
Answer:
Hey there the answer is C. Oxygen
Explanation:
Oxygen is the chemical element with the symbol O and atomic number 8. It is a member of the chalcogen group in the periodic table, a highly reactive nonmetal, and an oxidizing agent that readily forms oxides with most elements as well as with other compounds. After hydrogen and helium, oxygen is the third-most abundant element in the universe by mass. At standard temperature and pressure, two atoms of the element bind to form dioxygen, a colorless and odorless diatomic gas with the formula O 2. Diatomic oxygen gas constitutes 20.95% of the Earth's atmosphere. Oxygen makes up almost half of the Earth's crust in the form of oxides. Hope this helps! Have a great day!
Becoming informed about economics helps a person understand the reasons a command economy is ideal. role of government in regulating production. why consumers receive tax revenue. reasons an economy must always be completely regulated. Mark this and return
Answer:
Role of government in regulating production
Explanation:
The role of government in regulating show , provides the legal and social framework, uphold competition, provides public goods and services.
What is the role of economics in the community?The community's role in conserving and enhancing common-property resources is well known.
In extra, its role in helping market growth by its power to execute trade agreements among transacting parties belonging to the community network is stressed.
Thus, it provides the legal and social framework, maintains competition, and provides public goods and services.
To learn more about economics in community click here:
https://brainly.com/question/1344575
What is known as the amount of mass in
a given volume?
A. density
B. pressure
C. surface tension
D. mass pressure
If a 75 W lightbulb is 15% efficient, how many joules of light energy does the bulb produce every minute?
Answer:
1 W = 1 J / sec Definition of watt is 1 joule / sec
So if a bulb uses 75 J / sec it must use
75 J/s * 60 sec / min = 4500 J/min energy used by bulb
If bulb is 15% efficient then the light delivered is
P = 4500 J / min * .15 = 675 J / min
[tex]\\ x^{2} \int\limits^a_b {x} \, dx \int\limits^a_b {x} \, dx \neq \pi \pi \left[\begin{array}{ccc}1&2&3\\4&5&6\\7&8&9\end{array}\right] \left[\begin{array}{ccc}1&2&3\\4&5&6\\7&8&9\end{array}\right] \left[\begin{array}{ccc}1&2&3\\4&5&6\\7&8&9\end{array}\right][/tex]
Answer:
I think you have a problem trying to write the question down, can you re write it because it seems glitched.
Explanation: