Answer:
ΔT ≈ 7°C (1 sig-fig)
Explanation:
Q = mcΔT => ΔT = Q/mc = 1000J/150g·0.96j·g·°C = 6.94°C ≈ 7°C (1 sig-fig)
What causes adaptions to occur ?
Factors that influence general adaptation syndrome include that of a person’s health, nutrition, sex, ages, race, socioeconomic status, and genetics. These are factors that are either can precipitate a different reaction, while others are modifiable and unmodifiable traits.
In biology, adaptation has 3 related meanings. Firstly, it is the dynamic evolutionary process that fits organisms to their environment, enhancing their evolutionary fitness. Secondly, it is a state reached by the population during that process. Thirdly, it is a phenotypic trait or adaptive trait, with a functional role in each organism, that is maintained and has evolved through natural selection. Historically, adaptation has been described from the time of the ancient Greek philosophers such as Empedocles and Aristotle. In 18th and 19th century natural theology, adaptation was taken as evidence for the existence of a deity. Charles Darwin proposed instead that it was explained by natural selection. Adaptation is related to biological fitness, which governs the rate of evolution as measured by a change in gene frequencies. Often, two or more species co-adapt and co-evolve as they develop adaptations that interlock with those of the other species, such as with flowering plants and pollinating insects. In mimicry, species evolve to resemble other species; in Müllerian mimicry, this is a mutually beneficial co-evolution as each of a group of strongly defended species (such as wasps able to sting) come to advertise their defenses in the same way. Features evolved for one purpose may be co-opted for a different one, as when the insulating feathers of dinosaurs were co-opted for bird flight. Adaptation is a major topic in the philosophy of biology, as it concerns function and purpose (teleology). Some biologists try to avoid terms that imply purpose in adaptation, not least because it suggests a deity's intentions, but others note that adaptation is necessarily purposeful.
Identifying Variables in the Effect of Type of Material on
Absorption Experiment
Answer the questions using the drop-down menus.
Which is the independent variable in this experiment?
Which is the dependent variable in this experiment?
Which is a controlled variable in this experiment?
In Absorption Experiment,
Water location is the independent variable in this experiment.
Room Temperature in the material is dependent variable in this experiment.
Type of a material is a controlled variable in this experiment.
What is Absorption Experiment ?Absorption experiment is nothing but the experiment of absorption of water in a material (sponge).
Experiment requires vessel, water and sponge.
Processor - take a vessel, pour water into it and dip sponge. take out the sponge. After taking of out sponge, water appears to be decreased from the vessel and sponge gets heavier. When we squeeze the the sponge, water drops down. It is because of water is absorbed by the spouge.
There are number of pores in the sponge, which absorbs the water.
Water location is the independent variable.
In this experiment Room Temperature is dependent variable in this experiment rate of absorption increases with increase in the temperature. decrease in the temperature cause to solidify the water. Type of a material is a controlled variable, we can change type of the material.
To know more about variables :
brainly.com/question/14289293
#SPJ7.
2H₂ +0 a 2H₂O
Mole ratio of water to oxygen
Answer: 2:1
The ratio of hydrogen atoms to oxygen atoms used to make water molecules is always 2:1, no matter how many water molecules are being made.
Explanation:
Answer: GoodMorning: )✨2:1
The ratio of hydrogen atoms to oxygen atoms used to make water molecules is always 2:1, no matter how many water molecules are being made.
Have AN Amazing Day <3
What would happen if your DNA were missing a piece of a gene?
Answer:
Genetic information is lost, so then it would basically be some form of a small mutation
How much energy is required to raise the temperature of 3 kg of iron from 20°
C to 25°C? Use the table below and this equation: Q = mcAT.
Answer:
Option C (6750 J) is the appropriate response.
Explanation:
The given values are:
Mass of iron,
m = 3 kg
Specific heat capacity,
[tex]c_A[/tex] = 0.450
Temperature,
T = [tex]25-20[/tex]
= [tex]5^{\circ}C[/tex]
Now,
⇒ [tex]Q=mc_A T[/tex]
On substituting the values, we get
⇒ [tex]=3\times 0.450\times 5[/tex]
⇒ [tex]=6.75[/tex]
i.e,
⇒ [tex]=6750 \ J[/tex]
Need help Please ASAP
The density of hexane is 0.660 g/mL. What is the volume of a 57g sample of hexane?
What caused the deer population to grow early on?
A.) An abnormally cold winter caused offspring to die.
B.) A drought caused there to be less food and water available to the deer.
C.)The number of births was equal to the number of deaths in the deer population.
D.) The deer had a better food source so they had 2-3 fawns per year instead of 1 fawn
per year.
Answer:
i think it is C but not 100% sure.
Explanation:
Answer:
D) The deer had a better food source so they had 2-3 fawns per year instead of 1 fawn per year.
The other options show that the populations actually decreased, due to cold temperatures and droughts.
Let me know if this helps!
How the size of the sun compares to the sizes of the other stars
Answer:
the sun is pretty smol compared to others
Explanation:
Use the words Mercury, Venus, Earth or Mars to fill in the blanks
Answer:
Earth is the only planet with plate tectonics
Mars is the most heavily cratered planet
Mercury is the only planet that has virtually no atmosphere
Mars has an atmosphere that is about 1% as dense as Earth's
Venus has an extremely dense atmosphere
Venus rotates in the opposite direction of the other planets
Venus is the most volcanically active planet
and Earth have sedimentary rock formations
Earth has a strong magnetic field
Mars had oceans in the past :3
Explanation:
:3
How many moles are in 12.56 grams of CH4?
Answer:
About 0.783
Explanation:
Answer:
0.7830 mol
Explanation:
Just divide by the molar mass, which is 16.04 g/mol. That will take away grams so youre left with moles and your answer will be .783042. Using significant figures (4) so it will be 0.7830.
Which of the following is NOT true about the role tectonic forces play in the rock cycle?
1. When plates pull apart, rocks melt, and magma forms igneous rocks.
2. When plates crash together, rocks are buried and form metamorphic rocks.
3. When plates slide over & under each other, the heat & pressure form igneous rocks.
4. When rocks push upward & form mountains, the erosion of the mountains can produce sediment.
Answer:
i believe it is number #3
Explanation:
hope this helps
What are substances that cannot be broken down into simpler substances?
a. elements
b.compounds
c. molecules
d.protons
Answer:
Elements
Explanation:
Elements cannot be broken down into a simpler substance
What are the % composition for Carbon and Hydrogen in C3H6?
Answer:
Carbon=about 85.13%
Hydrogen=about 14.26%
Explanation:
Percent composition= (molar mass of element x amount of it)/Molar mass x100
C= 12x3/42.08 x100=about 85.13
H=6x1/42.08 =about 14.26
Which element was first discovered in space before it was discovered on Earth?
nitrogen
helium
carbon
hydrogen
Answer:
carbon
Explanation:
Answer:
carbon was discovered in space before on earth
Two students are having a tug of war. The flag on the rope begins at point Y. team A pulls to the left with force of 120 N. Team B pulls to the right with force of 160 N. Based on these forces, which letter shows the likely movement of the flag?
Choices:
A: W
B: X
C: Y
D: Z
(Please help!!) 20 points
newtons forst law of motion is also known as___?
Answer:
law of inertia
Explanation:
What is a chemical equation, and
how do scientists use these
equations to represent chemical
reactions?
Answer:
A chemical equation is the symbolic representation of a chemical reaction in the form of symbols and formulae, wherein the reactant entities are given on the left-hand side and the product entities on the right-hand side.
In mathematic equations we use an equal sign (=) for example 2 + 2 = 4, but in scientific chemical equations, we use an arrow (→), for example C + O2→ CO2. To the left of the arrow, we have the 'before' situation. This side represents the substances we have beforethe reaction takes place. They are called the reactants.
Cell is to a tissue as brick is to _______.
Cement
Clay
Bricklayer
wall
Answer:
bricklayer
Explanation:
is the correct answer
someone help ,, I'll give brainliest lol .
Answer:
D.
Explanation:
Hopefully this helps
Answer:
A
Explanation:
I think the correct answer is A. Online it says that oxidation can be defined in terms of the adding or removing oxygen to a compound/Oxidation is the gain of oxygen.
what is the mass number of an atom which contains 21 electrons,21 protons and 24 neutrons
Answer:
The atomic mass number is 45.
Hope this helps
I
Solid iron(III) oxide is produced when hot iron filings are exposed to pure
oxygen gas.
Dose anyone understand this I need help can anyone help me on this please !
Name two things that affect the rate of weathering and why this happens ASAP
Answer:
Rain and temperature.
Explanation:
These cause geological landforms to erode/weather.
Rain is water that slowly chips away land-forms.
What is the mass in grams of 5.90 moles of aluminum. AI?
Answer:
159.3 grams Al
Explanation:
1 Mol of Al = 27 grams, so:
5.9 Mol Al (27g/1mol) = 159.3 grams Al
The Mol gets canceled out, leaving the unit of grams.
hey guys, i found this marble outside and covered in grease. so i took it in to wash it. can you please tell me what it is made of...plz
Answer:
I can't see the marble so I don't know
can someone help me with these?
Answer: 6. The pressure inside the baloon will be 6.8 atm
7. The final volume is 21.5L at tempearture of 388 K.
Explanation:
Boyle's Law: This law states that pressure is inversely proportional to the volume of the gas at constant temperature and number of moles.
[tex]P\propto \frac{1}{V}[/tex] (At constant temperature and number of moles)
[tex]P_1V_1=P_2V_2[/tex]
where,
[tex]P_1[/tex] = initial pressure of gas = 3.5 atm
= final pressure of gas = ?
= initial volume of gas = 32 L
[tex]V_2[/tex] = final volume of gas = 19.3 L
[tex]3.5\times 32=P_2\times 19.3[/tex]
[tex]P_2=5.8atm[/tex]
Therefore, the pressure inside the baloon will be 5.8 atm
7. To calculate the final volume of the system, we use the equation given by Charles' Law. This law states that volume of the gas is directly proportional to the temperature of the gas at constant pressure.
Mathematically,
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]
where,
[tex]V_1\text{ and }T_1[/tex] are the initial volume and temperature of the gas.
[tex]V_2\text{ and }T_2[/tex] are the final volume and temperature of the gas.
We are given:
[tex]V_1=13L\\T_1=235K\\V_2=?\\T_2=388K[/tex]
Putting values in above equation, we get:
[tex]\frac{13L}{235K}=\frac{V_2}{388K}\\\\V_2=21.5L[/tex]
Thus it will occupy 21.5L at tempearture of 388 K.
Plants grow in many different shapes and sizes. Much of their shape depends on an internal structure that is composed of carbon-containing molecules such as cellulose and lignin. Plants that have a strong internal structure can grow larger than other plants because their structure can support their size.
Plants obtain the majority of the carbon necessary for building these structural molecules from —
F
air
G
microorganisms
H
soil
J
water
Answer:
F=Air
Explanation:
Because I took the test hope it helps
The particles of a liquid are able to move around each other. What property of a liquid does this behavior create?
Answer:
Behaviour is in the form of surface tension.
Explanation:
The particles of the liquid are quite close to each other and move with the random movement around the containers. These particles tend to move rapidly in all directions due to the shorter distances between particles. The property of the liquids to flow is their viscosity. Described as the quality of the liquid to flow. They have no fixed shape, as they are made by tiny vibrating particles that are held together by intermolecular bonds. liquids don't disperse like the gases they have surface tension.If 1.0 mole of C8H18 are available to completely react
with enough O2, how many moles of H20 can be produced?
Answer: 1 mol C8H18 produces 9 mol H2O
Explanation: reaction : C8H18 + 12.5 O2 ⇒ 8 CO2 + 9 H2O