What is the acceleration of a 24 kg mass pushed by an 8 N force?

Answers

Answer 1

Answer:

0.25 m/s squared

Explanation:

Mass of the body (m)= 24kg

Applied force on the body(F)= 6N

Acceleration of the body (a)= ?

Solution

F = ma

a = F/m

a = 6N/24kg

a = 0.25m/s^2

Answer: The acceleration of the body is 0.25m/s^2

I hope this helps

Answer 2

Answer:

[tex]\boxed {\boxed {\sf a=\frac {1}{3} \ m/s^2}}[/tex]

Explanation:

Force is the product of mass and acceleration.

[tex]F=ma[/tex]

The mass is 24 kilograms and the force is 8 Newtons. Let's convert the Newtons to make the problem easier.

1 Newton is equal to 1 kilogram meter per square second. The force of 8 N equals 8 kg*m/s²

Substitute the known values into the formula.

[tex]8 \ kg*m/s^2= (24 \ kg )*a[/tex]

Since we are solving for a, we must isolate the variable. It is being multiplied and the inverse of multiplication is division. Divide both sides by 24 kilograms.

[tex]\frac {8 \ kg*m/s^2}{24 \ kg}= \frac{(24 \ kg )*a}{24 \ kg}[/tex]

The kilograms will cancel, hence our earlier unit conversion.

[tex]\frac {8 \ m/s^2}{24 }= a[/tex]

[tex]\frac {1}{3} \ m/s^2=a[/tex]

The acceleration is 1/3 meter per square second.


Related Questions

3. How does the wavelength of green different from violet-indigo?​

Answers

Answer:

As the full spectrum of visible light travels through a prism, the wavelengths separate into the colors of the rainbow because each color is a different wavelength. Violet has the shortest wavelength, at around 380 nanometers, and red has the longest wavelength, at around 700 nanometers.

Explanation:

Una bola se lanza verticlamente de la parte superior de un edificio con una velocidad inicial 25 m/s la bola impacta al suelo en la base del edificio 7 segundos despues de ser lanzada ¿que altura subio la bola

Answers

Answer:

S = 415.1 meters

Explanation:

Dados los siguientes datos;

Velocidad inicial = 25 m/s

Tiempo, t = 7 segundos

Para encontrar la altura (desplazamiento) de la pelota, usaríamos la segunda ecuación de movimiento;

[tex] S = ut + \frac {1}{2}at^{2}[/tex]

Dónde;

S representa el desplazamiento o altura medida en metros.

u representa la velocidad inicial medida en metros por segundo.

t representa el tiempo medido en segundos.

a representa la aceleración medida en metros por segundo cuadrado.

Sustituyendo en la ecuación, tenemos;

[tex] S = 25*7 + \frac {1}{2}*(9.8)*7^{2}[/tex]

[tex] S = 175 + 4.9*49 [/tex]

[tex] S = 175 + 240.1 [/tex]

S = 415.1 meters

An egg sinks in fresh water but floats on concentrated salt solution​

Answers

the salt solution exerts a greater up thrust on the egg which balances the weight of the egg, so the egg floats in a strong salt solution but sinks in fresh water

One of the solid reactants was treated in a coffee grinder before adding to

the reaction container. *

O

A. Concentration

B. Temperature

C. Surface Area

D. Catalyst

E. Agitation

Answers

Answer:

C. Surface area

Explanation:

The rate of  chemical reaction depends on various factors such as:

concentration and pressurenature of reactantstemperaturesurface areapresence of catalyst, etc.

Effect of surface area of reactants: the rate of a chemical reaction can be increased by increasing the the area of contact of the reacting substances. This is especially important when one or more of the reactants are solids., because only the particles of the solid that are exposed are able to take part in the reaction at each instant of time. Therefore, the greater the surface area of the solid reactant particles the faster the reaction.

The surface area of solid reactants can be increased by grinding or pelletizing, thus allowing for a greater contact between the reacting particles,

The instance in which one of the solid reactants was treated in a coffee grinder before adding to the reaction container is one way of increasing the surface area of a reactant.

who invented Pascal??​

Answers

What the guy above me said

A disturbance that generates a wave may be a simple pulse or shock

True or false

Answers

Answer:

That would be true.

-- a bell starts ringing (wave) when you tap it (simple pulse)

-- a pond starts rippling (wave) when a stone drops in (simple shock)

-- a guitar strings starts waving when you pluck it

Sunlight is a form of electromagnetic energy.


Please select the best answer from the choices provided

T
F

Answers

Answer: True

Explanation: Hope this helps :)

Question 2
What measurements are needed to calculate your BMI?

A. Weight and shoe size
B. Height and weight
C. heart and breathing rate per minute
D. core temperature and height


Answers

Answer:

B

Explanation:

i really really need help with this so please help me for a better grade asap

Answers

Answer :

Imma just put it in the explanation

Explanation:

Electric to sound : Radio

Chemical to thermal+radiant+sound+kinetic : Fireworks

Gravitational to kinetic+sound : Waterfall

Chemical to thermal+kinetic : Drinking water (not sure what last answer is called but its supposed to match the girl drinking water lol)

hope this helps

Which would increase the speed of a sound wave?

Answers

Answer:

I would say temperature

In a series circuit, there is a 2-ohm resistor with a current of 5A. If there is another resistor with a resistance of 5 ohms, what is the current inside that resistor?

Answers

Answer:

if 2ohms gives 5A

then 5ohms will give 12.5A

since its directly proportional

V=IR

A potato is which part of the plant?
root
stem
leaf
flower

Answers

I’m pretty sure it’s the root

A force of 1000 N is exerted on a golf ball for 0.005 s. The change in momentum of the golf ball is - a 200,000 kg m//s b 50 kg m//s c 5,000 kg m//s d 5 kg m//s

Answers

Answer:

d) 5 Ns

Explanation:

Impulse = Ft = 1,000(0.005) = 5

what is specific heat capacity?​

Answers

Specific heat capacity is defined as the amount of heat required to raise the temperature of 1 kilogram of a substance by 1 kelvin (SI unit of specific heat capacity J kg−1 K−1). From: Basic Physics and Measurement in Anaesthesia (Fourth Edition), 1995.

Answer: It is the amount of thermal energy (heat) needed to raise the temperature of 1kg of a substance by 1°C. *It is important to state that it is per kg because of the word "specific". cliffffy4h and 3 more users found this answer helpful.

A centrifuge used in DNA extraction spins at a maximum rate of 7000rpm producing a "g-force" on the sample that is 6000 times the force of gravity. If the centrifuge takes 10 seconds to come to rest from the maximum spin rate: a) What is the angular acceleration of the centrifuge? b)what is the angular displacement of the centrifuge during this time

Answers

Answer:

A) a = 73.304 rad/s²

B) Δθ = 3665.2 rad

Explanation:

A) From Newton's first equation of motion, we can say that;

a = (ω - ω_o)/t. We are given that the centrifuge spins at a maximum rate of 7000rpm.

Let's convert to rad/s = 7000 × 2π/60 = 733.04 rad/s

Thus change in angular velocity = (ω - ω_o) = 733.04 - 0 = 733.04 rad/s

We are given; t = 10 s

Thus;

a = 733.04/10

a = 73.304 rad/s²

B) From Newton's third equation of motion, we can say that;

ω² = ω_o² + 2aΔθ

Where Δθ is angular displacement

Making Δθ the subject;

Δθ = (ω² - ω_o²)/2a

At this point, ω = 0 rad/s while ω_o = 733.04 rad/s

Thus;

Δθ = (0² - 733.04²)/(2 × 73.304)

Δθ = -537347.6416/146.608

Δθ = - 3665.2 rad

We will take the absolute value.

Thus, Δθ = 3665.2 rad

If C is the vector sum of A and B, C = A + B, What must be true if C = A + B?. What must be true if C = 0?.

Answers

A and B are equal vectors

You ride your bike 5 miles east to school, then 2 miles east to Wawa, return to school, then ride 2 miles west to the library to work on your homework. What is your displacement?

Answers

Answer:

3 miles

Explanation:

5 + 2 - 2 - 2 = 3 miles

Select the correct answer from each drop-down menu.

Photosynthesis is a process in which plants prepare food using carbon dioxide, chlorophyll, and water in the presence of sunlight.

During photosynthesis,(blank)
energy is transformed into(blank)
1.Chemical,electrical,kinetic, Solar ?
2.Chemical, Electrical, Kinetic, Solar


Answers

Answer:

During photosynthesis solar energy is converted into chemical energy

Explanation:

During photosynthesis solar energy is converted into chemical energy in the form of energy rich bond of ATP molecule.

ATP (Adenosine triphosphate) and ADP (Adenosine diphosphate) molecules are termed currency of energy. ADP molecule is converted into ATP molecules, whenever energy is available in certain exothermic reactions of metabolism.

ATP molecules are store- house of energy. ATP molecule is broken down into ADP molecule in presence of enzyme ATPase, releasing energy whenever energy is required.

The synthesis of ATP molecules, utilizing solar energy during photosynthesis, is termed photo-phosphorylation.

These ATP molecules produced during light reaction of photosynthesis are utilized in dark reaction of photosynthesis (Calvin cycle).

ATP molecules synthesized during photo-phosphorylation may also be used in other metabolic reactions.

Photo-phosphorylation is of 2 types, i.e. Cyclic and Non-cyclic photo-phosphorylation.

Chlorophyll molecules entrap solar energy . There are 2 types of photo-systems in chlorophyll. These are photo-system -I and photo-system-II .

The electrons of chlorophyll molecule of photo-system I get excited which pass through series of electron carriers in electron transport system arranged in the order of decreasing energy level.

During the passage of electrons from carriers of higher energy level to the carriers of lower energy level, the energy is lost which is utilized for converting ADP molecule into ATP molecule.

Photo-system I is concerned with light reaction of photosynthesis only, constituting cyclic photo-phosphorylation.

The electron transport during Photo-system II results in the synthesis of NADPH2 in presence of enzyme NADP reductase. NADPH2 is used in reduction reaction of Calvin cycle.

Both Photo-systems participate in non-cyclic photo-phosphorylation that results in the synthesis of NADPH2 in addition to the synthesis of ATP molecules.

objects through which light can pass are referred to as dash objects​

Answers

Answer:

Those objects are called transparent objects...

Explanation:

If only some light can pass through them ,it is called translucent....

If no light can pass through them ,it is called opaque.

Answer:

hii good morning

hey i am not good player but i wanted to give a triel to play duo in ff

How much power is needed to lift a 20-kg object to a height of 4.0 m in 2.5 seconds?

Answers

Answer:

313.92w

Explanation:

Formula for power:

P=W/∆t = Fv

Givens:

m=20kg

∆y=4.0m

∆t=2.5s

a=9.81m/s²

In order to find power, we first need to solve for work.

W=Fd (force*displacement), f=mg

W=mg∆y

W=(20kg)(9.81m/s²)(4.0m)

W=784.8J

P=W/∆t

P=784.8J/2.5s

P=313.92 watts

2. How does laser light differ from
normal light?​

Answers

Answer:

Laser light differs from normal light because laser lights are monochromatic which means it only shines one color and only that color :3

Explanation:

:3

The major difference between laser light and light generated by white light sources (such as a light bulb) is that laser light is monochromatic, directional and coherent. ... Coherent means that the waves of light are in phase with each other. A light bulb produces many wavelengths, making it incoherent.

does anybody have social media and could help me with my homework ? i will send you pictures of my work please all of my work is due tomorrow!! i need help

Answers

Yes I do I can help if you need some

What are the mechanical advantage and mechanical efficiency of a lever that requires an input force of 40 N and lifts and lifts a boulder that weighs 80 N?

Answers

Answer:

2 , 200%

Explanation:

Mechanical advantage of a machine is defined as how much the machine multiplies the applied force.

It is given that :

Input force of the lever = 40 N

The weight of the boulder or the output force = 80 N

Therefore, the mechanical advantage = output force / input force

                                                               [tex]$=\frac{80}{40}$[/tex]

                                                               = 2

Mechanical efficiency is obtained by the dividing the output by the input and multiplying it with 100.

i.e. Efficiency = output / input x 100

                      [tex]$=\frac{80}{40}\times 100$[/tex]

                     = 200 %

Un tren de alta velocidad (TAV) o tren bala es aquel que alcanza velocidades iguales o superiores a 200 km/h. La energía que tiene el tren en su recorrido habitual es: *

Answers

Answer:

B. Cinética, debido a que esta energía está asociada con la velocidad que posee el tren.

Explanation:

Un tren de alta velocidad (TAV) o tren bala es aquel que alcanza velocidades iguales o superiores a 200 km/h. La energía que tiene el tren en su recorrido habitual es

A. Cinética, debido a que existen trenes elevados los cuales poseen altura y la altura está asociada con la energía cinética.

B. Cinética, debido a que esta energía está asociada con la velocidad que posee el tren.

C. Rápida, porque la energía cinética es sinónimo de rápido.

D. Potencial, debido a la potencia que tiene el tren para moverse.

Solution:

La energía cinética es la energía contenida en un objeto en movimiento. La energía cinética se puede definir como la cantidad de energía necesaria para que un objeto se acelere desde el reposo hasta su velocidad final.

La energía cinética (KE) viene dada por:

KE = (1/2) * masa * velocidad²

Podemos ver que la energía cinética depende de la masa del objeto y la velocidad del objeto.

El tren de alta velocidad posee energía cinética debido a la velocidad del tren.

two children of masses m1 = m2 = 20 kg , ride on the perimeter of a small merry-go- round . the merry -go-round us a disk of mass M = 30 kg answer

Answers

Answer:

c

Explanation:

Pls helppp. Is this right?

Answers

Answer:

yes you are totally right

Those are all correct great job!

An ant walks 15 m east, then 40 m north, and finally 20 m west. What is the total displacement from the starting point

Answers

Answer: 40.311 m

Explanation:

Given

Ant walks 15 m east

then 40 m North and finally 20 m west

from the figure, ant is 40 m North and 5 m west

Using Pythagoras, we can write

[tex]\Rightarrow d=\sqrt{40^2+5^2}\\\Rightarrow d=\sqrt{1625}=40.311\ m[/tex]

13.If a jet plane with a velocity of 20 m/s at t = 0 accelerates at a rate of 40 m/s²
for 3 seconds, what is its veloaty at time = 3 seconds?​

Answers

Answer:

140m/s

Explanation:

V=V0+at. V=20+40*3=140m/s

A force of 100N stretches an elastic string to a total length of 20cm. if an additional force of 100N stretches the spring 5 cm further, find the natural length of the spring if the elastic limit is not exceeded. Pls help ASAP​

Answers

Answer:

8cm

Explanation:

The general formula to find this is F/X where in this case the f is the total of the two forces (100+100) and x is the sum of the length ( 20+5) which together comes 200&25respectively then divide 200 with 25 which comes 8cm.

3. Determine the units of the quantity described by the following com-
binations of units:
a. kg (m/s) (1/s)
b. (kg/s) (m/s2)
c. (kg/s) (m/s)
d. (kg/s) (m/s)

Answers

B is the answer!! Hope this helps
Other Questions
As the student council treasurer, you prepare the budget for your class rafting trip. Each large raftcosts $100 to rent and each small raft costs $40 to rent. You have $1,600 to spend. Write andsolve a linear equation to find the number of small rafts you can rent if you rent 12 large rafts. The organism used in bread making is?(a) Yeast(b) Aspergillus(c) Mushroom(d) Rhizobium As Carlos and Manual both push a 4 kg box to the right across a rough floor, the box speeds up at a rate of 2.0 m/s2.(Hint, this is the acceleration.) If you assume that Manual pushes with a force strength of 8.0 N and the friction force of the floor on the box is 5.0 N, then what is the strength of the force that Carlos pushes on the box Find the volume of the cone th=20 in and r=8 in. Solve in terms of pi and round off the decimal to thenearest tenths. 1.------- coutes cette jupes ? 20 eurosCombien or Comment Calculate the approximate initial boiling point (in oC) of a solution of 285 g ofmagnesium chloride in 2.0 kg of water. The kb of water is (0.52C/m) currently kidnapped at the moment :( thought he was finna give me candy.. Find the volume of the composite figure. First, find the volume of the triangular prism. Triangular prism Volume = [?] ft 8 ft Rectangular prism Volume = [ ] ft 10 ft Total Volume of Composite Figure = [ ] ft 14 ft 10 ft PLEASE HELP I"LL GIVE YOU BRAINLY!!!! everyone respect a virtuous soul into passive voice Which of the following statements is true?A. An object with stored energy cannot have mechanical energy..An object with mechanical energy is always able to perform work.C. An object with potential energy is always in motion.D An object with kinetic energy is always positioned above the ground. how do you use models to add and subtract fractions that have different denominators? Use of chemical fertilizers help in conservation caring of earth. elaborate the statement The figure below shows a shaded region and a non-shaded region. Angles in the figure that appear to be right angles are right angles.What is the area, in square feet, of the shaded region?What is the area, in square feet, of the non-shaded region? The narrator's passion for playingthe piano is best expressedthrough -A the fascination with theinstructor's energeticdemonstrationB her honesty whendiscussing her interestswith her fatherC her concentration onlearning the specifictechniques presented bythe instructorD. Her enthusiasm in describing what she thinks it would be like to play the instrument More a question for guys Does a girl body type really matter like skinny or stuff like that find the value of each variable, please explain. If you were solving for y what would the first step? -5=y-7/9 Triangle A'B'C' is the image of ABC under a dilation with a scale factor of 2. What length of segment A'B? Whats 8 in ratio 1:1 Im stuck ?