Answer: Echolocation
Explanation:
When a +0.00235 C charge
moves from point A to point B, its
electric potential energy increases
by 0.418 J. What is the potential
difference between A and B?
Include the correct sign, + or -.
(Unit = V)
Answer:
177.87
Explanation:
acellus
The potential difference between the points A and B is 177.9 V.
What is meant by potential difference ?Potential difference between any two points is the amount of work required to move a unit positive charge along any path from point A to point B without accelerating is referred to as the electric field.
Here,
The charge on the particle, q = +0.00235 C
The change in electric potential energy, ΔU = 0.418 J
The potential difference can be defined as the electric potential energy per unit charge.
Therefore, the potential difference between A and B,
V = ΔU/q
V = 0.418/0.00235
V = 177.9 Volt
Hence,
The potential difference between the points A and B is 177.9 V.
To learn more about potential difference, click:
https://brainly.com/question/23716417
#SPJ2
PLEASE HELP 20 POINTS AND BRAINLIEST.
Answer:
line c represents slowing
line b represents constant speed
like a represents speeding up
For a total of 8 hours, Erica rode her motorcycle down a freeway at 80 kilometers per hour.
There was a car behind her for one-quarter of that time. How far did Erica ride while the car
was behind her?
A 0.1 kg mass is connected to a spring with a spring constant of 100 N/m. The spring is
stretched a displacement of 0.2 meters and released. What is the total energy in this system?*
(1 Point)
2.0)
4.0J
10.0)
20.03
Answer:
[tex]2.0\:\mathrm{J}[/tex]
Explanation:
The elastic potential energy of a spring is given by:
[tex]U_s=\frac{1}{2}kx^2[/tex], where [tex]k[/tex] is the spring constant and [tex]x[/tex] is the displacement from equilibrium.
Solving for [tex]U_s[/tex], we get:
[tex]U_s=\frac{1}{2}\cdot 100\cdot 0.2^2,\\U_s=\boxed{2.0\:\mathrm{J}}[/tex]
Please answer this!!! I will give brainliest!!!
Answer:
The last one
Explanation:
Answer:
The dotted line from the earth to the moon represents your line of sight when looking at the moon. ... So the basic explanation is that the lunar phases are created by changing angles (relative positions) of the earth, the moon and the sun, as the moon orbits the earth
Explanation:
A force transmitted through a string or rope is called what
Answer:
Tension force
Explanation:
Have a good day :)
Answer:
The tension force is the force that is transmitted through a string, rope, cable or wire when it is pulled tight by forces acting from opposite ends.
Which of the following actions may help to prevent a rear-end collision?
rolling forward if there is room
pumping the brake to make the brake lights flash
rolling forward if the front zone is clear
all of the above
8. What is the total mechanical energy of a penny dropped off of the top of the Empire
State Building if it has a potential energy of 47 J, and a kinetic energy of 23 J?
A.18J
B.24 J
C.70 J
D.667 J
Answer:
C 70 Joules because all of the energy of converted to potential energy.
A scientist told his student assistants that he had sorted groups of mice by their intelligence and asked the assistants to assess the groups’ maze-solving abilities. The scientist had not actually sorted the mice by intelligence. The students rated the “highest intelligence” group of mice as the best maze solvers and the “lowest intelligence” group as the worst maze solvers. What was the scientist trying to demonstrate by doing this experiment?
Experimental subjects should never be put into groups.
Mice should not be judged by their intelligence.
Higher intelligence mice are better maze solvers.
People can introduce their own biases into an experiment.
Answer: People can introduce their own biases into an experiment.
Explanation:
The scientist had not actually sorted the mice in terms of intelligence which means that the rats in all the groups possessed the same intelligence on average yet the students after assessment, still corroborated his false narrative by stating that the more intelligent mice were better at solving mazes.
This means that somehow, they must have altered the assessment to fit the narrative of the scientist and they might have done this either consciously or unconsciously. This therefore shows that people will usually introduce their own biases into an experiment in order for it to turn out a certain way.
Answer:
D
Explanation:
Edge 2020
A student reads that nanosilver particles are used in cosmetics to allow nutrients to penetrate deeper into the skin. When the cosmetics are washed off, the nanosilver particles can enter freshwater ecosystems. These particles may decrease survival in many aquatic organisms. The student determines that Daphnia magna, a tiny freshwater crustacean widely found in North America, might make a good test subject for an experiment.
Which statement below is the most likely testable hypothesis based on the information provided?
A. When the concentration of nanosilver particles in water and the temperature of water are both increased, the population of Daphnia magna will decrease.
B. When the concentration of nanosilver particles in water and the temperature of water are both increased, the population of Daphnia magna will decrease.
C. When the concentration of nanosilver particles in water is increased, the population of Daphnia magna will adapt to new conditions and become a new species.
D. When the concentration of nanosilver particles in water is decreased, the population of aquatic organisms that feed on Daphnia magna will increase.
Answer: When the concentration of nanosilver particles in water is increased, the population of Daphnia magna will decrease
Explanation:
The statement below that is the most likely testable hypothesis based on the information provided is that when there is an increase in the concentration of nanosilver particles in water, the population of Daphnia magna will decrease.
Since we are informed that the particles may decrease survival in many aquatic organisms, it simply means that an increase in the particles in water will bring about the decrease in the Daphnia magna, which is the tiny freshwater crustacean.
I WILL MARK YOU THE BRAINLIEST NO LINKS
_____________ is the rubbing force that acts against motion between two touching surfaces.
Inertia
Friction
Momentum
Acceleration
Answer:
friction
Explanation:
when 2 plates rub againts each other it makes friction same as in the earth. EXAMPLE just like how you rub your hands together
Answer:
Friction
Explanation:
Which of these would be caused by a chemical change?
A)
The formation of lava.
B)
Sedimantary rock layering over time,
C)
Metamorphic rock forming from igneous.
D)
Metamorphic rock eroding to form sedimentary rock.
Answer:
The answer is C!
Metamorphic rock forming from igneous.
Hope this helps you! :))
Which weather event is most likely to occur if there are warmer than average ocean waters in the Pacific? Group of answer choices Flooding in the southern United States due to El Niño Wet conditions in the Pacific Northwest due to El Niño Weak trade winds due to La Niña Drought in the southern United States due to La Niña
Answer:
Flooding in the southern United States due to El Nino
Explanation:
An El Nino is said to be taking place during the period of a rise in the temperature of the water at the equatorial Pacific above average combined with a weaker than normal east winds.
The opposite condition is La Nina
The effects of an El Nino includes an higher amount of rainfall and can sometimes cause destructive flooding which is observed in the Southern United States from during the fall through spring
The weather that is most likely to occur if there are warmer than average ocean waters in the pacific is flooding due to El Nino in the southern United States.
If the light rays in the incident ray originate at 20º from the surface...
What is the angle for the incident ray?
a.) 10 degrees
b.) 20 degrees
c.) 40 degrees
d.) 70 degrees
e.) 90 degrees
What is the angle for the reflected ray?
a.) 10 degrees
b.) 20 degrees
c.) 40 degrees
d.) 70 degrees
e.) 90 degrees
Can someone help me with this please? Thank you!
Given :
The light rays in the incident ray originate at 20º from the surface.
To Find :
The angle for the incident ray.
Solution :
We know angle of incidence is measured from perpendicular to the surface .
So,
[tex]\theta_i = 90^o - 20^o\\\\\theta_i = 70^o[/tex]
Now, we know by law of reflection :
Angle of reflection = Angle of incident
[tex]\theta_r = 70^o[/tex]
Therefore, the angle of incident and reflection is 70° each.
If the voltage of your circuit is 36 volts and the current is 9 amps what is the resistance?
Aswer:
To find the resistance of a circuit, Ohm's law is used:
[tex]\boxed{\mathbf{R= V \ / \ i }}[/tex]
Taking as data:
Volts(v) = 36
Current(I) = 9 amps
Resistance(r) = ¿?
We replace according to the formula:
v/i = r
[tex]\mathbf{{36 \ / \ 9 = 4}}[/tex]
Result: The resistance of the circuit is 4 Ohms.
If two vectors are 7 cm and 5 cm .then what's the addition of these two?
Answer:
7 + 5 = 12
7 + 5 = 12
Explanation:
Since it asks for 2 vectors, you have to add 2 times.
Explain what superconductivity is and how it was discovered.
Answer:
Superconductivity is a phenomenon whereby a charge moves through a material without resistance. In theory this allows electrical energy to be transferred between two points with perfect efficiency, losing nothing to heat it was discovered on April 8, 1911 by Heike Kamerlingh Onnes, who was studying the resistance of solid mercury at cryogenic temperatures using the recently produced liquid helium as a refrigerant. At the temperature of 4.2 K, he observed that the resistance abruptly disappeared.
Explanation:
yeah
what are the effects of atmospheric pressure
Answer:
Cloudiness, Wind, and Precipitation. There's more effects produced because of force is more if the surface of the area is smaller, and less when the surface is larger. It also affects weather, it can be measured with a barometer.
Explanation:
Which change corrects the error in his steps?
Charlie writes the steps shown to describe the use
of a transistor in a closed circuit with flowing current.
Using a Transistor to Amplify a Signal
1. Current (1) flows from the base to the emitter.
2. An input causes a small increase in voltage
across the base and emitter.
3. Ji increases a small amount.
4. Current (12) flowing from the emitter to the
collector changes a large amount.
O Change the title to "Using a Transistor as a
Switch."
O Change step 1 to say that no current flows in the
transistor at the start.
O Reverse the sizes of the changes in current in
steps 3 and 4.
O Reverse the direction of current in step 4.
Answer:
answer is D
Explanation:
took test and got 100%
The change that corrects the error in his steps is reverse the direction of current in step 4.
What is amplifier?An amplifier, is an electronic device that can be used to increase output power.
Observed steps in using a transistor to Amplify a SignalCurrent (1) flows from the base to the emitter. An input causes a small increase in voltage across the base and emitter. Ji increases a small amount.Current (2) flowing from the emitter to the collector changes a large amount.Thus, the change that corrects the error in his steps is reverse the direction of current in step 4.
Learn more about amplifier here: https://brainly.com/question/842936
#SPJ9
How does the intensity of light change for a location depending on the season?
Answer:
The intensity of light can change with the time of the day, season, geographic location, distance from the equator, and weather. It gradually increases from sunrise to the middle of the day and then gradually decreases toward sunset; it is high during summer, moderate in spring and fall, and low during winter time.
Explanation:
translational movement with the tilt of the earth's axis we can explain the change in intensity that an area receives determined with the weather station.
In summer the axis points to the sun, which is why more intensity per unit area arrives. In winter the axis moves away from the sun intensity per unit area is less
The intensity of the radiation is defined by the relationship between the power on the irradiated surface
I = P / A
where I is the intensity, P is the power emitted by the sun and A is the area.
The intensity of the radiation that reaches it is around 1400 W / m² in the upper part of the Earth's atmosphere, this amount varies slightly when the planet passes from its furthest point from the sun to its closest point, that is, perihelion to aphelion.
The most important variation of this intensity is due to the fact that it has its axis inclined and the normal to the area changes in relation to the incident radiation during the translational movement around the sun.
In the summer the axis of the earth is inclined towards the sun, so the rays fall more perpendicularly, therefore their absorption over the area is maximum and the temperature rises.
In winter, the earth's axis is tilted away from the sun, so the rays they carry are distributed over a larger surface area and therefore less energy is absorbed per unit area and the temperature decreases.
In the spring and autumn seasons, the Earth's axis is almost vertical, so the absorption is intermediate and the temperature of the Earth is between the two maximums.
Using an analysis of the translational movement with the inclination of the earth's axis, we can explain the change in intensity received by an area determined with the weather station.
To learn more about solar intensity here: brainly.com/question/14375282
hello please help i’ll give brainliest
Answer:
First answer.
Explanation:
There may be a 5N force, but if the frictional force also equals 5N, than they cancel eachother out, resulting in the brick still staying still, as it is resting on a (perfectly) level surface, but any amount of force would make the brick move.
You walk 200m south, then 50m east. What is your displacement?
B. Direction: In each of the following situations, identify the method of heat transfer that takes place
(conduction, convection, or radiation).
1. Hot milk is stirred with a spoon, later the spoon gets hot
2. The air near the ceiling of a closed room is warmer, because the warm air rises.
3. You are doing artwork at your table near a lamp, you start to feel hotter.
4. During nighttime, the cool air from the land moves toward the sea to replace the rising warm air.
5. In a pool, the water near the surface is slightly warmer.
6. The washed clothes under the sun dries up.
7. The scouts stand near a bonfire during their camping-
8. Fish is cooked over a hot pan.
9. Iron nail being heated in a candle.
10. A boy playing outside starts to feel hotter.
Answer:
1) Conduction
2)Covection
3)Radiation
4)Convection (Land breeze one of the application of convection of heat)
5) Convection
6)Radiation
7) Radiation
8)Conduction
9) Conduction
10) Radiation
Hope it helps
When entering an expressway, in the acceleration lane you should: A search for a gap in traffic and adjust your speed to the speed of the traffic. B set the cruise control for highway speed. C make a complete stop and check traffic for a suitable gap. D get as close to the vehicle ahead as possible so you can merge into the same gap.
Answer:A
Explanation: search for a gap in traffic and adjust your speed to the speed of the traffic.
In which stars will you likely find fusion of heaveir elements such as helium and oxygen
Which of the following has the most energy?
X-rays
radio waves
ultraviolet radiation
infrared radiation
Which of the following descriptions apply to the Milky Way galaxy
A 5V battery is connected to a resistor, 2A of current flows through the resistor. What is the resistance in Ohms
Answer:
V=IR
5. = 2× RESISTANCE
RESISTANCE=5/2
=2.5 Ohms
what causes you to get warm if you stand bear a fire ? A . Transmission B . Radiation C . Convection D . Conduction
Answer:
B
Explaination:
Radiation refers to the emission of energy in rays or waves. Heat moves through space as energy waves.
Answer:
Radiation
Explanation:
Heat can be transferred though thin air
A wave is moving at the rate of 40 cm/s. Its wavelength is 5 cm. What is the frequency of the wave? INCLUDE THE CORRECT UNIT!
Answer:
Solution given:
velocity=40cm/s
wave length=5cm
we have
frequency =velocity/wavelength=40/5=8hertz.
the frequency of the wave is 8 hertz.