Answer:
I hope it helps u
Explanation:
The advantages of using natural gas rather than coal are the following,
Natural gas is present in large amount than coal.Natural gas is less costly than other fossil fuel sources of energy. It increases security by decreasing dependence.Natural gas is more environmentally friendly.Natural gas is much safer to store.It is reliable.Natural gas is a fossil fuel, though the global warming emissions from its combustion are much lower than those from coal or oil.Natural gas emits 50 to 60 percent less carbon dioxide (CO2) when combusted in a new, efficient natural gas-power plant compared with emissions from a typical new coal plant.What is the cost in dollars for the nails used to build a fence 80 meters long if it requires 30 nails per meter? There are 40 nails per box at a cost of 75 cents per box
Answer:
4500 cent
Explanation:
From the question, we were told that
a fence 80 meters long requires 30 nails per meter.
1 metre fence = 30 nails
Then 80 meters long= ( 30 × 80)
= 2400 nails
Which means a fence 80 meters long will require 2400 nails in total.
We need to find the cost in dollars for the nails to build a fence 80 meters long.
We know that 40 nails per box will cost 75 cents per box.
(2400 nails/40 nail per box)= 60 box
Then 60 box will be needed to complete the fence.
the cost in dollars for the nails to build a fence 80 meters long= (60 box × 75 cent per box)=4500 cent
Where does the energy of a nuclear power plant come from?
A) the radiation released by unstable uranium isotopes
B) the heat energy released during nuclear fusion
C) the radiation released when hydrogen fuses into helium
D) the heat energy released during nuclear fission
Answer:
The heat energy released during nuclear fusion
The heat energy released during nuclear fusion. The correct option is D.
Thus, The Sun and other stars are powered by nuclear fusion reactions. A heavier nucleus is created when two light nuclei fuse together in a fusion reaction.
Because the mass of the resulting single nucleus is smaller than the combined mass of the two initial nuclei, the process produces energy. Remaining mass is converted to energy.
Why this happens is explained by Einstein's equation (E=mc2), which states in part that mass and energy can be transformed into one another. Fusion energy could be a significant source of energy generation if scientists can figure out how to use it in equipment on Earth.
Thus, The heat energy released during nuclear fusion. The correct option is D.
Learn more about Nuclear fusion, refer to the link:
https://brainly.com/question/33558814
#SPJ2
What is the number of electronsin hydrogen
Answer:
There's only one electron in hydrogen.
Answer:
Hydrogen contain 1 electron
Explanation:
In every chemical reaction that produce energy, ____ react with ________ ?
Answer:
Acid reacts with water?
Explanation:
What are the pros and cons of cloning a mammoth?
Answer:
List of Pros of Cloning
They could have a positive impact on the environment. ...
They would help us understand them better. ...
They can help us protect species that are close to extinction. ...
It makes us feel better for driving most of these species into extinction. ...
List of Cons of Cloning
We will be bringing back a species into an environment totally different from the one they lived in.
It puts the conservation of currently endangered species way back.
Why are bubbles and color changes not always chemical change?
Determine the number of valence electrons for following (Ne) 3s2 3p4
a.3
b.2
c.4
d.7
e.16
f.6
Pls help
Answer:
F. 6
Explanation:
Help, please, I really need it.
Answer:
CO(g) + H2O(g) ⇌ CO2(g) + H2(g)
15 grams of hydrogen and 7.5 grams of oxygen were placed in a beaker. An explosion happened inside the baker that produced water. The beaker was never opened. How many grams of water were produced?
Answer:
16.8768 g
Explanation:
The reaction that takes place is:
2H₂ + O₂ → 2H₂OFirst we convert the mass of hydrogen and oxygen into moles, using their respective molar masses:
H ⇒ 15 g ÷ 1 g/mol = 15 mol HO ⇒ 7.5 g ÷ 16 g/mol = 0.4688 mol OThere are significantly less oxygen moles than hydrogen moles, so oxygen is the limiting reactant.
We calculate the produced moles of water, using the moles of the limiting reactant:
0.4688 mol O * [tex]\frac{2molH_2O}{1molO_2}[/tex] = 0.9376 mol H₂OFinally we convert water moles into grams, using its molar mass:
0.9376 mol H₂O * 18 g/mol = 16.8768 ghelp!!
The volume of air in the lungs of a typical human is 6.0 L. Traditional free divers, known for their ability to hold their breath during long dives while gathering objects from the ocean bottom, could descend underwater to a depth of 30 m where the pressure is four times that at the surface. What would be the volume of air in their lungs at 30 m?
please!!
Answer: these are for questions 1,2,4,5,7
Explanation: number 3: as the pressure in the volume decreases, the volume increases causing it to expand and eventually blow.
number 6: because the temperature and the amount of gas don’t change, these terms don’t appear in the equation. What Boyle’s law means is that the volume of a mass of gas is inversely proportional to its pressure. This linear relationship between pressure and volume means doubling the volume of a given mass of gas decreases its pressure by half.
hope this helps :))
What is the asthenosphere?
Question 3 options:
The hot, rigid inner part of the upper mantle which can’t flow
The hot, weak inner part of the upper mantle which can flow
The hot, weak outer part of the lower mantle
None of the above
Answer:
None of the Above
Explanation:
The Athenosphere is able to flow but is also part of the UPPER LAYER meaning none of these choices are correct
3. Which of the following items is representative of a homogeneous
mixture?
2 points
A. spaghetti & meatballs
B. cheeseburger
C. white bread dough
D. smoothie
E. Both A and B
O F. Both C and D
4. Which of the following is a chemical property of matter?
Answer: F. both c and d
Explanation:
homogeneous mixture is of same kind/phase. so the most appropriate answer we can take is smoothie and white bread dough :)
determine the hydronium ion concentration of an aqueous solution that has a pH of 4.0
Answer:
Imagewww.chem.purdue.edu › Equilibrium
Calculating the Hydroxide Ion Concentration from pOH
To calculate the pH of an aqueous solution you need to know the concentration of the hydronium ion in moles per liter ...
Calculating pH
Calculating hydronium ion ...
Calculating pOH
Calculating hydroxide ion ...
Calculating pKa
People also ask
How do you find hydronium ion concentration when given pH?
The hydronium ion concentration can be found from the pH by the reverse of the mathematical operation employed to find the pH. [H3O+] = 10-pH or [H3O+] = antilog (- pH) Example: What is the hydronium ion concentration in a solution that has a pH of 8.34? On a calculator, calculate 10-8.34, or "inverse" log ( - 8.34).
The diagram shows a homemade car being pushed with a force of 25 N. The force causes the car to move at a constant speed of 3 m/s2. What will happen if the force is changed to 35 N?
Answer:
The acceleration of the car will increase drastically
Explanation:
Based on newtons second law of motion, the force applied on a body is directly proportional to the product of its mass and acceleration;
Force = mass x acceleration
Since the mass of the car is constant, an increase in force will cause an increase in acceleration.
A decrease in the force will impact a lesser acceleration on the motor car.
This way, the change in velocity of the body per unit of time will increase drastically.
what are the uses of glycerin?
Explanation:
This medication is used as a moisturizer to treat or prevent dry, rough, scaly, itchy skin and minor skin irritations (e.g., diaper rash, skin burns from radiation therapy). Emollients are substances that soften and moisturize the skin and decrease itching and flaking.
Metals in general have:
a. High electrical conductivity
b. High thermal conductivity
c. High density
d. All of the above
Answer:
d. All of the above
Explanation:
how ferons is responsible for depletion of ozone layer?
What is the difference between the Lewis model and the valence-shell electron pair repulsion (VSEPR) model?
A.
Only the Lewis model shows the covalent bonds in a molecule.
B.
Only the VSEPR model can be used to explain intermolecular forces.
C.
Only the Lewis model takes into account unbonded electrons.
D.
Only the VSEPR model shows the geometric shape of a molecule.
Answer: only the VSEPR mode shows the geometric shape of a formula.
please help!!!
Decide which molecules in the simulation will represent the substances from the actual reaction. Include a strategy to deal with the difference in structure between the actual reaction N2 + 3H2 ⇌ 2NH3 and the simulated reaction. Not all molecules need to be used.
Answer:
I FINNALY GOT MY HANDS ON THE AWNSER, dont
copy word for word though Explanation:
Simulation of a reaction is a chemical reaction modeling or demonstration tool, using various software to better understand the molecular structure and the physical and chemical properties of the molecule. Here the actual reaction is N2 + 3H2 -----> 2NH3. In the simulation reactions, the nitrogen and hydrogen molecules in the actual reaction are described by different colored circles or dots and the bonds are produced using a single, double or triple line that touches each molecule and gives an appearance like the reactants and the products' ball and stick model. Example: Molecule of nitrogen as o---triple line---o. A molecule of hydrogen as O———O. Chemical symbols such as N and H are expressed in Actual Chemical Reaction, N2 and H2 and the bonds are represented by single, double or triple lines that do not impact the atoms in the molecule as follows: Nitrogen Molecule: N -triple Bond- N. Hydrogen Molecule: H - H.
Which is the greater mass?0.007960 grams or 0.7960 mg?
Answer: milligrams
Explanation:
Because 0.007960 = 1.75487961e-5 pounds
And 0.7960= 1.75488e-6
Mastering Problems
Balancing Chemical Equations (10.1)
71. Write skeleton equations for these reactions.
a. hydrogen iodide(g) → hydrogen(g) + iodine(g)
b. aluminum(s) + iodine(s) — aluminum iodide(s)
c. iron(II) oxide(s) + oxygen(g) -> iron(III) oxide(s)
a. HI(g) ⇒ H₂9g) + I₂(g)
b. Al(s) + I₂(s)⇒AlI₃(s)
c. FeO(s)+O₂(g)⇒Fe₂O₃(s)
Further explanationGiven
word equations
Required
skeleton equations
Solution
The skeleton equation shows the chemical formula of the reaction between reactants and products, regardless of the actual amount of the reacting compound (unbalanced reaction)
The skeleton equations :
a. HI(g) ⇒ H₂9g) + I₂(g)
b. Al(s) + I₂(s)⇒AlI₃(s)
c. FeO(s)+O₂(g)⇒Fe₂O₃(s)
A gas was at STP. If the pressure increased to 3.5 atm, what would the new
temperature be?
Answer:
T₂ = 956.0 K
Explanation:
Given data:
Initial temperature = 273.15 K
Initial pressure = 1 atm
Final pressure = 3.5 atm
Final temperature = ?
Solution:
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
1 atm / 273.15 K = 3.5 atm / T₂
T₂ = 3.5 atm ×273.15 K / 1 atm
T₂ = 956.0 atm. K / 1 atm
T₂ = 956.0 K
Chemistry Conversion: Convert 3.0099 dumps to wigs. 6375.23 dumps = 1 wig Round your answer to 5 sig figs. dumps and wigs is not a real unit just used for example.
Answer:
There are 0.00047212 wig in 3.0099 dumps.
Explanation:
In this problem, we need to convert 3.0099 dumps to wigs.
6375.23 dumps = 1 wig (given)
1 dump = (1/6375.23) wig
To convert 3.0099 dumps to wigs, multiply 3.0099 by (1/6375.23).
3.0099 dumps = [tex]\dfrac{1}{6375.23}\cdot3.0099[/tex]
= 0.00047 wig
Hence, there are 0.00047212 wig in 3.0099 dumps.
Which of the following measurements are required to find the work done on an object?
1. The mass and volume of the object
2. The volume of the object and the distance the object moved
3. The force exerted on the object and the distance the object moved
4. The force exerted on the object and the time it took to move the object
Answer:
1.p=mV................
which expression has a value of 10
A. (10+10)/5-3
B. (10+10)/(5-3)
C. (10+10/5)-3
D. 10+10/(5-3)
(math)
226
) Which equation represents the radioactive decay of Ra?
88
Answer:
A
Explanation:
The study of a chemical is called chemistry.
The correct answer is A
Radioactive decay is the process by which an unstable atomic nucleus loses energy by radiation. A material containing unstable nuclei is considered radioactive.
The radioactive of the Ra is option A that is:-
[tex]RA^{226}_{88}----->Rn^{222}_{86} +He^4_2[/tex].
During the decomposition, the element is breakdown into the neutron, proton, and electron.
Hence, the correct answer is A.
For more information, refer to the link:-
https://brainly.com/question/14698383
Which evidence shows that heat is given off when a candle burns?
A. A match is used to light the candle.
B. The burning candle produces a yellow flame.
O c. Covering the burning candle extinguishes the flame.
D. Solid candle wax near the flame melts as the candle burns.
thing
Answer:
D. solid candle wax near the flame melts as the candle burns.
Answer:
Part D, melting is a product of heating
Explanation:
21) What is the volume (inL) of 3470 g of liquid glycerol, which has a density of 1.26 g/?
Answer:
V = 2.75 L
Explanation:
Given that,
Mass of liquid glycerol, m = 3470 g
The density of liquid glycerol, d = 1.26 g/cm³
We need to find the volume of liquid glycerol.
We know that,
Density=mass/volume
[tex]V=\dfrac{m}{d}\\\\V=\dfrac{3470\ g}{1.26\ g/cm^3}\\\\V=2753.96\ cm^3[/tex]
We know that, 1 cm³ = 0.001 L
V = 2.75 L
So, the volume of liquid glycerol is 2.75 L.
Define chemical reaction
Answer:
a process that involves rearrangement of the molecular or ionic structure of a substance, as distinct from a change in physical form or a nuclear reaction.
A chemical reaction rearranges the constituent atoms of the reactants to create different substances as products.
hope this helps ^^
PLEASE HELP I REALLY CANT FAIL THIS. THIS DETERMINS IF I PASS MY GRADE. What are the most basic building blocks of all organisms?
OA.
blood
ОВ.
tissue
OC.
cells
OD
organs
Answer:
Cells are the basic building blocks of living things.
Explanation:
So the answer is cells because it is composed of trillions of cells, all with their own specialised function. Cells are the basic structures of all living organisms.
I hope this helps you pass and humble yourself you will get to it, you got this!!!
Answer:
Cells are the most basic building blocks
Explanation:
Tissues are made out of cells. Organs are made out of tissues.