There is only one possible state: constant uniform motion. That means constant speed in a straight line.
(If the constant speed happens to be zero, this description also covers the case where the object isn't moving. That special case is called "at rest".)
Answer:
at restzero accelerationconstant speedHope this helps
A man stands on a platform that is rotating (without friction) with an angular speed of 1.2 rev/s; his arms are outstretched and he holds a brick in each hand.The rotational inertia of the system consisting of the man, bricks, and platform about the central vertical axis of the platform is 6.0 k g times m squared. If by moving the bricks the man decreases the rotational inertia of the system to 2.0 k g times m squared, what is the resulting angular speed of the platform in rad/s
Answer:
resulting angular speed = 3.6 rev/s
Explanation:
We are given;
Initial angular speed; ω_i = 1.2 rev/s
Initial moment of inertia;I_i = 6 kg/m²
Final moment of inertia;I_f = 2 kg/m²
From conservation of angular momentum;
Initial angular momentum = Final angular momentum
Thus;
I_i × ω_i = I_f × ω_f
Making ω_f the subject, we have;
ω_f = (I_i × ω_i)/I_f
Plugging in the relevant values;
ω_f = (6 × 1.2)/2
ω_f = 3.6 rev/s
Two small pith balls, each of mass m = 14.2 g, are suspended from the ceiling of the physics lab by 0.5 m long fine strings and are not moving. If the angle which each string makes with the vertical is θθ = 29.1°, and the charges on the two balls are equal, what is the magnitude of that charge
Answer:
1.424 μC
Explanation:
I'm assuming here, that the charged ball is suspended by the string. If the string also is deflected by the angle α, then the forces acting on it would be: mg (acting downwards),
tension T (acting along the string - to the pivot point), and
F (electric force – acting along the line connecting the charges).
We then have something like this
x: T•sin α = F,
y: T•cosα = mg.
Dividing the first one by the second one we have
T•sin α/ T•cosα = F/mg, ultimately,
tan α = F/mg.
Since we already know that
q1=q2=q, and
r=2•L•sinα,
k=9•10^9 N•m²/C²
Remember,
F =k•q1•q2/r², if we substitute for r, we have
F = k•q²/(2•L•sinα)².
tan α = F/mg =
= k•q²/(2•L•sinα)² •mg.
q = (2•L•sinα) • √(m•g•tanα/k)=
=(2•0.5•0.486) • √(0.0142•9.8•0.557/9•10^9) =
q = 0.486 • √(8.61•10^-12)
q = 0.486 • 2.93•10^-6
q = 1.424•10^-6 C
q = 1.424 μC.
The barricade at the end of a subway line has a large spring designed to compress 2.00 m when stopping a 1.10 ✕ 105 kg train moving at 0.350 m/s. (a) What is the force constant (in N/m) of the spring? N/m (b) What speed (in m/s) would the train be going if it only compressed the spring 0.600 m? m/s (c) What force (in N) does the spring exert when compressed 0.600 m? 2020 N (in the direction opposite to the train's motion)
Answer:
(a) k = 1684.38 N/m = 1.684 KN/m
(b) Vi = 0.105 m/s
(c) F = 1010.62 N = 1.01 KN
Explanation:
(a)
First, we find the deceleration of the car. For that purpose we use 3rd equation of motion:
2as = Vf² - Vi²
a = (Vf² - Vi²)/2s
where,
a = deceleration = ?
Vf = final velocity = 0 m/s (since, train finally stops)
Vi = Initial Velocity = 0.35 m/s
s = distance covered by train before stopping = 2 m
Therefore,
a = [(0 m/s)² - (0.35 m/s)²]/(2)(2 m)
a = 0.0306 m/s²
Now, we calculate the force applied on spring by train:
F = ma
F = (1.1 x 10⁵ kg)(0.0306 m/s²)
F = 3368.75 N
Now, for force constant, we use Hooke's Law:
F = kΔx
where,
k = Force Constant = ?
Δx = Compression = 2 m
Therefore.
3368.75 N = k(2 m)
k = (3368.75 N)/(2 m)
k = 1684.38 N/m = 1.684 KN/m
(c)
Applying Hooke's Law with:
Δx = 0.6 m
F = (1684.38 N/m)(0.6 m)
F = 1010.62 N = 1.01 KN
(b)
Now, the acceleration required for this force is:
F = ma
1010.62 N = (1.1 kg)a
a = 1010.62 N/1.1 x 10⁵ kg
a = 0.0092 m/s²
Now, we find initial velocity of train by using 3rd equation of motion:
2as = Vf² - Vi²
a = (Vf² - Vi²)/2s
where,
a = deceleration = -0.0092 m/s² (negative sign due to deceleration)
Vf = final velocity = 0 m/s (since, train finally stops)
Vi = Initial Velocity = ?
s = distance covered by train before stopping = 0.6 m
Therefore,
-0.0092 m/s² = [(0 m/s)² - Vi²]/(2)(0.6 m)
Vi = √(0.0092 m/s²)(1.2 m)
Vi = 0.105 m/s
A long cylindrical rod of diameter 200 mm with thermal conductivity of 0.5 W/m⋅K experiences uniform volumetric heat generation of 24,000 W/m3. The rod is encapsulated by a circular seeve having an outer diameter of 400 mm and a thermal conductivity of 4 W/m⋅K. The outer surface of the sleeve is exposed to cross flow air at 27∘C with a convection coefficient of 25 W/m2⋅K.
(a) Find the temperature at the interface between the rod and sleeve and on the outer surface.
(b) What is the temperature at the center of the rod?
Answer:
a, 71.8° C, 51° C
b, 191.8° C
Explanation:
Given that
D(i) = 200 mm
D(o) = 400 mm
q' = 24000 W/m³
k(r) = 0.5 W/m.K
k(s) = 4 W/m.K
k(h) = 25 W/m².K
The expression for heat generation is given by
q = πr²Lq'
q = π . 0.1² . L . 24000
q = 754L W/m
Thermal conduction resistance, R(cond) = 0.0276/L
Thermal conduction resistance, R(conv) = 0.0318/L
Using energy balance equation,
Energy going in = Energy coming out
Which is = q, which is 754L
From the attachment, we deduce that the temperature between the rod and the sleeve is 71.8° C
At the same time, we find out that the temperature on the outer surface is 51° C
Also, from the second attachment, the temperature at the center of the rod was calculated to be, 191.8° C
The cart travels the track again and now experiences a constant tangential acceleration from point A to point C. The speeds of the cart are 4.50 m/s at point A and 5.00 m/s at point C. The cart takes 4.00 s to go from point A to point C, and the cart takes 1.60 s to go from point B to point C. What is the cart's speed at point B
Answer:
Vi = 4.8 m/s
Explanation:
First we need to find the magnitude of constant tangential acceleration. For that purpose we use the following formula between points A and C:
a = (Vf - Vi)/t
where,
a = constant tangential acceleration from A to C = ?
Vf = Final Velocity at C = 5 m/s
Vi = Initial Velocity at A = 4.5 m/s
t = time taken to move from A to C = 4 s
Therefore,
a = (5 m/s - 4.5 m/s)/4 s
a = 0.125 m/s²
Now, applying the same equation between points B and C:
a = (Vf - Vi)/t
where,
a = constant tangential acceleration from A to B = 0.125 m/s²
Vf = Final Velocity at C = 5 m/s
Vi = Initial Velocity at B = ?
t = time taken to move from B to C = 1.6 s
Therefore,
0.125 m/s² = (5 m/s - Vi)/1.6 s
Vi = 5 m/s - (0.125 m/s²)(1.6 s)
Vi = 4.8 m/s
Consider two identical springs. At the start of an experiment, Spring A is already stretched out 3 cm, while Spring B remains at the zero position. Both springs are then stretched an additional three centimeters. What conclusion can you draw about the force required to stretch these springs during the experiment
Answer:
Explanation:
In this interesting exercise we have that spring A is 3 cm longer, due to previous experiments if these experiments did not reach the non-linear elongation point, the cosecant Km of the spring must remain the same, therefore when we lengthen the two springs these the longitudinal are lengthened.
As a consequence of the above according to Hockey law, the prediction of lengthening is the same, therefore the outside is the same in two two systems
F = K Δx
One kind of baseball pitching machine works by rotating a light and stiff rigid rod about a horizontal axis until the ball is moving toward the target. Suppose a 144 g baseball is held 82 cm from the axis of rotation and released at the major league pitching speed of 87 mph.
Required:
a. What is the ball's centripetal acceleration just before it is released?
b. What is the magnitude of the net force that is acting on the ball just before it is released?
Answer:
a. ac = 1844.66 m/s²
b. Fc = 265.63 N
Explanation:
a.
The centripetal acceleration of the ball is given as follows:
ac = v²/r
where,
ac = centripetal acceleration = ?
v = speed of ball = (87 mph)(1 h/ 3600 s)(1609.34 m / 1 mile) = 38.9 m/s
r = radius of path = 82 cm = 0.82 m
Therefore,
ac = (38.9 m/s)²/0.82 m
ac = 1844.66 m/s²
b.
The centripetal force is given as:
Fc = (m)(ac)
Fc = (0.144 kg)(1844.66 m/s²)
Fc = 265.63 N
3.Cuanto Calor pierden 514 ml de agua si su temperatura desciende de 12°C a 11°C. Expresa el resultado en calorias.
514 cal
51.4 Kcal
514J/cal
5.149 Cal
Answer:
514 cal
Explanation:
In order to calculate the lost heat by the amount of water you first take into account the following formula:
[tex]Q=mc(T_2-T_1)[/tex] (1)
Q: heat lost by the amount of water = ?
m: mass of the water
c: specific heat of water = 1cal/g°C
T2: final temperature of water = 11°C
T1: initial temperature = 12°C
The amount of water is calculated by using the information about the density of water (1g/ml):
[tex]m=\rho V=(1g/ml)(514ml)=514g[/tex]
Then, you replace the values of all parameters in the equation (1):
[tex]Q=(514g)(1cal/g\°C)(11\°C-12\°C)=-514cal[/tex]
The amount of water losses a heat of 514 cal
A total charge Q is distributed uniformly over a large flat insulating surface of area A . If the electric field magnitude is equal to 1000 NC/ at a point located a perpendicular distance of 0.1 m away from the center of the sheet, then the electric field at a point a perpendicular distance 0.2 m from the center of the sheet is:_______
a. 1000N/C
b. 500N/C
c. Impossible to say since we are not given Q and A
d. 250 N/C
Answer:
a. 1000N/C
Explanation:
Data mentioned in the question
Electrical field magnitude = 1000 NC
Perpendicular distance = 0.1 m
Perpendicular distance = 0.2 m
Based on the above information, the electric field is
As we know that
[tex]E = \frac{\sigma}{2\times E_o}[/tex]
where,
[tex]\sigma[/tex] = surface charge density
E = distance from nearby point to sheet i.e be independent
The distance at 0.1 and 0.2, the electric field would remain the same
So,
Based on the above explanation, the first option is correct
a wall, a 55.6 kg painter is standing on a 3.15 m long homogeneous board that is resting on two saw horses. The board’s mass is 14.5 kg. The saw horse on the right is 1.00 m from the right. How far away can the painter walk from the saw horse on the right until the board begins to tip?
Answer:
0.15 m
Explanation:
First calculating the center of mass from the saw horse
[tex]\frac{3.15}{2} -1=0.575 m[/tex]
from the free body diagram we can write
Taking moment about the saw horse
55.9×9.81×y=14.5×0.575×9.81
y= 0.15 m
So, the painter walk from the saw horse on the right until the board begins to tip is 0.15 m far.
A brass ring of diameter 10.00 cm at 19.0°C is heated and slipped over an aluminum rod with a diameter of 10.01 cm at 19.0°C. Assuming the average coefficients of linear expansion are constant. What if the aluminum rod were 10.02 cm in diameter?
Answer:
the final temperature is [tex]\mathbf{T_f = -377.2^0 C}[/tex]
Explanation:
The change in length of a bar can be expressed with the relation;
[tex]\Delta L = L_f - L_i[/tex] ---- (1)
Also ; the relative or fractional increase in length is proportional to the change in temperature.
Mathematically;
ΔL/L_i ∝ kΔT
where;
k is replaced with ∝ (the proportionality constant )
[tex]\dfrac{ \Delta L}{L_i}=\alpha \Delta T[/tex] ---- (2)
From (1) ;
[tex]L_f = \Delta L + L_i[/tex] --- (3)
from (2)
[tex]{ \Delta L}=\alpha \Delta T*{L_i}[/tex] ---- (4)
replacing (4) into (3);we have;
[tex]L_f =(\alpha \Delta T*{L_i} ) + L_i[/tex]
On re-arrangement; we have
[tex]L_f = L_i + \alpha L_i (\Delta T )[/tex]
from the given question; we can say that :
[tex](L_f)_{brass}}} = (L_f)_{Al}[/tex]
So;
[tex]L_{brass} + \alpha _{brass} L_{brass}(\Delta T) = L_{Al} + \alpha _{Al} L_{Al}(\Delta T)[/tex]
Making the change in temperature the subject of the formula; we have:
[tex]\Delta T = \dfrac{L_{Al}-L_{brass}}{\alpha _ {brass} L_{brass}-\alpha _{Al}L_{Al}}[/tex]
where;
[tex]L_{Al}[/tex] = 10.02 cm
[tex]L_{brass}[/tex] = 10.00 cm
[tex]\alpha _{brass}[/tex] = 19 × 10⁻⁶ °C ⁻¹
[tex]\alpha_{Al}[/tex] = 24 × 10⁻⁶ °C ⁻¹
[tex]\Delta T = \dfrac{10.02-10.00}{19*10^{-6} \ \ {^0}C^{-1} *10.00 -24*10^{-6} \ \ {^0}C^{-1} *10.02}[/tex]
[tex]\Delta T[/tex] = −396.1965135 ° C
[tex]\Delta T[/tex] ≅ −396.20 °C
Given that the initial temperature [tex]T_i = 19^0 C[/tex]
Then ;
[tex]\Delta T = T_f - T_i[/tex]
[tex]T_f = \Delta T + T_I[/tex]
Thus;
[tex]T_f =(-396.20 + 19.0)^0 C[/tex]
[tex]\mathbf{T_f = -377.2^0 C}[/tex]
Thus; the final temperature is [tex]\mathbf{T_f = -377.2^0 C}[/tex]
A solenoidal coil with 23 turns of wire is wound tightly around another coil with 310 turns. The inner solenoid is 20.0 cm long and has a diameter of 2.20 cm. At a certain time, the current in the inner solenoid is 0.130 A and is increasing at a rate of 1800 A/s. For this time, calculate:
(a) the average magnetic flux through each turn of the inner solenoid;
(b) the mutual inductance of the two solenoids;
(c) the emf induced in the outer solenoid by the changing current in the inner solenoid.
Answer:
Explanation:
From the given information:
(a)
the average magnetic flux through each turn of the inner solenoid can be calculated by the formula:
[tex]\phi _ 1 = B_1 A[/tex]
[tex]\phi _ 1 = ( \mu_o \dfrac{N_i}{l} i_1)(\pi ( \dfrac{d}{2})^2)[/tex]
[tex]\phi _ 1 = ( 4 \pi *10^{-7} \ T. m/A ) ( \dfrac{310}{20*10^{-2} \ m }) (0.130 \ A) ( \pi ( \dfrac{2.20*10^{-2} \ m }{2})^ 2[/tex]
[tex]\phi_1 = 9.625 * 10^{-8} \ Wb[/tex]
(b)
The mutual inductance of the two solenoids is calculated by the formula:
[tex]M = 23 *\dfrac{9.625*10^{-8} \ Wb}{0.130 \ A}[/tex]
M = [tex]1.703 *10^{-5}[/tex] H
(c)
the emf induced in the outer solenoid by the changing current in the inner solenoid can be calculate by using the formula:
[tex]\varepsilon = -N_o \dfrac{d \phi_1}{dt}[/tex]
[tex]\varepsilon = -M \dfrac{d i_1}{dt}[/tex]
[tex]\varepsilon = -(1.703*10^{-5} \ H) * (1800 \ A/s)[/tex]
[tex]\varepsilon = -0.030654 \ V[/tex]
[tex]\varepsilon = -30.65 \ V[/tex]
Two guitarists attempt to play the same note of wavelength 6.50 cm at the same time, but one of the instruments is slightly out of tune. Consequently, a 17.0-Hz beat frequency is heard between the two instruments. What were the possible wavelengths of the out-of-tune guitar’s note? Express your answers, separated by commas, in centimeters to three significant figures IN cm.
Answer:
The two value of the wavelength for the out of tune guitar is
[tex]\lambda _2 = (6.48,6.52) \ cm[/tex]
Explanation:
From the question we are told that
The wavelength of the note is [tex]\lambda = 6.50 \ cm = 0.065 \ m[/tex]
The difference in beat frequency is [tex]\Delta f = 17.0 \ Hz[/tex]
Generally the frequency of the note played by the guitar that is in tune is
[tex]f_1 = \frac{v_s}{\lambda}[/tex]
Where [tex]v_s[/tex] is the speed of sound with a constant value [tex]v_s = 343 \ m/s[/tex]
[tex]f_1 = \frac{343}{0.0065}[/tex]
[tex]f_1 = 5276.9 \ Hz[/tex]
The difference in beat is mathematically represented as
[tex]\Delta f = |f_1 - f_2|[/tex]
Where [tex]f_2[/tex] is the frequency of the sound from the out of tune guitar
[tex]f_2 =f_1 \pm \Delta f[/tex]
substituting values
[tex]f_2 =f_1 + \Delta f[/tex]
[tex]f_2 = 5276.9 + 17.0[/tex]
[tex]f_2 = 5293.9 \ Hz[/tex]
The wavelength for this frequency is
[tex]\lambda_2 = \frac{343 }{5293.9}[/tex]
[tex]\lambda_2 = 0.0648 \ m[/tex]
[tex]\lambda_2 = 6.48 \ cm[/tex]
For the second value of the second frequency
[tex]f_2 = f_1 - \Delta f[/tex]
[tex]f_2 = 5276.9 -17[/tex]
[tex]f_2 = 5259.9 Hz[/tex]
The wavelength for this frequency is
[tex]\lambda _2 = \frac{343}{5259.9}[/tex]
[tex]\lambda _2 = 0.0652 \ m[/tex]
[tex]\lambda _2 = 6.52 \ cm[/tex]
This question involves the concepts of beat frequency and wavelength.
The possible wavelengths of the out-of-tune guitar are "6.48 cm" and "6.52 cm".
The beat frequency is given by the following formula:
[tex]f_b=|f_1-f_2|\\\\[/tex]
f₂ = [tex]f_b[/tex] ± f₁
where,
f₂ = frequency of the out-of-tune guitar = ?
[tex]f_b[/tex] = beat frequency = 17 Hz
f₁ = frequency of in-tune guitar = [tex]\frac{speed\ of\ sound\ in\ air}{\lambda_1}=\frac{343\ m/s}{0.065\ m}=5276.9\ Hz[/tex]
Therefore,
f₂ = 5276.9 Hz ± 17 HZ
f₂ = 5293.9 Hz (OR) 5259.9 Hz
Now, calculating the possible wavelengths:
[tex]\lambda_2=\frac{speed\ of\ sound}{f_2}\\\\\lambda_2 = \frac{343\ m/s}{5293.9\ Hz}\ (OR)\ \frac{343\ m/s}{5259.9\ Hz}\\\\[/tex]
λ₂ = 6.48 cm (OR) 6.52 cm
Learn more about beat frequency here:
https://brainly.com/question/10703578?referrer=searchResults
Light rays from stars bend toward smaller angles as they enter Earth's atmosphere. a. Explain why this happens using Snell's law and the speed of light. b. Where are the actual stars in relation to their apparent position as viewed from the Earth's surface?
Answer:
Following are the answer to this question:
Explanation:
In option (a):
The principle of Snells informs us that as light travels from the less dense medium to a denser layer, like water to air or a thinner layer of the air to the thicker ones, it bent to usual — an abstract feature that would be on the surface of all objects. Mostly, on the contrary, glow shifts from a denser with a less dense medium. This angle between both the usual and the light conditions rays is referred to as the refractive angle. Throughout in scenario, the light from its stars in the upper orbit, the surface area of both the Earth tends to increase because as light flows from the outer atmosphere towards the Earth, it defined above, to a lesser angle.In option (b):
Rays of light, that go directly down wouldn't bend, whilst also sun source which joins the upper orbit was reflected light from either a thicker distance and flex to the usual, following roughly the direction of the curve of the earth. Throughout the zenith specific position earlier in this thread, astronomical bodies appear throughout the right position while those close to a horizon seem to have been brightest than any of those close to the sky, and please find the attachment of the diagram.A Nearsighted Eye. A certain very nearsighted person cannot focus on anything farther than 36.0 cm from the eye. Consider the simplified model of the eye. In a simplified model of the human eye, the aqueous and vitreous humors and the lens all have a refractive index of 1.40, and all the refraction occurs at the cornea, whose vertex is 2.60 cm from the retina.
Required:
a. If the radius of curvature of the cornea is 0.65 cm when the eye is focusing on an object 36.0 cm from the cornea vertex and the indexes of refraction are as described before, what is the distance from the cornea vertex to the retina?
b. What does this tell you about the shape of the nearsighted eye?
1. This distance is greater than for the normal eye.
2. This distance is shorter than for the normal eye.
Answer:
a) The distance from the cornea vertex to the retina is 2.37 cm
b) This distance is shorter than for the normal eye.
Explanation:
a) Let refractive index of air,
n(air) = x = 1
Let refractive index of lens,
n(lens) = y = 1.4
Object distance, s = 36 cm
Radius of curvature, R = 0.65 cm
The distance from the cornea vertex to the retina is the image distance because image is formed in the retina.
Image distance, s' = ?
(x/s) + (y/s') = (y-x)/R
(1/36) + (1.4/s') = (1.4 - 1)/0.65
1.4/s' = 0.62 - 0.028
1.4/s' = 0.592
s' = 1.4/0.592
s' = 2.37 cm
Distance from the cornea vertex to the retina is 2.37 cm
(b) For a normal eye, the distance between the cornea vertex and the retina is 2.60 cm. Since 2.37 < 2.60, this distance is shorter than for normal eye.
13. Under what condition (if any) does a moving body experience no energy even though there
is a net force acting on it?
(2 marks)
Answer:
When the Net Forces are equal to 0
Explanation:
Momentum of a body can be defined as product of mass and velocity. It is in the same direction as in velocity. When the momentum of a body doesn't change, it is said to be conserved. If the momentum of a body is constant, the the net forces acting on a body becomes zero. When net forces acting on a body is zero, it means that no kinetic energy is being lost or gained, hence the kinetic energy is also conserved. If no energy is being gained or lost, it means that the body will experience no energy.
A 60.0-kg boy is surfing and catches a wave which gives him an initial speed of 1.60 m/s. He then drops through a height of 1.57 m, and ends with a speed of 8.50 m/s. How much nonconservative work was done on the boy
Answer:
Work = 1167.54 J
Explanation:
The amount of non-conservative work here can be given by the difference in kinetic energy and the potential energy. From Law of conservation of energy, we can write that:
Gain in K.E = Loss in P.E + Work
(0.5)(m)(Vf² - Vi²) - mgh = Work
where,
m = mass of boy = 60 kg
Vf = Final Speed = 8.5 m/s
Vi = Initial Speed = 1.6 m/s
g = 9.8 m/s²
h = height drop = 1.57 m
Therefore,
(0.5)(60 kg)[(8.5 m/s)² - (1.6 m/s)²] - (60 kg)(9.8 m/s²)(1.57 m) = Work
Work = 2090.7 J - 923.16 J
Work = 1167.54 J
The block on this incline weighs 100 kg and is connected by a cable and pulley to a weight of 10 kg. If the coefficient of friction between the block and incline is o.3, the block will:
Answer:
a. 94.54 N
b. 0.356 m/s^2
Explanation:
Given:-
- The mass of the inclined block, M = 100 kg
- The mass of the vertically hanging block, m = 10 kg
- The angle of inclination, θ = 20°
- The coefficient of friction of inclined surface, u = 0.3
Find:-
a) The magnitude of tension in the cable
b) The acceleration of the system
Solution:-
- We will first draw a free body diagram for both the blocks. The vertically hanging block of mass m = 10 kg tends to move "upward" when the system is released.
- The block experiences a tension force ( T ) in the upward direction due the attached cable. The tension in the cable is combated with the weight of the vertically hanging block.
- We will employ the use of Newton's second law of motion to express the dynamics of the vertically hanging block as follows:
[tex]T - m*g = m*a\\\\[/tex] ... Eq 1
Where,
a: The acceleration of the system
- Similarly, we will construct a free body diagram for the inclined block of mass M = 100 kg. The Tension ( T ) pulls onto the block; however, the weight of the block is greater and tends down the slope.
- As the block moves down the slope it experiences frictional force ( F ) that acts up the slope due to the contact force ( N ) between the block and the plane.
- We will employ the static equilibrium of the inclined block in the normal direction and we have:
[tex]N - M*g*cos ( Q )= 0\\\\N = M*g*cos ( Q )[/tex]
- The frictional force ( F ) is proportional to the contact force ( N ) as follows:
[tex]F = u*N\\\\F = u*M*g *cos ( Q )[/tex]
- Now we will apply the Newton's second law of motion parallel to the plane as follows:
[tex]M*g*sin(Q) - T - F = M*a\\\\M*g*sin(Q) - T -u*M*g*cos(Q) = M*a\\[/tex] .. Eq2
- Add the two equation, Eq 1 and Eq 2:
[tex]M*g*sin ( Q ) - u*M*g*cos ( Q ) - m*g = a* ( M + m )\\\\a = \frac{M*g*sin ( Q ) - u*M*g*cos ( Q ) - m*g}{M + m} \\\\a = \frac{100*9.81*sin ( 20 ) - 0.3*100*9.81*cos ( 20 ) - 10*9.81}{100 + 10}\\\\a = \frac{-39.12977}{110} = -0.35572 \frac{m}{s^2}[/tex]
- The inclined block moves up ( the acceleration is in the opposite direction than assumed ).
- Using equation 1, we determine the tension ( T ) in the cable as follows:
[tex]T = m* ( a + g )\\\\T = 10*( -0.35572 + 9.81 )\\\\T = 94.54 N[/tex]
Three masses are located in the x-y plane as follows: a mass of 6 kg is located at (0 m, 0 m), a mass of 4 kg is located at (3 m, 0 m), and a mass of 2 kg is located at (0 m, 3 m). Where is the center of mass of the system?
A. (1 m, 2 m)
B. (2 m, 1 m)
C. (1 m, 1 m)
D. (1 m, 0.5 m)
E. (0.5 m, 1 m)
D. (1m, 0.5m)
Explanation:
The center of mass (or center of gravity) of a system of particles is the point where the weight acts when the individual particles are replaced by a single particle of equivalent mass. For the three masses, the coordinates of the center of mass C(x, y) is given by;
x = (m₁x₁ + m₂x₂ + m₃x₃) / M ----------------(i)
y = (m₁y₁ + m₂y₂ + m₃y₃) / M ----------------(ii)
Where;
M = sum of the masses
m₁ and x₁ = mass and position of first mass in the x direction.
m₂ and x₂ = mass and position of second mass in the x direction.
m₃ and x₃ = mass and position of third mass in the x direction.
y₁ , y₂ and y₃ = positions of the first, second and third masses respectively in the y direction.
From the question;
m₁ = 6kg
m₂ = 4kg
m₃ = 2kg
x₁ = 0m
x₂ = 3m
x₃ = 0m
y₁ = 0m
y₂ = 0m
y₃ = 3m
M = m₁ + m₂ + m₃ = 6 + 4 + 2 = 12kg
Substitute these values into equations (i) and (ii) as follows;
x = ((6x0) + (4x3) + (2x0)) / 12
x = 12 / 12
x = 1 m
y = (6x0) + (4x0) + (2x3)) / 12
y = 6 / 12
y = 0.5m
Therefore, the center of mass of the system is at (1m, 0.5m)
In a device called the ballistic pendulum, a compressed spring is used to launch a steel ball horizontally into a soft target hanging from a string. The ball embeds in the target and the two swing together from the string. Describe the energy transfers and/or transformations that take place during the use of the ballistic pendulum and at what points they occur
Answer:
When the spring in the ballistic pendulum is compressed, energy is stored up in the spring as potential energy. When the steel ball is launched by the spring, the stored up potential energy of the compressed spring is transformed and transferred into the kinetic energy of the steel ball as it flies off to hit its target. On hitting the soft target, some of the kinetic energy of the steel ball is transferred to the soft target (since they stick together), and they both start to swing together. During the process of swinging, the system's energy is transformed between kinetic and potential energy. At the maximum displacement of the ball from its point of rest, all the energy is converted to potential energy of the system. At the lowest point of travel (at the rest point), all the energy of the system is transformed into kinetic energy. In between these two points, energy the energy of the system is a combination of both kinetic and potential energy.
In the end, all the energy will be transformed and lost as heat to the surrounding; due to the air resistance around; bringing the system to a halt.
Potential difference of a battery is 2.2 V when it is connected
across a resistance of 5 ohm, if suddenly the potential difference
falls to 1.8V, its internal resistance will be
Answer:
1.1ohms
Explanation:
According to ohms law E = IR
If potential difference of a battery is 2.2 V when it is connected across a resistance of 5 ohm and if suddenly the voltage Falls to 1.8V then the current in the 5ohms resistor I = V/R = 1.8/5
I = 0.36A (This will be the load current).
Before we can calculate the value of the internal resistance, we need to know the voltage drop across the internal resistance.
Voltage drop = 2.2V - 1.8V = 0.4V
Then we calculate the internal resistance using ohms law.
According to the law, V = Ir
V= voltage drop
I is the load current
r = internal resistance
0.4 = 0.36r
r = 0.4/0.36
r = 1.1 ohms
Two narrow slits, illuminated by light consisting of two distinct wavelengths, produce two overlapping colored interference patterns on a distant screen. The center of the eighth bright fringe in one pattern coincides with the center of the third bright fringe in the other pattern. What is the ratio of the two wavelengths?
Answer:
The ration of the two wavelength is [tex]\frac{\lambda_1}{\lambda_2} = \frac{8}{3}[/tex]
Explanation:
Generally two slit constructive interference can be mathematically represented as
[tex]\frac{y}{L} = \frac{m * \lambda}{d}[/tex]
Where y is the distance between fringe
d is the distance between the two slit
L is the distance between the slit and the wall
m is the order of the fringe
given that y , L , d are constant we have that
[tex]\frac{m }{\lambda } = constant[/tex]
So
[tex]\frac{m_1 }{\lambda_1 } = \frac{m_2 }{\lambda_2 }[/tex]
So [tex]m_1 = 8[/tex]
and [tex]m_2 = 3[/tex]
=> [tex]\frac{m_2}{m_1} = \frac{\lambda_1}{\lambda_2}[/tex]
=> [tex]\frac{8}{3} = \frac{\lambda_1}{\lambda_2}[/tex]
So
[tex]\frac{\lambda_1}{\lambda_2} = \frac{8}{3}[/tex]
A heavy, 6 m long uniform plank has a mass of 30 kg. It is positioned so that 4 m is supported on the deck of a ship and 2 m sticks out over the water. It is held in place only by its own weight. You have a mass of 70 kg and walk the plank past the edge of the ship. How far past the edge do you get before the plank starts to tip, in m
Answer:
about 1 meter
Explanation:
The distance past the edge that the man will get before the plank starts to tip is; 0.4285 m
We are given;
Mass of plank; m = 30 kg
Length of plank; L = 6m
Mass of man; M = 70 kg
Since the plank has 2 supports which are the deck of the ship, then it means that, we can take moments about the right support before the 2m stick out of the plank.
Thus;
Moment of weight of plank about the right support;
τ_p = mg((L/2) - 2)
τ_p = 30 × 9.8((6/2) - 2)
τ_p = 294 N.m
Moment of weight of man about the right support;
τ_m = Mgx
where x is the distance past the edge the man will get before the plank starts to tip.
τ_m = 70 × 9.8x
τ_m = 686x
Now, moment of the board is counterclockwise while that of the man is clockwise. Thus;
τ_m = τ_p
686x = 294
x = 294/686
x = 0.4285 m
Read more at; https://brainly.com/question/22150651
A charged particle q moves at constant velocity through a crossed electric and magnetic fields (E and B, which are both constant in magnitude and direction). Write the magnitude of the electric force on the particle in terms of the variables given. Do the same for the magnetic force
Answer:
The magnitude of the electric force on the particle in terms of the variables given is, F = qE
The magnitude of the magnetic force on the particle in terms of the variables given is, F = q (v x B)
Explanation:
Given;
a charged particle, q
magnitude of electric field, E
magnitude of magnetic field, B
The magnitude of the electric force on the particle in terms of the variables given;
F = qE
The magnitude of the magnetic force on the particle in terms of the variables given;
F = q (v x B)
where;
v is the constant velocity of the charged particle
Answer:
The magnitude of the electric force acting on a charged particle moving through an electric field = |qE|
The magnitude of the magnetic force of a charged particle moving at a particular velocity through a magnetic field = |qv × B|
Explanation:
The electric force acting on a charged particle, q, moving through an electric field, E, is given as a product of the charge on the particle (a scalar quantity) and the electric field (a vector quantity).
Electric force = qE
The magnitude of the electric force = |qE|
That is, magnitude of the product of the charge and the electric field vector.
The magnetic force acting on a charged particle, q, moving with a velocity, v, through a magnetic field, B is a vector product of qv [a product of the charge of the particle (a scalar quantity) and the velocity of the particle (a vector quantity)] and B (a vector quantity).
It is given mathematically as (qv × B)
The magnitude of the magnetic force is the magnitude of the vector product obtained.
Magnitude of the magnetic force = |qv × B|
Hope this Helps!!!
A 2.5 m long diving board weighs 120 N. It has two supports, one at the end and another at a distance of 1.0 m from that end. A 100 N diver stands at the other end of the board. What is the magnitude and direction of the force exerted by the support at the end of the diving board
Answer:
46.67 N Upwards (with a clockwise moment)
Explanation:
length of board = 2.5 m
weight of board = 120 N
the board has two supports, say support A and support B
support A is at one end,
support B is at 100 m from the other end.
weight of diver = 100 N
diver stands on the other end of the board.
Magnitude of support A at the end of the board
To get the magnitude and force exerted by the support at the end of the board (support A, we take moment of the forces about support B
Moment of a force is the product of force and perpendicular distance of the force about a center.
The weight of the board acts at the center of the board (1.25 m from each end of the board). That is 2.5 m from the support B.
moment of board's weight about support B is 120 x 0.25 = 30 N-m
The moment due to the weight of the board acts anticlockwise.
Weight of the diver acts at the opposite side of the board, and it acts 1 m from support B.
Moment of diver about support B is 100 x 1 = 100 N-m
Th moment due to the diver acts clockwise.
The moment due to the reaction at support A acts at a distance 1.5 m from support B
If the reaction force on support A is Fa, then the reaction about support B is Fa x 1.5 = 1.5Fa.
The moment due to support A acts clockwise.
According to moment laws, the total clockwise movement must be equal to the total anticlockwise movement.
Total clockwise movements = 100 N-m + 1.5Fa
Total anticlockwise moment = 30 N-m
according to moment laws,
100 + 1.5Fa = 30
1.5 Fa = 30 - 100 = -70
Fa = -70/1.5 = -46.67 N
The magnitude of the force exerted at support A is equal but opposite to the reaction at support A and is equal to 46.67 N
An air bubble underwater has the same pressure as that of the surrounding water. As the air bubble rises toward the surface (and its temperature remains constant), the volume of the air bubble.
a) increase or decrease, depending on the rate it rises.
b) decreases.
c) increases.
d) remains constant
Answer:
D Remains constant
Explanation:
Prof. Marcia Grail, supervillain and superscientist, wishes to spy on her foes (they'll all pay!) from orbit. She wishes to be able to resolve detail on order the size of the letters on a license plate (approx. 5cm), in a wavelength of approximately 550 nm, from an orbit approximately 4.2 x 10^7 m above the surface of the Earth. If her resolution is limited only by diffraction, then what is the smallest aperture telescope that she can get away with
Answer:
563.64 m
Explanation:
Given that as per the question
x = 5 cm = 0.05 m
D = 4.2 × 107 m
d = smallest aperture size
As per the situation the solution of the smallest aperture telescope that she can get away with is below :-
We will use Rayleigh's diffraction limit which is
[tex]d\frac{x}{D} = 1.22\lambda[/tex]
The equation will be
[tex]d\frac{0.05}{4.2\times 10^7} = 1.22[550\times 10^{-9}][/tex]
d = 563.64 m
So, the answer is d = 563.64 m
A hawk is flying horizontally at 18.0 m/s in a straight line, 230 m above the ground. A mouse it has been carrying struggles free from its grasp. The hawk continues on its path at the same speed for 2.00 s before attempting to retrieve its prey. To accomplish the retrieval, it dives in a straight line at constant speed and recaptures the mouse 3.00 m above the ground. (a) Assuming no air resistance, find the diving speed (magnitude of the total velocity vector) of the hawk. (b) What angle did the hawk make with the horizontal during its descent? (c) For how long did the mouse "enjoy" free fall?
Answer:
a) vd = 47.88 m/s
b) θ = 80.9°
c) t = 6.8 s
Explanation:
In the situation of the problem, you can assume that the trajectory of the hawk and the trajectory of the mouse form a rectangle triangle.
One side of the triangle is the horizontal trajectory of the hawk after 2.00s of flight, the other side of the triangle is the distance traveled by the mouse when it is falling down. And the hypotenuse is the trajectory of the hawk when it is trying to recover the mouse.
(a) In order to calculate the diving speed of the hawk, you first calculate the hypotenuse of the triangle.
One side of the triangle is c1 = (18.0m/s)(2.0s) = 36m
The other side of the triangle is c2 = 230m - 3m = 227 m
Then, the hypotenuse is:
[tex]h=\sqrt{(36m)^2+(227m)^2}=229.83m[/tex] (1)
Next, it is necessary to calculate the falling down time of the mouse, this can be done by using the following formula:
[tex]y=y_o+v_ot+\frac{1}{2}gt^2[/tex] (2)
yo: initial height = 230m
vo: initial vertical speed of the mouse = 0m/s
g: gravitational acceleration = -9.8m/s^2
y: final height of the mouse = 3 m
You replace the values of the parameters in (2) and solve for t:
[tex]3=230-4.9t^2\\\\t=\sqrt{\frac{227}{4.9}}=6.8s[/tex]
The hawk traveled during 2.00 second in the horizontal trajectory, hence, the hawk needed 6.8s - 2.0s = 4.8 s to travel the distance equivalent to the hypotenuse to catch the mouse.
You use the value of h and 4.8s to find the diving speed of the hawk:
[tex]v_d=\frac{229.83m}{4.8s}=47.88\frac{m}{s}[/tex]
The diving speed of the Hawk is 47.88m/s
(b) The angle is given by:
[tex]\theta=cos^{-1}(\frac{c_1}{h})=cos^{-1}(\frac{36m}{229.83m})=80.9 \°[/tex]
Then angle between the horizontal and the trajectory of the Hawk when it is descending is 80.9°
(c) The mouse is falling down during 6.8 s
Two metal spheres are hanging from nylon threads. When you bring the spheres close to each other, they tend to attract. Based on this information alone, discuss all the possible ways that the spheres could be charged. Is it possible that after the spheres touch, they will cling together? Explain.
Explanation:
In the given question, the two metal spheres were hanged with the nylon thread.
When these two spheres were brought close together, they attracted each other. The attraction between these spheres is the result of the opposite charges between them.
The possible ways by which these two metal spheres can be charged are by induction that is touching the metal or by rubbing them.
During induction, the same charges are transferred to each sphere. In this case, either both the spheres will be negatively charged or positively charged.
It is not possible that after the sphere touch each other they will cling together because the same charge repels each other and during touching, if one sphere is neutral, then the charged one will transfer the same charge. And as we know that same charge repel each other therefore they will repel each other.
A fox locates rodents under the snow by the slight sounds they make. The fox then leaps straight into the air and burrows its nose into the snow to catch its meal. If a fox jumps up to a height of 85 cm , calculate the speed at which the fox leaves the snow and the amount of time the fox is in the air. Ignore air resistance.
Answer:
v = 4.08m/s₂
Explanation: