Kinesiology is the study of:
Question 4 options:
Human movement
The study of bones.
The study of team sports.
answer is human movement
i hope this helps
Answer:
Human movement
Explanation:
Kinesiology is the study of the mechanics of body movements to provide information about the state of health of all body organs and systems.
What is the average velocity of atoms in 1.00 mol of neon (a monatomic gas) at 2°C? For m, use 0.0202 kg.
Answer:The average Velocity of the atoms =582.73m/s
Explanation:
Given
Mole of neon gas = 1.00 mol
Temperature = 2°C changing to Kelvin becomes
2°C + 273.15 = 275.15K
Mass = 0.0202 kg
Using the equation that connects the Average kinetic energy with ideal gas equation we have that
Kinetic energy=3/2 nRt
1/2(mv^2) = 3/2 nRt
Where
M = mass,
V = volume.
R = gas constant(8.31 jK-1 mol-1,
t = temperature in Kelvin,
n = number of moles
Putting our known values, we have that
1/2(0.0202 × v^2) = 3/2 (1 × 8.31 × 275.15)
0.0101 v^2 = 3,429.745
v^2 = 3429.745 / 0.0101
v^2 = 339,578.713
v = √339578.713
v = 582.73m/s
1 point
Which of the following collections of properties contain only features which can be changed by a resultant force?
The collections of properties which contain only features that can be changed by a resultant force is: speed, shape and direction.
A resultant force refers to a total effective force that has both magnitude and direction, which is mainly obtained through the addition of two (2) or more forces.
Hence, a resultant force is a single force acting on an object or physical body and it is obtained by combining two (2) or more forces.
Generally, there are some properties that changes when a resultant force is applied on them and these include:
Speed.Shape.Direction.Velocity.Read more: https://brainly.com/question/17742679
resistors - defibrillator - resistance - increases - energy - decreases -capacitors.
1_______________ is the difficulty of passing electric current through a conductor. It 2_______________ as the wire becomes longer and 3_________________ as the wire becomes wider.
4________________ are electric devices used to transform energy into heat or light.
5________________ are similar to batteries. They can store 6_______________. But they charge up quicker and can discharge the all the energy faster than a second. A 7_________________ is an example of a capacitor function.
Answer:
1. Resistance.
2. Decreases.
3. Increases.
4. Defibrillator.
5. Capacitors.
6. Energy.
7. Resistor.
Explanation:
Resistance is the difficulty of passing electric current through a conductor. It increases as the wire becomes longer and decreases as the wire becomes wider.
Defibrillator are electric devices used to transform energy into heat or light.
Capacitors are similar to batteries. They can store energy. But they charge up quicker and can discharge all the the energy faster than a second. A resistor is an example of a capacitor function.
Who is Isaac Newton?
Take the points, Im leaving Brainly..
Answer: English
. mathematician
. physicist
. astronomer
. theologian
. author
Explanation:
Take the points, Im leaving Brainly.. Why?!
[tex]\huge\bf\maltese{\underline{\red{Thanks}}}\maltese[/tex]
Question 7 of 10
Through which material will sound tend to travel fastest?
A. Ice
B. Steam
C. Liquid
D. Sound travels at the same speed in every material.
SUBMIT
HELP PLSSSSSSSSSS ASAP :)))))
Answer:
Explanation:
Pooh Shiesty, that's my dawg
But Pooh, you know I'm really shiesty
You told all them O.T. ni ggas that you really slide
Tell the truth about your gang, they really dyin'
I got my own fire, don't need security in the club
All that woofin' on the net , I thought you was a thug
They ain't got nowhere to go, I sh0t up everywhere they was
Yeah, you know who took that - from you
Come get it back in blood
Come get it back in blood
+
CaCl 2
+
_C2HCl3
C2H2C14
H 20
+
Ca(OH) 2 →
What is the smallest particle of an element that still retains of that element
A.compound
B.molecule
C.atom
D.mixture
Answer:
atom
Explanation:
the first guy who gave link this is for you:
we cannot use links in brainly
Thankyou.
a student is supplied with the following pieces of equipment:
• a small metal ball
• table tennis ball
• metre rule
• stop clock
• calculator
• light gate
• data logger
describe how the student can use this, or other additional equipment, to determine an accurate value for the acceleration of free fall (g). the student need not use all the equipment. show clearly what measurements should be taken and how the students should use these in determining (g). describe one source of error and how this might affect the value of (g).
(6 marks/year9/gcse)
Explanation:
Use a meter stick, small metal ball, stopwatch, calculator.
Have the students mark off a vetrtical distance from which to drop the metal ball. Ready the stopwatch, and start when the object is dropped and stop when the object contact the ground. Repeat 5 times and average the stopwatch times.
Now, use the formula d=vo+(1/2)at^2
There's no initial velocity, so d=(1/2)at^2
We know time and distance, so we can solve for a, acceleration.
2d=at^2
(2d)/(t^2)=a
Now, input the numbers gathered in the experiment in meters and seconds.
One source of error is human error (stopwatch timing)
Air resistance (although pretty negligible)
A car is traveling at 10 m/s. 10 seconds later the car is traveling 40 m/s. What is the car’s acceleration?
Answer:
a = 3 m/s^2
Explanation:
Vi = 10 m/s
Vf = 40 m/s
t = 10 s
Plug those values into the following equation:
Vf = Vi + at
40 = 10 + 10a
---> a = 3 m/s^2
The car is traveling with an initial velocity of 10 m/s, a final velocity of 40 m/s in the time period of 10 seconds, then the acceleration of the car is 3 m/s².
What is acceleration?Acceleration describes a change in an object's velocity. By accelerating, decelerating, or changing direction of motion, an object's velocity may change.
An apple falling to the ground, the moon orbiting the earth, and a car stopping at a set of traffic lights are a few examples of acceleration. With the aid of these illustrations, we may better see that acceleration occurs whenever a moving object modifies its direction, speed, or both.
The given values according to the question are,
Initial velocity, u = 10 m/s
Final velocity, v = 40 m/s and,
Time, t = 10 seconds.
Use the equation of motion to find the acceleration,
v = u + at
40 = 10 + (a)10
a = 30/10
a = 3 m/s².
Hence, the acceleration of the car is 3 m/s².
To get more information about Acceleration :
https://brainly.com/question/12550364
#SPJ2
What is happening in this image ?
Answer:
A mirror is scattering light.
An Led Light bulb is rated 14 W. How much energy will the light bulb consume if it is on for 1 hour (3600 seconds)
Answer:
18kW
Explanation:
very LED bulb has a power rating in terms of Watt-hour. It gives the power consumption per hour. For e.g. a 100W light bulb consumes 100W of electricity per hour. If left 'on' for 10 hours, a 100W light bulb costs 1kW and 1 unit of electricity is burned. Because 1 unit = 1 Kw of electricity.
I calculated my electricity consumption in 1 hour with LED Bulb as follows-
LED Bulbs power rating- 15 watt
quantity- 1
No. of hours a day – 12
Wattage in 1 hour – 12(time) x 15(load) x 1(quantity) = 180W = .18kW
So consumption units of power with a LED Bulb consume in 1 hour= .18 Units (because 1 KW = 1 unit)
caves are formed from?
Answer:
caves are mainly formed by water or in some other cases limestone.
Please help me please and you will get the brainlist
Answer:
4. Force = 178.6 Newton.
5. Acceleration = 2.28 m/s².
6. Force = 178.6 Newton.
Explanation:
4. Given the following data;
Acceleration = 3.8 m/s²
Mass = 47kg
Force = mass * acceleration
Force = 47 * 3.8
Force = 178.6 Newton.
5. Given the following data;
Force = 785N
Mass = 345kg
Acceleration = force/mass
Acceleration = 785/345
Acceleration = 2.28 m/s²
6. Given the following data;
Acceleration = 6m/s²
Force = 32N
Mass =force/acceleration
Mass = 32/6
Mass = 5.33 kilograms
Look at the diagram B. What is happening in diagram B ?
Answer:
a lens is scattering light
Explanation:
Diagram B shows a plano concave lens. Plano-Concave lenses bend parallel input rays to diverge from one another on the output side of the lens and hence have a negative focal length.
In the given figure, a Plano concave lens is shown. It scatters light. The image is formed in front of lens. The formed image is virtual.
Hence, the correct option is (c) "a lens is scattering light".
Circular orbit
What is the answer? You might have to click on the picture.
Choice-B is a relevant statement, although we can't see enough of the picture to actually know what's going on.
A good example of this scenario is our own moon. Because of the Sun's gravitational influence, the Moon's orbit around the Earth is not a circle or an ellipse.
3) Magnets are used to separate steel cans from aluminum cans in recycling plants. How can
they be used for this?
(Will give brainliest if it's a proper answer)
Answer:
Since steel contains iron (a magnetic metal), the magnets will attract the steel cans since aluminum is not magnetic. This is used to separate the steel cans from the aluminum cans so they can be recycled separately.
a car whose initial speed is 30 seconds m / s slows uniformly to a stop in 5.00 seconds what was the cars displacement
Answer:
60
Explanation:
A physics teacher is reheating her leftover pizza lunch in the very old teacher breakroom microwave. The microwave is so old that it doesn't even turn the food as it cooks. When the teacher takes her food out and eats it, she discovers that parts of the pizza are scalding hot, while other parts are still very cold. She explains to the students that a microwave works by producing standing waves that result in heating. She asks the students to explain why some parts of the pizza are hot while others are still cold. Below are their responses:
Answer: At the antinodes of a standing wave, the wave is shaking very rapidly, causing those parts of the pizza to get hot. At the nodes, the wave is not shaking much at all, causing those parts of the pizza to stay cold."
Explanation:
antinodes vibrate and are the opposite of nodes which are stationary.
Some parts of the pizza are hot while others are still cold. Because the antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear.
What are the differences between nodes and antinodes?The fact that there are locations along the medium that appear to be standing still is a feature of every standing wave pattern.
The term "node" refers to these sites, which are also known as "points of no displacement." Other sites along the medium are subjected to vibrations with substantial positive and negative displacements.
During each vibrational cycle of the standing wave, these are the locations that experience the most displacement. These points are termed "antinodes" because they are the polar opposites of nodes.
The antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear. The wave isn't moving very much at the nodes, therefore those areas of the pizza stay cold."
Hence some parts of the pizza are hot while others are still cold.
To learn more about antinodes refer to the link;
https://brainly.com/question/2608876
What is the unit for resistance?
A. Ohms
B. Watts
C. Volts
D. Amperes
Answer:
The unit for resistance is ohms(Ω).
A. Ohms
Hope it will help :)
identify global climate zones and characteristics of each
research the different time zone around the world, and characteristics of each
The increasing speed of a falling object is caused by
gravity
force
mass
speed
(pick one)
Answer:
gravity
Explanation:
Technically it would be mass or speed because it depends on ow big or small it is, but if you break it down it will be due to gravity as it gets stronger
If my angular velocity slows from 30 Hz to 20 Hz in 72°, what is my deceleration?
Answer:
The deceleration is -7.85x10³ rad/s².
Explanation:
The angular speed (ω) is related to frequency (f) as follows:
[tex] \omega = 2\pi f [/tex]
When the frequency is 30 Hz the angular speed is:
[tex] \omega_{i} = 2\pi f = 2\pi*30 Hz = 188.5 rad/s [/tex]
Now, when the frequency is 20 Hz the angular speed is:
[tex] \omega_{f} = 2\pi*20 Hz = 125.7 rad/s [/tex]
Finally, the angular acceleration (α) can be found using the following equation:
[tex] \omega_{f}^{2} = \omega_{i}^{2} + 2\theta \alpha [/tex]
Where:
θ: is the angular displacement = 72°
[tex] \alpha = \frac{\omega_{f}^{2} - \omega_{i}^{2}}{2\theta} [/tex]
[tex] \alpha = \frac{(125.7 rad/s)^{2} - (188.5 rad/s)^{2}}{2*72*\frac{2\pi rad}{360}} = -7.85 \cdot 10^{3} rad/s^{2} [/tex]
Therefore, the deceleration is -7.85x10³ rad/s².
I hope it helps you!
What is the chemical name of SiF4? sulfur fluoride silicon fluoride sulfur tetrafluoride silicon tetrafluoride
Answer:
Silicon tetrafluoride
Explanation:
The symbol Si represents the element silicon, as shown in the periodic table.
The are 4 fluorines, so the prefix for fluoride must have tetra-
What increase in temperature is needed to increase the length of an aluminum meterstick by 1.0 mm?
42 K
24K
Answer:
42k
Explanation:
The increase in temperature is needed to increase the length of an aluminum meter-stick by 1.0 mm is 42 K. The option 1 is the correct option.
What is thermal expansion?Thermal expansion is the property of the matter to change its shape, size, length, volume, density etc with change in the temperature.
The thermal expansion can be calculate as,
[tex]\Delta L=aL\Delta T[/tex]
Here, [tex]L[/tex] is the original length, [tex]\Delta T[/tex] is the change in the temperature and [tex]a[/tex] is the coefficient of the expansion.
Given information-
The change in the length of the aluminum mater-stick is 1.00 mm.
Let the initial size of the aluminium mater-stick is 1.00 m or 1000 mm . The thermal expansion coefficient of aluminium is [tex](2.4\times10^{-5})[/tex] per unit Kelvin.
Put the values in the above formula as,
[tex]1=(2.4\times10^{-5})\times 1000\times\Delta T[/tex]
Solve for temperature as,
[tex]\Delta T=\dfrac{1}{(2.4\times10^{-5})\times 1000} \\\Delta T=42K[/tex]
Hence the increase in temperature is needed to increase the length of an aluminum meter-stick by 1.0 mm is 42 K. The option 1 is the correct option.
Learn more about the thermal expansion here;
https://brainly.com/question/1166774
How to calculate the period of a wave?
Answer:
The wave velocity and the wavelength are related to the wave's frequency and period by vw=λT or vw=fλ. The time for one complete wave cycle is the period T. The number of waves per unit time is the frequency ƒ. The wave frequency and the period are inversely related to one another.
Explanation:
T = 1 / f is the formula to calculate the period of a wave.
What is the period of the wave?The time it takes for two successive crests (one wavelength) to pass a specified point. The wave period is often referenced in seconds.
The calculation of period of wave is:
The formula for period is T = 1 / f ,
where "T" is period – the time it takes for one cycle to complete, and "f" is frequency.
To get period from frequency, first convert frequency from Hertz to 1/s.
Period refers to the time for something to happen and is measured in seconds/cycle.
In this case, there are 11 seconds per 33 vibrational cycles.
Thus the period is (11 s) / (33 cycles) = 0.33 seconds.
Therefore,
T = 1 / f is the formula to calculate the period of a wave.
Learn more about period of the wave here:
https://brainly.com/question/14588679
#SPJ2
Plssssss help me no one wants to help me——— power plants use generators to generate electricity for homes and businesses. Some generators work by spinning a coil of wire inside a magnet, as shown in the image. To keep the coil of wire spinning, it’s often attached to a turbine, which is s as n axle with fan blades. Different kinds of power plants use different methods to spin the turbine to make electricity. What’s one way a power plant might spin the turbine?
Answer:
There are a many ways to produce electricity. Electrons can flow between certain different materials providing a current, as in a common battery. While reliable and portable, chemical batteries run down quickly. To provide the large amounts of steady power demanded by modern societies, large power plants have been built. Most power plants make electricity with a machine called a generator.
A 1925 Turbine Rotor
A 1925 turbine rotor for a Westinghouse generator, Image #21.035, Science Service Historical Image Collection, National Museum of American History
Generators have two important parts: the rotor (which rotates) and the stator (which remains stationary). Generators use the principle of electro-magnetic induction, which exploits the relation between magnetism and electricity. In large AC generators, an outer shell with powerful magnets rotates around a stationary "armature" which is wound with heavy wire. As they move, the magnets induce an electric current in the wire.
It is important to recognize that electricity is not mined or harvested, it must be manufactured. And since it's not easily stored in quantity, it must be manufactured at time of demand. Electricity is a form of energy, but not an energy source. Different generating plants harness different energy sources to make electric power. The two most common types are "Thermal Plants" and "Kinetic Plants".
What will happen if you heat a liquid to high temperatures?
Group of answer choices
A. The molecules slow down and gain more energy
B. The molecules speed up and contain less energy
C. The molecules start to slow down and contain less energy
D.The molecules speed up and gain more energy
... I don’t understand H E L P