Answer:
[tex]F(t)=m\,\,a(t)=6\,m\,t\,\hat i+14\,m\,\hat j+6\,m\,t\,\hat k\\F(t)=\,(6\,m\,t,14\,m,6\,m\,t)[/tex]
Explanation:
Recall that force is defined as mass times acceleration, and acceleration is the second derivative with respect to time of the position. Since the position comes in terms of time, and with separate functions for each component in the three dimensional space, we first calculate the velocity (with the first derivative, and then the acceleration as the second derivative:
[tex]r(t)=t^3\,\hat i+7\,t^2\,\hat j+t^3\,\hat k\\v(t)=3\,t^2\,\hat i+14\,t\,\hat j+3\,t^2\,\hat k\\a(t)=6\,t\,\hat i+14\,\hat j+6\,t\,\hat k[/tex]
Therefore, the force will be given by the product of this acceleration times the mass "m":
[tex]F(t)=m\,\,a(t)=6\,m\,t\,\hat i+14\,m\,\hat j+6\,m\,t\,\hat k[/tex]
Muons are elementary particles that are formed high in the atmosphere by the interactions of cosmic rays with atomic nuclei. Muons are radioactive and have average lifetimes of about two-millionths of a second. Even though they travel at almost the speed of light, they have so far to travel through the atmosphere that very few should be detected at sea level - at least according to classical physics. Laboratory measurements, however, show that muons in great number do reach the earth's surface. What is the explanation?
Answer:
Muons reach the earth in great amount due to the relativistic time dilation from an earthly frame of reference.
Explanation:
Muons travel at exceedingly high speed; close to the speed of light. At this speed, relativistic effect starts to take effect. The effect of this is that, when viewed from an earthly reference frame, their short half life of about two-millionth of a second is dilated. The dilated time, due to relativistic effects on time for travelling at speed close to the speed of light, gives the muons an extended relative travel time before their complete decay. So in reality, the muon do not have enough half-life to survive the distance from their point of production high up in the atmosphere to sea level, but relativistic effect due to their near-light speed, dilates their half-life; enough for them to be found in sufficient amount at sea level.
The Law of Biot-Savart shows that the magnetic field of an infinitesimal current element decreases as 1/r2. Is there anyway you could put together a complete circuit (any closed path of current-carrying wire) whose field exhibits this same 1/r^2 decrease in magnetic field strength? Explain your reasoning.
Answer and Explanation:
There is no probability of obtaining such a circuit of closed track current carrying wire whose field of magnitude displays i.e. [tex]B \alpha \frac{1}{r^2}[/tex]
The magnetic field is a volume of vectors
And [tex]\phi\ bds = 0[/tex]. This ensures isolated magnetic poles or magnetic charges would not exit
Therefore for a closed path, we never received magnetic field that followed the [tex]B \alpha \frac{1}{r^2}[/tex] it is only for the simple current-carrying wire for both finite or infinite length.
A 10 gauge copper wire carries a current of 23 A. Assuming one free electron per copper atom, calculate the magnitude of the drift velocity of the electrons.
Question:
A 10 gauge copper wire carries a current of 15 A. Assuming one free electron per copper atom, calculate the drift velocity of the electrons. (The cross-sectional area of a 10-gauge wire is 5.261 mm².)
Answer:
3.22 x 10⁻⁴ m/s
Explanation:
The drift velocity (v) of the electrons in a wire (copper wire in this case) carrying current (I) is given by;
v = [tex]\frac{I}{nqA}[/tex]
Where;
n = number of free electrons per cubic meter
q = electron charge
A = cross-sectional area of the wire
First let's calculate the number of free electrons per cubic meter (n)
Known constants:
density of copper, ρ = 8.95 x 10³kg/m³
molar mass of copper, M = 63.5 x 10⁻³kg/mol
Avogadro's number, Nₐ = 6.02 x 10²³ particles/mol
But;
The number of copper atoms, N, per cubic meter is given by;
N = (Nₐ x ρ / M) -------------(ii)
Substitute the values of Nₐ, ρ and M into equation (ii) as follows;
N = (6.02 x 10²³ x 8.95 x 10³) / 63.5 x 10⁻³
N = 8.49 x 10²⁸ atom/m³
Since there is one free electron per copper atom, the number of free electrons per cubic meter is simply;
n = 8.49 x 10²⁸ electrons/m³
Now let's calculate the drift electron
Known values from question:
A = 5.261 mm² = 5.261 x 10⁻⁶m²
I = 23A
q = 1.6 x 10⁻¹⁹C
Substitute these values into equation (i) as follows;
v = [tex]\frac{I}{nqA}[/tex]
v = [tex]\frac{23}{8.49*10^{28} * 1.6 *10^{-19} * 5.261*10^{-6}}[/tex]
v = 3.22 x 10⁻⁴ m/s
Therefore, the drift electron is 3.22 x 10⁻⁴ m/s
A solid conducting sphere is placed in an external uniform electric field. With regard to the electric field on the sphere's interior, which statement is correct
Complete question:
A solid conducting sphere is placed in an external uniform electric field. With regard to the electric field on the sphere's interior, which statement is correct?
A. the interior field points in a direction parallel to the exterior field
B. There is no electric field on the interior of the conducting sphere.
C. The interior field points in a direction perpendicular to the exterior field.
D. the interior field points in a direction opposite to the exterior field.
Answer:
B. There is no electric field on the interior of the conducting sphere.
Explanation:
Conductors are said to have free charges that move around easily. When the conductor is now placed in a static electric field, the free charges react to attain electrostatic equilibrium (steady state).
Here, a solid conducting sphere is placed in an external uniform electric field. Until the lines of the electric field are perpendicular to the surface, the free charges will move around the spherical conductor, causing polarization. There would be no electric field in the interior of the spherical conductor because there would be movement of free charges in the spherical conductor in response to any field until its neutralization.
Option B is correct.
There is no electric field on the interior of the conducting sphere.
Newton’s first law says that if motion changes, then a force is exerted. Describe a collision in terms of the forces exerted on both objects.
Answer:
In collision between equal-mass objects, each object experiences the same acceleration, because of equal force exerted on both objects.
Explanation:
In a collision two objects, there is a force exerted on both objects that causes an acceleration of both objects. These forces that act on both objects are equal in magnitude and opposite in direction.
Thus, in collision between equal-mass objects, each object experiences the same acceleration, because of equal force exerted on both objects.
If, the limits of the visible spectrum are approximately 3000 A.U. and 5000 A.U. respectively. Determine the angular breadth of the first order visible spectrum produced by a plane diffraction grating having 12000 lines per inch when light is incident normally on the grating.
Answer:
θ₁ = 0.04º , θ₂ = 0.00118º
Explanation:
The equation that describes the diffraction pattern of a network is
d sin θ = m λ
where the diffraction order is, in this case they indicate that the order
m = 1
θ = sin⁻¹ (λ / d)
Trfuvsmod ls inrsd fr ll red s SI units
d = 12000 line / inc (1 inc / 2.54cm) = 4724 line / cm
the distance between two lines we can look for it with a direct proportions rule
If there are 4724 lines in a centimeter, the distance for two hundred is
d = 2 lines (1 cm / 4724 line) = 4.2337 10⁻⁴ cm
let's calculate the angles
λ = 300 10-9 m
θ₁ = sin⁻¹ (300 10-9 / 4,2337 10-4)
θ₁ = sin⁻¹ (7.08 10-4)
θ₁ = 0.04º
λ = 5000
θ₂ = sin-1 (500 10-9 / 4,2337 10-4)
θ₂ = 0.00118º
Use Coulomb’s law to derive the dimension for the permittivity of free space.
Answer:
Coulomb's law is:
[tex]F = \frac{1}{4*pi*e0} *(q1*q2)/r^2[/tex]
First, force has units of Newtons, the charges have units of Coulombs, and r, the distance, has units of meters, then, working only with the units we have:
N = (1/{e0})*C^2/m^2
then we have:
{e0} = C^2/(m^2*N)
And we know that N = kg*m/s^2
then the dimensions of e0 are:
{e0} = C^2*s^2/(m^3)
(current square per time square over cubed distance)
And knowing that a Faraday is:
F = C^2*S^2/m^2
The units of e0 are:
{e0} = F/m.
When a particular wire is vibrating with a frequency of 6.3 Hz, a transverse wave of wavelength 53.3 cm is produced. Determine the speed of wave pulses along the wire.
Answer:
335.79cm/s
Explanation:
When a transverse wave of wavelength λ is produced during the vibration of a wire, the frequency(f), and the speed(v) of the wave pulses are related to the wavelength as follows;
v = fλ ------------------(ii)
From the question;
f = 6.3Hz
λ = 53.3cm
Substitute these values into equation (i) as follows;
v = 6.3 x 53.3
v = 335.79cm/s
Therefore, the speed of the wave pulses along the wire is 335.79cm/s
Two spaceships are observed from earth to be approaching each other along a straight line. Ship A moves at 0.40c relative to the earth observer, while ship B moves at 0.60c relative to the same observer. What speed does the captain of ship A report for the speed of ship B
Answer:
0.80 c
Explanation:
The computation of speed is shown below:-
Here, The speed of the captain ship A report for speed of the ship B which is
[tex]S = \frac{S_A + S_B}{1 + \frac{(S_AS_B)}{c^2} }[/tex]
where
[tex]S_A[/tex] indicates the speed of the ship A
[tex]S_B[/tex] indicates the speed of the ship B
and
C indicates the velocity of life
now we will Substitute 0.40c for A and 0.60 for B in the equation which is
[tex]S = \frac{0.40c + 0.60c}{1 + \frac{(0.40c)(0.60c)}{c^2} }[/tex]
after solving the above equation we will get
0.80 c
So, The correct answer is 0.80c
At t = 0, a battery is connected to a series arrangement of a resistor and an inductor. If the inductive time constant is 36.0 ms, at what time is the rate at which energy is dissipated in the resistor equal to the rate at which energy is stored in the inductor's magnetic field?
Answer:
The rate at which energy is dissipated in the resistor is equal to the rate at which energy is stored in the inductor's magnetic field in 24.95 ms.
Explanation:
The energy stored in the inductor is given as
E₁ = ½LI²
The rate at which energy is stored in the inductor is
(dE₁/dt) = (d/dt) (½LI²)
Since L is a constant
(dE₁/dt) = ½L × 2I (dI/dt) = LI (dI/dt)
(dE₁/dt) = LI (dI/dt)
Rate of Energy dissipated in a resistor = Power = I²R
(dE₂/dt) = I²R
When the rate at which energy is dissipated in the resistor equal to the rate at which energy is stored in the inductor's magnetic field
(dE₁/dt) = (dE₂/dt)
OK (dI/dt) = I²R
L (dI/dt) = IR
Current in a this kind of series setup of inductor and resistor at any time, t, is given as
I = (V/R) (1 - e⁻ᵏᵗ)
k = (1/time constant) = (R/L)
(dI/dt) = (kV/R) e⁻ᵏᵗ = (RV/RL) e⁻ᵏᵗ = (V/L) e⁻ᵏᵗ
L (dI/dt) = IR
L [(V/L) e⁻ᵏᵗ] = R [(V/R) (1 - e⁻ᵏᵗ)
V e⁻ᵏᵗ = V (1 - e⁻ᵏᵗ)
e⁻ᵏᵗ = 1 - e⁻ᵏᵗ
2 e⁻ᵏᵗ = 1
e⁻ᵏᵗ = (1/2) = 0.5
e⁻ᵏᵗ = 0.5
In e⁻ᵏᵗ = In 0.5 = -0.69315
- kt = -0.69315
kt = 0.69315
k = (1/time constant)
Time constant = 36.0 ms = 0.036 s
k = (1/0.036) = 27.78
27.78t = 0.69315
t = (0.69315/27.78) = 0.02495 = 24.95 ms
Hope this Helps!!!
If, instead, the ball is revolved so that its speed is 3.7 m/s, what angle does the cord make with the vertical?
Complete Question:
A 0.50-kg ball that is tied to the end of a 1.5-m light cord is revolved in a horizontal plane, with the cord making a 30° angle with the vertical.
(a) Determine the ball’s speed. (b) If, instead, the ball is revolved so that its
speed is 3.7 m/s, what angle does the cord make with the vertical?
(Check attached image for the diagram.)
Answer:
(a) The ball’s speed, v = 2.06 m/s
(b) The angle the cord makes with the vertical is 50.40⁰
Explanation:
If the ball is revolved in a horizontal plane, it will form a circular trajectory,
the radius of the circle, R = Lsinθ
where;
L is length of the string
The force acting on the ball is given as;
F = mgtanθ
This above is also equal to centripetal force;
[tex]mgTan \theta = \frac{mv^2}{R} \\\\Recall, R = Lsin \theta\\\\mgTan \theta = \frac{mv^2}{Lsin \theta}\\\\v^2 = glTan \theta sin \theta\\\\v = \sqrt{glTan \theta sin \theta} \\\\v = \sqrt{(9.8)(1.5)(Tan30)(sin30)} \\\\v = 2.06 \ m/s[/tex]
(b) when the speed is 3.7 m/s
[tex]v = \sqrt{glTan \theta sin \theta} \ \ \ ;square \ both \ sides\\\\v^2 = glTan \theta sin \theta\\\\v^2 = gl(\frac{sin \theta}{cos \theta}) sin \theta\\\\v^2 = \frac{gl*sin^2 \theta}{cos \theta} \\\\v^2 = \frac{gl*(1- cos^2 \theta)}{cos \theta}\\\\gl*(1- cos^2 \theta) = v^2cos \theta\\\\(9.8*1.5)(1- cos^2 \theta) = (3.7^2)cos \theta\\\\14.7 - 14.7cos^2 \theta = 13.69cos \theta\\\\14.7cos^2 \theta + 13.69cos \theta - 14.7 = 0 \ \ \ ; this \ is \ quadratic \ equation\\\\[/tex]
[tex]Cos\theta = \frac{13.69\sqrt{13.69^2 -(-4*14.7*14.7)} }{14.7} \\\\Cos \theta = 0.6374\\\\\theta = Cos^{-1}(0.6374)\\\\\theta = 50.40 ^o[/tex]
Therefore, the angle the cord makes with the vertical is 50.40⁰
A ball is thrown directly downward with an initial speed of 7.95 m/s, from a height of 29.0 m. After what time interval does it strike the ground?
Answer: after 1.75 seconds
Explanation:
The only force acting on the ball is the gravitational force, so the acceleration will be:
a = -9.8 m/s^2
the velocity can be obtained by integrating over time:
v = -9.8m/s^2*t + v0
where v0 is the initial velocity; v0 = -7.95 m/s.
v = -9.8m/s^2*t - 7.95 m/s.
For the position we integrate again:
p = -4.9m/s^2*t^2 - 7.95 m/s*t + p0
where p0 is the initial position: p0 = 29m
p = -4.9m/s^2*t^2 - 7.95 m/s*t + 29m
Now we want to find the time such that the position is equal to zero:
0 = -4.9m/s^2*t^2 - 7.95 m/s*t + 29m
Then we solve the Bhaskara's equation:
[tex]t = \frac{7.95 +- \sqrt{7.95^2 +4*4.9*29} }{-2*4.9} = \frac{7.95 +- 25.1}{9.8}[/tex]
Then the solutions are:
t = (7.95 + 25.1)/(-9.8) = -3.37s
t = (7.95 - 25.1)/(-9.8) = 1.75s
We need the positive time, then the correct answer is 1.75s
11. A seesaw sits in static equilibrium. A child with a mass of 30 kg sits 1 m away from a pivot point. Another child sits 0.75 m away from the pivot point on the opposite side. The second child's mass is _____ kg.
Answer:
40 kgExplanation:
Find the diagram relating to the question for proper explanation of the question below.
Using the principle of moment
Sum of clockwise moments = Sum of anticlockwise moments
Moment = Force * perpendicular distance
For anti-clockwise moment:
Since the 30 kg moves in the anticlockwise direction according to the diagram
ACW moment = 30 * 1 = 30 kgm
For clockwise moment
If another child sits 0.75 m away from the pivot point on the opposite side, moment of the child in clockwise direction = M * 0.75 = 0.75M (M is the mass of the unknown child).
Equating both moments we have;
0.75M = 30
M = 30/0.75
M = 40 kg
The second child's mass is 40 kg
A dipole moment is placed in a uniform electric field oriented along an unknown direction. The maximum torque applied to the dipole is equal to 0.1 N.m. When the dipole reaches equilibrium its potential energy is equal to -0.2 J. What was the initial angle between the direction of the dipole moment and the direction of the electric field?
Answer:
θ = 180
Explanation:
When an electric dipole is placed in an electric field, there is a torque due to the electric force
τ = p x E
by rotating the dipole there is a change in potential energy
ΔU = ∫ τ dθ
ΔU = p E (cos θ₂ - cos θ₁)
when the dipole starts from an angle to the equilibrium position for θ = 0
ΔU = pE (cos θ - cos 0)
cos θ = 1 + DU / pE)
let's apply this expression to our case, the change in potential energy is ΔU = -0.2J
let's calculate
cos θ = 1 -0.2 / 0.1
cos θ = -1
θ = 180
A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.00 s
Answer:
389 kg
Explanation:
The computation of mass is shown below:-
[tex]T = 2\pi \sqrt{\frac{m}{k} }[/tex]
Where K indicates spring constant
m indicates mass
For the new time period
[tex]T^' = 2\pi \sqrt{\frac{m'}{k} }[/tex]
Now, we will take 2 ratios of the time period
[tex]\frac{T}{T'} = \sqrt{\frac{m}{m'} }[/tex]
[tex]\frac{1.50}{2.00} = \sqrt{\frac{0.500}{m'} }[/tex]
[tex]0.5625 = \sqrt{\frac{0.500}{m'} }[/tex]
[tex]m' = \frac{0.500}{0.5625}[/tex]
= 0.889 kg
Since mass to be sum that is
= 0.889 - 0.500
0.389 kg
or
= 389 kg
Therefore for computing the mass we simply applied the above formula.
The mass added to the object to change the period to 2.00 s is 0.389 kg and this can be determined by using the formula of the time period.
Given :
A 0.500-kg mass suspended from a spring oscillates with a period of 1.50 s.
The formula of the time period is given by:
[tex]\rm T = 2\pi\sqrt{\dfrac{m}{K}}[/tex] ---- (1)
where m is the mass and K is the spring constant.
The new time period is given by:
[tex]\rm T'=2\pi\sqrt{\dfrac{m'}{K}}[/tex] ---- (2)
where m' is the total mass after the addition and K is the spring constant.
Now, divide equation (1) by equation (2).
[tex]\rm \dfrac{T}{T'}=\sqrt{\dfrac{m}{m'}}[/tex]
Now, substitute the known terms in the above expression.
[tex]\rm \dfrac{1.50}{2}=\sqrt{\dfrac{0.5}{m'}}[/tex]
Simplify the above expression in order to determine the value of m'.
[tex]\rm m'=\dfrac{0.5}{0.5625}[/tex]
m' = 0.889 Kg
Now, the mass added to the object to change the period to 2.00 s is given by:
m" = 0.889 - 0.500
m" = 0.389 Kg
For more information, refer to the link given below:
https://brainly.com/question/2144584
Two objects attract each other with a gravitational force of magnitude 1.02 10-8 N when separated by 19.7 cm. If the total mass of the two objects is 5.14 kg, what is the mass of each
Answer:
The two masses are 3.39 Kg and 1.75 Kg
Explanation:
The gravitational force of attraction between two bodies is given by the formula;
F = Gm₁m₂/d²
where G is the gravitational force constant = 6.67 * 10⁻¹¹ Nm²Kg⁻²
m₁ = mass of first object; m₂ = mass of second object; d = distance of separation between the objects
Further calculations are provided in the attachment below
A 1.0-kg ball is attached to the end of a 2.5-m string to form a pendulum. This pendulum is released from rest with the string horizontal. At the lowest point in its swing when it is moving horizontally, the ball collides elastically with a 2.0-kg block initially at rest on a horizontal frictionless surface. What is the speed of the block just after the collision
Answer:
[tex]v_{2}=3.5 m/s[/tex]
Explanation:
Using the conservation of energy we have:
[tex]\frac{1}{2}mv^{2}=mgh[/tex]
Let's solve it for v:
[tex]v=\sqrt{2gh}[/tex]
So the speed at the lowest point is [tex]v=7 m/s[/tex]
Now, using the conservation of momentum we have:
[tex]m_{1}v_{1}=m_{2}v_{2}[/tex]
[tex]v_{2}=\frac{1*7}{2}[/tex]
Therefore the speed of the block after the collision is [tex]v_{2}=3.5 m/s[/tex]
I hope it helps you!
can I get help please?
An isolated capacitor with capacitance C = 1 µF has a charge Q = 45 µC on its plates.a) What is the energy stored in the capacitor?Now a conductor is inserted into the capacitor. The thickness of the conductor is 1/3 the distance between the plates of the capacitor and is centered inbetween the plates of the capacitor.b) What is the charge on the plates of the capacitor?c) What is the capacitance of the capacitor with the conductor in place?d) What is the energy stored in the capacitor with the conductor in place?
Answer:
a) Energy stored in the capacitor, [tex]E = 1.0125 *10^{-3} J[/tex]
b) Q = 45 µC
c) C' = 1.5 μF
d) [tex]E = 6.75 *10^{-4} J[/tex]
Explanation:
Capacitance, C = 1 µF
Charge on the plates, Q = 45 µC
a) Energy stored in the capacitor is given by the formula:
[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{2}\\\\E = 1012.5 *10^{-6}\\\\E = 1.0125 *10^{-3} J[/tex]
b) The charge on the plates of the capacitor will not change
It will still remains, Q = 45 µC
c) Electric field is non zero over (1-1/3) = 2/3 of d
From the relation V = Ed,
The voltage has changed by a factor of 2/3
Since the capacitance is given as C = Q/V
The new capacitance with the conductor in place, C' = (3/2) C
C' = (3/2) * 1μF
C' = 1.5 μF
d) Energy stored in the capacitor with the conductor in place
[tex]E = \frac{Q^2}{2C} \\\\E = \frac{(45 * 10^{-6})^2}{2* 1.5* 10^{-6}}\\\\E = \frac{2025 * 10^{-6}}{3}\\\\E = 675 *10^{-6}\\\\E = 6.75 *10^{-4} J[/tex]
Two carts are connected by a loaded spring on a horizontal, frictionless surface. The spring is released and the carts push away from each other. Cart 1 has mass M and Cart 2 has mass M/3.
a) Is the momentum of Cart 1 conserved?
Yes
No
It depends on M
b) Is the momentum of Cart 2 conserved?
Yes
No
It depends on M
c) Is the total momentum of Carts 1 and 2 conserved?
Yes
No
It depends on M
d) Which cart ends up moving faster?
Cart 1
Cart 2
They move at the same speed
e) If M = 6 kg and Cart 1 moves with a speed of 16 m/s, what is the speed of Cart 2?
0 m/s
4.0 m/s
5.3 m/s
16 m/s
48 m/s
64 m/s
Answer:
a) yes
b) no
c) yes
d)Cart 2 with mass [tex]\frac{M}{3}[/tex] is expected to be more faster
e) u₂ = 48 m/s
Explanation:
a) the all out linear momentum of an arrangement of particles of Cart 1 not followed up on by external forces is constant.
b) the linear momentum of Cart 2 will be acted upon by external force by Cart 1 with mass M, thereby it's variable and the momentum is not conserved
c) yes, the momentum is conserved because no external force acted upon it and both Carts share the same velocity after the reaction
note: m₁u₁ + m₂u₂ = (m₁ + m₂)v
d) Cart 2 with mass [tex]\frac{M}{3}[/tex] will be faster than Cart 1 because Cart 2 is three times lighter than Cart 1.
e) Given
m₁= M
u₁ = 16m/s
m₂ =[tex]\frac{M}{3}[/tex]
u₂ = ?
from law of conservation of momentum
m₁u₁= m₂u₂
M× 16 = [tex]\frac{M}{3}[/tex] × u₂(multiply both sides by 3)
therefore, u₂ = [tex]\frac{3(M .16)}{M}[/tex] ("." means multiplication)
∴u₂ = 3×16 = 48 m/s
A "laser cannon" of a spacecraft has a beam of cross-sectional area A. The maximum electric field in the beam is 2E. The beam is aimed at an asteroid that is initially moving in the direction of the spacecraft. What is the acceleration of the asteroid relative to the spacecraft if the laser beam strikes the asteroid perpendicularly to its surface, and the surface is not reflecting
Answer:
Acceleration of the asteroid relative to the spacecraft = 2ε[tex]E^{2}[/tex]A/m
Explanation:
The maximum electric field in the beam = 2E
cross-sectional area of beam = A
The intensity of an electromagnetic wave with electric field is
I = cε[tex]E_{0} ^{2}[/tex]/2
for [tex]E_{0}[/tex] = 2E
I = 2cε[tex]E^{2}[/tex] ....equ 1
where
I is the intensity
c is the speed of light
ε is the permeability of free space
[tex]E_{0}[/tex] is electric field
Radiation pressure of an electromagnetic wave on an absorbing surface is given as
P = I/c
substituting for I from above equ 1. we have
P = 2cε[tex]E^{2}[/tex]/c = 2ε[tex]E^{2}[/tex] ....equ 2
Also, pressure P = F/A
therefore,
F = PA ....equ 3
where
F is the force
P is pressure
A is cross-sectional area
substitute equ 2 into equ 3, we have
F = 2ε[tex]E^{2}[/tex]A
force on a body = mass x acceleration.
that is
F = ma
therefore,
a = F/m
acceleration of the asteroid will then be
a = 2ε[tex]E^{2}[/tex]A/m
where m is the mass of the asteroid.
A uniform crate C with mass mC is being transported to the left by a forklift with a constant speed v1. What is the magnitude of the angular momentum of the crate about point A, that is, the point of contact between the front tire of the forklift and the ground
Answer:
The angular momentum of the crate is [tex]M_{C} V_{1} d[/tex]
Explanation:
mass of the crate = [tex]M_{C}[/tex]
speed of forklift = [tex]V_{1}[/tex]
The distance between the center of the mass and the point A = d
Recall that the angular moment is the moment of the momentum.
[tex]L = P*d[/tex] ..... equ 1
where L is the angular momentum,
P is the momentum of the system,
d is the perpendicular distance between the crate and the point on the axis about which the momentum acts. It is equal to d from the image
Also, we know that the momentum P is the product of mass and velocity
P = mv ....equ 2
in this case, the mass = [tex]M_{C}[/tex]
the velocity = [tex]V_{1}[/tex]
therefore, the momentum P = [tex]M_{C}[/tex][tex]V_{1}[/tex]
we substitute equation 2 into equation 1 to give
[tex]L = M_{C} V_{1} d[/tex]
An aging coyote cannot run fast enough to catch a roadrunner. He purchases on eBay a set of jet-powered roller skates, which provide a constant horizontal acceleration of 15.0 m/s2. The coyote starts at rest 70.0 m from the edge of a cliff at the instant the roadrunner zips past in the direction of the cliff.
Required:
a. Determine the minimum constant speed the roadrunner must have to reach the cliff before the coyote. At the edge of the cliff, the roadrunner escapes by making a sudden turn, while the coyote continues straight ahead. The coyote’s skates remain horizontal and continue to operate while he is in flight.
b. The cliff is 100 m above the flat floor of the desert. Determine how far from the base of the cliff the coyote lands.
c. Determine the components of the coyote’s impact velocity
Answer:
a) v_correcaminos = 22.95 m / s , b) x = 512.4 m ,
c) v = (45.83 i ^ -109.56 j ^) m / s
Explanation:
We can solve this exercise using the kinematics equations
a) Let's find the time or the coyote takes to reach the cliff, let's start by finding the speed on the cliff
v² = v₀² + 2 a x
they tell us that the coyote starts from rest v₀ = 0 and its acceleration is a=15 m / s²
v = √ (2 15 70)
v = 45.83 m / s
with this value calculate the time it takes to arrive
v = v₀ + a t
t = v / a
t = 45.83 / 15
t = 3.05 s
having the distance to the cliff and the time, we can find the constant speed of the roadrunner
v_ roadrunner = x / t
v_correcaminos = 70 / 3,05
v_correcaminos = 22.95 m / s
b) if the coyote leaves the cliff with the horizontal velocity v₀ₓ = 45.83 m / s, they ask how far it reaches.
Let's start by looking for the time to reach the cliff floor
y = y₀ + [tex]v_{oy}[/tex] t - ½ g t²
in this case y = 0 and the height of the cliff is y₀ = 100 m
0 = 100 + 45.83 t - ½ 9.8 t²
t² - 9,353 t - 20,408 = 0
we solve the quadratic equation
t = [9,353 ±√ (9,353² + 4 20,408)] / 2
t = [9,353 ± 13] / 2
t₁ = 11.18 s
t₂ = -1.8 s
Since time must be a positive quantity, the answer is t = 11.18 s
we calculate the horizontal distance traveled
x = v₀ₓ t
x = 45.83 11.18
x = 512.4 m
c) speed when it hits the ground
vₓ = v₀ₓ = 45.83 m / s
we look for vertical speed
v_{y} = [tex]v_{oy}[/tex] - gt
v_{y} = 0 - 9.8 11.18
v_{y} = - 109.56 m / s
v = (45.83 i ^ -109.56 j ^) m / s
Observe the process by which the grey and the red spheres are charged using the electrophorus. After each sphere is first charged, what are their charges
Answer:
The gray spheres is negatively charged while the red is positively charged
Explanation:
This is because theelectrophorus becomes less positive once it pulls some electrons away from the red sphere, but, the electrophorus is replaced on the slab and recharged by grounding it before it proceeds to charge the grey sphere, thereby giving it electrons and making it negatively charged
Answer:
The gray sphere has a positive charge and the red sphere has a positive charge.
A 1.5-kg mass attached to spring with a force constant of 20.0 N/m oscillates on a horizontal, frictionless track. At t = 0, the mass is released from rest at x = 10.0 cm. ( That is, the spring is stretched by 10.0 cm.) (a) Determine the frequency of the oscillations. (b) Determine the maximum speed of the mass. Where dos the maximum speed occur? (c) Determine the maximum acceleration of the mass. Where does the maximum acceleration occur? (d) Determine the total energy of teh oscillating system. (e) Express the displacement as a function of time.
Answer:
(a) f = 0.58Hz
(b) vmax = 0.364m/s
(c) amax = 1.32m/s^2
(d) E = 0.1J
(e) [tex]x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]
Explanation:
(a) The frequency of the oscillation, in a spring-mass system, is calulated by using the following formula:
[tex]f=\frac{1}{2\pi}\sqrt{\frac{k}{m}}[/tex] (1)
k: spring constant = 20.0N/m
m: mass = 1.5kg
you replace the values of m and k for getting f:
[tex]f=\frac{1}{2\pi}\sqrt{\frac{20.0N/m}{1.5kg}}=0.58s^{-1}=0.58Hz[/tex]
The frequency of the oscillation is 0.58Hz
(b) The maximum speed is given by:
[tex]v_{max}=\omega A=2\pi f A[/tex] (2)
A: amplitude of the oscillations = 10.0cm = 0.10m
[tex]v_{max}=2\pi (0.58s^{-1})(0.10m)=0.364\frac{m}{s}[/tex]
The maximum speed of the mass is 0.364 m/s.
The maximum speed occurs when the mass passes trough the equilibrium point of the oscillation.
(c) The maximum acceleration is given by:
[tex]a_{max}=\omega^2A=(2\pi f)^2 A[/tex]
[tex]a_{max}=(2\pi (0.58s^{-1}))(0.10m)=1.32\frac{m}{s^2}[/tex]
The maximum acceleration is 1.32 m/s^2
The maximum acceleration occurs where the elastic force is a maximum, that is, where the mass is at the maximum distance from the equilibrium point, that is, the acceleration.
(d) The total energy of the system is:
[tex]E=\frac{1}{2}kA^2=\frac{1}{2}(20.0N/m)(0.10m)^2=0.1J[/tex]
The total energy is 0.1J
(e) The displacement as a function of time is:
[tex]x(t)=Acos(\omega t)=Acos(2\pi ft)\\\\x(t)=0.1m\ cos(2\pi(0.58s^{-1})t)[/tex]
A skater on ice with arms extended and one leg out spins at 3 rev/s. After he draws his arms and the leg in, his moment of inertia is reduced to 1/2. What is his new angular speed
Answer:
The new angular speed is [tex]w = 6 \ rev/s[/tex]
Explanation:
From the question we are told that
The angular velocity of the spin is [tex]w_o = 3 \ rev/s[/tex]
The original moment of inertia is [tex]I_o[/tex]
The new moment of inertia is [tex]I =\frac{I_o}{2}[/tex]
Generally angular momentum is mathematically represented as
[tex]L = I * w[/tex]
Now according to the law of conservation of momentum, the initial momentum is equal to the final momentum hence the angular momentum is constant so
[tex]I * w = constant[/tex]
=> [tex]I_o * w _o = I * w[/tex]
where w is the new angular speed
So
[tex]I_o * 3 = \frac{I_o}{2} * w[/tex]
=> [tex]w = \frac{3 * I_o}{\frac{I_o}{2} }[/tex]
=> [tex]w = 6 \ rev/s[/tex]
g A change in the initial _____ of a projectile changes the range and maximum height of the projectile.
Answer:
Velocity.
Explanation:
Projectile motion is characterized as the motion that an object undergoes when it is thrown into the air and it is only exposed to acceleration due to gravity.
As per the question, 'any change in the initial velocity of the projectile(object having gravity as the only force) would lead to a change in the range as well as the maximum height of the projectile.' To illustrate numerically:
Horizontal range: As per expression:
R= ([tex]u^{2}[/tex]*sin2θ)/g
the range depending on the square of the initial velocity.
Maximum height: As per expression:
H= ([tex]u^{2}[/tex] * [tex]sin^{2}[/tex]θ )/2g
the maximum distance also depends upon square of the initial velocity.
A player is positioned 35 m[40 degrees W of S] of the net. He shoot the puck 25 m [E] to a teammate. What second displacement does the puck have to travel in order to make it to the net?
Answer:
x=22.57 m
Explanation:
Given that
35 m in W of S
angle = 40 degrees
25 m in east
From the diagram
The angle
[tex]\theta=90-40=50^o[/tex]
From the triangle OAB
[tex]cos40^o=\frac{35^2+25^2-x^2}{2\times 35\times 25}[/tex]
[tex]1340.57=35^2+25^2-x^2[/tex]
x=22.57 m
Therefore the answer of the above problem will be 22.57 m
A force of 44 N will stretch a rubber band 88 cm (0.080.08 m). Assuming that Hooke's law applies, how far will aa 11-N force stretch the rubber band? How much work does it take to stretch the rubber band this far?
Answer:
The rubber band will be stretched 0.02 m.
The work done in stretching is 0.11 J.
Explanation:
Force 1 = 44 N
extension of rubber band = 0.080 m
Force 2 = 11 N
extension = ?
According to Hooke's Law, force applied is proportional to the extension provided elastic limit is not extended.
F = ke
where k = constant of elasticity
e = extension of the material
F = force applied.
For the first case,
44 = 0.080K
K = 44/0.080 = 550 N/m
For the second situation involving the same rubber band
Force = 11 N
e = 550 N/m
11 = 550e
extension e = 11/550 = 0.02 m
The work done to stretch the rubber band this far is equal to the potential energy stored within the rubber due to the stretch. This is in line with energy conservation.
potential energy stored = [tex]\frac{1}{2}ke^{2}[/tex]
==> [tex]\frac{1}{2}* 550* 0.02^{2}[/tex] = 0.11 J
A skydiver falls toward the ground at a constant velocity. Which statement best applies Newton’s laws of motion to explain the skydiver’s motion?
Answer:
A: An upward force balances the downward force of gravity on the skydiver.
Explanation:
on edge! hope this helps!!~ (⌒▽⌒)☆