Using GRIGNARDS REAGENT convert methane to ethanol

Answer:

here, as we have known the elements of group 3A(13) such as aluminium , boron has three valance electron and in perodic table the elements are kept with similar proterties in same place so, their valance electron is 3.

hope it helps...

The number of valence electrons are in the electron dot structures for the elements in group 3A(13) is three.

The periodic table is organized into groups (vertical columns), periods (horizontal rows), and families (groups of elements that are similar). Elements in the same group have the same number of valence electrons.

Groups are the columns of the periodic table, and periods are the rows. There are 18 groups, and there are 7 periods plus the lanthanides and actinides.

There are two different numbering systems that are commonly used to designate groups, and you should be familiar with both.

The traditional system used in the United States involves the use of the letters A and B. The first two groups are 1A and 2A, while the last six groups are 3A through 8A. The middle groups use B in their titles.

Therefore, The number of valence electrons are in the electron dot structures for the elements in group 3A(13) is three.

Learn more about Groups in the periodic table, here:

https://brainly.com/question/30858972

#SPJ3

Answer and Explanation:

The buffer solution is composed by sodium acetate (CH₃COONa) and acetic acid (CH₃COOH). Thus, CH₃COOH is the weak acid and CH₃COO⁻ is the conjugate base, derived from the salt CH₃COONa.

If we add a strong base, such as barium hydroxide, Ba(OH)₂, the base will dissociate completely to give OH⁻ ions, as follows:

Ba(OH)₂ ⇒ Ba²⁺ + 2 OH⁻

The OH⁻ ions will react with the acid (CH₃COOH) to form the conjugate base CH₃COO⁻.

Initial number of moles of CH₃COOH = 0.40 mol/L x 1 L = 0.40 mol

Initial number of moles of CHCOO⁻= 0.31 mol/L x 1 L = 0.31 mol

moles of OH- added: 2 OH-/mol x 0.100 mol/L x 1 L = 0.200 OH-

According to this, the following are the answers to the sentences:

a. The number of moles of CH₃COOH will remain the same ⇒ FALSE

The number of moles of CH₃COOH will decrease, because they will react with OH⁻ ions

b. The number of moles of CH₃COO⁻ will increase ⇒ TRUE

Moles of CH₃COO⁻ will be formed from the reaction of the acid (CH₃COOH) with the base (OH⁻ ions)

c. The equilibrium concentration of H₃O⁺ will decrease ⇒ FALSE

The equilibrium concentration of OH⁻ is increased

d. The pH will decrease⇒ FALSE

pKa for acetic acid is 4.75. We add the moles of base to the acid concentration and we remove the same number of moles from the conjugate base in the Henderson-Hasselbach equation to calculate pH:

[tex]pH= pKa + log \frac{[conjugate base + base]}{[acid - base]}[/tex]

pH = 4.75 + log (0.31 mol + 0.20 mol)/(0.40 mol - 0.20 mol) = 5.15

Thus, the pH will increase.

Answer:

a

Explanation:

Matter can be volume or density. So, this concludes that it is when it takes up space.

Answer: A.

Explanation:

it takes up space

Answer:

1) R₃CO , H, H₃C, a carbon free radical

2) high temperature, ultraviolet irradiation

Explanation:

1) Homolysis leads to the formation of free radicals (species having a free electron). Thus, answer is :

R₃CO

H

H₃C

a carbon free radical

2) Homolysis require high temperature, ultraviolet irradiation.

Complete Question

The complete question is shown on the first uploaded image

Answer:

The  initial concentration is  [tex]C_f = 0.0022 \ M[/tex]

Explanation:

From the question we are told that

    The volume of solution A is  [tex]V_i = 10.0 mL[/tex]

    The concentration of A is [tex]C_i = 0.0200 \ M[/tex]

    The volume of solution B  is  [tex]V_B = 10.0mL[/tex]

    The volume of water is  [tex]V_{w } = 70.0 mL[/tex]

Generally the law of dilution is mathematically represented as

             [tex]C_i * V_i = C_f * V_f[/tex]

Where  [tex]C_f[/tex] is the concentration of  the mixture

            [tex]V_f[/tex] is the volume of the mixture which is mathematically evaluated as

            [tex]V_f = 10 + 10 + 70[/tex]

           [tex]V_f = 90mL[/tex]

So  

      [tex]C_f = \frac{C_i * V_i}{ V_f}[/tex]

substituting values

       [tex]C_f = \frac{0.0200 * 10 }{90}[/tex]

       [tex]C_f = 0.0022 \ M[/tex]

Note the mixture obtained is  [tex]KIO_3[/tex]

Answer:

The molar mass of the unknown gas is [tex]\mathbf{ 51.865 \ g/mol}[/tex]

Explanation:

Let assume that  the gas is  O2 gas

O2 gas is to effuse through a porous barrier in time t₁ = 4.98 minutes.

Under the same conditions;

the same number of moles of an unknown gas requires  time t₂  =  6.34 minutes to effuse through the same barrier.

From Graham's Law of Diffusion;

Graham's Law of Diffusion states that, at a constant temperature and pressure; the rate of diffusion of a gas is inversely proportional to the square root of its density.

i.e

[tex]R \ \alpha \ \dfrac{1}{\sqrt{d}}[/tex]

[tex]R = \dfrac{k}{d}[/tex]  where K = constant

If we compare the rate o diffusion of two gases;

[tex]\dfrac{R_1}{R_2}= {\sqrt{\dfrac{d_2}{d_1}}[/tex]

Since the density of a gas d is proportional to its relative molecular mass M. Then;

[tex]\dfrac{R_1}{R_2}= {\sqrt{\dfrac{M_2}{M_1}}[/tex]

Rate is the reciprocal of time ; i.e

[tex]R = \dfrac{1}{t}[/tex]

Thus; replacing the value of R into the above previous equation;we have:

[tex]\dfrac{R_1}{R_2}={\dfrac{t_2}{t_1}}[/tex]

We can equally say:

[tex]{\dfrac{t_2}{t_1}}= {\sqrt{\dfrac{M_2}{M_1}}[/tex]

[tex]{\dfrac{6.34}{4.98}}= {\sqrt{\dfrac{M_2}{32}}[/tex]

[tex]M_2 = 32 \times ( \dfrac{6.34}{4.98})^2[/tex]

[tex]M_2 = 32 \times ( 1.273092369)^2[/tex]

[tex]M_2 = 32 \times 1.62076418[/tex]

[tex]\mathbf{M_2 = 51.865 \ g/mol}[/tex]

Answer:

See explanation.

Explanation:

Hello,

In this case, we can show how the empirical formula is found by following the shown below procedure:

1. Compute the moles of carbon in carbon dioxide as the only source of carbon at the products:

[tex]n_C=0.01962molCO_2*\frac{1molC}{1molCO_2} =0.01962molC[/tex]

2. Compute the moles of hydrogen in water as the only source of hydrogen at the products:

[tex]n_H=0.01961molH_2O*\frac{2molH}{1molH_2O}=0.03922molH[/tex]

3. Compute the mass of oxygen by subtracting the mass of both carbon and hydrogen from the 0.4647-g sample:

[tex]m_O=0.4647g-0.01962molC*\frac{12gC}{1molC}-0.03922molH*\frac{1gH}{1molH} =0.1900gO[/tex]

4. Compute the moles of oxygen by using its molar mass:

[tex]n_O=0.1900gO*\frac{1molO}{16gO}=0.01188molO[/tex]

5. Divide the moles of carbon, hydrogen and oxygen by the moles of oxygen (smallest one) to find the subscripts in the empirical formula:

[tex]C=\frac{0.01962}{0.01188}=1.65\\ \\H=\frac{0.03922}{0.01188} =3.3\\\\O=\frac{0.01188}{0.01188} =1[/tex]

6. Search for the closest whole number (in this case multiply by 2):

[tex]C_3H_6O_2[/tex]

Moreover, the empirical formula suggests this compound could be carboxylic acid since it has two oxygen atoms, nevertheless, this is not true since the molar mass is 222.27 g/mol, therefore, we should compute the molar mass of the empirical formula, that is:

[tex]M=12*3+1*6+16*2=74g/mol[/tex]

Which is about three times in the molecular formula, for that reason, the actual formula is:

[tex]C_9H_{18}O_6[/tex]

It suggest that the compound has a highly oxidizing character due to the presence of oxygen, therefore, we cannot predict the distribution of the functional groups as it could contain, carboxyl, carbonyl, hydroxyl or even peroxi.

Best regards.

Answer:

the answer to this question is C

The electron configuration of the iodide ion is 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶. The correct option is option C.

The arrangement of an atom's or molecule's electrons in their respective atomic or molecular orbitals is known as its electron configuration; for instance, the electron configuration of the neon atom is 1s2 2s2 2p6.

According to electronic configurations, electrons move individually within each orbital while interacting with the average field produced by all other orbitals. The corrosion potential and reactivity of an atom may be calculated from its electron configuration. The electron configuration of the iodide ion is  1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁶4d¹⁰5s²5p⁶.

Therefore, the correct option is option C.

To learn more about electron configuration, here:

https://brainly.com/question/30161188

#SPJ6

Answer:

H₂(g) + Cu²⁺(aq) → 2H⁺(aq) + Cu(s)

Explanation:

In a redox reaction, one half-reaction is the oxidation (where the atom loss electrons) whereas the other reaction is the reduction (Where the atom is gaining electrons.

In the reactions:

H₂(g) → 2H⁺(aq) + 2e⁻ oxidation

Here, the reaction is written as the oxidation because the hydrogen H₂ is in oxidation state 0 and H⁺ in +1. That means each atom is loosing one electron.

Cu²⁺(aq) + 2e⁻ → Cu(s) reduction

And here, the Cu²⁺ is in +2 oxidation state and after the reaction is in Cu(s) 0 state. Thus, each atom is gaining 2 electrons.

The sum of both reactions is:

H₂(g) + Cu²⁺(aq) + 2e⁻ → 2H⁺(aq) + 2e⁻ + Cu(s)

Subtracting the electrons in both sides of the reaction:

Answer:

The colour of the orange solution becomes yellow.  

Explanation:

1. Before adding NaOH

Assume the picture showed a beaker of potassium chromate and one of potassium dichromate.

Both solutions are involved in the same equilibrium:

[tex]\rm\underbrace{\hbox{2CrO$_{4}^{2-}$(aq)}}_{\text{yellow}} +2H^{+}(aq) \rightleftharpoons \, \underbrace{\hbox{Cr$_{2}$O$_{7}^{2-}$}}_{\text{orange}} + H_{2}O[/tex]

The first beaker contains mostly chromate ions with a few dichromate ions.

The position of equilibrium lies to the left and the solution is yellow.

The second beaker contains mostly dichromate ions with a few chromate ions.

The position of equilibrium lies to the right and the solution is orange.

2. After adding NaOH

According to Le Châtelier's Principle, when we apply a stress to a system at equilibrium, the system will respond in a way that tends to relieve the stress.

Beaker 1

If you add OH⁻ to the equilibrium solution, it removes the H⁺ (by forming water).

The system responds by having the dichromate react with water to replace the H⁺.  

At the same time, the system forms more of the yellow chromate ion.

The position of equilibrium shifts to the left.

However, the solution is already yellow, so you see no change in colour.

Beaker 2

The reaction is the same as in Beaker 1.

This time, however, as the dichromate ion disappears, do does its orange colour.

Also, the yellow chromate is being formed and its yellow colour appears .

The colour changes from orange to yellow.

Answer:

THE ENTHALPY OF SOLUTION IS 3153.43 J/MOL OR 3.15 KJ/MOL.

Explanation:

1. write out the variables given:

Mass of Calcium chloride = 13.6 g

Change in temperature = 31.75°C - 25.00°C = 6.75 °C

Density of the solution = 1.000 g/mL

Volume = 100.0 mL = 100.0 mL

Specific heat of water = 4.184 J/g °C

Mass of the water = unknown

2. calculate the mass of waterinvolved:

We must first calculate the mass of water in the bomb calorimeter

Mass = density  * volume

Mass = 1.000 * 100

Mass = 0.01 g

3. calculate the quantity of heat evolved:

Next is to calculate the quantity of heat evolved from the reaction

Heat = mass * specific heat of water * change in temperature

Heat = mass of water * specific heat *change in temperature

Heat = 13.6 g * 4.184 * 6.75

Heat = 13.6 g * 4.184 J/g °C * 6.75 °C

Heat = 384.09 J

Hence, 384.09J is the quantity of heat involved in the reaction of 13.6 g of calcium chloride in the calorimeter.

4. calculate the molar mass of CaCl2:

Next is to calculate the molar mas of CaCl2

Molar mass = ( 40 + 35.5 *2) = 111 g/mol

The number of moles of 13.6 g of CaCl2 is then:

Number of moles of CaCl2 = mass / molar mass

Number of moles = 13.6 g / 111 g/mol

Number of moles = 0.1225 mol

So 384.09 J of heat was involved in the reaction of 1.6 g of CaCl2 in a calorimter which translates to 0.1225 mol of CaCl2..

5. Calculate the enthalpy of solution in kJ/mol:

If 1 mole of CaCl2 is involved, the heat evolved is therefore:

Heat per mole = 384.09 J / 0.1225 mol

Heat = 3 135.43 J/mol

The enthalpy of solution is therefore 3153.43 J/mol or 3.15 kJ/mol.

Answer:

The answer to your question is given below

Explanation:

The balanced equation for the reaction is given below:

CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)

1. Writing an expression for the equilibrium constant, K.

The equilibrium constant, K for a reaction is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.

Thus, we can write the equilibrium constant, K for the reaction as follow:

CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)

K = [CaCO3] [H2]⁴ / [CaO] [CH4] [H2O]²

2. Based on the value of K, more products will be in the equilibrium mixture since the value of K is a positive large number.

Answer:

Option C. Will always.

Explanation:

A spontaneous reaction is a reaction that occurs without an external supply of heat.

This implies that spontaneous reaction will always occur as no external supply of heat is needed.

Answer:

+2

Explanation:

Because the charge of the chloride ion is negative, that means that the charge of the magnesium ion must be positive since cations and anions go together, not cation and cation nor anion and anion. Using the "reverse criss-cross method", since the subscript of Mg is 1, that means that this is the lowest whole number ratio so we don't need to worry about simplifying. Therefore, since the charge of Cl is 2, the answer is +2.

Answer:

Explanation: M(PCL5)= 31 + 5(35.5)

=208.5g/mol

M(H20)= 18g/mol

n(PCL5) = 75.5÷208.5

= 0.362mol

n(HCl)/n(PCL5)= 5/1

n(HCl)= 5×0.362

=1.81mol of HCl

Answer:

2. Due to the possession of resonance

Explanation:

In the benzene ring, the electrons that results in the bonds between the carbon atoms are delocalized. That is, they do not belong to a specific carbon atom. It is this unique feature that enables them to have a bond length between single and double bond lengths.

This feature is as a result of resonance.

The correct option is 2.

Answer:

the density if vinegar will also be needed

Explanation:

Because this is an experiment of volumetric analysis

Answer:

1.22 × 10³ g

Explanation:

Step 1: Write the balanced equation

P₄O₁₀ + 6 H₂O ⇒ 4 H₃PO₄

Step 2: Calculate the moles of H₃PO₄ produced by 3.10 moles of P₄O₁₀

The molar ratio of P₄O₁₀ to H₃PO₄ is 1:4. The moles of H₃PO₄ produced are 4/1 × 3.10 mol = 12.4 mol

Step 3: Calculate the mass corresponding to 12.4 moles of H₃PO₄

The molar mass of H₃PO₄ is 97.99 g/mol.

[tex]12.4 mol \times \frac{97.99g}{mol} = 1.22 \times 10^{3} g[/tex]

Answer:

[tex]\Delta _cH=-1328.3kJ/mol[/tex]

Explanation:

Helllo,

In this case, for the given chemical reaction in gaseous state:

[tex]CH_3OCH_3+3O_2\rightarrow 2CO_2+3H_2O[/tex]

We comoute the combustion enthalpy as the reaction enthalpy for one mole of fuel (dimethyl ether) considering the formation enthalpy of each given substance and whether they are reactants (subtracting) or products (adding), therefore we write:

[tex]\Delta _cH=2*\Delta _fH_{CO_2}+3*\Delta _fH_{H_2O}-\Delta _fH_{CH_3OCH_3}-3*\Delta _fH_{O_2}[/tex]

Whereas the formation enthalpies for carbon dioxide, water, dimethyl ether and oxygen are -393.5, -241.8, -184.1 and 0 kJ/mol respectively, thereby, the combustion enthalpy turns out:

[tex]\Delta _cH=2(-393.5)+3*(-241.8)-(-184.1)-3(0)\\\\\Delta _cH=-1328.3kJ/mol[/tex]

Notice that enthalpy of formation of oxygen is zero since forming an element has no chemical sense, it just exists as it has been early demonstrated.

Regards.

Considering the definition of bond and the different type of bonds, valence is not one of  the types of bonds.

A chemical bond is defined as the force by which the atoms of a compound are held together. These are electromagnetic forces that give rise to different types of chemical bonds.

In other words, a chemical bond is the force that joins atoms to form chemical compounds and confers stability to the resulting compound.

The covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.

An ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions.

Metallic bonds are a type of chemical bond that occurs only between atoms of the same metallic element. In this way, metals achieve extremely compact, solid and resistant molecular structures, since the atoms that share their valence electrons.

In summary, valence is not one of  the types of bonds. The types of bonds are covalent, ionic and metallic.

Learn more about chemical bonds:

https://brainly.com/question/25385832

https://brainly.com/question/13178368

#SPJ1

Answer:

483.27 minutes

Explanation:

using second faradays law of electrolysis

Answer:

CH3CH2CH2COOH<CH2(F)CH2CH2COOH<CH3CH(F)CH2COOH<CH2(F)CH(F)CH2COOH

Explanation:

We know that the presence of highly electronegative elements in carboxylic acid molecules lead to -I inductive effect. This implies that electrons are withdrawn along the chain towards the electronegative element. As electrons are withdrawn towards the electronegative element, the electron cloud of the carbonyl- hydrogen bond in the acid weakens and the hydrogen can now be easily lost as a proton, that is , the molecule becomes more acidic.

The -I inductive effect increases with increase in the number of electronegative elements present in the molecule and the proximity of the electronegative element to the carbonyl group. The closer the electronegative element is to the carbonyl group, the greater the acidity of the molecule since the -I inductive effect dies out with increasing distance from the carbonyl group. Also, the more the number of electronegative elements in the molecule, the greater the - I inductive effect and the greater the acidity of the molecule, hence the answer.

D. The name for the set of independent and dependent variables that will be controlled by the scientist.

The statement, that describes the ‘control’ in an experiment is "the name for the set of independent and dependent variables that will be controlled by the scientist."

A control is an element in an experiment that remains intact or unaffected by other variables. An experiment or observation aiming to minimise the influence of variables other than the independent variable is referred to as a scientific control. It serves as a standard or point of reference against which other test findings are measured.

In a scientific experiment, an independent variable is the variable that is modified or manipulated in order to assess the effects on the dependent variable. In a scientific experiment, the dependent variable is the variable that is being tested and measured. The designation given to the set of independent and dependent variables that the scientist will regulate.

Hence the correct option is D.

Learn more about control in an experiment here

https://brainly.in/question/19374703

#SJP3

Answer:

0.109 mol/tablespoon

Explanation:

6.37 g/ 58.5 mol = 0.10888888 mol (0.109 significantly)

Answer:

A: 0.109

Explanation:

Edge 2020

Answer:

The element nitrogen forms an anion with the charge -3. The symbol for this ion is N³⁻, and the name is nitride. The number of electrons in this ion is 10.

Explanation:

The element nitrogen is in the Group 15 in the Periodic Table, so it tends to gain 3 electrons (3 negative charges) to fill its valance shell with 8 electrons.

The element nitrogen forms an anion with the charge -3. The symbol for this ion is N³⁻, and the name is nitride. The number of electrons in this ion is 10 (the original 7 plus the 3 gained). It is isoelectronic with the gas Neon, which accounts for its stability.

Answer:

Cooking a pot of soup

Explanation:

id say that because when you freeze ice cream, its already frozen, so no heat is being released. melting ice wouldn't be the answer because, once again, it is already frozen, and no heat is being released.

Answer:

the correct answer is freezing ice cream

Explanation:

i took the test & got this question correct. also, heat energy is released when freezing because there is no heat energy involved.

Answer:

[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, we can write the law of mass action for the undergoing chemical reaction, based on the rates and the stoichiometric coefficients:

[tex]\frac{1}{-2}r_{NH_3} =\frac{1}{1} r_{N_2}=\frac{1}{3}r_{H_2}[/tex]

In such a way, knowing the rate of formation hydrogen (H₂), we can know the  rate of change of ammonia, that must be negative for consumption:

[tex]r_{NH_3} =\frac{-2}{3}r_{H_2}=\frac{-2}{3}*9.00\frac{M}{s} \\\\r_{NH_3} =-6.00\frac{M}{s}[/tex]

Nevertheless, the absolute magnitude will be positive:

[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]

Best regards.

Answer:

[tex]V=27992L=28.00m^3[/tex]

Explanation:

Hello,

In this case, the combustion of methane is shown below:

[tex]CH_4+2O_2\rightarrow CO_2+2H_2O[/tex]

And has a heat of combustion of −890.8 kJ/mol, for which the burnt moles are:

[tex]n_{CH_4}=\frac{-1.00x10^6kJ}{-890.8kJ/mol}= 1122.6molCH_4[/tex]

Whereas is consider the total released heat to the surroundings (negative as it is exiting heat) and the aforementioned heat of combustion. Then, by using the ideal gas equation, we are able to compute the volume at 25 °C (298K) and 745 torr (0.98 atm) that must be measured:

[tex]PV=nRT\\\\V=\frac{nRT}{P}=\frac{1122.6mol*0.082\frac{atm*L}{mol*K}*298K}{0.98atm}\\\\V=27992L=28.00m^3[/tex]

Best regards.

Answer:

2ErF3 + 3Mg → 2Er + 3MgF2

Explanation:

Erbium metal is a member of the lanthaniod series. It reacts with halogens directly to yield erbium III halides such as erbium III chloride, Erbium III fluoride etc.

Erbium metal (Er) can be prepared by reacting erbium(III) fluoride with magnesium; the products are erbium metal and magnesium fluoride. This is a normal redox process in which the Erbium metal is reduced while the magnesium is oxidized. The balanced reaction equation of this process is; 2ErF3 + 3Mg → 2Er + 3MgF2

Answer:

Edge length of the unit cell is 4.07x10⁻¹⁰m

Explanation:

In a face-centered cubic structure, the edge, a, could be obtained using pythagoras theorem knowing the hypotenuse of the unit cell, b, is equal to 4r:

a² + a² = b² = (4r)²

2a² = 16r²

a = √8 r

That means edge lenght is = √8 r

adius

As radius of Silver is 144pm = 144x10⁻¹²m:

a = √8 r

a = √8 ₓ 144x10⁻¹²m

a = 4.07x10⁻¹⁰m