Answer:
All ionic substances are written as separate ions in solution
All ionic substances are written as separate ions in solution in a complete ionic equation. Therefore, option (C) is correct.
What is the ionic equation?A complete ionic equation can be described as a particular chemical equation where charged atoms such as ions are expressed in a given solution. The complete ionic equations always contain all ions that are formed or act during a particular chemical reaction.
The net ionic equation can be described as an equation that provides information about ions that exists in an aqueous medium. Salts get dissolved in polar solvents such as water which are present as cations and anions in their dissolved state.
The ionic equation shows the chemical species that undergo a chemical change. The ions which are present on both sides of the equation are considered to be spectator ions. Therefore, in order to obtain the net ionic equation we can eliminate them.
Learn more about complete ionic equations, here:
brainly.com/question/13879496
#SPJ5
Consider the insoluble compound nickel(II) hydroxide , Ni(OH)2 . The nickel ion also forms a complex with cyanide ions . Write a balanced net ionic equation to show why the solubility of Ni(OH)2 (s) increases in the presence of cyanide ions and calculate the equilibrium constant for this reaction. For Ni(CN)42- , Kf = 1.0×1031 . Use the pull-down boxes to specify states such as (aq) or (s).
Answer: Equilibrium constant for this reaction is [tex]2.8 \times 10^{15}[/tex].
Explanation:
Chemical reaction equation for the formation of nickel cyanide complex is as follows.
[tex]Ni(OH)_{2}(s) + 4CN^{-}(aq) \rightleftharpoons [Ni(CN)_{4}^{2-}](aq) + 2OH^{-}(aq)[/tex]
We know that,
K = [tex]K_{f} \times K_{sp}[/tex]
We are given that, [tex]K_{f} = 1.0 \times 10^{31}[/tex]
and, [tex]K_{sp} = 2.8 \times 10^{-16}[/tex]
Hence, we will calculate the value of K as follows.
K = [tex]K_{f} \times K_{sp}[/tex]
K = [tex](1.0 \times 10^{31}) \times (2.8 \times 10^{-16})[/tex]
= [tex]2.8 \times 10^{15}[/tex]
Thus, we can conclude that equilibrium constant for this reaction is [tex]2.8 \times 10^{15}[/tex].
Convert 150 K to degrees C.
Answer:
K = 150, C = - 123.15°
Explanation:
Kelvin = Celcius + 273.15 / 0 Kelvin = - 273.14 C
_____________________________________
Thus,
150 K = Celcius + 273.15,
150 - 273.15 = C,
C = -123.15 degrees
Solution, C = - 123.15°
Answer:
C=-123.15
Explanation:
This is easy
an auto of an element has 17 protons in its nucleus.a) write the electronic configuration of the atom.b)to what period and group does the element belong
Answer:
i hope it will help you
Explanation:
electronic configuration 1s²,2s,²2p^6,3s²3p^6,4s^1
as it has one electron in its valence shell so it is the member of group 1A(ALKALI METALS) and the number of shells is 4 so it is in period 4
When 5.00 g of Al2S3 and 2.50 g of H2O are reacted according to the following reaction: Al2S3(s) + 6 H2O(l) → 2 Al(OH)3(s) + 3 H2S(g) 2.10 g were obtained. What is the percent yield of the reaction?
Answer:
[tex]Y=58.15\%[/tex]
Explanation:
Hello,
For the given chemical reaction:
[tex]Al_2S_3(s) + 6 H_2O(l) \rightarrow 2 Al(OH)_3(s) + 3 H_2S(g)[/tex]
We first must identify the limiting reactant by computing the reacting moles of Al2S3:
[tex]n_{Al_2S_3}=5.00gAl_2S_3*\frac{1molAl_2S_3}{150.158 gAl_2S_3} =0.0333molAl_2S_3[/tex]
Next, we compute the moles of Al2S3 that are consumed by 2.50 of H2O via the 1:6 mole ratio between them:
[tex]n_{Al_2S_3}^{consumed}=2.50gH_2O*\frac{1molH_2O}{18gH_2O}*\frac{1molAl_2S_3}{6molH_2O}=0.0231mol Al_2S_3[/tex]
Thus, we notice that there are more available Al2S3 than consumed, for that reason it is in excess and water is the limiting, therefore, we can compute the theoretical yield of Al(OH)3 via the 2:1 molar ratio between it and Al2S3 with the limiting amount:
[tex]m_{Al(OH)_3}=0.0231molAl_2S_3*\frac{2molAl(OH)_3}{1molAl_2S_3}*\frac{78gAl(OH)_3}{1molAl(OH)_3} =3.61gAl(OH)_3[/tex]
Finally, we compute the percent yield with the obtained 2.10 g:
[tex]Y=\frac{2.10g}{3.61g} *100\%\\\\Y=58.15\%[/tex]
Best regards.
Nitrogen monoxide is produced by combustion in an automobile engine. For the following reaction, 4.36 grams of nitrogen monoxide are mixed with excess oxygen gas . The reaction yields 5.46 grams of nitrogen dioxide . nitrogen monoxide ( g ) oxygen ( g ) nitrogen dioxide ( g ) What is the theoretical yield of nitrogen dioxide
Answer:
[tex]6.68~g~NO_2[/tex]
Explanation:
We have to start with the combustion reaction:
[tex]NO~+~O_2~->~NO_2[/tex]
Then we can balance the reaction:
[tex]2NO~+~O_2~->~2NO_2[/tex]
If we want to find the theoretical yield, we have to calculate the amount of [tex]NO_2[/tex]. To do this, we have to first convert the 4.36 g of [tex]NO[/tex] to moles [tex]NO[/tex] (using the molar mass 30 g/mol), then we have to convert from moles of [tex]NO[/tex] to moles of [tex]NO_2[/tex] (using the molar ratio) finally, we have to convert from moles of [tex]NO_2[/tex] to grams of [tex]NO_2[/tex] (using the molas mass 46 g/mol), so:
[tex]4.36~g~NO\frac{1~mol~NO}{4.36~g~NO}\frac{2~mol~NO_2}{2~mol~NO}\frac{46~g~NO_2}{1~mol~NO_2}=6.68~g~NO_2[/tex]
I hope it helps!
What is the net ionic equation of the reaction of MgSO4 with Ba(NO3)2 ?
Answer:
Ba(+2)(aq) + SO4(-2)(aq) -----> BaSO4(s)
Explanation:
Take a look at the attachment below;
artaric acid, H2C4H4O6, has two acidic hydrogens. The acid is often present in wines and precipitates from solution as the wine ages. A solution containing an unknown concentration of the acid is titrated with NaOH. It requires 21.65 mL of 0.3500 M NaOH solution to titrate both acidic protons in 50.00 mL of the tartaric acid solution. You may want to reference (Pages 149 - 153) Section 4.6 while completing this problem. Part A Write a balanced net ionic equation for the neutralization reaction. Express your answer as a chemical equation including phases.
Answer:
2H⁺(aq) + + 2OH⁻(aq) → 2H₂O(l)
Explanation:
A acid that has two acidic hydrogens requires to moles of NaOH per mole of acid producing the salt of the acid and water.
If the acid is tartaric acid, H₂C₄H₄O₆, the reaction with NaOH is:
H₂C₄H₄O₆(aq) + 2NaOH(aq) → 2H₂O(l) + 2NaC₄H₄O₆(aq)
Now, ions in solution in the reaction are:
2H⁺(aq) + C₄H₄O₆²⁻(aq) + 2Na⁺(aq) + 2OH⁻(aq) → 2H₂O(l) + 2Na⁺(aq) +C₄H₄O₆²⁻(aq)
Thus, net ionic equation (Lisiting only the ions involved in the reaction) is:
2H⁺(aq) + + 2OH⁻(aq) → 2H₂O(l)The amount of calcium in a 15.0-g sample was determined by converting the calcium to calcium oxalate, CaC2O4. The CaC2O4 weighed 40.3 g. What is the percent of calcium in the original sample
Answer:
128 gram of CaC2O4 contains 40 gram of Calcium
40.3 gram of CaC2O4 cotnains = 40*40.3/128 = 12.59 gram of Calcium
out of 15 gram 12.59 gram is Calcaim that means around 50% of orginal sample has Calcium
A certain lightbulb containing argon at 1.20 atm and 18°C is
heated to 85°C at constant volume. Calculate its final pressure
(in atm).
Answer:
certain lightbulb containing argon at 1.20 atm and 18 0 C is heated to 85 0 C at constant volume. What is the final pressure of argon in the lightbulb (in atm)? P 1 T 1 P 2 T 2 ... Ideal Gas Equation 5.4 Charles' law: V T (at constant n and P ) ... Consider a case in which two gases, A and B , are in a container of volume V.
Explanation:
Which group of diamagnetic transition metals exhibits trends in density and melting points that don't match the same trends seen in other groups?
A. Group 12
B. Group 3
C. Group 11
D. Group 7
Answer:
Group 12
Explanation:
Group 12 transition metals include; zinc cadmium, mercury and copernicium. Because of their striking difference in property when compared to other transition elements, they are sometimes called post-transition elements.
These elements possess completely filled ns and nd orbitals hence they are diamagnetic. They have the lowest melting points and densities among all transition metals. Their densities in gcm^-3 are; Zn (7.14), Cd(8.65) and Hg (13.5). We can see that unlike other transition metal groups, their densities vary only within a narrow margin hence they have properties slightly different from other transition elements.
1. Determine whether the following hydroxide ion concentrations ([OH−]) correspond to acidic, basic, or neutral solutions by estimating their corresponding hydronium ion concentrations ([H3O+] using the ion product constant of water (Kw).
Kw = [H3O+][OH−] = [1×10−7 M][1×10−7 M] = 1×10−14 M
Hydronium ion concentration [H3O+] Solution condition
Greater than 1×10−7 M Acidic
Equal to 1×10−7 M Neutral
Less than 1×10−7 M Basic
Drag the appropriate items to their respective bins.
1. [OH−] = 6×10−12 M
2. [OH−] = 9×10−9 M
3. [OH−] = 8×10−10 M
4. [OH−] = 7×10−13 M
5. [OH−] = 2×10−2 M
6. [OH−] = 9×10−4 M
7. [OH−] = 5×10−5 M
8. [OH−] = 1×10−7 M
A. Acidic
B. Neutral
C. Basic
2. A solution has [H3O+] = 5.2×10−5M . Use the ion product constant of water
Kw=[H3O+][OH−]
to find the [OH−] of the solution.
3. A solution has [OH−] = 2.7×10−2M . Use the ion product constant of water
Kw=[H3O+][OH−]
to find the [H3O+] of the solution.
Answer:
Question 1.
1. [OH−] = 6×10−12 M is less than 1 * 10⁻⁷, therefore is acidic.
2. [OH−] = 9×10−9 M is less than 1 * 10⁻⁷, therefore is acidic.
3. [OH−] = 8×10−10 M is less than 1 * 10⁻⁷, therefore is acidic.
4. [OH−] = 7×10−13 M is less than 1 * 10⁻⁷, therefore is acidic.
5. [OH−] = 2×10−2 M is greater than 1 * 10⁻⁷, therefore is basic.
6. [OH−] = 9×10−4 M is greater than 1 * 10⁻⁷, therefore is basic.
7. [OH−] = 5×10−5 M is greater than 1 * 10⁻⁷, therefore is basic.
8. [OH−] = 1×10−7 M is equal to 1 * 10⁻⁷, therefore is neutral
Question 2:
[OH⁻] = 1.92 * 10⁻⁸ M
Question 3:
[H₃O⁺] = 3.70 * 10⁻¹¹ M
Explanation:
The ion product constant of water Kw = [H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M² is a constant which gives the product of the concentrations of hydronium and hydroxide ions of dissociated pure water. The concentrations of the two ions are both equal to 1 * 10⁻⁷ in pure water.
A solution that has [OH⁻] greater than 1 * 10⁻⁷ is basic while one with [OH⁻] less than 1 * 10⁻⁷ is acidic.
1. [OH−] = 6×10−12 M is less than 1 * 10⁻⁷, therefore is acidic.
2. [OH−] = 9×10−9 M is less than 1 * 10⁻⁷, therefore is acidic.
3. [OH−] = 8×10−10 M is less than 1 * 10⁻⁷, therefore is acidic.
4. [OH−] = 7×10−13 M is less than 1 * 10⁻⁷, therefore is acidic.
5. [OH−] = 2×10−2 M is greater than 1 * 10⁻⁷, therefore is basic.
6. [OH−] = 9×10−4 M is greater than 1 * 10⁻⁷, therefore is basic.
7. [OH−] = 5×10−5 M is greater than 1 * 10⁻⁷, therefore is basic.
8. [OH−] = 1×10−7 M is equal to 1 * 10⁻⁷, therefore is neutral
Question 2:
Kw = [H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M²
[H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M²
[OH⁻] = 1 * 10⁻¹⁴ M²/ [H₃O⁺]
[OH⁻] = 1 * 10⁻¹⁴ M²/5.2*10⁻⁵ M
[OH⁻] = 1.92 * 10⁻⁸ M
Question 3:
Kw = [H₃O⁺][OH⁻] = 1 * 10⁻¹⁴ M²
[H₃O⁺][OH⁻] = 1 * 10⁻¹⁴
[H₃O⁺] = 1 * 10⁻¹⁴ M²/ [OH⁻]
[H₃O⁺] = 1 * 10⁻¹⁴ M²/ 2.7 * 10⁻² M
[H₃O⁺] = 3.70 * 10⁻¹¹ M
The lock-and-key model and the induced-fit model are two models of enzyme action explaining both the specificity and the catalytic activity of enzymes. Following are several statements concerning enzyme and substrate interaction. Indicate whether each statement is part of the lock-and-key model, the induced-fit model, or is common to both models.
a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate.
b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex.
c. Enzyme active site has a rigid structure complementary
d. Substrate binds to the enzyme through noncovalent interactions
Answer:
The lock-and-key model:
c. Enzyme active site has a rigid structure complementary
The induced-fit model:
a. Enzyme conformation changes when it binds the substrate so the active site fits the substrate.
Common to both The lock-and-key model and The induced-fit model:
b. Substrate binds to the enzyme at the active site, forming an enzyme-substrate complex.
d. Substrate binds to the enzyme through non-covalent interactions
Explanation:
Generally, the catalytic power of enzymes are due to transient covalent bonds formed between an enzyme's catalytic functional group and a substrate as well as non-covalent interactions between substrate and enzyme which lowers the activation energy of the reaction. This applies to both the lock-and-key model as well as induced-fit mode of enzyme catalysis.
The lock and key model of enzyme catalysis and specificity proposes that enzymes are structurally complementary to their substrates such that they fit like a lock and key. This complementary nature of the enzyme and its substrates ensures that only a substrate that is complementary to the enzyme's active site can bind to it for catalysis to proceed. this is known as the specificity of an enzyme to a particular substrate.
The induced-fit mode proposes that binding of substrate to the active site of an enzyme induces conformational changes in the enzyme which better positions various functional groups on the enzyme into the proper position to catalyse the reaction.
The element silver has an atomic weight of 108 and consists of two stable isotopes silver-107 and silver-109. The isotope silver-107 has a mass of 107 amu and a percent natural abundance of 51.8 %. The isotope silver-109 has a percent natural abundance of 48.2 %. What is the mass of silver-109
Answer:
109
Explanation:
Let silver-107 be isotope A
Let silver-109 be isotope B
Let silver-107 abundance be A%
Let silver-109 abundance be B%
The following data were obtained from the question:
Atomic weight of silver = 108
Mass of isotope A (silver-107) = 107
Abundance of isotope A (silver-107) = 51.8%
Abundance of isotope B (silver-109) = 48.2%
Mass of isotope B (silver-109) =?
Now, we shall determine the mass silver-109 as follow:
Atomic weight = [(Mass of A x A%)/100] + [(Mass of B x B%)/100]
108 = [(107 x 51.8)/100] + [(Mass of B x 48.2)/100]
108 = 55.426 + (Mass of B x 0.482)
Collect like terms
Mass of B x 0.482 = 108 – 55.426
Mass of B x 0.482 = 52.574
Divide both side by 0.482
Mass of B = 52.574/0.482
Mass of B = 109
Therefore, the mass of silver-109 is 109.
What is the coefficient for oxygen in the balanced equation? C 5H 12 + ? O2 → ? CO2 + ? H2O. 2 4 5 6 8
Answer:
8
Explanation:
When you balance the entire equation, you should get:
C5H12 + 8O2 ---> 5CO2 + 6H2O
A friend asks you to help them decide which crackers are healthier. Comparing approximately equal serving sizes of 1 cracker (approx. 4.5 g Breton serving size vs. 4.7 g Triscuit), which would be a better choice with regards to calories, fat and sodium content?
a. Breton
b. Triscsuit
Answer:
The correct option is "Triscsuit"
Explanation:
In my opinion the correct option is tricsuit, because it has 0% saturated fat and TRANS fat, which is healthy fats since these fats are the worst for our body.
They also contain sodium but their levels are not high enough to trigger hypertension.
Cl2 + F2 → ClF3, 5. How many moles of Cl2 are needed to react with 3.44 moles of F2? 6. How many grams of ClF3 form when 0.204 moles of F2 react with excess Cl2? 7. How many grams of ClF3 form from 130.0 grams of Cl2 when F2 is in excess? 8. How many grams of F2 are needed to react with 3.50 grams of Cl2?
Answer:
5) 1.147 moles Cl2
6) 12.57 grams ClF3
7) 339.10 grams ClF3
8) 5.63 grams F2
Explanation:
Step 1: Data given
Number of moles F2 = 3.44 moles
Molar mass F2 = 38.00 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles F2
For 1 mol Cl2 we need 3 moles F2 to produce 2 moles ClF3
For 3.44 moles F2 we'll need 3.44/3 = 1.147 moles Cl2
Step 1: Data given
Number of moles F2 = 0.204 moles
Molar mass F2 = 38.00 g/mol
Molar mass ClF3 = 92.448 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles ClF3
For 1 mol Cl2 we need 3 moles F2 to produce 2 moles ClF3
For 0.204 moles F2 we'll have 2/3 * 0.204 = 0.136 moles
Step 4: Calculate mass ClF3
Mass ClF3 = Moles ClF3 * molar mass ClF3
Mass ClF3 = 0.136 moles * 92.448 g/mol
Mass ClF3 = 12.57 grams ClF3
Step 1: Data given
Mass of Cl2 = 130.0 grams
Molar mass F2 = 38.00 g/mol
Molar mass ClF3 = 92.448 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles Cl2
Moles Cl2 = mass Cl2 / molar mass Cl2
Moles Cl2 = 130.0 grams / 70.9 g/mol
Moles Cl2 = 1.834 moles
Step 4: Calculate moles
For 1 mol Cl2 we need 3 moles F2 to produce 2 moles ClF3
For 1.834 moles Cl2 e'll have 2*1.834 = 3.668 moles ClF3
Step 5: Calculate mass ClF3
Mass ClF3 = Moles ClF3 * molar mass ClF3
Mass ClF3 = 3.668 moles * 92.448 g/mol
Mass ClF3 = 339.10 grams ClF3
Step 1: Data given
Mass of Cl2 = 3.50 grams
Molar mass F2 = 38.00 g/mol
Molar mass ClF3 = 92.448 g/mol
Step 2: The balanced equation
Cl2 + 3F2 → 2ClF3
Step 3: Calculate moles Cl2
Moles Cl2 = Mass Cl2 / molar mass Cl2
Moles Cl2 = 3.50 grams / 70.9 g/mol
Moles Cl2 = 0.0494 moles
Step 4: Calculate moles F2
For 1 mol Cl2 we need 3 moles F2
For 0.0494 moles we need 3*0.0494 = 0.1482 moles
Step 5: Calculate mass F2
Mass F2 = moles F2 * molar mass F2
Mass F2 = 0.1482 moles * 38.00 g/mol
Mass F2 = 5.63 grams F2
In which of the following reactions will Kc = Kp? a. 4 NH3(g) + 3 O2(g) ⇌ 2 N2(g) + 6 H2O(g) b. SO3(g) + NO(g) ⇌ SO2(g) + NO2(g) c. 2 N2(g) + O2(g) ⇌ 2 N2O(g) d. 2 SO2(g) + O2(g) ⇌ 2 SO3(g)
Answer:
The correct option is b) SO₃(g) + NO(g) ⇌ SO₂(g) + NO₂(g)
Explanation:
The relation between Kc and Kp is given by the following equation:
[tex]Kp = Kc (RT)^{dn}[/tex]
where R is the gas constant (0,082 L.atm/K.mol), T is the temperature (in K) and dn is the change in moles.
The change in moles (dn) is calculated as:
dn = moles of products - moles reactants
If dn=0, RT= 1 ⇒ Kc=Kp
We calculate dn for each reaction from the estequiometrial coefficients of products and reactants as follows:
a) 4 NH₃(g) + 3 O₂(g) ⇌ 2 N₂(g) + 6 H₂O(g)
dn= (2+6) - (4+3) = 1 ⇒ Kc ≠ Kp
b) SO₃(g) + NO(g) ⇌ SO₂(g) + NO₂(g)
dn = (1+1) - (1+1)= 0 ⇒ Kc = Kp
c) 2 N₂(g) + O₂(g) ⇌ 2 N₂O(g)
dn= 2 - (2+1) = -1 ⇒ Kc ≠ Kp
d) 2 SO₂(g) + O₂(g) ⇌ 2 SO₃(g)
dn = 2 - (2+1) = -1 ⇒ Kc ≠ Kp
The reaction in which Kc=Kp is b), because reactants and products have the same number of moles.
In the presence of a strong base, the following reaction between (CH3)3CCl and OH- occurs: (CH3)3CCl + OH- → (CH3)3COH + Cl- Studies have suggested that the mechanism for the reaction takes place in 2 steps: Step 1) (CH3)3CCl → (CH3)3C+ + Cl- (slow) Step 2) (CH3)3C+ + OH- → (CH3)3COH (fast) What is the rate law expression for the overall reaction? Group of answer choices
Answer:
D. rate = k [(CH3)3CCl]
Explanation:
(CH3)3CCl + OH- → (CH3)3COH + Cl-
The mechanisms are;
Step 1)
(CH3)3CCl → (CH3)3C+ + Cl- (slow)
Step 2)
(CH3)3C+ + OH- → (CH3)3COH (fast)
In kinetics, the slowest step is the ratee determining step.
For a given reaction;
A → B + C, the rate law expression is given as;
rate = k [A]
In this problem, from step 1. The rate expression is;
rate = k [(CH3)3CCl]
Substances like krypton, which is a gas at room temperature and pressure, can often be liquified or solidified only at very low temperatures. At a pressure of 1 atm, does not condense to a liquid until –153.2°C and does not freeze until –157.1°C. What are the equivalent absolute temperatures?
Answer:
The boiling and freezing temperatures of krypton at absolute scale are 119.95 K and 116.05 K, respectively.
Explanation:
The absolute temperature on SI units corresponds to Kelvin scale, whose conversion formula in terms of the Celsius scale is:
[tex]T_{K} = T_{C} + 273.15[/tex]
Where:
[tex]T_{K}[/tex] - Absolute temperature, measured in Kelvins.
[tex]T_{C}[/tex] - Relative temperature, measured in Celsius.
Finally, freezing and boiling temperatures are converted into absolute scale:
Boiling temperature
[tex]T_{K} = (-153.2 + 273.15)\,K[/tex]
[tex]T_{K} = 119.95\,K[/tex]
Freezing temperature
[tex]T_{K} = (-157.1 + 273.15)\,K[/tex]
[tex]T_{K} = 116.05\,K[/tex]
The boiling and freezing temperatures of krypton at absolute scale are 119.95 K and 116.05 K, respectively.
What is an ion?
A. An atom that has lost or gained 1 or more electrons
O B. An atom that has lost or gained 1 or more neutrons
O C. An atom that has lost or gained 1 or more protons
D. An atom that differs in mass from another atom of the same
element
Answer:
An ion is an atom that has lost or gained one or more electrons.
Explanation:
Ions are positively or negatively charged atoms of elements. This is because they can give, take, or share electrons with other elements to encourage the formation of chemical bonds.
Protons are what decide the chemical identity of the element. So, for example, if an atom has 11 protons, we know that will be a Sodium (Na) atom. A loss or gain of protons completely changes the chemical identity of the element and it will then become another element.
Electrons are what give an atom a neutral electrical charge (if that atom has the number of protons and neutrons normally described for the element - otherwise, a discrepancy or gain in neutrons is referred to as an isotope and declares that ions have nothing to do with the mass of an element).
With this information, you can realize that neutrons and protons have nothing to do with ions and you can confirm that ions are atoms that have lost or gained one or more electrons.
A sample of chlorine gas starting at 686 mm Hg is placed under a pressure of 991 mm Hg and reduced to a volume of 507.6 mL. What was the initial volume of the chlorine gas container if the process was performed at constant temperature
Answer:
The initial volume of the chlorine gas [tex]V1=733.28mL[/tex]
Explanation:
Given:
P1= 686mmHg
P2= 991mmHg
V2= 5076mL
V1=?
According to Boyle's law which states that at a constant temperature, the pressure on a gas increases as it's volume decreases.
It can be expressed as : P1V1 = P2V2
Where P1 is the initial pressure
P2= final pressure
V1= initial volume
V2 = final volume
[tex]V1= (P2V2)/P1[/tex]
V1= (991mmHg*507.6mL)/686mmHg
V1=503031.6/686
[tex]V1=733.28mL[/tex]
Therefore, The initial volume of the chlorine gas [tex]V1=733.28mL[/tex]
The number of atoms or molecules whose concentration determine the rate of a reaction is called
A sample of gas occupies a volume of 67.5 mL . As it expands, it does 131.0 J of work on its surroundings at a constant pressure of 783 Torr . What is the final volume of the gas g
Answer:
The final volume [tex]V2=1.3175L[/tex]
Explanation:
between work ( w), pressure ( P ) and volume ( V ) is the following:
w=−PΔV
where,
ΔV=V2−V1
It was stated that the gas is expanding, then the work is done by the system and it is of a negative value .
Note that work, should be expressed in 1L⋅atm=101.3J
CHECK THE ATTACHMENT FOR DETAILED EXPLATION
The partial Lewis structure that follows is for a hydrocarbon molecule. In the full Lewis structure, each carbon atom satisfies the octet rule, and there are no unshared electron pairs in the molecule. The carbon-carbon bonds are labeled 1, 2, and 3.
A) How many hydrogen atoms are in the molecule?
B) Rank the carbon-carbon bonds in order of increasing bond length.
C) Which carbon-carbon bond is the strongest one?
Answer:
A) How many hydrogen atoms are in the molecule?
what type of matter is toluene
Answer:
is an organic chemical conpond
When an automobile engine starts, the metal parts immediately begin to absorb heat released during the combustion of gasoline. How much heat will be absorbed by a 165 kg iron engine block as the temperature rises from 15.7°C to 95.7°C? (The specific heat of iron is 0.489 J/g·°C.)
Answer:
H = 4,034,250 J
Explanation:
Mass, m = 165kg = 165,000g (Converting to grams)
Initial temperature = 15.7°C
Final temperature = 95.7°C
Temperature change, ΔT = 95.7 - 15.7 = 50°C
Specific heat capacity, c = 0.489 J/g·°C
Heat = ?
All the parameters are related with the equation below;
H = m * c * ΔT
H = 165000 * 0.489 * 50
H = 4,034,250 J
The reason for the dramatic decline in the number of measles cases from the 1960s to 2010 in the United States was because the vaccine
Answer:
It was because the vaccine generated actively acquired immunity, that is, inoculation of a portion of the measles virus so that the body forms the antibodies for a second contact and thus can destroy it without triggering the pathology.
Explanation:
Vaccines are methods of active acquired immunity since the antibody is not passively inoculated, it is manufactured by the body with a physiological process once part of the virus is inoculated.
The measles virus most of all affected the lives of infants or newborn children with severe rashes and high fevers that led to death.
A solid is dissolved in a liquid, and over time a solid forms again. How can
you confirm the type of change that took place?
A. Testing the new solid to show that its properties are the same as
the starting solid would confirm that a physical change took
place.
B. The solid dissolving in a liquid is confirmation that a chemical
change took place.
C. The solid forming from the liquid is confirmation that a physical
change took place.
D. Showing that the total mass of the solid and liquid changed would
confirm that a chemical change took place.
Q4. A 0.100 M solution of the weak acid HA was titrated with 0.100 M NaOH.The pH
measured when Vb = ½ Ve was 4.62. Using activity coefficients,calculate pKa.The size of the
A− anion is 450 pm.
An atorn has 9 electrons and 9 protons at the start. If it loses 2 electrons, the net charge on the atom will be. If the atom instead
gains 4 electrons, the net charge will be
Answer:
If it loses 2 electrons, the net charge on the atom will be 2+
If the atom instead gains 4 electrons, the net charge will be 4-
Explanation:
It is based on adding and subtracting charges. Protons are +1 and electrons are -1
If the atom has 9 protons and 9 electrons, the net charge is +9 + (-9) = 0. The +9 is the 9 protons and the -9 is from the 9 electrons.
If two electrons are taken away, there would be 9-2 or 7 electrons with 9 protons. The net charge would then be +9 + (-7) = +2. +9 comes from the 9 electrons and -7 is from the 7 electrons.
So, if two electrons are taken away, the net charge is +2.
Similarly, if the atom gains 4 electrons, there will be 9+4 or 12 electrons and 9 protons. The net charge would then be +9 + (-12) = -4. +9 comes from the 9 protons and -12 comes from the 12 electrons.
So, if 4 electrons are added, the net charge is -4.