Answer:
Free-fall is defined as the movement where the only force acting on an object is the gravitational force.
By the second Newton's law, we have that:
F = m*a
Where F = Force, m = mass, a = acceleration.
We can write this as:
a = F/m
And the gravitational force can be written as:
F = (G*M/r^2)*m
Where G is the gravitational constant, M is the mass of the Earth in this case, and r is the distance between both objects (the center of the Earth and the free-falling object)
As the radius of the Earth is really big, the term inside the parentheses is almost constant in the region of interest, then we can write:
G*M/r^2 ≈ g
And the gravitational force is:
F = g*m
And by the second Newton's law we had:
a = F/m = (g*m)/m = g
a = g
Then the acceleration does not depend on the mass of the object.
Then the thing that is common among the free-falling objects is the vertical acceleration.
A seesaw pivots as shown in below. What is the net torque about the pivot point?
With explanation please
I GIVE 25 POINTS
Answer:
2.3 Nm clockwise
Explanation:
Take counterclockwise to be positive and clockwise to be negative.
∑τ = (3 N) (2.5 m) − (7 N) (1.4 m)
∑τ = 7.5 Nm − 9.8 Nm
∑τ = -2.3 Nm
The net torque is 2.3 Nm clockwise.
How long would it take Jesse with an acceleration of -2.50 m/s^2 to bring his bicycle with an initial velocity of 13.5 m/s to a complete stop?
a.6.1 s
b.3.7 s
c.12.1 s
D.5.4 s
Answer:
use first equation of motion v=u+at..v is 0..since we have to take him to rest and u is 13.5
Explanation:
u = 13.5 m/s
a = - 2.5 m/s^2
v = u + at
0 = 13.5 - 2.5 * t
t (time to reach a complete halt) = 5.4 sec
Willie Swift drives a hockey puck into the goal at a speed of 34.8 m/s. From a distance of 60.0 m, how long will it take to reach the net? I need an explanation of how to get it too so I can study that and understand how you guys are able to get that answer! thank you!
Do geochemists need to have a knowledge of physical science? Explain your
answer. please help:))
Chalk is an ionic compound. Which is a property of all ionic compounds that makes chalk particularly useful for writing on a chalkboard? a high melting point hardness and brittleness inability to dissolve in water a multicolored appearance
The ionic compound property useful for writing on the chalkboard is hardness and brittleness
Information regarding the compound:Chalk should be an ionic compound. If there is hardness and brittleness so it is useful for writing on the chalkboard. But for other reasons like high melting point, dissolving in water does not impact it.
Therefore, the above option should be considered.
Find out more information about the ionic compound here: https://brainly.com/question/9167977?referrer=searchResults
Answer:hardness and brittleness
Explanation: im doing the same thing rn
3. A body has an initial velocity of 4.0m/s. After 6.0s, the velocity is 12.0m/s. Determine the displacement of the body in the 6.0s. (Δs = 0.5(u + v)t
True or false. People from only a few civilizations have contributed to Astronomy.
Answer:
False
Explanation:
Which of these is an example of acceleration? A. A bicyclist turning around the corner B. A car traveling south with its cruise control set C. A bus traveling North at 25 m/s D. A helicopter waiting to take off.
Correct answer is A. A bicyclist turning around the corner
Acceleration can mean a change in direction, speeding up, or slowing down.
B. Is traveling south and doesn’t change direction.
C. Is traveling north and at a constant speed.
D. Is not even moving.
Answer:
A
Explanation:
i took the test and got it right!!
In a science demonstration, a teacher mixed zinc (Zn) with hydrogen chloride (HCl) in a flask and quickly attached a balloon over the mouth of the flask. Bubbles formed in the solution and the balloon inflated.
What most likely occurred during this demonstration?
:The Zn and HCl both retained their identity.
:Either Zn or HCl, but not both, retained its identity.
:Evaporation of one of the substances occurred.
:One or more new substances formed.
Answer:
d
Explanation:
When a teacher mixed zinc (Zn) with hydrogen chloride (HCl), one or more new substances formed. Hence, option (d) is correct.
What is chemical reaction?A chemical reaction is a procedure that causes one group of chemical components to change chemically into another.
Chemical reactions, which can frequently be described by a chemical equation, traditionally include changes that only affect the locations of electrons in the formation and dissolution of chemical bonds between atoms, with no change to the nuclei (no change to the elements present).
The study of chemical processes involving unstable and radioactive elements, where both electronic and nuclear changes may take place, is known as nuclear chemistry.
When the teacher mixed zinc (Zn) with hydrogen chloride (HCl), chemical reaction happens and more than one new substances formed.
2Zn + 2HCl → 2ZnCl + H₂
Learn more about chemical reaction here:
https://brainly.com/question/12276877
#SPJ6
what is 237 seconds converted to meters
Answer:
You can not convert from seconds to meters.
Answer:
yeah you can't convert it
what is independent venerable
Explanation:
About Venerable
Venerable is a privately held company with business operations based in West Chester, Pennsylvania and Des Moines, Iowa. Venerable owns and manages the legacy variable annuity business acquired from Voya Financial, Inc. Created by an investor group led by affiliates of Apollo Global Management, LLC, Crestview Partners, and Reverence Capital Partners, Venerable is an emerging business with well-established, strategic investors, experienced in successfully building and growing insurance businesses with patient, long-term capital.
Explanation:
a variable (often denoted by x ) whose variation does not depend on that of another.
To float in air, a blimp would be filled with helium (true or false)
Which object has the most thermal energy?
A. A 6 kg rock at 15°C
B. A 6 kg rock at 10°C
C. A 10 kg rock at 10°C
D. A 10 kg rock at 15°C
Answer:
D. A 10 kg rock at 15°C
Explanation:
Thermal energy is heat energy, meaning that the hotter rocks will have more energy.
The heavier/larger rocks can store more energy.
So if we combine the largest two variables, we get a 10kg rock at 15°C.
Answer: D
Explanation:
Please help me its physics and i need help
1: About 63% of this electricity generation was from fossil fuels
B: The demand for electricity varies throughout the day. When the demand for electricity is greater than the base load, the National Grid reacts by providing additional electricity. ... Hydroelectric power stations have a very short start-up time and are used to provide additional electricity at peak times.
Steve is recording the temperature of an object on Celsius and Fahrenheit scales. Relationship between the two scales is given by F = 1.8 ⋅ C. Steve will plot the Celsius readings along the y-axis and the Fahrenheit readings along the x-axis. (5 points) True False
Answer:
False
Explanation:
since the Farenheit depends on the amount of Celsius times (*) 1.8 (F= 1.8 * C),
then we can deduce that Farenheit is the dependent variable while celsius is independent. after this, remember that the independent variable is the X value and the dependent variable is the Y value.
PLZZ ANSWER THE QUESTION
Answer:
a
Explanation:
Calculate the volume of this regular solid. A cone 4.5 centimeters high with a radius of 3 centimeters. Label B is pointing to the circular base of the cone.
Answer:42.41
Explanation:
What is the momentum of A 200 kg shark swimming at 15 m/s
Answer:
3000 kg meter per sec
Explanation:
Momentum of an object refers the motion of an object. Momentum depends upon mass and velocity both.
Formula to calculate the momentum of any object is,
Momentum = Mass × Velocity
By substituting values of mass and velocity of the shark from the question,
Momentum of shark = 200 × 15
= 3000 kg meter per second
Therefore, shark weighing 200 kg has the momentum as 3000 kg meter per seconds.
Irene was investigating the behavior of gases at certain conditions. Which would most likely cause an increase in the rate of collisions between gas molecules in a container?
Answer:
Increase in temperature
Increase in pressure
Explanation:
For the rate of collisions to increase, It can happen in various ways
1. The gasses can be made to move faster: This can be done by increasing their temperature. An increase in the temperature of the gases directly relates to a corresponding increase in their kinetic energy. This means that the molecules of the gases can move with a greater velocity, which will increase collision rates.
2. The volume of the container can be reduced: Consider this; If the container is made smaller, the molecules of the gases will have less space to move about. This means that they will be bumping into the walls of the container more frequently. This reduction in volume leads to an increase in the pressure of the gas. This is exactly what happens in a piston-cylinder assembly
The increase in the rate of collisions between gas molecules in a container should result in Increase in temperature and Increase in pressure
Reasons for increasing the rate of collisions:1. In the case when the gasses should be quick faster, due to this, the temperature should be increased. In this, the gases molecules should be moved have high velocity
2, Here the container volume should be decreased. Due to this, the volume should be decreased that results in the increment of the gas pressure.
Therefore, The increase in the rate of collisions between gas molecules in a container should result in Increase in temperature and Increase in pressure
Learn more about gases here: https://brainly.com/question/24862829
Convert 1.2m = ____mm
Answer:
1.2m = 1200 mm
Explanation:
The answer is looks easy, but 1 Meter (m) is equal to 1000 millimeters (mm). To convert meters to mm, multiply the meter value by 1000.
A car accelerates at 3 m/s*2. Assuming the car starts from rest, how much time does it need to
accelerate to a speed of 12 m/s?
3 sec
2 sec
4 sec
12 sec
None of the other answers
Acceleration,a = 3 m/s²
Initial velocity,u = 0 m/s
Final velocity,v = 12 m/s
To be calculated:-Calculate the time take by a car.
Solution:-According to the first equation of motion:
v = u + at
★ Substituting the values in the above formula,we get:
⇒ 12 = 0 + 3 × t
⇒ 12 = 3t
⇒ 3t = 12
⇒ t = 12/3
⇒ t = 4 sec
We are given with some parameters used in Kinematics for determining the motion of an object.
Accleration = 3 m/s²Started from rest (Initial vel.) = 0 m/sFinal velocity = 12 m/sWe have to find the time taken by the car to attain the final velocity with the given accleration. By using 1st equation of motion which says:
v = u + atFinal velocity = Initial velocity + Accl. × Time taken
Plugging the values,
➝ 12 = 0 + 3(t)
➝ 3t = 12
➝ t = 4 s
So, the correct answer is Option C. And we are done...
Carry On Learning [tex]![/tex]
What is meant by the term work done?
List the planets that have a diameter of less than 15,000 km.
Answer:
Hey!
Your list goes like this!
MERCURY-- 4,879 km
VENUS-- 12,104 km
EARTH-- 12,756 km
MARS-- 6,779 km
Explanation:
You could add Pluto but it depends as its now called a DWARF PLANET
I HOPE THIS HELPS!!
Why does a green leaf look green in our eyes
Answer:
because the leaf absorbs all the other colors except for green. So the leaf reflects the green color which is what we see. that is why a leaf spears to be green.
Explanation:
floor gang aooh sub to pewdiepie
An object has a mass of 17 kg and a speed of 1.28 m/s. What is the object's
kinetic energy?
Your answer
Answer: 13.9264J
Explanation: the formula for kinetic energy is ½ mv² so, we need to add our figures to the formula: ½ (17×1.28²) = 13.9264 J.
Need help! Photo says all! Will mark brainliest :)
Answer:
C-D
Explanation:
As you can see from the graph, the distance from A to B was from 0 m to 6 m in a duration of 3 seconds.
Divide 6 meters by 3 seconds to find the speed:
6 ÷ 3 = 2 m/s
B-C is not moving due to a straight line as said in the graph, so speed is
0 m/s.
There is also C-D since the car traveled from a distance of 9 meters
(6 -(-3) = 9) in 3 seconds too. (NOTE: The graph line going down does not mean it is slowing down, but rather going to a certain distance like going backwards)
Divide 9 meters by 3 seconds to get the speed:
9 ÷ 3 = 3 m/s
Between A-B, B-C, and C-D, C-D has the fastest speed recorded with 3 m/s.
A-D does not count here as the line has no connection between point A and point D.
Cheers!
What is energy?
A.a push or pull
B. A change in the position of an object
C. The ability to cause change in matter
D. Anything that takes up space and has mass
What is the mass of a person that weighs 500 N on earth?
Answer:
M=51kg
Explanation:
Weight= Mass x Gravitational Acceleration
500N= M x 9.8 m/s^2
M= 51 kg
Ten Seconds after starting from rest, a car moving at 40 m/s what is the cars average acceleration
Answer:
[tex]4ms {}^{ - 2} [/tex]
Explanation:
We can use equation of motion to solve this
[tex]v = u + at \\ 40 = 0 + a(10) \\ a = 4m {s}^{ - 2} [/tex]
What is measurement
This is the assignment of a number to a characteristic of an object or event, which can be compared with other objects or events.