Answer:
Pneumatics use easily compressible gas like air or pure gas. Meanwhile, hydraulics utilize relatively-incompressible liquid media like mineral oil, ethylene glycol, water, synthetic types, or high-temperature fire-resistant fluids to make power transmission possible.
Explanation:
hope this helps
You have a 100 ohm resistor. How
much resistance must you add in
parallel to the 100 ohm resistor to
create an equivalent resistance of
75.0 ohms?
Answer:
R2 = 300 Ohms
Explanation:
Let the two resistors be R1 and R2 respectively.
RT is the total equivalent resistance.
Given the following data;
R1 = 100 Ohms
RT = 75 Ohms
To find R2;
Mathematically, the total equivalent resistance of resistors connected in parallel is given by the formula;
[tex] RT = \frac {R1*R2}{R1 + R2} [/tex]
Substituting into the formula, we have;
[tex] 75 = \frac {100*R2}{100 + R2} [/tex]
Cross-multiplying, we have;
75 * (100 + R2) = 100R2
7500 + 75R2 = 100R2
7500 = 100R2 - 75R2
7500 = 25R2
R2 = 7500/25
R2 = 300 Ohms
All students except one are cheating on a test. The one student who is not cheating on the test is exhibiting abnormal behavior. Based on the information provided in the article, explain the conclusion of this scenario. Which definition for abnormal behavior would apply to this scenario? (Site 1)
Answer: See explanation
Explanation:
According to clinical psychology, an abnormal behavior is when an act results in a significant distress and is deviant from the normal practice.
In this case, while the whole class is cheating, one student isn't. This shows that the student is deviating from what every other person is doing. Since the student deviates from the norm, it's an abnormal behavior.
Answer:
The reason he might be exhibiting abnormal behavior is the fact that everyone except him is cheating on a test. He is the odd one out and due to this he might be anxious/nervous. Perhaps he thinks that since he is the only one not cheating that he might get a bad grade cause the teacher will assume he is cheating aswell. Another might be that he does not like being singled out. It's out of the norm and he does not particularly like it.
Explanation:
Take this and alter it to your liking. It got me a 100%!
c A flea jumps off the dog and changes its speed by
1.2 m/s in a time of 0.8 milliseconds. Calculate its
acceleration. (1 ms = 10-²5)
d Compare the kinetic energy of the dog and the flea.
9) An object with a height of 18 cm is placed in front of a converging lens. The image has a
height of –9.0 cm.
a) What is the magnification of the lens?
b) If the focal length of the lens is 6.0 cm, how far in front of the lens is the object?
c) Where does the image appear?
Answer:
Explanation:
a) Magnification = image height / object height = -9 / 18 = -0.5
b) Magnification = - image distance / object distance = -0.5
so image distance = 0.5 object distance
1/focal length = 1/image distance + 1/object distance
1/6 = 1/(0.5 object distance) + 1/object distance
object distance = 18.0 cm
c) Image appears behind the lens.
Answer:
Explanation:
mag = ht i/ht o = -9/18 = -1/2
mag = -1/2 = -di/do
do = 2di
put in eqn
1/f = 1/di + 1/do
1/6 = 1/di + 1/2di
2di = 18
do = 18cm
image is behind lens
what is 7/3 because it wont work for me pls help
Answer:
7/3 = 2 1/3
Explanation:
If the numerator is greater than or equal to the denominator of a fraction, then it is called an improper fraction. In that case, you could convert it into a whole number or mixed number fraction. 7/3 = 2 1/3.
Answer:
2.3333 (3-repeating) hope that helps
what is wheel and axle?
Answer:
Wheel and axle consists of two coaxial cylinders of different diameters. Various examples of wheel and axle are used in our daily life. Some examples of such wheel and axles are string-roller, screwdriver, MADANI, ROTE PING, spanners, knobs of a door, steering of vehicles etc. Most of them are used for magnifying effort but some are also used to gain speed like MADANI and ROTE PING. In wheel and axles, usually effort is applied on big cylinder called wheel and is overcome bya small cylinder called axle.
Answer:
Explanation: The wheel and axle
a machine consisting of a wheel attached to a smaller axle so that these two parts rotate together in which a force is transferred from one to the other.
The application of a force that causes an object to move in the direction of the force is ______.
Power
Work
Kinetic energy
Distance
Answer:
work is the answer because work is said to be done if an object is displaced by the application of force
Do you think the mass of an object greatly affects the coefficient of friction?
Answer:
no it doesn't
Explanation:
In order to determine the speed of an object, what measurements must be made?
Answer:
You need to have the distance traveled and the time it took to travel that distance.
Explanation:
PLEASE ANSWER THIS ASAP THIS IS A SCIENCE QUESTION NO LINKS
Answer:
I believe the answer would be kinetic energy to thermal energy.
Explanation:
Thermal energy is the heat of the brakes, and the kinetic energy would be when the car is in motion before stopping.
The bending of light as it travels from one medium into another is called
Question 15 options:
none of the above.
reflection.
diffraction.
refraction.
Answer:
Refraction is the correct option
Answer: refraction
Explanation: it is the bending of light rays as it moves from one medium to another.
Ella had a beaker of warm water Its temperature was 70 degrees celsius She poured in some water and stirred the mixture. When she measured the temperature of the water, it had fallen to 40 degree celsius
Explain why the temperature of the water decreased when the cold water was added to it
[tex] \mathfrak{\huge{ \mathfrak{ \underline{ Answer }}}\: ✓ }[/tex]
We know, hot water has more energy than the cold water , so when cold water is added in the beaker then heat transfer occurs from hot water to cold water to balance the Energy, causing the drop of temperature from 70° C to 40° C.
Note : Heat transfers occurs from hotter object to cooler one.
_____________________________
[tex] \mathrm{ \#TeeNForeveR}[/tex]
could sum1 explain this for 17 points please?
Answer:
If the potential energy change of each cart is the same, then the total mechanical energy change is the same for each cart
Explanation:
Hills look steeper when standing back from the edge so that gaze is nearly parallel to the surface of the hill. When optical slant (the angle between the center of gaze and the surface) is small, surface orientation is pulled toward the direction of gaze
helpppppppppppp.......!
Explanation:
m = 66 kg
a = 2 m/s²
F = .....?
F = m . a= 66 . 2
= 132 N
#CMIIWWhich statement best describes particles that are affected by the strong
force?
A. Particles that make up an atom
B. Particles in an atom that are neutral
C. Particles that make up nucleus
D. Particles in an atom that have a charge
Answer:
C. Particles that make up a nucleus
Explanation:
A P E X
Improving your cardiovascular endurance, such as aerobic activity, can get your heart pumping, make you sweaty, and quicken your breathing. When you give your heart this kind of workout on a regular basis, your heart will get even better at its main job - delivering ____________ to all parts of your body.
Answer:
The correct answer is - oxygen.
Explanation:
Cardiovascular endurance is the ability to do physical activity or exercise without affecting or being tired for a longer time period. Aerobic exercise or activity can help to increase cardiovascular endurance.
Improving the cardiovascular system helps in delivering oxygen as per the demands with the help of the heart that pumps the oxygen-rich blood to different organs of an individual and lungs by inhaling enough oxygen.
how does a culture
of a community influence the life style of people.
plz answer with a nice explanation
I will give u like and follow u and also give u branist ok plz help
Plisssss you can help me pliss
does a parallel circuit with 2 resistors have more resistance than a series circuit with 2 resistors
That depends on the values of the resistors.
If the same two resistors are used in both cases, then the total resistance is more in series and less in parallel.
Here's a catchy little factoid for ya:
-- In series, the total resistance is more than the biggest single one.
-- In parallel, the total resistance is less than the smallest single one.
Protective equipment and protective measures help keep all types of workers safe on the job.
true or false?
Fill in the blank: Friction applies to all states of matter in the gas state it is called ________ resistance and in a liquid it's called ___________ resistance. Air resistance can be used to slow the fall of an object. Parachutes are usually made out of light, strong fabric, originally silk, now most commonly nylon. They are typically dome-shaped, but vary, with rectangles, inverted domes, and others found
Answer:
Drag; water.
Explanation:
Friction can be defined as a force that resists the relative motion of two objects when there surface comes in contact. Thus, it prevents two surface from easily sliding over or slipping across one another. Also, friction usually reduces the efficiency and mechanical advantage of machines but can be reduced through lubrication.
Generally, there are four (4) main types of friction and these includes;
I. Static friction.
II. Rolling friction.
III. Sliding friction.
IV. Fluid friction.
Fluid friction can be defined as a type of friction that acts on physical objects moving through a liquid or gas. A fluid refers to any physical substance that can flow and is able to take the shape of a container.
In science, matter can be defined as anything that has mass and occupies space. Any physical object that is found on earth is typically composed of matter. Matter are known to be made up of atoms and as a result has the property of existing in states.
Basically, matter exists in three (3) distinct or classical phases and these are; solid, liquid and gas.
Generally, friction applies to all states of matter; in the gaseous state, it is called drag resistance and in a liquid it's called water resistance.
Atoms in group 18 are inert (chemicalally unreactive) because
Answer:
They have a full shell of valence electrons and are very stable .
Explanation:
Answer
atoms in group 18 are chemically inert because they are stable and do not take part in any chemical reaction.
Explanation:
Electromagnetic waves are transverse waves. They consist of traveling electric and magnetic fields which oscillate periodically. What angle does the electric field make with the magnetic field in an electromagnetic wave?
A.) 30
B.) 45
C.) 60
D.) 90
Answer:
The answer is D.) 90
Explanation:
the electromagnetic wave is a transverse wave. the electric field makes an angle of 90° with the magnetic field. both these fields, in turn, make an angle of 90° with the direction of movement of the wave.
A couple is sitting side-by-side. By what factor should the distance between them be changed by if the attractive force is to be halved?
Answer:
the distance should be changed by a factor of √2
Explanation:
The attractive force between the couples can be given by Newton's Law of Gravitation:
[tex]F =\frac{Gm_1m_2}{r^2}[/tex]
where,
F = Attractive Force
G = Universal Gravitational Constant
m₁ = mass of the first person
m₂ = mass of the second person
r = distance between them
Now, if we want to halve the force without changing masses, hen:
[tex]F' = \frac{1}{2} F = \frac{1}{2} \frac{Gm_1m_2}{r^2}\\\\F' = \frac{1}{2} F = \frac{Gm_1m_2}{(\sqrt{2}r)^2}[/tex]
Hence, it is clear that the distance should be changed by a factor of √2
[tex] \bigstar[/tex] A uniform resistance wire is stretched till it's length becomes four times.What happens to the resistance ?
*Plagiarised / Irrelevant answers will be reported!
Answer:
if a uniform resistance wire is stretched till it's length becomes four times the the resistance of wire multiples by sixteen times as resistance is directly proportional to the
length of wire.
hope it helps.
stay safe healthy and happyAnswer:
we have:
At unit length
Resistance [R]=[tex] \frac{pL}{A} [/tex].....i
where
p: resistivity
L:length
A:area
when
length is strength 4 times
length will be 4L
Now
new equation becomes
Resistance[R] =[tex] \frac{p4L}{A} [/tex]=4[tex] \frac{pL}{A} [/tex]=4R
so
when A uniform resistance wire is stretched till it's length becomes four times. the resistance increases by four times of its original resistance.
Highway safety engineers want to design roadside barriers that will crumple
in the event that a car drives off the road and collides with them, slowing
down the car more gradually. The average person has a mass of 68 kg and
travels on a highway at a velocity of 27 m/s. If the engineers know that the
maximum force that a person can safely withstand is 2180 N, approximately
how much time is required to crumple the barrier to safely slow the person
with this force?
Answer:
[tex]0.84\:\text{s}[/tex]
Explanation:
The impulse-momentum theorem states that the impulse on an object ([tex]F\Delta t[/tex]) is equal to the change in momentum of that object ([tex]\Delta p[/tex]).
Set up the following equation:
[tex]F\Delta t=\Delta p[/tex]
Solving for change in momentum:
The momentum of an object is equal to [tex]p=mv[/tex], where [tex]m[/tex] is the mass of the object and [tex]v[/tex] is the velocity of the object. Since the person's final velocity will be zero, their final momentum will also be zero. Therefore, the person's change in momentum is [tex]68\cdot 27-0=1836\:\text{kgm/s}[/tex].
Solving for time:
[tex]2180\cdot\Delta t = 1836,\\\Delta t =\frac{1836}{2180},\\\Delta t =\boxed{0.84\:\text{s}}[/tex]
Answer:
If the engineers know that the
If the engineers know that themaximum force that a person can safely withstand is 2180 N, approximately, 0.84 second is required to crumple the barrier to safely slow the person
is required to crumple the barrier to safely slow the personwith this force.
Please help ..... 10 points .....
Answer:
D. elliptical galaxy
Explanation:
Hope this helps :)
(PLEASE HELP !! )Does the chemical equation follow the Law of Conservation Of Matter?
A. No
B. Yes
Please explain to.
Answer: No
The Law of Conservation infers that the matter within a system will perserve its quantity (less there's an outside factor which disrupts the system). There should be more Cl within the products side of the equation, and more Br within the reactants side (there should be general adjustment to make this problem balanced), so that the matter is equal in quantity within both sides of the equation.
I really need help with this question
Calcular la cantidad de solucion que se encuentra en un recipiente con 670 g de solvente y 22 g de soluto
Answer:
692 g
Explanation:
La fórmula para encontrar la solución de una mezcla química es agregar el soluto y el solvente juntos. Esto significa
Solución = solvente + soluto
Solución = 670 g + 22 g
Solución = 692 g
es así de simple, y espero que lo entiendas