Answer:
You can rip it, cut out a shape, paint or color on it, or fold it in different ways. The paper might look different, but it is still paper.
Explanation:
what is its molar concentration?
Answer:
The correct answer is - the number of moles of solute per liter of solution.
Explanation:
The molar concentration is also known as molarity which is the amount of concentration of a solute is in a chemical solution is the number of moles of solute per unit volume of solution. It is represented as M and can be calculated by:
M = n/v
Where n is the number of moles of the solute and,
v is the volume of solution (in liters normally)
It is worldwide used measurment for the concentration.
Some areas of the world are experiencing more desert-like conditions. This
change most favors survival of species with the ability to do which of the following?
How many moles of "02" are in a 192g sample of O2? *
1
2
3
4
5
6
7
Answer: The number of moles of [tex]O_2[/tex] are 6.
Explanation:
According to avogadro's law, 1 mole of every substance occupies 22.4 L at STP and contains avogadro's number [tex]6.023\times 10^{23}[/tex] of particles.
To calculate the moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text {Molar mass}}[/tex]
Given mass = 192 g
Molar mass = 32 g/mol
[tex]\text{Number of moles}=\frac{192g}{32g/mol}=6mol[/tex]
The number of moles of [tex]O_2[/tex] are 6.
9. The times of first sprinkler activation (in seconds) for a series of tests of fire-prevention sprinkler systems that use aqueous film-forming foam is as follows. The system has been designed so that the true average activation time is supposed to be at most 25 seconds. Does the data indicate the design specifications have not been met
This question is incomplete, the complete question is;
The times of first sprinkler activation (in seconds) for a series of tests of fire-prevention sprinkler systems that use aqueous film-forming foam is as follows; 27 41 22 27 23 35 30 33 24 27 28 22 24
( see " use of AFFF in sprinkler systems," Fire technology, 1975: 5)
The system has been designed so that the true average activation time is supposed to be at most 25 seconds.
Does the data indicate the design specifications have not been met?
Test the relevant hypothesis at significance level 0.05 using the P-value approach
Answer:
since p-value (0.042299) is lesser than the level of significance ( 0.05)
We Reject Null Hypothesis
Hence, There is no sufficient evidence that the true average activation time is at most 25 seconds
Explanation:
Given the data in the question;
lets consider Null and Alternative hypothesis;
Null hypothesis H₀ : There is sufficient evidence that the true average activation time is at most 25 seconds
Alternative hypothesis H₁ : There is no sufficient evidence that the true average activation time is at most 25 seconds
i.e
Null hypothesis H₀ : μ ≤ 25
Alternative hypothesis H₁ : μ > 25
level of significance σ = 0.05
first we determine the sample mean;
[tex]x^{bar}[/tex] = [tex]\frac{1}{n}[/tex]∑[tex]x_{i}[/tex]
where n is sample size and ∑[tex]x_{i}[/tex] is summation of all the sample;
= [tex]\frac{1}{13}[/tex]( 27 + 41 + 22 + 27 + 23 + 35 + 30 + 33 + 24 + 27 + 28 + 22 + 24 )
= [tex]\frac{1}{13}[/tex]( 363
sample mean [tex]x^{bar}[/tex] = 27.9231
next we find the standard deviation
s = √( [tex]\frac{1}{n-1}[/tex]∑([tex]x_{i}-x^{bar}[/tex])²
x ([tex]x_{i}-x^{bar}[/tex]) ([tex]x_{i}-x^{bar}[/tex])²
27 -0.9231 0.8521
41 13.0769 171.0053
22 -5.9231 35.0831
27 -0.9231 0.8521
23 -4.9231 24.2369
35 7.0769 50.0825
30 2.0769 4.3135
33 5.0769 25.7749
24 -3.9231 15.3907
27 -0.9231 0.8521
28 0.0769 0.0059
22 -5.9231 35.0831
24 -3.9231 15.3907
sum 378.9229
so ∑([tex]x_{i}-x^{bar}[/tex])² = 378.9229
∴
s = √( [tex]\frac{1}{13-1}[/tex] ×378.9229 )
s = √31.5769
standard deviation s = 5.6193
now, the Test statistics
t = ( [tex]x^{bar}[/tex] - μ ) / [tex]\frac{s}{\sqrt{n} }[/tex]
we substitute
t = ( 27.9231 - 25 ) / [tex]\frac{5.6193}{\sqrt{13} }[/tex]
t = 2.9231 / 1.5585
t = 1.88
now degree of freedom df = n - 1 = 13 - 1 = 12
next we calculate p-value
p-value = 0.042299 ( using Execl's ( = TDIST(1.88,12,1)))
Here x=1.88, df=12, one tail
now we compare the p-value with the level of significance
since p-value (0.042299) is lesser than the level of significance ( 0.05)
We Reject Null Hypothesis
Hence, There is no sufficient evidence that the true average activation time is at most 25 seconds
Early chemists, known at the time as alchemists, had a difficult time understanding the Law of Conservation of Mass. Using the burning of wood as an example, what property of matter made this law difficult for early scientists to understand?
The law of conservation of mass states that, for any isolated system, the mass can neither be created nor be destroyed
After burning a log, the remains that are left behind after it burns are lesser than what would initially seem. There is a difference in mass before the burning of the log after the burning of the log. This seems like a violation of the law of conservation of mass, which would have made it difficult for early chemists to understand it. But if we consider the surroundings as a system then we can see that the mass that is lost in burning is actually converted into smoke and energy or forming other forms of substances. Then considering the whole system we can see that the mass and energy are conserved and interrelated.learn more about conservation of mass and energy:
https://brainly.com/question/13971039
What two methods are used for determining the age of rocks and fossils?
Relative and Absolute Dating
Carbon and Water Dating
Absolute and Resolute Dating
Relative and Absent Dating
Explanation:
first one because absolute dating is a thing for rock layers
what is arcenic? Who can tell me!
Explanation:
Arsenic is a solid chemical element that is used especially in wood preservatives, alloys, and semiconductors and is extremely toxic in both pure and combined forms.
A poisonous trioxide As2O3 or As4O6 of arsenic is used especially as an insecticide or weed killer.
How is the waste in your body similar to the waste in your home or community
Answer:
Your body naturally gets rid of its waste and in your community/home also has sewers and gutters to also get rid of waste.
DIRECTION: Supply the missing information about the scientist listed in the graphic
organizer.
HELP ME PLEASSEEEE
I'll give you brainliest I promise
Answer:
The missing information or their role in the discovery of the cell is as follows:
Robert Hooke: He was the first scientist to called cells to tiny box-like cavities he saw in cork and illustrated as cells.
A. Leeuwenhoek: he was a microscopist and microbiologist who used microscopes and observed many other living cells. He called animalcules to these single-cell living organisms later used to prove that cells are the fundamental unit of life.
Schwann and Schleiden: They presented the theory that suggested that the cells are basic building blocks of all living things.
Virchow: He observed that the cell dividing and come from pre-existing cells.
Four grams of copper chloride on analysis was found to contain 1.89 of copper and 2.11 g of chlorine what is the percentage of copper in the compound
Answer:
Türkçesini yazarmısın
Which of the following materials will conduct electricity well?
A. Cotton jeans
B. Glass
C. Metal paper clips
D. Rubber eraser
Answer:
Metal paper clips hope it helps
A Review Constants Periodic Table
PAC name for each of the following
ant to reference (Pages 460 - 463)
5 while completing this problem
Spell out the full name of the compound.
Submit
Request Answer
Part D
CI
CI
Spell out the full name of the compound.
Pearson
Answer:
C. 1, 4–dimethyl–1–cyclohexene
D. 4, 6–dichloro–1–heptene
Explanation:
C. Determination of the name of the compound.
To name the compound given above we must observe the following:
1. Determine the functional group of the compound. In this case, the functional group is the double bond (–C=C–).
2. Determine the parent name by counting the number of carbon that makes up the ring. In this case, 6 carbon makes up the ring. Hence the parent name is cyclohexene.
3. Identify the substituent group attached to the compound. In this case, two methyl group i.e –CH₃ are attached.
4. Locate the position of the substituent group attached by giving the functional group the lowest possible count. In this case, the functional group is at carbon 1, the first methyl group is at carbon 1 and the 2nd methyl group is at carbon 4.
5. Combine the above to obtain the name. Thus, the name of the compound is:
1, 4–dimethyl–1–cyclohexene.
D. Determination of the name of the compound.
To name the compound given above we must observe the following:
1. Determine the functional group of the compound. In this case, the functional group is the double bond (–C=C–).
2. Determine the parent name by counting the number of carbon that makes up the chain. In this case, 7 carbons makes up the chain. Hence, the parent name of the compound is heptene.
3. Identify the substituent group attached to the compound. In this case, two chlorine (Chloro) i.e –Cl are attached.
4. Locate the position of the substituent group attached by giving the functional group the lowest possible count. In this case, the functional group is at carbon 1, the first chlorine is at carbon 4 and the 2nd is at carbon 6.
5. Combine the above to obtain the name. Thus, the name of the compound is:
4, 6–dichloro–1–heptene
Ionic compounds form between two metals true
Answer (TL;DR):
False, ionic compounds form between a metal and a nonmetal. This is because metals are looking to lose electrons to get a full outer shell while nonmetals are looking to gain electrons to get a full outer shell.
Explanation:
Atoms have a full outer shell when their outermost shell holds the maximum number of electrons. For example, if the outermost shell is the first shell of the atom, it can hold up to 2 atoms. When this shell holds 2 atoms, it is considered full. If the outermost shell is the second shell of the atom, it can hold up to 8 atoms. When this shell holds 8 atoms, it is considered full. This can also be referred to as an atom "gaining a complete octet." The reason that atoms want a complete octet is to become stable and less reactive.
Let's say an atom with 3 shells has only 1 electron on the third shell. It doesn't have a complete octet and it wants to gain one. The third shell can hold up to 8 electrons. So, to gain a complete octet, the atom can either gain 7 electrons or just lose the 1 that it already has, which is the easier option. This is the case with metals and the opposite goes for nonmetals.
Because metals want to lose electrons and nonmetals want to gain electrons, they form compounds with each other.
I hope this helps!
Round off the following measurements to two significant figures. Write the answers in scientific notation. a. 6310 m b. 125.00 Kg c. 6906 km d. 0.0828 m
need steps and formela
Explanation:
a. 6310 m
Two significant numbers means it must have only 2 digits. The first two digits are 6 and 3. The next number 1 is not up to 5 hence it would be round off to zero.
Two s.f = 6300
Converting it to scientific notation means it must be expressed by a number between 1 and 10, multiplied by a power of 10.
6.3 x 10^3
b. 125.00 Kg
Two significant numbers means it must have only 2 digits. The first two digits are 1 and 2. The next number 5 is up to 5 hence it would be round up to one.
Two s.f = 130.00
Converting it to scientific notation means it must be expressed by a number between 1 and 10, multiplied by a power of 10.
Scientific notation = 1.3 x 10^2
c. 6906 km
Two significant numbers means it must have only 2 digits. The first two digits are 6 and 9. The next number 0 is not up to 5 hence it would be round up to zero.
Two s.f = 6900
Converting it to scientific notation means it must be expressed by a number between 1 and 10, multiplied by a power of 10.
Scientific notation = 6.9 x 10^3
d. 0.0828 m
Two significant numbers means it must have only 2 digits. The first two digits(excluding zero) are 8 and 2 . The next number 8 is up to 5 hence it would be round up to one.
Two s.f = 0.083
Converting it to scientific notation means it must be expressed by a number between 1 and 10, multiplied by a power of 10.
Scientific notation = 8.3 x 10^-2
An unknown compound contains only C , H , and O . Combustion of 5.90 g of this compound produced 11.8 g CO2 and 4.83 g H2O . What is the empirical formula of the unknown compound
Answer:
C₂H₄O
Explanation:
In a compound that contains Cabon, hydrogen and oxygen, the combustion produce CO₂ from the carbon, and H₂O from the hydrogens. Using the mass of the products we can solve the moles of Carbon and hydrogen. The empirical formula is the simplest whole-number of atoms present in a molecule.
Moles CO₂ = Moles C:
11.8g CO₂ * (1mol / 44g) = 0.268 moles CO₂ = 0.268 moles C * (12g/mol) =
3.216g C
Moles H₂O = 1/2 moles H:
4.83g H₂O * (1mol / 18g) = 0.268 moles H₂O * (2 mol H / 1 mol H₂O) =
0.537 mol H * (1g/mol) = 0.537g H
Mass O to find moles O:
5.90g Sample - 3.216g C - 0.537g H = 2.147g O * (1mol / 16g) = 0.134 moles O
Ratio of atoms -Dividing in 0.134 moles-:
C = 0.268mol C / 0.134 mol O = 2
H = 0.537mol H / 0.134 mol O = 4
O = 0.134mol O / 0.134 mol O = 1
Empirical formula is:
C₂H₄OA can of butane with a pressure of 2 atm at 283k has its pressure increased to a new pressure of 5 atm. What is the temperature of the new container?
Answer:
New temperature T2 = 707.5 K (Approx.)
Explanation:
Given:
Old pressure P1 = 2 atm
Old temperature T1 = 283 K
New Pressure P2 = 5 atm
Find:
New temperature T2
Computation:
Using Gay-Lussac law;
P1 / T1 = P2 / T2
So,
2 / 283 = 5 / T2
New temperature T2 = 707.5 K (Approx.)
15 points AND BRAINLIEST!!
At what Celsius temperature will Neon have a mass of 0.02 kg and a pressure of 6.43 atm in 2.5 L
container
Answer:
[tex]T=-75.59\°C[/tex]
Explanation:
Hello!
In this case, since we can treat neon as an ideal gas, it is possible for us to use the following equation:
[tex]PV=nRT[/tex]
Whereas the temperature is out unknown, so we proceed as follows:
[tex]T=\frac{PV}{nR}[/tex]
However, we need the moles of neon in 0.02 kg as shown below:
[tex]n=0.02kg*\frac{1000g}{1kg}*\frac{1mol}{20.17g} =0.992mol[/tex]
Thus, we obtain the following temperature in Kelvins:
[tex]T=\frac{6.43atm*2.5L}{0.992mol*0.08206\frac{atm*L}{mol*K}} \\\\T=197.56K[/tex]
Therefore, in degree Celsius it is:
[tex]T=197.56-273.15\\\\T=-75.59\°C[/tex]
Best regards!
Type your answer in the box.
The particles in both liquids and __________
particles in
are in direct contact with each other, while the
are particles in ________ are separated from each other by relatively large distances.
Answer:
1)Solid
2)A gas
Explanation:
solids is in a fixed position with direct contact
Gas are seperate and free with its movement.
The particles in both liquids and solid particles in are in direct contact with each other, while the are particles in a gas are separated from each other by relatively large distances.
What are the properties of particle ?A particle can be defined as total mass occupy in space, all the physical structures are composed of particles, can be present in three basic states such as solid, liquid, and gaseous state.
The atoms are basic unit of matter and that make up the objects which can be visible and touched every day, the amount of matter in an object can be determined by its mass.
A physical property of the particle is not depend of its chemical composition such as Density, color, hardness, melting and boiling points, and electrical conductivity.
Some characteristics of particle like density, color, mass, volume, length, malleability, melting point, hardness, odor, temperature.
Learn more about properties of particle , here:
brainly.com/question/28200017
#SPJ2
How many grams are in 10.0 mol of Chromium?
Answer:
51.9961 grams
Explanation:
You can view more details on each measurement unit: molecular weight of Chromium or grams The molecular formula for Chromium is Cr. The SI base unit for amount of substance is the mole. 1 mole is equal to 1 moles Chromium, or 51.9961 grams.
Hydrogen gas has a density of 0.09 , and at normal pressure and 1.01 one mole of it takes up 22.4. How would you calculate the moles in 770 of hydrogen gas?
Answer : The moles of hydrogen gas will be, 201.9 moles
Solution :
First we have to calculate the molar mass of hydrogen gas.
using ideal gas equation,
where,
n = number of moles of gas
w = mass of gas
P = pressure of the gas = 1 atm
T = temperature of the gas =
M = molar mass of hydrogen gas = ?
R = gas constant = 0.0821 Latm/moleK
D = density of gas = 0.090 g/L
Now put all the given values in the above equation, we get the molar mass of hydrogen gas.
Now we have to calculate the moles of hydrogen gas.
Therefore, the moles of hydrogen gas is, 201.9 moles
Equipment used for solar energy is usually not expensive.
True False
Answer:
False, hope this helps!
Explanation:
1. Hydrogen, Helium, Lithium?
Answer:
what happened to it, have the gone extinct
Water from a riverbed carries sediment downstream. The water pressure cuts deep into the riverbed, creating a deep, narrow channel What has happened? A A delta has formed . B Sand dunes are created. C A volcano has erupted . D A canyon has formed .
Answer:
A canyon has formed.
Explanation:
Determine the mass of AgCl(s) produced when 0.91 g of AgNO3 in an aqueous solution reacts with excess NaCl aqueous solution as shown below: AgNO3(aq) + NaCl(aq) → AgCl(s) + NaNO3(aq) i Respond with the correct number of significant figures in scientific notation (Use E notation and only 1 digit before decimal e.g. 2.5E5 for 2.5 x 10")
Answer:
0.77 g
Explanation:
Step 1: Write the balanced equation
AgNO₃(aq) + NaCl(aq) → AgCl(s) + NaNO₃(aq)
Step 2: Calculate the moles corresponding to 0.91 g of AgNO₃
The molar mass of AgNO₃ is 169.87 g/mol.
0.91 g × 1 mol/169.87 g = 5.4 × 10⁻³ mol
Step 3: Calculate the moles of AgCl produced from 5.4 × 10⁻³ moles of AgNO₃
The molar ratio of AgNO₃ to AgCl is 1:1. The moles of AgCl produced are 1/1 × 5.4 × 10⁻³ mol = 5.4 × 10⁻³ mol.
Step 4: Calculate the mass corresponding to 5.4 × 10⁻³ moles of AgCl
The molar mass of AgCl is 143.32 g/mol.
5.4 × 10⁻³ mol × 143.32 g/mol = 0.77 g
When lava cools outside the Earth, ____ igneous rocks are formed
Answer:The rock forms large crystals
Explanation:
Which is true about relative dating?
Potassium –Argon dating is used on very old rocks and minerals.
Carbon-14 dating is used on rocks and minerals that are relatively young
Relative dating uses the half-life of isotopes to get the exact age of a rock or mineral
The law of superposition is used to determine a rocks relative age.
it's the last one because it's depended on the rock layers
Answer:
The law of superposition is used to determine a rocks relative age.
What happens when sodium and chlorine react to make table salt
Please help
I need help please please
Answer:
B should be the answer, and ur low-key valid lol
Explanation:
what are the lewis structures for [SrCN]-
Three compounds that contain elements from Group 16 are SeO2F2 , SeOF2,
and SOF2. Possible Lewis electron dot diagrams for the compounds are
shown below. Which structure, A, B, or C, minimizes the formal charges for
each atom in SeO2F2 ?
Answer:
A
Explanation:
A formal charge (FC) is the charge assigned to an atom in a molecule, assuming that electrons in all chemical bonds are shared equally between atoms, regardless of relative electronegativity(Wikipedia).
The formal charge on an atom in a molecule reflects the electron count associated with the atom compared to the isolated neutral atom(University of Calgary).
Looking at all the structures listed A-E for SeO2F2, only structure A minimizes the formal charges for each atom in SeO2F2.