What a main difference between Earth and Jupiter?

A. Earth is an inner planet with a solid rock surface composition, while Jupiter is an outer planet with a gas surface composition.

B. Earth is an inner planet with a relatively long distance from the sun, while Jupiter is an outer planet with a relatively short distance from the sun.

C. Earth is an outer planet with a gas surface composition, while Jupiter is an inner planet with a solid rock surface composition.

D. Earth is an outer planet with a relatively short distance from the sun, while Jupiter is an inner planet with a long distance from the sun.

Answer:

0.25 of the original

Explanation:

(0.5)^(90/45)

The fraction of iron-59 after 90 days is 0.25.

Iron-59 decays following first-order kinetics. Given the half-life ([tex]t_{1/2}[/tex]) of 45 days, we can calculate the rate constant (k) using the following expression.

[tex]k = \frac{ln2}{t_{1/2}} =\frac{ln2}{45day} = 0.015 d^{-1}[/tex]

For first-order kinetics, we can find the fraction of Fe ([Fe]/[Fe]₀) after and an elapsed time (t) of 90 days, using the following equation.

[tex]\frac{[Fe]}{[Fe]_0} =e^{-k \times t } = e^{-0.015 d^{-1} \times 90 d } \approx 0,25[/tex]

The fraction of iron-59 after 90 days is 0.25.

You can learn more about kinetics here:

https://brainly.com/question/2284525

Answer:

A-B) 94 %.

C) 17.9 %.

D) 35.8 %.

Explanation:

Hello!

A-B) In this case, since the total mass of the mixture is 3.02 g and 1.43g+1.41g=2.84 g are recovered in total, we can compute the percent recovery as shown below:

[tex]\%rec=\frac{2.84g}{3.02g}*100\%\\\\\%rec=94\%[/tex]

C) Here, since the solution is made up of NaCl and water, we can say that the mass of the solution is 15g+69g=84g; thus, the percent by mass would be:

[tex]\%=\frac{15g}{84g}*100\%\\\\\%=17.9\%[/tex]

D) In this case, we simply divide 26.1 g by 73.0 g in order to obtain the percent:

[tex]\%=\frac{26.1g}{73.0g}*100\%\\\\\%=35.8\%[/tex]

Best regards!

The percentage in the cases are as follows;

Questions A and B are similar and can be solved as follows;

Question C can be solved as follows;

Question D can be solved as follows;

Read more:

https://brainly.com/question/24712879

Answer:

Noble gases are sometimes called "inert gases." What can you infer about the meaning of the word "inert" in chemistry? It refers to substances that easily lose electrons. It refers to substances that do not react with other substances. It refers to substances that have strong electrochemical charges.

Explanation:

Answer:

See explanation

Explanation:

The mechanism involves SN1 nucleophilic substitution reaction. The -OH group of the alcohol is first protonated. Since water is a good leaving group, -OH2 leaves the substrate creating a primary carbo cation.

A 1,2 methyl shift now occurs to create a tertiary carbo cation which is more stable leading to the major product shown in the image attached to this answer.

Answer:

A: Helium or Hydrogen

Explanation:

Terrestrial planets are the 4 inner most planets of the solar system which are mercury, venus, earth, Mars, while the giant planets are the 4 outer most which are Jupiter, Saturn, Uranus and Neptune.

Now, these outer most ones are the surface ones and are surrounded primarily by layers of hydrogen and helium gases.

Answer:

the distillate (D) and the bottoms (B) products flow rates are;

B = 72.1875 kmol/hr

D = 37.8125 kmol/hr

Explanation:

Given the data in the question;

as illustrated in the image below;

F1 stream, ( 90 kmol/hr ) contains 42 mol% p-xylene and Feed 2 ( 20 kmol/hr) contains 9mol% p-xylene, so;

more volatile → p-xylene

less volatile → o-xylene

now, Overall balance;

F1 + F2 = D + B

90 + 20 = D + B

D + B = 110    ------------- let this be equation 1

p-xylene. component balance;

0.42F1 + 0.09F2 = 0.99D +  0.03B

0.42(90) + 0.09(20) = 0.99D +  0.03B

37.8 + 1.8 = 0.99D +  0.03B

0.99D +  0.03B = 39.6 --------------- let this be equation 2

from equation 1 and 2

input (D = 110 - B) into equation 2

0.99(110 - B) +  0.03B = 39.6

108.9 - 0.99B + 0.03B = 39.6

108.9 - 39.6 = 0.99B - 0.03B

69.3 = 0.96B

B = 69.3 / 0.96

B = 72.1875

now, input B = 72.1875 into equation 1

D + B = 110

D + 72.1875 = 110

D = 110 - 72.1875

D = 37.8125

Therefore, the distillate (D) and the bottoms (B) products flow rates are;

B = 72.1875 kmol/hr

D = 37.8125 kmol/hr

Answer:

mH₂O = 6.4116 g

Explanation:

Let's write the given reaction:

2H₂ + O₂ -------> 2H₂O

The problem states that 5.7 g of oxygen reacts with excess hydrogen, hence, the limiting reagent is the oxygen. With this mass of oxygen, we can determine the moles, and then, the moles of water with the mole ratio:

moles = mass / atomic weight        AW of O₂ = 16 g/mol

Replacing we have:

moles O₂ = 5.70 / (16 * 2)

moles O₂ = 0.1781 moles

According to the balanced reaction, 1 mole of Oxygen produces 2 moles of water, so we have a mole ratio 1:2, therefore the moles of water would be twice the moles of oxygen:

moles H₂O = 0.1781 * 2 = 0.3562 moles

Finally the mass of water can be calculated solving for the mass from the expression of moles, and using molecular mass of water:

m = moles * MM          MM H₂O = 18 g/mol

m = 0.3562 * 18

Hope this helps

28 mol CaF

Math

Pre-Algebra

Order of Operations: BPEMDAS

Chemistry

Atomic Structure

Stoichiometry

Step 1: Define

[Given] 1.7 × 10²⁵ molecules CaF

[Solve] moles CaF

Step 2: Identify Conversions

Avogadro's Number

Step 3: Convert

Step 4: Check

Follow sig fig rules and round. We are given 2 sig figs.

28.2298 mol CaF ≈ 28 mol CaF

Answer:

B

Explanation:

Most planets in the solar system don't have water. Helium and hydrogen are two of the many gasses in planets. Therefore, B is the best answer.

Answer:

Within three molecules of Ethane, it would have 6 carbon, and 18 hydrogen atoms in it.

Explanation:

Answer:

Fact: There’s only one letter that doesn’t appear in any U.S. state name

And that is Q

Explanation:

Answer:

0.0258 mol Answer .......

Answer:

60.88%

Explanation:

The balanced equation of the reaction is given as;

2 AgNO3 (aq) + BaCl2 (aq) → 2 AgCl (s) + Ba(NO3)2 (aq)

Since AgNO3 is in excess, the limiting reactant is BaCl2. From the reaction;

1 mol of BaCl2 produces 2 mol of AgCl

Converting to masses;

Mass = Number of mol * Molar mass

BaCl2;

Mass = 1 * 208.23 g/mol = 208.23 g

AgCl;

Mass = 2 * 143.32 g/mol = 286.64 g

208.23 g BaCl2 produces 286.64 g of AgCl

x g BaCl2 produces 7.123 g of AgCl

Solving for x;

x = 7.123 * 208.23 / 286.64 = 5.1745 g

Mass percent = Mass / Total mass of Mixture  * 100

Mass Percent = 5.1745 / 8.500 = 0.6088 * 100 = 60.88%

Answer: the electrostatic potential energy is -3.26 × 10⁻¹⁸ J

Explanation:

Given the data in the question;

I think the value of electrostatic potential energy of calcium sulfide CaS formed will be less(more negative) than KCl because the Ca2+ and S2- ions has more charge that is +2 and -2 respectively when compared to Kcl which has +1 and -1 charge.so it will be more negative.

radius = r[tex]_{ca+2}[/tex] + r[tex]_{s-2}[/tex] = 100 + 184 = 284 pm = 2.84 × 10⁻¹⁰ m

we know that; k = 2.31 × 10⁻²⁸ J

q1 = 2  ( charge on Ca⁺² )

q2 = -2( charge on S⁻²)

so

Ep = k × q1q2/r

so we substitute

Ep = 2.31 × 10⁻²⁸ × (+2×-2) / 2.84 × 10⁻¹⁰

Ep = (2.31 × 10⁻²⁸ × -4) / 2.84 × 10⁻¹⁰

Ep = -9.24 × 10⁻²⁸ / 2.84 × 10⁻¹⁰

Ep = -3.26 × 10⁻¹⁸ J

Therefore, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J

Based on the data provided, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J

The electrostatic potential energy is the work done in moving the charge from infinity to that point against the electric field.

The electrostatic potential energy between any two charges q1, q2 separated by distance r is derived from Coulomb’s law and mathematically given as:

where

From the data provided:

ionic radii of Ca2+ r1 = 100 pm

ionic radii of S2– = 184 pm.

Chargeon Ca2+ = +2

Charge on S2_ = -2

From the data above, it most likely that the value of electrostatic potential energy of calcium sulfide CaS formed will be less(more negative) than KCl because the Ca2+ and S2- ions has a greater charge of +2 and -2 respectively compared to Kcl which has +1 and -1 charge.

Calculating the electrostatic potential energy, Ep:

radius = r1 + r2 = 100 + 184 = 284 pm

r = 2.84 × 10⁻¹⁰ m

k = 2.31 × 10⁻²⁸ J

q1 = 2  ( charge on Ca⁺² )

q2 = -2( charge on S⁻²)

Then:

Ep = k × q1q2/r

Substituting the values above in the equation:

Ep = 2.31 × 10⁻²⁸ × (+2 ×-2) / 2.84 × 10⁻¹⁰

Ep = (2.31 × 10⁻²⁸ × -4) / 2.84 × 10⁻¹⁰

Ep = -9.24 × 10⁻²⁸ / 2.84 × 10⁻¹⁰

Ep = -3.26 × 10⁻¹⁸ J

Therefore, the electrostatic potential energy is -3.26 × 10⁻¹⁸ J.

Learn more about electrostatic potential energy at: https://brainly.com/question/24648428

The full question is shown in the image attached to this answer

Answer:

6.2 * 10^-3

Explanation:

The reaction at equilibrium is as follows;

TiCl4(l) → Ti(s)+ 2Cl2(g)

We have to obtain the concentration of chlorine gas as follows;

[Cl2] = 1.08/70.91 g/mol × 5.2 L

[Cl2] = 0.079 M

Kc = [Cl2]^2

Kc = [ 0.079]^2

Kc = 6.2 * 10^-3

Answer:

Explanation:

Para mejor entendimiento, reeescribiremos la ley que pusiste:

S = 64t - 8t²    (1)

De acuerdo al enunciado del problema, S tiene unidades de pie y t en segundos, por lo tanto, S, que se refiere a la posición o altura alcanza de la piedra, puede ser determinado usando esa expresión a tiempos específicos.

Para el calculo de velocidad usamos la siguiente expresión:

V = -g * t     (2)      g: 32.16 ft/s

Tomando en cuenta estas expresiones, veamos los valores de posición y velocidad:

a) Para t = 2 s

S = 64(2) - 8(2)²

S = 96 ft

V = -32.16 * 2

V = -64.32 ft/s

Para t = 3 s

S = 64(3) - 8(3)²

S = 120 ft

V = -32.16 * 3

V = -96.48 ft/s

b) Para saber la altura que alcanzará, usamos la expresión de altura máxima que es la siguiente:

Smáx = -V₀² / 2g   (3)

Para el valor de la velocidad inicial, podemos asumir el valor de la velocidad dada por la formula de la ley S, que es 64. Esto porque al ser multiplicado por el valor del tiempo, queda en unidades de distancia, asi que este valor debe tener unidades de velocidad. Reemplazando este valor en la expresión:

Smáx = -(64)² / 2 * 32.16

Smáx = 63.68 ft

c) Para esta parte, usamos nuevamente la formula de la ley S, usando t = 4 s y listo:

S = 64(4) - 8(16)

S = 128 ft

Espero te sirva

Hello. You forgot and show the compounds. The compounds are in the attached image.

Answer:

I < II < III

Explanation:

The stability of the presented compounds must be analyzed, taking into account the free electrons to form arrangements between the atoms. In this case, the molecules of greater stability follow the concept of valence and are characterized as those that manage to reach a large number of elements that manage to obey the octet rule.

Answer:

65.0cp

Explanation:

Answer:

Step 1 should be convert atoms to moles (n). Step 2 should be convert moles (n) to mass (m).

Step 1

Use dimensional analysis to convert the number of atoms to moles.

1 mole atoms = 6.022 × 10²³ atoms

n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms) = 3.8193 mol Ag

Step 2

Convert the moles of Ag to mass.

mass (m) = moles (n) × molar mass (M)

n(Ag) = 3.8193 mol Ag

M(Ag) = atomic weight on the periodic table in g/mol = 107.868 g Ag/mol Ag

m(Ag) = 3.8193 mol × 107.868 g/mol = 412 g Ag = 410 g Ag rounded to two significant figures

The mass of 2.3 × 10²⁴ Ag atoms is approximately 410 g.

Explanation:

The number of moles that are present is 2.3 × 10²⁴ atoms of silver are 3.8193 moles that can be determined using Avogadro's law.

One mole:

A mole is defined as 6.022 × 10²³ of some chemical unit, be it atoms, molecules, ions, or others.

1 mole = 6.022 × 10²³ atoms

n(Ag) = 2.3 × 10²⁴ Ag atoms × (1 mol Ag/6.022 × 10²³ Ag atoms)

n(Ag) = 3.8193 mol Ag

Thus, the number of moles is 3.8193 moles.

Find more information about one mole here:

brainly.com/question/1358482

Answer:

the answer to this question is A H202

Answer:

b

Explanation:

Combinations between two strands:

T - A

A - T

C - G

G - C

(so if one strand has A for example, then the other strand must have T in the same spot)

Bases   which are present on the other strand of DNA are TAT.

DNA or deoxyribonucleic acid is a hereditary material present in humans as well as all living beings. Almost every cell present in the body has DNA. Most DNA are located inside the cell , that is in the nucleus of the cell. But a small portion of DNA  can be found in the mitochondria of the cell as well.

The information in DNA is stored as a code which is composed of four chemical bases 1) adenine 2)guanine 3) cytosine  4) thymine . The human DNA consists of 3 billion bases . The order of of these bases determine information which is used for building and maintaining an organism.

The DNA bases can pair with each other .Adenine pairs with thymine   and guanine with cytosine to form units which are called as base pairs.Each base apart from other complementary base it also attaches itself to a sugar and a phosphate molecule.

Learn more about DNA ,here:

https://brainly.com/question/22499464

#SPJ6

Answer:

d. a brittle solid.

Explanation:

Hello!

In this case, since cesium fluoride is widely known as an ionic compound due to the large electronegativity difference, it is possible to discard a. due to its crystalline structure, b. because conducting solids are metals, c. because ionic compounds are not likely to be gases and e. because even when it is soluble in water, the problem is not referring to an aqueous solution; therefore, the answer is d. a brittle solid.

Best regards!

Answer:

Ammonia

Explanation:

Both amines and amides are structurally similar to ammonia, the difference is the introduction of a carbon into the structure.

Answer:

37.7 atm

Explanation:

Using the relation;

(P + an^2/V^2) (V - nb) = nRT

(P + an^2/V^2) = nRT/(V - nb)

a = 0.0341 atm dm^2 Mol^2

b = 0.0237 dm/mol

P = nRT/(V - nb) - an^2/V^2

P = [4.3 * 0.082 * 325 / (3.6 - (4.3 * 0.0237))] - (0.0341 * (4.3^2))/(3.6^2)

P = 114.595/(3.498) - 0.0487

P = 37.7 atm

Answer:

0.012 M

Explanation:

Step 1: Given and required data

Step 2: Calculate the moles (n) of solute (KCl)

We will use the following expression.

n = m/M = 0.64 g / (74.553 g/mol) = 8.6 × 10⁻³ mol

Step 3: Calculate the molar concentration (C) of the solution

The molarity is equal to the moles of solute divided by the liters of solution.

C = 8.6 × 10⁻³ mol/0.725 L = 0.012 M

Answer:

The same instrument must be used to measure the unknown solution as was used to measure the known (standard) solutions that were used to create the calibration curve.

The analyte in the unknown solution must be the same analyte (or type of analyte) that is present in the known (standard) solutions that were used to create the calibration curve.

Domain and range restrictions must be observed.

Explanation:

Calibration curves are tools necessary in understanding the instrumental response for any analyte.

A calibration curve is obtained by preparing a set of  standard solutions with known concentrations of the analyte. The instrument response for each concentration is measured  and plotted against the concentration of the standard solution. The linear portion of this plot may be used to determine the unknown concentration of a sample of the analyte.  

The equation of the best-fit line is  used to determine the concentration of the unknown sample.

Answer:

this some next level stuff homie

Explanation:

imma just guess 7?

The thing being described is shaped like a ring with five parts. Inside the ring, there are two special types of bonds. This has a sulfur that is positively charged and has one unshared pair, also it has an NH group with one unshared pair.

Compound B is a substance that is made up of two or more different elements or molecules.

The thing being described has a ring with six members and three pi bonds. It has an oxygen atom with an extra proton and one extra electron. This substance is not aromatic.

Read more about  aromatic here:

https://brainly.com/question/30624539

#SPJ6

Answer:

snow is made up of a variety of mostly organic matter, including dead or dying animals and phytoplankton, protists, fecal matter, sand, and other inorganic dust.

Explanation:

I hope I helped!!

Plz mark me brainliest it would really make my day!

Answer:

I think its organic unless we are talking about this snow storm then no