Using the formula M=dx v, Calculate the mass of a liquid with a density of
17.5 g/mL and a volume of 7mL.

Answers

Answer 1

Answer:

The answer is 122.5 g

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

mass = Density × volume

From the question

volume = 7 mL

density = 17.5 g/mL

We have

mass = 17.5 × 7

We have the final answer as

122.5 g

Hope this helps you


Related Questions


With circulation, the heart provides your body with:
a. oxygen
b. nutrients
C. a way to get rid of waste
d. all of the above

Answers

Answer:  D) all of the above

Explanation:

The lungs pump oxygen in and carbon dioxide out, which goes through the blood stream to help with the cell's energy needs.

Nutrients pass through the blood stream as well. The nutrients start with the digestive system (mouth, esophagus, stomach, small intestine) before going into the blood stream. The nutrients are building blocks to help make new cells when old ones die off.

When those cells die off, the body sheds them like dead skin, but internal dead cells are passed off as waste. This waste and other byproducts the body doesn't need passes through the blood stream as well.

In short, the blood stream is basically the highway to help get desired materials (eg: oxygen and nutrients) and get rid of waste (eg: carbon dioxide and other unwanted byproducts or dead cell material)

So that's why the answer includes A, B and C.

What is the volume of a weather balloon that has 39 grams of helium with a density 0.017 g/mL?

Answers

Answer:

The answer is 235.29 mL

Explanation:

The volume of a substance when given the density and mass can be found by using the formula

[tex]volume = \frac{mass}{density} \\ [/tex]

From the question.

density = 0.017 g/mL

mass = 4 g

We have

[tex]volume = \frac{4}{0.017} \\ = 235.2941176...[/tex]

We have the final answer as

235.29 mL

Hope this helps you

Consider the reaction below. 2 Upper N Upper H Subscript 3 (g) Baseline double headed arrow Upper N Subscript 2 (g) Baseline + 3 Upper H Subscript 2 (g). What is the most likely effect to the forward reaction if there is an increase in pressure on this reaction? The reactant surface area increases. The reaction rate decreases. The reaction is not affected at all. The reaction stops completely.

Answers

Answer:

The increase in pressure of the reacting system will increase the formation of NH₃

Explanation:

The given parameters are;

2NH₃ (g) ⇄ N₂ (g) + 3H₂ (g)

The number of molecules in the reactant side of the equation = 2 molecules

The number of molecules in the product side of the equation = 1 + 3 = 4 molecules

Avogadro's law states that equal volume of all gases at a given temperature and pressure contains equal number of molecules

Therefore, given that the number of molecules of the product are twice the number of molecules of the reactant, the volume of the product is twice the volume of the reactant

If the pressure is increased, at constant temperature by Boyles law, the volume will be reduced, favoring the formation of the low volume occupying NH₃

Therefore, the reverse reaction (formation of NH₃) will preferably occur.

Answer:

The answer is B

Explanation:

The other answer is incorrect. The correct Answer is B

Trust Me

what is the percent of mercury?

Answers

Answer:

42%

Explanation:

A sealed 512 cm3 flask is full to capacity with 16 g of a substance. Determine the density of the substance.​

Answers

Answer:

The answer is 0.031 g/cm³

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\[/tex]

From the question

mass = 16 g

volume = 512 cm³

We have

[tex]density = \frac{16}{512} = \frac{1}{32} \\ = 0.03125[/tex]

We have the final answer as

0.031 g/cm³

Hope this helps you

Today scientists know that organisms are much less diverse than Darwin imagined.

True or false?

Answers

Answer:

FALSE

Explanation:

they were much more diverse

The other person is right it is false

which balances the equation Mg + O2 → MgO

Answers

Answer:

2Mg+[tex]O_{2}[/tex]→2MgO

Explanation:

The first step is magnesium + oxygen equals magnesium oxide

The second step is changing that into an equation which looks like Mg+[tex]O_{2}[/tex]→MgO

The third step is to 2*Mg and 2*O as well as the product has to be 2*Mg,2*O which gets the equation to become balanced as 2Mg+[tex]O_{2}[/tex]→2MgO

The coefficient 2 balance the given reaction. The balanced equation for the given reaction is given as [tex]\rm Mg + O_2 \rightarrow 2MgO[/tex].

A balanced equation is a mathematical representation of a chemical reaction that respects the law of mass conservation. It depicts the reactants and products of the reaction, as well as the relative amounts of each species. The unbalanced equation is [tex]\rm Mg + O_2 \rightarrow MgO[/tex]. One magnesium (Mg) atom on the left side and one on the right side, so the magnesium is already balanced. Balance the oxygen (O) atoms. On the left side, there are two oxygen (O) atoms present in the O2 molecule. On the right side, there is only one oxygen (O) atom in the MgO molecule. To balance the oxygen atoms, we need to add a coefficient of 2 in front of MgO: [tex]\rm Mg + O_2 \rightarrow 2MgO[/tex]. The balanced equation is [tex]\rm Mg + O_2 \rightarrow 2MgO[/tex].

To know more about balanced equation, here:

https://brainly.com/question/12192253

#SPJ4

You just got a free ticket for a boat ride, and you can bring along
2 friends! Unfortunately, you have 5 friends who want to come along.

Answers

Answer:

10

Explanation:

Khan Academy

1. An atom has 57 neutrons and 42 protons. How many electrons will this atom have if it
neutral?
57
44
42
40

Answers

Answer:

42

Explanation:

Because the proton number or atomic number is equal to electron number.

Answer:

42

In order for it to be neutral there must be the same amount of protons and neutrons

Have a nice day!   :)

PLEASE HURRY WILL GIVE BRAINLIEST

Click Oil Basics and use the information to complete this passage that discusses how plastic production affects society.

The production of plastics makes life
{answer} , so it benefits society. On the other hand, the production of plastics causes air and water {answer} , so it also harms society.

Answers

Answer:

easier and pollution

Explanation:

I just had this question and got it right

Which statement best defines potential enregy?

A. Potential energy is stored energy.

B. Potential energy is energy that can change over time.

C.Potential energy is the energy of motion.

D. Potential energy is the type of energy a roller coaster uses.

Answers

Answer:

A. Potential energy is stored energy

Explanation:

Answer:

A

Explanation:

i have the same question

If air temperature decreases, then
wave height will decrease
ocean temperature will also decrease the same amount
ocean temperature will also decrease, but not as much
ocean temperature will also decrease, but a greater amount
wave height will increase

Answers

Answer:

ocean temp

Explanation:

If air temperature decreases, then wave height will decrease and ocean temperature will also decrease, but not as much.

What is ocean temperature ?

The water's temperature at the surface is known as the ocean surface temperature. Depending on the measuring technique, the term "surface" might signify anything from 1 millimeter to 20 meters below the sea's surface.

Due to changes in solar radiation and the physical characteristics of water, the temperature of ocean water fluctuates depending on location, both in terms of latitude and depth.

Water contracts and gets denser as it cools. The density of water is influenced by temperature and salinity, and as a result, water moves up or down through the ocean's strata and circulates as currents.

Thus, option B is correct.

To learn more about ocean temperature, follow the link;

https://brainly.com/question/12111508

#SPJ2

I need help on Chemistry?

ANYONE PLEASE?

Answers

Answer:

1. 1g/ml

Explanation:

1. Density is mass divided by volume (g/mL).

10g/10mL = 1 g/mL

2. When you already know the density and the volume, you can use the density as a unit converter.

[tex]5mL*\frac{20g}{mL} = 100g[/tex]

3. It's the same with density and mass.

[tex]20g*\frac{1mL}{5g} = 4mL[/tex]

Nio conducts a science experiment. He puts yeast into a bottle with water and sugar, and then caps the bottle with a balloon. He returns two hours later and notices there are bubbles on the surface of the mixture in the bottle and that the balloon has inflated, but there are no other apparent changes.
What most likely happened?

a non-chemical change, because there are no indicators of chemical changes taking place
a chemical change, because the mixture changed color
a chemical change, because a gas was produced
a non-chemical change, because the changes that occurred are reversible

Answers

Answer:the answer is a chemical change, because a gas was produced

Explanation:  yeast is a chemical

Answer:

The answer is C.

"Chemical changes occur when a substance combines with another to form a new substance, called chemical synthesis or, alternatively, chemical decomposition into two or more different substances. These processes are called chemical reactions and, in general, are not reversible except by further chemical reactions."

Explanation:

All surfaces have texture, which means it affects how things move over it. When it takes a long time for friction to slow down an object, what is most likely true about the surface the object is moving on? The surface is dry. The surface is rough. The surface is uneven. The surface is smooth.

Answers

The question is incomplete, the complete question is;

All surfaces have texture, which means it affects how things move over it. When it takes a long time for friction to slow down and object, what is MOST LIKELY true about the surface the object is moving on? (A) The surface is dry (B) The surface is rough (C) The surface is uneven (D) The surface is smooth

Answer:

(D) The surface is smooth

Explanation:

Friction exists because of relative motion between two surfaces in contact with each other. However the magnitude of friction depends on how rough or smooth the surface is.

For smooth surfaces, there is little or no resistance to motion as objects move over the surface. Hence objects take a longer time to slow down on a smooth surface due to very little friction.

On a rough surface, objects tend to slow down relatively quickly. Hence, less resistance to motion on a smooth surface makes an object to take a longer time to slow down on a smooth surface than on a rough surface.

Answer: D

Explanation: Because if the surface is smooth it causes it to be more even for it to be able to cause Friction

if you find this helpful, Your welcome, if not, sorry.

Solve for Keq , given the following concentrations at equilibrium. Based on the calculated Keq, are products or reactants larger?
CO2 = 3.0 M O2 = 1.5 M CO = 2.0 M

Answers

Answer:

it blows up very lighty

Explanation:

Why can two water molecules stick to each other?

Answers

I think Both of these atoms can form a hydrogen bond with oxygen atoms of different water molecules. If I’m wrong sorry . Have a nice day :)

Jamal is 8 miles away from his house. He rides his bike home toward home at a speed of 12 mph..

How far away from home is he after a half hour?

Answers

Answer: 2miles

Explanation:if he’s going 12 miles in one hour, in half an hour he would’ve made it 6 miles. 8-6=2

Answer: b. 2 miles

Explanation:

Based on the results the students record, which group makes the most accurate measurements of the object?

Answers

Answer:

B.

Explanation:

It’s because when you subtract 78.5 and 77.5 you get 1. And when you do 79.5 and 78.5 you get 1 too. I know this because I got the answer right

1. The human eye can detect wavelengths of light as short as 0.000037 cm. What is this
wavelength in nanometers?

Answers

Answer:

0.000037 cm is 370 nanometers

Explanation:

Which of the following atoms has the greatest ionization energy?

a.)W
b.)C
C.)d
P.)d

Answers

Answer:

helium

Explanation:

because there are no electrons screening it from the nucleus

A runner completes a 400m race in 43.9s. What is his average speed?

Answers

Answer:

average speed around 9.1 meters/second

Explanation:

400 divided by 43.9

Write the principle of separation of mixture.

Answers

Explanation:

Mixtures can be separated using a variety of techniques. Chromatography involves solvent separation on a solid medium. Distillation takes advantage of differences in boiling points. Evaporation removes a liquid from a solution to leave a solid material.

Which of the following happens to the particles when the temperature of liquid water drops?

Answers

Explanation:

when water is in liquid form and the temperature DROPS it becomes solid ice the process is melting , freezing and evaporation this goes in a circle

Elements can be described by their properties. Some of these properties are physical properties and some are chemical properties Observe the list provided. Which one of these contains ONLY Cchemical properties


A) C,E,F
B) B,C,E
C) B, E, F
D) C,D,E​

Answers

Its a c,e,f

Sadly i got it wrong

Flammability, Ability to rust and Ability to tarnish (C,E,F) are chemical properties of an element.

The property of an element is the characteristic feature of that element which helps us to differentiate it from another  element.

We have

The Physical proprieties- These are features of an element which we can identify by sight and touch, Some of them include colour, hardness, boiling and ,melting point, size etcChemical properties These are the features of an element which w\e observe when the element has undergone a chemical change which changes its composition. Examples are Flammability, rust, tarnish , corrosion etc.

See more here:https://brainly.com/question/2116116

How do combination circuits help prevent problems in circuits in a home? If it helps, think about a bedroom since all electrical work in a bedroom is on the same circuit.

Answers

‍♀️ ◻️✅◾️▫️‍◾️◻️◻️◼️

What is your carbon footprint?

the amount of carbon dioxide you use when recycling
the amount of oxygen put into the atmosphere due to your consumption of fossil fuels
the amount of carbon dioxide and oxygen in the atmosphere at any given time
the amount of carbon dioxide put into the atmosphere due to your consumption of fossil fuels

Answers

Answer:

c. .....................

Answer: the amount of carbon dioxide put into the atmosphere due to your consumption of fossil fuels

Your carbon footprint is the amount of carbon dioxide and other carbon compounds emitted, because of your use of fossil fuels.

Hope this helps!

Why is it easy for some elements to lose electrons and harder for others?

Answers

Answer:

The further away electrons are from the nucleus the easier it is for atoms to use electrons.

Explanation:

Each water molecule can form hydrogen bonds with up to _____ neighbors

Group of answer choices

6

8

2

4

Answers

Answer:

2

Explanation:

thats the answer.have good day

HELP ME OUT PLEASE!! I NEED HELP !
This diagram represents one of the four levels of industry. Which term best
completes the diagram?
Factory employees
Oil refinery workers
Butchers
A. Quaternary sector
OB. Secondary sector
C. Tertiary sector
D. Primary sector

Answers

It’s b secondary sector

Answer: OB. Secondary Sectors.

Explanation: Make sure to study as the text provided, and study guide state manufacturers, butchers, and factory employees are apart of the secondary sector in the world economy. You’ll do great on Quiz 3.2.5! Make sure to study, have a g’day. Please don’t listen to people who say this answer is falsen as many other questions do, don’t be the one to spread false information as this people’s academics, here’s a picture as well ❤︎. Again, its B!

Other Questions
WILL MARK BRANLIEST PLZ HELP FASTAnswer The Questions Based on The Graph1. Which limiting factor(s) in this lab simulation are biotic?2. Which limiting factor(s) in this lab simulation are abiotic?3. Which limiting factor impacted the cricket frog population the most? Use evidence to support your answer.4. Which limiting factor impacted the cricket frog population the least? Use evidence to support your answer.5. Mosquitoes can carry and transmit disease to animals and humans. Explain how the cricket frog plays an important role in limiting the spread of mosquito-borne illnesses like West Nile virus and malaria.6. Predict the long-term effects of these limiting factors on the cricket frog population in the pond ecosystem. Which naval battle established the u.s. navy as a strong fighting force Which food and exercise habits most likely increase one's chances of developing chronic diseases, like type-2 diabetes? PLEASE HELP ASAP A bucket contains 48 fluid ounces of water. How many quarts of water does the bucket contain? Enter your answer as a decimal in the box. BLANK quarts 4. Give two reasons why GDP is often not seen as the best measure of living standards. As lactose approaches the active site of lactase, as shown in the image, which of the following occurs first?The lactose molecule is broken into glucose and galactose.Lactase shifts to its lowest free energy level to allow lactose to enter the active site.Lactose creates a microenvironment as it approaches lactase to promote binding.Temporary bonding occurs between the active site and the substrate, causing a conformational change. Where did Christianity first develop? 67Name_Michael Goodger Lesson 4 Homework1.Convert and write an equation with an exponent.A. 2 meters to centimeters2m = 200 cm2 x 10 = 200B. 108 centimeters to meters 108 cm = 1 m1.08% 101=108C. 2.49 meters to centimeters 2.49 m = 249cm2.49x 103= 249D. 50 centimeters to meters 50 cm = 1 m50x1=50E 6.3 meters to centimeters 6.3 m = 63 cm6.3x63=63F 7 centimeters to meters Icm = _mIn the space below, list the letters of the problems where smaller units are converted to larger units.2. Convert using an equation with an exponent. Use your meter strip when it helps you.a. 4 meters to millimetersmmb. 1.7 meters to millimetersmm1050 millimetornm =m = Write a function, maxRadius, to find an index of a Planet with the largest radius in the array. The function should Solve the inequality 3(x - 2) + 1 = x + 2(x + 2).A XS4B. XX-5C. no solutionD. all real numbers In the 1700s, Anthony Benezet was a Quaker whoO organized the Pennsylvania Abolitionist Society.O brought the first enslaved workers to Pennsylvania.O helped enslaved people escape to freedom in the North.O ran auctions where enslaved people were purchased. Which type of rock forms as a result of cooling and crystallization?igneousmetamorphicclasticsedimentary A company offers ID theft protection using leads obtained from client banks. Three employees each work 40 hours a week on the leads. These employees are each paid $25 per hour. Each employee identifies an average of 3,000 potential leads a week. There are no duplications in these three lists. Material costs are $1,000 per week, and overhead costs are $9,000 per week. An average of 4 percent of the potential leads actually sign up for the service, paying a one-time fee of $70. Consider the output as the fees generated. a) What are the labor hours productivity and the multifactor productivity for this operation Whats 19,975 divided by 25 show your work Group the labels according to the type of waves they describe. 2. Cul de las siguientes respuestas es una de las creencias del padre que seocasion en su infancia?A. Las escopetas son para los jvenes sin lugar a dudaB. Los montes son lugares donde no existe peligroC. El padre debe ofrecerle todo lo que el nunca tuvo a su hijoD. Los dias son ms largos cuando se le pone atencin al tiempo What is the strongest symbol in Once Upon a Time.. by Nadine Gordimer? Question 3. The diameter M of a medium coffee CUP at a coffee shop follows the Normal distribution with a mean of 2.96 inches and a standard deviation of 0.02 inches. The diameter L of a medium coffee cup LID at the coffee shop follows the Normal distribution with a mean of 3.01 inches and standard deviation of 0.01 inches. Assume that M and L are independent random variables. Let D = L-M be the difference between the lid's diameter.What is the mean of D? Use 2 places after the decimal.What is the standard deviation of D? Use 4 places after the decimal.For a lid to fit on the cup, the difference, D, needs to be less than .08 inches. Find the probability that a randomly select lid will fit on the medium coffee cup. Use 3 places after the decimal. Which words from the passage show how the the writer feels. 1 their giggles felt like needles. I was quickly getting the picture. They were tossing their locks. This afternoon is going to be so much fun. What is the sample mean of the data set? Round to thenearest hundredth133What is the sample standard deviation of the sample?Round to the nearest hundredth234342436539636739840944