Answer:
1.363×10^15 seconds
Explanation:
The spaceship travels an elliptical orbit from a point of 6590km from the earth center to the moon and 38500km from the earth center.
To calculate the time taken from Kepler's third Law :
T^2 = ( 4π^2/GMe ) r^3
Where Me is the mass of the earth
r is the average distance travel
G is the universal gravitational constant. = 6.67×10-11 m3 kg-1 s-2
π = 3.14
Me = mass of earth = 5.972×10^24kg
r =( r minimum + r maximum)/2 ......1
rmin = 6590km
rmax = 385000km
From equation 1
r = (6590+385000)/2
r = 391590/2
r = 195795km
From T^2 = ( 4π^2/GMe ) r^3
T^2 = (4 × 3.14^2/ 6.67×10-11 × 5.972×10^24) × 195795^3
= ( 4×9.8596/ 3.983×10^14 ) × 7.5059×10^15
= 39.4384/ 3.983×10^14 ) × 7.5059×10^15
= (9.901×10^14) × 7.5059×10^15
T^2 = 7.4321× 10^30
T =√7.4321× 10^30
T = 2.726×10^15 seconds
The time for one way trip from Earth to the moon is :
∆T = T/2
= 2.726×10^15 /2
= 1.363×10^15 secs
When a hydrometer (see Fig. 2) having a stem diameter of 0.30 in. is placed in water, the stem protrudes 3.15 in. above the water surface. If the water is replaced with a liquid having a specific gravity of 1.10, how much of the stem would protrude above the liquid surface
Answer:
5.79 in
Explanation:
We are given that
Diameter,d=0.30 in
Radius,r=[tex]\frac{d}{2}=\frac{0.30}{2}=0.15 in[/tex]
Weight of hydrometer,W=0.042 lb
Specific gravity(SG)=1.10
Height of stem from the water surface=3.15 in
Density of water=[tex]62.4lb/ft^3[/tex]
In water
Volume of water displaced [tex]V=\frac{mass}{density}=\frac{0.042}{62.4}=6.73\times 10^{-4} ft^3[/tex]
Volume of another liquid displaced=[tex]V'=\frac{V}{SG}=\frac{6.73\times 10^{-4}}{1.19}=5.66\times 10^{-4}ft^3[/tex]
Change in volume=V-V'
[tex]V-V'=\pi r^2 l[/tex]
Substitute the values
[tex]6.73\times 10^{-4}-5.66\times 10^{-4}=3.14\times (\frac{0.15}{12})^2l[/tex]
By using
1 ft=12 in
[tex]\pi=3.14[/tex]
[tex]l=\frac{6.73\times 10^{-4}-5.66\times 10^{-4}}{3.14\times (\frac{0.15}{12})^2}[/tex]
l=2.64 in
Total height=h+l=3.15+2.64= 5.79 in
Hence, the height of the stem protrude above the liquid surface=5.79 in
You illuminate a slit with a width of 77.7 μm with a light of wavelength 721 nm and observe the resulting diffraction pattern on a screen that is situated 2.83 m from the slit. What is the width, in centimeters, of the pattern's central maximum
Answer:
The width is [tex]Z = 0.0424 \ m[/tex]
Explanation:
From the question we are told that
The width of the slit is [tex]d = 77.7 \mu m = 77.7 *10^{-6} \ m[/tex]
The wavelength of the light is [tex]\lambda = 721 \ nm[/tex]
The position of the screen is [tex]D = 2.83 \ m[/tex]
Generally angle at which the first minimum of the interference pattern the light occurs is mathematically represented as
[tex]\theta = sin ^{-1}[\frac{m \lambda}{d} ][/tex]
Where m which is the order of the interference is 1
substituting values
[tex]\theta = sin ^{-1}[\frac{1 *721*10^{-9}}{ 77.7*10^{-6}} ][/tex]
[tex]\theta = 0.5317 ^o[/tex]
Now the width of first minimum of the interference pattern is mathematically evaluated as
[tex]Y = D sin \theta[/tex]
substituting values
[tex]Y = 2.283 * sin (0.5317)[/tex]
[tex]Y = 0.02 12 \ m[/tex]
Now the width of the pattern's central maximum is mathematically evaluated as
[tex]Z = 2 * Y[/tex]
substituting values
[tex]Z = 2 * 0.0212[/tex]
[tex]Z = 0.0424 \ m[/tex]
A circular coil of wire of 200 turns and diameter 2.0 cm carries a current of 4.0 A. It is placed in a magnetic field of 0.70 T with the plane of the coil making an angle of 30° with the magnetic field. What is the magnetic torque on the coil?
Answer:
0.087976 Nm
Explanation:
The magnetic torque (τ) on a current-carrying loop in a magnetic field is given by;
τ = NIAB sinθ --------- (i)
Where;
N = number of turns of the loop
I = current in the loop
A = area of each of the turns
B = magnetic field
θ = angle the loop makes with the magnetic field
From the question;
N = 200
I = 4.0A
B = 0.70T
θ = 30°
A = π d² / 4 [d = diameter of the coil = 2.0cm = 0.02m]
A = π x 0.02² / 4 = 0.0003142m² [taking π = 3.142]
Substitute these values into equation (i) as follows;
τ = 200 x 4.0 x 0.0003142 x 0.70 sin30°
τ = 200 x 4.0 x 0.0003142 x 0.70 x 0.5
τ = 200 x 4.0 x 0.0003142 x 0.70
τ = 0.087976 Nm
Therefore, the torque on the coil is 0.087976 Nm
When you are told that the wind has a "Small Coriolis force" associated with it, what is that "small force" exactly
Answer:
Coriolis force is a type of force of inertia that acts on objects that is in motion within a frame of reference that rotates with respect to an inertial frame. Due to the rotation of the earth, circulating air is deflected result of the Coriolis force, instead of the air circulating between the earth poles and the equator in a straight manner. Because of the effect of the Coriolis force, air movement deflects toward the right in the Northern Hemisphere and toward the left in the Southern Hemisphere, eventually taking a curved path of travel.
If you could see stars during the day, this is what the sky would look like at noon on a given day. The Sun is near the stars of the constellation Gemini. Near which constellation would you expect the Sun to be located at sunset?
Answer:
The sun will be located near the Gemini constellation at sunset
Find the terminal velocity (in m/s) of a spherical bacterium (diameter 1.81 µm) falling in water. You will first need to note that the drag force is equal to the weight at terminal velocity. Take the density of the bacterium to be 1.10 ✕ 103 kg/m3. (Assume the viscosity of water is 1.002 ✕ 10−3 kg/(m · s).)
Answer:
The terminal velocity of a spherical bacterium falling in the water is 1.96x10⁻⁶ m/s.
Explanation:
The terminal velocity of the bacterium can be calculated using the following equation:
[tex] F = 6\pi*\eta*rv [/tex] (1)
Where:
F: is drag force equal to the weight
η: is the viscosity = 1.002x10⁻³ kg/(m*s)
r: is the radium of the bacterium = d/2 = 1.81 μm/2 = 0.905 μm
v: is the terminal velocity
Since that F = mg and by solving equation (1) for v we have:
[tex] v = \frac{mg}{6\pi*\eta*r} [/tex]
We can find the mass as follows:
[tex] \rho = \frac{m}{V} \rightarrow m = \rho*V [/tex]
Where:
ρ: is the density of the bacterium = 1.10x10³ kg/m³
V: is the volume of the spherical bacterium
[tex] m = \rho*V = \rho*\frac{4}{3}\pi*r^{3} = 1.10 \cdot 10^{3} kg/m^{3}*\frac{4}{3}\pi*(0.905 \cdot 10^{-6} m)^{3} = 3.42 \cdot 10^{-15} kg [/tex]
Now, the terminal velocity of the bacterium is:
[tex] v = \frac{mg}{6\pi*\eta*r} = \frac{3.42 \cdot 10^{-15} kg*9.81 m/s^{2}}{6\pi*1.002 \cdot 10^{-3} kg/(m*s)*0.905 \cdot 10^{-6} m} = 1.96 \cdot 10^{-6} m/s [/tex]
Therefore, the terminal velocity of a spherical bacterium falling in the water is 1.96x10⁻⁶ m/s.
I hope it helps you!
A particle with charge q is to be brought from far away to a point near an electric dipole. Net nonzero work is done if the final position of the particle is on:__________
A) any point on the line through the charges of the dipole, excluding the midpoint between the two charges.
B) any point on a line that is a perpendicular bisector to the line that separates the two charges.
C) a line that makes an angle of 30 ∘ with the dipole moment.
D) a line that makes an angle of 45 ∘with the dipole moment.
Answer:
Net nonzero work is done if the final position of the particle is on options A, C and D
Explanation:
non zero work is done if following will be the final position of the charges :
A) Any point on the line through the charges of the dipole , excluding the midpoint between the two charges.
C) A line that makes an angle 30° with the dipole moment.
D) A line that makes an angle 45° with the dipole moment.
If the current flowing through a circuit of constant resistance is doubled, the power dissipated by that circuit will Group of answer choices
Answer:
P' = 4 P
Therefore, the power dissipated by the circuit will becomes four times of its initial value.
Explanation:
The power dissipation by an electrical circuit is given by the following formula:
Power Dissipation = (Voltage)(Current)
P = VI
but, from Ohm's Law, we know that:
Voltage = (Current)(Resistance)
V = IR
Substituting this in formula of power:
P = (IR)(I)
P = I²R ---------------- equation 1
Now, if we double the current , then the power dissipated by that circuit will be:
P' = I'²R
where,
I' = 2 I
Therefore,
P' = (2 I)²R
P' = 4 I²R
using equation 1
P' = 4 P
Therefore, the power dissipated by the circuit will becomes four times of its initial value.
A particle of charge = 50 µC moves in a region where the only force on it is an electric force. As the particle moves 25 cm, its kinetic energy increases by 1.5 mJ. Determine the electric potential difference acting on the partice
Answer:
nvbnncbmkghbbbvvvvvvbvbhgggghhhhb
If 2 balls had the same volume but ball a has twice as much mass as babil which one will have the greater density
5) What is the weight of a body in earth. if its weight is 5Newton
in moon?
Answer:
8.167
Explanation:
describe the relation among density, temperature, and volume when the pressure is constant, and explain the blackbody radiation curve
Answer:
in all cases with increasing temperature the density should decrease.
Black body radiation is a construction that maintains a constant temperature and a hole is opened, this hole is called a black body,
Explanation:
Let's start for ya dream gas
PV = nRT
Since it indicates that the pressure is constant, we see that the volume is directly proportional to the temperature.
The density of is defined by
ρ = m / V
As we saw that volume increases with temperature, this is also true for solid materials, using linear expansion. Therefore in all cases with increasing temperature the density should decrease.
Black body radiation is a construction that maintains a constant temperature and a hole is opened, this hole is called a black body, since all the radiation that falls on it is absorbed or emitted.
This type of construction has a characteristic curve where the maximum of the curve is dependent on the tempera, but independent of the material with which it is built, to explain the behavior of this curve Planck proposed that the diaconate in the cavity was not continuous but discrete whose energy is given by the relationship
E = h f
Consider the Earth and the Moon as a two-particle system.
Find an expression for the gravitational field g of this two-particle system as a function of the distance r from the center of the Earth. (Do not worry about points inside either the Earth or the Moon. Assume the Moon lies on the +r-axis. Give the scalar component of the gravitational field. Do not substitute numerical values; use variables only. Use the following as necessary: G, Mm, Me, r, and d for the distance from the center of Earth to the center of the Moon.)"
sorry but I don't understand
As an ice skater begins a spin, his angular speed is 3.14 rad/s. After pulling in his arms, his angular speed increases to 5.94 rad/s. Find the ratio of teh skater's final momentum of inertia to his initial momentum of inertia.
Answer:
I₂/I₁ = 0.53
Explanation:
During the motion the angular momentum of the skater remains conserved. Therefore:
Angular Momentum of Skater Before Pulling Arms = Angular Momentum of Skater After Pulling Arms
L₁ = L₂
but, the formula for angular momentum is:
L = Iω
Therefore,
I₁ω₁ = I₂ω₂
I₂/I₁ = ω₁/ω₂
where,
I₁ = Initial Moment of Inertia
I₂ = Final Moment of Inertia
ω₁ = Initial Angular Velocity = 3.14 rad/s
ω₂ = Final Angular velocity = 5.94 rad/s
Therefore,
I₂/I₁ = (3.14 rad/s)/(5.94 rad/s)
I₂/I₁ = 0.53
An ac circuit consist of a pure resistance of 10ohms is connected across an ae supply
230V 50Hz Calculate the:
(i)Current flowing in the circuit.
(ii)Power dissipated
Plz check attachment for answer.
Hope it's helpful
What is the relationship between the magnitudes of the collision forces of two vehicles, if one of them travels at a higher speed?
Explanation:
The collision forces are equal and opposite. Therefore, the magnitudes are equal.
When the charges in the rod are in equilibrium, what is the magnitude of the electric field within the rod?
Answer: If we have equilibrium, the magnitude must be zero.
Explanation:
If the charges are in equilibrium, this means that the total charge is equal to zero.
And as the charges must be homogeneously distributed in the rod, we can conclude that the electric field within the rod must be zero, so the magnitude of the electric field must be zero
Approximately what applied force is needed to keep the box moving with a constant velocity that is twice as fast as before? Explain
Complete question:
A force F is applied to the block as shown (check attached image). With an applied force of 1.5 N, the block moves with a constant velocity.
Approximately what applied force is needed to keep the box moving with a constant velocity that is twice as fast as before? Explain
Answer:
The applied force that is needed to keep the box moving with a constant velocity that is twice as fast as before, is 3 N
Force is directly proportional to velocity, to keep the box moving at the double of initial constant velocity, we must also double the value of the initially applied force.
Explanation:
Given;
magnitude of applied force, F = 1.5 N
Apply Newton's second law of motion;
F = ma
[tex]F = m(\frac{v}{t} )\\\\F = \frac{m}{t} v\\\\Let \ \frac{m}{t} \ be \ constant = k\\F = kv\\\\k = \frac{F}{v} \\\\\frac{F_1}{v_1} = \frac{F_2}{v_2}[/tex]
The applied force needed to keep the box moving with a constant velocity that is twice as fast as before;
[tex]\frac{F_1}{v_1} = \frac{F_2}{v_2} \\\\(v_2 = 2v_1, \ and \ F_1 = 1.5N)\\\\\frac{1.5}{v_1} = \frac{F_2}{2v_1} \\\\1.5 = \frac{F_2}{2}\\\\F_2 = 2*1.5\\\\F_2 = 3 N[/tex]
Therefore, the applied force that is needed to keep the box moving with a constant velocity that is twice as fast as before, is 3 N
Force is directly proportional to velocity, to keep the box moving at the double of initial constant velocity, we must also double the value of the applied force.
Bromine, a liquid at room temperature, has a boiling point
Yes it does ! The so-called "boiling point" is the temperature at which Bromine liquid can change state and become Bromine vapor, if enough additional thermal energy is provided. The boiling point is higher than room temperature.
A student is conducting an experiment that involves adding hydrochloric acid to various minerals to detect if they have carbonates in them. The student holds a mineral up and adds hydrochloric acid to it. The acid runs down the side and onto the student’s hand causing irritation and a minor burn. If they had done a risk assessment first, how would this situation be different? A. It would be the same, there is no way to predict the random chance of acid dripping off the mineral in a risk assessment. B. The student would have no injuries because he would know hydrochloric acid is dangerous and would be wearing gloves when using it. C. The student would be safer because he would have been wearing goggles, but his hand still would not have been protected. D. The student would not have picked up the mineral because he would know that some of the minerals have dangerous chemicals in them.
By the experiment "The student would have no injuries because he would know hydrochloric acid is dangerous and would be wearing gloves when using it. "
What is experiment ?An experiment would be a technique used to confirm or deny a hypothesis, as well as assess the likelihood or effectiveness of something that has never been tried before.
What is hydrochloric acid?Hydrochloric acid is a kind of compound in which hydrogen and chlorine element is present.
Maintain a safe distance between your hands and your body, mouth, eyes, as well as a face when utilizing lab supplies and chemicals.
By the experiment "By the experiment "The student would have no injuries because he would know hydrochloric acid is dangerous and would be wearing gloves when using it. "
To know more about experiment and hydrochloric acid
https://brainly.com/question/13770820
#SPJ3
Charge of uniform surface density (0.20 nC/m2) is distributed over the entire xy plane. Determine the magnitude of the electric field at any point having z
The question is not complete, the value of z is not given.
Assuming the value of z = 4.0m
Answer:
the magnitude of the electric field at any point having z(4.0 m) =
E = 5.65 N/C
Explanation:
given
σ(surface density) = 0.20 nC/m² = 0.20 × 10⁻⁹C/m²
z = 4.0 m
Recall
E =F/q (coulumb's law)
E = kQ/r²
σ = Q/A
A = 4πr²
∴ The electric field at point z =
E = σ/zε₀
E = 0.20 × 10⁻⁹C/m²/(4 × 8.85 × 10⁻¹²C²/N.m²)
E = 5.65 N/C
1) A net force of 75.5 N is applied horizontally to slide a 225 kg crate across the floor.
a. Compute the acceleration of the crate?
Answer:
The acceleration of the crate is [tex]0.3356\,\frac{m}{s^2}[/tex]
Explanation:
Recall the formula that relates force,mass and acceleration from newton's second law;
[tex]F=m\,a[/tex]
Then in our case, we know the force applied and we know the mass of the crate, so we can solve for the acceleration as shown below:
[tex]F=m\,a\\75.5\,N=225\,\,kg\,\,a\\a=\frac{75.5}{225} \,\frac{m}{s^2} \\a=0.3356\,\,\frac{m}{s^2}[/tex]
Four point charges have the same magnitude of 2.4×10^−12C and are fixed to the corners of a square that is 4.0 cm on a side. Three of the charges are positive and one is negative. Determine the magnitude of the net electric field that exists at the center of the square.
Answer:
7.2N/C
Explanation:
Pls see attached file
Two people play tug of war. The 100-kg person on the left pulls with 1,000 N, and the 70-kg person on the right pulls with 830 N. Assume that neither person releases their grip on the rope with either hand at any time, assume that the rope is always taut, and assume that the rope does not stretch. What is the magnitude of the tension in the rope in Newtons
Answer:
The tension on the rope is T = 900 N
Explanation:
From the question we are told that
The mass of the person on the left is [tex]m_l = 100 \ kg[/tex]
The force of the person on the left is [tex]F_l = 1000 \ N[/tex]
The mass of the person on the right is [tex]m_r = 70 \ kg[/tex]
The force of the person on the right is [tex]F_r = 830 \ N[/tex]
Generally the net force is mathematically represented as
[tex]F_{Net} = F_l - F_r[/tex]
substituting values
[tex]F_{Net} = 1000-830[/tex]
[tex]F_{Net} = 170 \ N[/tex]
Now the acceleration net acceleration of the rope is mathematically evaluated as
[tex]a = \frac{F_{net}}{m_I + m_r }[/tex]
substituting values
[tex]a = \frac{170}{100 + 70 }[/tex]
[tex]a = 1 \ m/s ^2[/tex]
The force [tex]m_i * a[/tex]) of the person on the left that caused the rope to accelerate by a is mathematically represented as
[tex]m_l * a = F_r -T[/tex]
Where T is the tension on the rope
substituting values
[tex]100 * 1 = 1000 - T[/tex]
=> T = 900 N
Two 60.o-g arrows are fired in quick succession with an initial speed of 82.0 m/s. The first arrow makes an initial angle of 24.0° above the horizontal, and the second arrow is fired straight upward. Assume an isolated system and choose the reference configuration at the initial position of the arrows.
(a) what is the maximum height of each of the arrows?
(b) What is the total mechanical energy of the arrow-Earth system for each of the arrows at their maximum height?
Answer:
a) The first arrow reaches a maximum height of 56.712 meters, whereas second arrow reaches a maximum height of 342.816 meters, b) Both arrows have a total mechanical energy at their maximum height of 201.720 joules.
Explanation:
a) The first arrow is launch in a parabolic way, that is, horizontal speed remains constant and vertical speed changes due to the effects of gravity. On the other hand, the second is launched vertically, which means that velocity is totally influenced by gravity. Let choose the ground as the reference height for each arrow. Each arrow can be modelled as particles and by means of the Principle of Energy Conservation:
First arrow
[tex]U_{g,1} + K_{x,1} + K_{y,1} = U_{g,2} + K_{x,2} + K_{y,2}[/tex]
Where:
[tex]U_{g,1}[/tex], [tex]U_{g,2}[/tex] - Initial and final gravitational potential energy, measured in joules.
[tex]K_{x,1}[/tex], [tex]K_{x,2}[/tex] - Initial and final horizontal translational kinetic energy, measured in joules.
[tex]K_{y,1}[/tex], [tex]K_{y,2}[/tex] - Initial and final vertical translational kinetic energy, measured in joules.
Now, the system is expanded and simplified:
[tex]m \cdot g \cdot (y_{2} - y_{1}) + \frac{1}{2}\cdot m \cdot (v_{y, 2}^{2} -v_{y, 1}^{2}) = 0[/tex]
[tex]g \cdot (y_{2}-y_{1}) = \frac{1}{2}\cdot (v_{y,1}^{2}-v_{y,2}^{2})[/tex]
[tex]y_{2}-y_{1} = \frac{1}{2}\cdot \frac{v_{y,1}^{2}-v_{y,2}^{2}}{g}[/tex]
Where:
[tex]y_{1}[/tex]. [tex]y_{2}[/tex] - Initial and final height of the arrow, measured in meters.
[tex]v_{y,1}[/tex], [tex]v_{y,2}[/tex] - Initial and final vertical speed of the arrow, measured in meters.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
The initial vertical speed of the arrow is:
[tex]v_{y,1} = v_{1}\cdot \sin \theta[/tex]
Where:
[tex]v_{1}[/tex] - Magnitude of the initial velocity, measured in meters per second.
[tex]\theta[/tex] - Initial angle, measured in sexagesimal degrees.
If [tex]v_{1} = 82\,\frac{m}{s}[/tex] and [tex]\theta = 24^{\circ}[/tex], the initial vertical speed is:
[tex]v_{y,1} = \left(82\,\frac{m}{s} \right)\cdot \sin 24^{\circ}[/tex]
[tex]v_{y,1} \approx 33.352\,\frac{m}{s}[/tex]
If [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v_{y,1} \approx 33.352\,\frac{m}{s}[/tex] and [tex]v_{y,2} = 0\,\frac{m}{s}[/tex], the maximum height of the first arrow is:
[tex]y_{2} - y_{1} = \frac{1}{2}\cdot \frac{\left(33.352\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}}{9.807\,\frac{m}{s^{2}} }[/tex]
[tex]y_{2} - y_{1} = 56.712\,m[/tex]
Second arrow
[tex]U_{g,1} + K_{y,1} = U_{g,3} + K_{y,3}[/tex]
Where:
[tex]U_{g,1}[/tex], [tex]U_{g,3}[/tex] - Initial and final gravitational potential energy, measured in joules.
[tex]K_{y,1}[/tex], [tex]K_{y,3}[/tex] - Initial and final vertical translational kinetic energy, measured in joules.
[tex]m \cdot g \cdot (y_{3} - y_{1}) + \frac{1}{2}\cdot m \cdot (v_{y, 3}^{2} -v_{y, 1}^{2}) = 0[/tex]
[tex]g \cdot (y_{3}-y_{1}) = \frac{1}{2}\cdot (v_{y,1}^{2}-v_{y,3}^{2})[/tex]
[tex]y_{3}-y_{1} = \frac{1}{2}\cdot \frac{v_{y,1}^{2}-v_{y,3}^{2}}{g}[/tex]
If [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]v_{y,1} = 82\,\frac{m}{s}[/tex] and [tex]v_{y,3} = 0\,\frac{m}{s}[/tex], the maximum height of the first arrow is:
[tex]y_{3} - y_{1} = \frac{1}{2}\cdot \frac{\left(82\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}}{9.807\,\frac{m}{s^{2}} }[/tex]
[tex]y_{3} - y_{1} = 342.816\,m[/tex]
The first arrow reaches a maximum height of 56.712 meters, whereas second arrow reaches a maximum height of 342.816 meters.
b) The total energy of each system is determined hereafter:
First arrow
The total mechanical energy at maximum height is equal to the sum of the potential gravitational energy and horizontal translational kinetic energy. That is to say:
[tex]E = U + K_{x}[/tex]
The expression is now expanded:
[tex]E = m\cdot g \cdot y_{max} + \frac{1}{2}\cdot m \cdot v_{x}^{2}[/tex]
Where [tex]v_{x}[/tex] is the horizontal speed of the arrow, measured in meters per second.
[tex]v_{x} = v_{1}\cdot \cos \theta[/tex]
If [tex]v_{1} = 82\,\frac{m}{s}[/tex] and [tex]\theta = 24^{\circ}[/tex], the horizontal speed is:
[tex]v_{x} = \left(82\,\frac{m}{s} \right)\cdot \cos 24^{\circ}[/tex]
[tex]v_{x} \approx 74.911\,\frac{m}{s}[/tex]
If [tex]m = 0.06\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{max} = 56.712\,m[/tex] and [tex]v_{x} \approx 74.911\,\frac{m}{s}[/tex], the total mechanical energy is:
[tex]E = (0.06\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (56.712\,m)+\frac{1}{2}\cdot (0.06\,kg)\cdot \left(74.911\,\frac{m}{s} \right)^{2}[/tex]
[tex]E = 201.720\,J[/tex]
Second arrow:
The total mechanical energy is equal to the potential gravitational energy. That is:
[tex]E = m\cdot g \cdot y_{max}[/tex]
[tex]m = 0.06\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex] and [tex]y_{max} = 342.816\,m[/tex]
[tex]E = (0.06\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (342.816\,m)[/tex]
[tex]E = 201.720\,J[/tex]
Both arrows have a total mechanical energy at their maximum height of 201.720 joules.
Which statement describes one feature of a mineral's definite chemical composition?
It always occurs in pure form.
It always contains certain elements.
It cannot form from living or once-living materials.
It cannot contain atoms from more than one element.
N
Answer:
It always contains certain elements
Explanation:
Minerals can be defined as natural inorganic substances which possess an orderly internal structural arrangement as well as a particular, well known chemical composition, crystal structures and physical properties. Minerals include; quartz, dolomite, basalt, etc. Minerals may occur in isolation or in rock formations.
Minerals contain specific, well known chemical elements in certain ratios that can only vary within narrow limits. This is what we mean by a mineral's definite chemical composition. The structure of these minerals are all well known as well as their atom to atom connectivity.
The statement describes one feature of a mineral's definite chemical composition - It always contains certain elements.
A mineral is a naturally occurring chemical compound, usually of a crystalline form.
A mineral has one specific chemical composition.chemical composition that varies within a specific limited range and the atoms that make up the mineral must occur in specific ratiosthe proportions of the different elements and groups of elements in the mineral.Thus, The statement describes one feature of a mineral's definite chemical composition - It always contains certain elements.
Learn more:
https://brainly.com/question/690965
An electron has an initial velocity of (17.1 + 12.7) km/s, and a constant acceleration of (1.60 × 1012 m/s2) in the positive x direction in a region in which uniform electric and magnetic fields are present. If = (529 µT) find the electric field .
Answer:
Explanation:
Since B is perpendicular, it does no work on the electron but instead deflects it in a circular path.
q = 1.6 x 10-19 C
v = (17.1j + 12.7k) km/s = square root(17.1² + 12.7²) = 2.13 x 10⁴ m/s
the force acting on electron is
F= qvBsinΦ
F= (1.6 x 10⁻¹⁹C)(2.13.x 10⁴ m/s)(526 x 10⁻⁶ T)(sin90º)
F = 1.793x 10⁻¹⁸ N
The net force acting on electron is
F = e ( E+ ( vXB)
= ( - 1.6 × 10⁻¹⁹) ( E + ( 17.1 × 10³j + 12.7 × 10³ k)X( 529 × 10⁻⁶ ) (i)
= ( -1.6 × 10⁻¹⁹ ) ( E- 6.7k + 9.0j)
a= F/m
1.60 × 10¹² i = ( -1.6 × 10⁻¹⁹ ) ( E- 6.9 k + 7.56 j)/9.11 × 10⁻³¹
9.11 i = - ( E- 6.7 k + 9.0 j)
E = -9.11i + 6.7k - 9.0j
Which jovian planet should have the most extreme seasonal changes? a. Saturn b. Neptune c. Jupiter d. Uranus
Answer:
D). Uranus.
Explanation:
Jovian planets are described as the planets which are giant balls of gases and located farthest from the sun which primarily include Jupiter, Saturn, Uranus, and Neptune.
As per the question, 'Uranus' is the jovian planet that would have the most extreme seasonal changes as its tilted axis leads each season to last for about 1/4 part of its 84 years orbit. The strong tilted axis encourages extreme changes in the season on Uranus. Thus, option D is the correct answer.
The buoyant force on an object placed in a liquid is (a) always equal to the volume of the liquid displaced. (b) always equal to the weight of the object. (c) always equal to the weight of the liquid displaced. (d) always less than the volume of the liquid displaced.
Answer:
(c) always equal to the weight of the liquid displaced.
Explanation:
Archimedes principle (also called physical law of buoyancy) states that when an object is completely or partially immersed in a fluid (liquid, e.t.c), it experiences an upthrust (or buoyant force) whose magnitude is equal to the weight of the fluid displaced by that object.
Therefore, from this principle the best option is C - always equal to the weight of the liquid displaced.
Stress is a factor that contributes to heart disease risk.true or false