Answers
Answer:
a. The limiting reactant is Ca(OH)₂
b. The theoretical yield of CaCl₂ is approximately 621.488 grams
c. The percentage yield of CaCl₂ is approximately 47.06%
Explanation:
a. The given chemical reaction is presented as follows;
Ca(OH)₂ + 2HCl → CaCl₂ + 2H₂O
Therefore;
One mole of Ca(OH)₂ reacts with two moles of HCl to produce one mole of CaCl₂ and two moles of water H₂O
The mass of HCl in an experiment, m₁ = 229.70 g
The mass of Ca(OH)₂ in an experiment, m₂ = 207.48 g
The molar mass of HCl, MM₁ = 36.458 g/mol
The molar mass of Ca(OH)₂, MM₂ =74.093 g/mol
The number of moles of HCl, present, n₁ = m₁/MM₁
∴ n₁ = m₁/MM₁ = 229.70 g/(36.458 g/mol) ≈ 6.3 moles
The number of moles of Ca(OH)₂, present, n₂ = m₂/MM₂
∴ n₂ = m₂/MM₂ = 207.48 g/(74.093 g/mol) ≈ 2.8 moles
The number of moles of Ca(OH)₂, present, n₂ = 2.8 moles
According the chemical reaction equation the number of moles of HCl the 2.8 moles of Ca(OH)₂ will react with, = 2.8 × 2 moles = 5.6 moles of HCl
Therefore, there is an excess HCl in the reaction and Ca(OH)₂ is the limiting reactant
b. According the chemical reaction equation the number of moles of CaCl₂ produced in he reaction by the 2.8 moles of Ca(OH)₂ = 2.8 × 2 moles = 5.6 moles of CaCl₂
The molar mass of CaCl₂ = 110.98 g/mol
The mass of the 5.6 moles of CaCl₂ = 5.6 moles × 110.98 g/mol ≈ 621.488 grams
The theoretical yield of CaCl₂ ≈ 621.488 grams
c. Given that the actual mass of CaCl₂ produced = 292.5 grams, we have;
The percentage yield of CaCl₂ = The actual yield/(The theoretical yield) × 100
∴ The percentage yield of CaCl₂ = (292.5 g)/(621.488 g) × 100 ≈ 47.0644646397%
The percentage yield of CaCl₂ ≈ 47.06%.
Related Questions
What can the period number of an element tell us about that element?
Answers
Answer:
All of the elements in a period have the same number of atomic orbitals.
Explanation:
Does anyone know how kinetic energy and crater diameter are related??
Answers
Answer:
Crater size is related to the mass and velocity of the impacting body. Mass and velocity can be combined to find the kinetic energy of an impactor. ... This fundamental physical relationship allows an estimate of impactor mass to be made from crater diameter.
Explanation:
Bombardier beetles release a burst of hot chemical spray with a popping sound. The chemical is sprayed from a structure present under the belly of the beetles.
Which is the likely advantage of such a behavior?
It allows the beetles to attract mates.
It allows the beetles to move obstacles out of their paths.
It allows the beetles to escape from predators.
It allows the beetles to stay warm in cold conditions.
Answers
It allows the beetles to escape from predators
why do atoms combine to form compund?
Answers
Answer:
See below
Explanation:
The following reasons tell why atom combine to form compounds:
1) They want to follow octet or duplet rule and attain the noble gas configuration.
2) They combine to form compounds because of the electrostatic attraction between them.
3) They form compounds to lower their energy and to become stable.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807What are the layers of earth including the lithosphere and the asthenosphere?
Answers
Answer:
The lithosphere is the solid, outer part of the Earth. The lithosphere includes the brittle upper portion of the mantle and the crust, the outermost layers of Earth's structure. It is bounded by the atmosphere above and the asthenosphere (another part of the upper mantle) below
Explanation:
They are, in order from the exterior to the interior – the crust, the mantle, the outer core, and the inner core.
write down the formula for B
example:
Hydrogen + Fluorine = Hydrogen Fluorine
help
Answers
Answer:
P³⁻ + Cl⁻ --> PCl₃
Explanation:
PCl₃: phosphorus trichloride. prefix in front of chloride is "tri"–meaning three.
Answer:
phosphorus + chlorine = phosphorus trichloride
(He asked for word equation)
Separation units often use membranes, absorbers, and other devices to reduce the mole fraction of selected constituents in gaseous mixtures. Consider a mixture of hydrocarbons that consists of 62 percent (by volume) methane, 28 percent ethane, and 10 percent propane. After passing through a separator, the mole fraction of the propane is reduced to 1 percent. The mixture pressure before and after the separation is 100 kPa. Determine the change in the partial pressures of all the constituents in the mixture.
Answers
Answer:
See explanation
Explanation:
We first obtain the mole fraction of propane at the start and end;
0.01 = x/0.62 + 0.28 + x
0.01[0.62 + 0.28 + x] = x
0.01[0.9 + x] =x
9 * 10^-3 + 0.0.1x = x
9 * 10^-3 = x - 0.0.1x
9 * 10^-3 = 0.99x
x = 9 * 10^-3/0.99
x = 9.09 * 10^-3
After
For methane
0.62/ 0.28 + 0.62 + 9.09 * 10^-3 = 0.68
For ethane
0.28/0.28 + 0.62 + 9.09 * 10^-3 =0.31
Change in partial pressure of methane = (0.68 - 0.62) * 100kPa = 6 kPa
Change in partial pressure of ethane = (0.31 - 0.28) * 100kPa = 3 kPa
Change in partial pressure of propane= (0.01 - 0.1) * 100kPa = -9 kPa
What is the formula unit for a compound made from Li and Cl? (5 points)
LiCl because the total negative charge on Cl is one.
LiCl because the total negative charge on Li is two.
Li2Cl because the total positive charge on Cl is one.
Li2Cl because the total positive charge on Li is two.
Answers
Answer:
LiCl because the total negative charge on Cl is one.
Explanation:
Lithium has a charge of 1+ and Chlorine has a charge of 1-.
There are two types of chemical compound one is covalent compound and other is ionic compound. LiCl because the total negative charge on Cl is one. The correct option is option A.
What is chemical Compound?
Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
Covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Ionic compounds are hard, these have higher melting and boiling point than the covalent compounds. Li act as cation Li⁺ and Cl act as Cl⁻. These two combine to form LiCl. LiCl is an ionic compound.
Therefore, LiCl because the total negative charge on Cl is one. The correct option is option A.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ5
The following symbol (<-->) means
Answers
Answer:
Greater than or less than
A friend tells you that's after a candle burn there is less matter than before the flame was lit is your friend correct explain why or why not
Answers
Answer:
See explanation
Explanation:
The law of conservation of matter states that "matter cannot be created or destroyed. In a physical change, substances can change form, but the total mass remains the same."(Virginia)
Hence, the quantity of matter present before and after the candle burn must remain the same in accordance with this law stated above.
Hence, my friend was not correct.
Which statement is true regarding nuclear power plants?
The disposal of radioactive wastes is an intended benefit.
Uranium mining is an intended benefit.
Damage caused to the environment is an unintended consequence.
The creation of large amounts of electricity is an unintended consequence.
Answers
but its c because it dealing with power
Explanation:
Drag each item to show if it is matter or not matter.
light bulb added to
sunlight
heat
lamp
matter
light bulb
not matter
Answers
In the Haber reaction shown below, _______?is the
limiting reactant if equal moles of each reactant are used.
3H2 + N2 -> 2NH3
Answers
Answer: hydrogen
Explanation:
An intravenous solution of mannitol is used as a diuretic to increase the loss of sodium and chloride by a patient. If a patient receives 30.0 mL of 25% (m/v) mannitol solution, how many grams of mannitol were given?
Answers
Answer:
Explanation:
25 % ( m / v ) mannitol solution means 25 gram in 100 cc of water
25 gram in 100 mL of water
grams of mannitol in 30 mL = 25 x 30 / 100
= 7.5 grams .
Suppose you crushed an antacid tablet before dissolving it in a glass of water. The crushed antacid tablet would:
a. take the same amount of time to dissolve as a whole antacid tablet.
b. dissolve more slowly than a whole antacid tablet.
c. take more time to dissolve than a whole antacid tablet.
d. dissolve more quickly than a whole antacid tablet.
Answers
Explanation:
dissolve more quickly than a whole antacid tablet.
Thread-like structures that are found in the nucleus of a cell that contains all DNA.
A.) DNA
B.) Genes
C.) Chromosomes
D.) Nucleus
Answers
Methanol, CH3OH, is the simplest of the alcohols. It is synthesized by the reaction of hydrogen and carbon monoxide. Write chemical reactions. If 500 mol of CO and 750 mol of H2 are present, which is the limiting reactant?
Answers
Answer:
The limiting reactant is H₂
Explanation:
The reaction of hydrogen (H₂) and carbon monoxide (CO) to produce methanol (CH₃OH) is the following:
2H₂(g) + CO(g) → CH₃OH(g)
From the balanced chemical equation, we can see that 1 mol of CO reacts wIth 2 moles of H₂. So, the stoichiometric ratio is:
2 mol H₂/1 mol CO = 2.0
We have 500 mol of CO and 750 mol of H₂, so we calculate the ratio to establish a comparison:
750 mol H₂/500 mol CO = 1.5
Since 2.0 > 1.5, we have fewer moles of H₂ than are needed to completely react with 500 moles of CO. In fact, we need 1000 moles of H₂ and we have 750 moles. So, the limiting reactant is H₂.
4 L of He gas is mixed with 2 L of Ne gas. What is the mole fraction of each component?
Answers
moles of He=4 L/22.4 L=0.1786 mol
moles of Ne=2 L/22.4 L=0.0893 mol
total moles of the gas mixture
=0.1786+0.0893
=0.2679 mol
mole fraction of He=0.1786 mol/0.2679 mol=0.6667
mole fraction of Ne=0.0893 mol/0.2679 mol=0.3333
1. List 3 physical and chemical phenomena
Answers
Answer:
Examples of chemical changes are burning, cooking, rusting, and rotting. Examples of physical changes are boiling, melting, freezing, and shredding. Often, physical changes can be undone, if energy is input.
Hope this helped.
If the sun is out all day, why is it not warm during an Arctic summer?
Answers
Answer:
The primary reason is that the sun is low on the horizon all day. Thus, solar energy needs to pass through more atmosphere to get to the ground.
Explanation:
Hope this helps. :)
Answer:
Most all of the visible light striking the snow or ice surface is reflected back without any particular preference for a single color. Most natural materials absorb some sunlight, which gives them their color. Clean snow, however, reflects most of the sunlight, creating a white appearance.
[ I commented on the other answer with the same little add-on, then I realised I could add an answer. Even though this is four days ago, meaning the person who asked the question doesn't need another answer, I hope to give someone else who might be looking at this some insight. ]
Scientists are now able to use the genetic code of organisms to find out more about their evolutionary history. How is this most likely to impact classification
Answers
The group of choices associated with the given question are as follows:
Organisms once thought to be unrelated may be found to be related.
Mode of nutrition of some organisms may change.
Organisms that do not have a backbone may develop one.
All multicellular organisms may be found to be prokaryotes
Answer:
The correct answer would be - Organisms once thought to be unrelated may be found to be related
Explanation:
Classification of the organisms is based on the shared characteristics and structural or environmental similarities of the organisms which are modified and evolved during the period of time. It is also known as life sciences evolve and genetic code provides more accurate information.
These evolutionary changes and will lead to certain organisms that are once thought to be unrelated organisms that may actually be related based on a genetic code. These codes have every small and accurate change that occurs and can also find out when these changes occured.
Calculate the heat absorbed when 68.8 g of ice at -30.0 c is converted to steam at 160 c
Answers
Answer: 219 kJ
Explanation:
The percentage composition of acetic acid is found to be 39.9% C, 6.7% H, and 53.4% O. What is the empirical formula of acetic acid?
Answers
Answer:
CH₂O
Explanation:
From the question given above, the following data were obtained:
Carbon (C) = 39.9%
Hydrogen (H) = 6.7%
Oxygen (O) = 53.4%
Empirical formula =?
The empirical formula of acetic acid can be obtained as follow:
C = 39.9%
H = 6.7%
O = 53.4%
Divide by their molar mass
C = 39.9 / 12 = 3.3
H = 6.7 / 1 = 6.7
O = 53.4 / 16 = 3.3
Divide by the smallest
C = 3.3 / 3.3 = 1
H = 6.7 / 3.3 = 2
O = 3.3 / 3.3 = 1
The empirical formula => CH₂O
2Na + 2H2O → 2NaOH+ H2
How many grams of sodium would be needed to produce 1.00kg of sodium hydroxide?
Answers
Answer:
575 g
Explanation:
1 kg of sodium hydroxide is 1000/40=25 mol.
So 25 mol of sodium will be needed.
25 mol of sodium is 575 g.
According to the stoichiometry of the given chemical equation, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
46 g sodium gives 80 g sodium hydroxide, thus 1000 g sodium hydroxide requires 46×1000/80=575 g sodium.
Thus, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ2
I can determine the molar mass of an element by looking on the Answer under the atomic mass for the element.
Answers
Answer:
YES that is the molar mass can be found as the atomic mass of a single atom, BUT when you get to larger molecules your molar mass will be a combination of atomic masses.
Explanation:
A B C D ............
Answers
Answer:
I think gamma, I'm not sure tho
What mass of methane (CH4) gas occupies a volume of 0,462 L at 1atm and 273K
Answers
Explanation:
Since methane gas is at 1 atm and 273 K, it is at standard temperature and pressure(STP).
One mole of every gas occupies 22.4 dm^3 at STP, and vice versa. So,
22.4 dm^3 at STP of CH4=1 mol=12+4(1)=16 g
0.462 L(0.462 dm^3) at STP of CH4
=(16 g×0.462 dm^3)/22.4 dm^3
=0.33 g
How many particles are in 1 mole of CO2?
Answers
What does the prefix “geo” mean?
Please Help
I will give you Brainlist
Answers
If you had 3.6 moles of AI(NO3)3, how many grams would you expect to have?
Answers
766.7856 g
Molecular weight of Aluminium Nitrate is 212.996 g/mol. 3.6 moles of Aluminium Nitrate is: 212.996 × 3.6 = 766.7856