In a series circuit . . .
-- The total resistance is the sum of the individual resistors.
-- The current is the same at every point in the circuit.
The total resistance in this circuit is (3Ω + 6Ω ) = 9Ω
The current at every point is (V/R) = (12v / 9Ω ) = 1.33 A .
Pick choice (a).
The current flowing through the 6 Ohms resistor is: a. 1.33 A
Given the following data:
Resistor A = 3 Ohms.Resistor B = 6 Ohms.Voltage = 12 Volts.To find the current flowing through the 6 Ohms resistor:
First of all, we would determine the total equivalent resistance of the resistors connected in series.
[tex]T_eq = Resistor \; A + Resistor\; B\\\\T_eq = 3 + 6[/tex]
Total equivalent resistance = 9 Ohms
Note: The current flowing through both resistors are the same since they are connected in series.
From Ohm's law, we have:
[tex]Current = \frac{Voltage}{Resistor}\\\\Current = \frac{12}{9}[/tex]
Current = 1.33 Amperes
Therefore, the current flowing through the 6 Ohms resistor is 1.33 Amperes.
how does temperature affect brownian motion
Answer: This (random) thermal motion of the particles due to the temperature is also called Brownian motion. ... The higher the temperature, the faster the diffusion will be, because the stronger the molecule movement and thus the “mixing”.
Explanation:
The terminal velocity of a person falling in air depends upon the weight and the area of the person facing the fluid. Find the terminal velocity (in meters per second and kilometers per hour) of an 86.0 kg skydiver falling in a pike (headfirst) position with a surface area of 0.145 m2. (Assume that the density of air is 1.21 kg/m3 and the drag coefficient of a skydiver in a pike position is 0.7. For each answer, enter a number.)
Answer:
terminal velocity is;
v = 117.54 m/s
v = 423.144 km/hr
Explanation:
Given the data in the question;
we know that, the force on a body due to gravity is;
[tex]F_g[/tex] = mg
where m is mass and g is acceleration due to gravity
Force of drag is;
[tex]F_d[/tex] = [tex]\frac{1}{2}[/tex]pCAv²
where p is the density of fluid, C is the drag coefficient, A is the area and v is the terminal velocity.
Terminal velocity is reach when the force of gravity is equal to the force of drag.
[tex]F_g = F_d[/tex]
mg = [tex]\frac{1}{2}[/tex]pCAv²
we solve for v
v = √( 2mg / pCA )
so we substitute in our values
v = √( [2×(86 kg)×9.8 m/s² ] / [ 1.21 kg/m³ × 0.7 × 0.145 m²] )
v = √( 1685.6 / 0.122015 )
v = √( 13814.6949 )
v = 117.54 m/s
v = ( 117.54 m/s × 3.6 ) = 423.144 km/hr
Therefore terminal velocity is;
v = 117.54 m/s
v = 423.144 km/hr
Which of the following electromagnets is the strongest? Why?
Answer:
Bitter Magnet inside a superconducting magnet
Explanation:
Since there are no options available, generally, the electromagnet that is considered the strongest is the Bitter Magnet inside a superconducting magnet.
This electromagnet produces 45 Tesla units which is a result of bitter magnet producing 33.5 Tesla and the superconducting coil produces the additional 11.5 Tesla.
Hence, justifying that the greater the current in the coil the stronger the electromagnet.
A wave has a wavelength of 1.5 meters and frequency of 125 Hz. What is the wave speed?
What is a overly-simplified definition of Einstein's theory of general relativity?
Answer:
the laws of physics are the same for all non-accelerating observers
Explanation:
Particles q1, 92, and q3 are in a straight line.
Particles q1 = -5.00 x 10-6 C,q2 = -5.00 x 10-6 C,
and q3 = -5.00 x 10-6 C. Particles q1 and q2 are
separated by 0.500 m. Particles q2 and q3 are
separated by 0.250 m. What is the net force on 92?
Remember: Negative forces (-F) will point Left
Positive forces (+F) will point Right
-5.00 x 10-6 C
-5.00 x 10-6
-5.00 x 10-6 C
91
92
93
0.500 m
0.250 m
q1 = -5.00 x 10-6 C
q2 = -5.00 x 10-6 C
q3 = -5.00 x 10-6 C
E1 = kq/r^2 = ( 9 x 10^9)( 5 x 10^-6)/(0.5^2) = 180000 N/C to the left
E2 = kq/r^2 = ( 9 x 10^9)( 5 x 10^-6)/(0.25^2) = 720000 N/C to the right
E net = 720000 - 180000 = 540000 N/C to the right
F = qE
F = (-5 x 10^6 C)(540000 N/C) = - 2.7 N
The force on q2 is 2.7 N to the left.
The net electrostatic force on the q2 is 2.7N owards left
The equation for electrostatic force is
[tex]F= k\frac{q_{1}q_{2} }{r^{2} }[/tex]
where k = [tex]9*10^{9} Nm^{2}/C^{2}[/tex] and r is the distance separating charges q1 and q2.
the force has to be calculated on a charge q2 = -5.0 ×[tex]10^{-6}[/tex] C by the charges q1= -5.0 ×[tex]10^{-6}[/tex] C and q3= -5.0 ×[tex]10^{-6}[/tex] C
distance between q1 and q2 is 0.5 m = 5×[tex]10^{-1}[/tex]m
distance between q2 and q3 is 0.25 m = 25×[tex]10^{-2}[/tex]m
force due to charge q1
[tex]F_{1}[/tex] = 9×[tex]10^{9}[/tex]×(-5)×(-5)×[tex]10^{-12}[/tex]/25×[tex]10^{-2}[/tex] N = +0.9N = 0.9N towards right
[tex]F_{2}[/tex] = 9×[tex]10^{9}[/tex]×(-50)×(-4)×[tex]10^{-12}[/tex]/625×[tex]10^{-4}[/tex] N = -3.6N = 3.6N towards left
hence net force F = [tex]F_{1}+F_{2}[/tex]
= 0.9N - 3.6N = -2.7N
F = 2.7 N towards left
Learn more about electrostatic force:
https://brainly.com/question/11375177
What is the displacement for a driver who travels 10 km to get to a point that is 4 km from his starting point?
4 km
10 km
6 km
14 km
Answer:
6km
Explanation:
Classes are canceled due to snow, so you take advantage of the extra time to conduct some physics experiments. You fasten a large toy rocket to the back of a sled and take the modified sled to a large, flat, snowy field. You ignite the rocket and observe that the sled accelerates from rest in the forward direction at a rate of 11.5 m/s^2 for a time period of 3.30 s. After this time period, the rocket engine abruptly shuts off, and the sled subsequently undergoes a constant backward acceleration due to friction of 4.15 m/s^2.
Required:
a. After the rocket turns off, how much time does it take for the sled to come to a stop?
b. By the time the sled finally comes to a rest, how far has it traveled from its starting point?
Answer:
a) t = 9.2s
b) Δx = 242.2 m
Explanation:
a)
In order to find the time that the sled traveled since the rocket was turned off, we need to find the first the speed that it had at that moment.Applying the definition of accceleration, since we know that the sled started from rest, we can find the value of the final speed (for this part) as follows:[tex]v_{f1} = a_{1} * t_{1} = 11.5m/s2* 3.30 s = 38.0 m/s (1)[/tex]
This speed, is just the initial speed for the second part, so we can find the time traveled from the moment the rocket was turned off until it came to an stop, as follows:[tex]t_{2} = \frac{v_{f1}}{a_{2} } = \frac{38m/s}{4.15m/s} = 9.2 s (2)[/tex]
b)
We need to find find first the displacement when the sled was accelerating.Assuming the acceleration is constant, since it started from rest, we can use the following kinematic equation:[tex]v_{f1} ^{2} = 2* a_{1} * x_{1} (3)[/tex]
Solving for x₁:[tex]x_{1} =\frac{v_{f1}^{2} }{2*a_{1}} =\frac{(38m/s)^{2} }{2*11.5m/s2} =62.8 m (4)[/tex]
In the same way, we can use the same equation, replacing the values of the final speed (which becomes zero), initial speed (which is the same as vf1), and a, which becomes -4.15 m/s2 as it is backwards.[tex]-v_{f1} ^{2} = 2* a_{2} * x_{2} (5)[/tex]
Solving for x₂:[tex]x_{2} =\frac{-v_{f1}^{2} }{2*a_{2}} =\frac{-(38m/s)^{2} }{2*(-4.15m/s)^2} =174.0 m (6)[/tex]
Δx = x₁ + x₂ = 68.2 m + 174.0 m = 242.2 m (7)a toy of mass 600 is whirled by a child in a horizontal circle using a string of length 2m with a linear speed of 5 m/s determine the angular velocity of the toy?
Explanation:
angular velocity = velocity/radius
= 5/2
= 2.5 rad/s
Which formula is used to find an object's acceleration?
a= Δt – Δν
a= Δv + Δt
a= Δv/ Δt
a= Δt/Δv
Answer:
its the third one
12. An organ pipe that is 1.75 m long and open at both ends produces sound of
frequency 303 Hz when resonating in its second overtone. What is the speed of
sound in the room?
295 m/s
328 m/s
354 m/s
389 m/s
401 m/s
Answer:
354 m/s
Explanation:
For the second overtune (Third harmonic) of an open pipe,
λ = 2L/3................................ Equation 1
Where L = Length of the open pipe, λ = Wave length.
Given: L = 1.75 m.
Substitute into equation 1
λ = 2(1.75)/3
λ = 1.17 m.
From the question,
V = λf.......................... Equation 2
V = speed of sound in the room, f = frequency
Given: f = 303 Hz.
Substitute into equation 2
V = 1.17(303)
V = 353.5
V ≈ 354 m/s
Hence the right answer is 354 m/s
After supper, your mother runs the warm pan under cold water. The pan cools off quickly. This is an example of -
conduction
convection
radiation
Answer:
conduction (the heat is transferring to the air)
Question 11 of 15
Which of the following compounds is carbon tetrahydride?
A. CaH4
B. CH4
C. CaH
D. CAH
the correct answer would be "B"
The only way that heat can travel through outer space is ______
convection
radiation
conduction
none of the above
plssssssssssss answer correctly
Question 9 of 15
Locate the polyatomic ion in the compound MgSO4-
A. Mgs
B. o
C. Mg
D. SO4
Answer:
d
Explanation:
HELP PLS!!!!!!! 20 POINTS
Answer:
Cayla ? please whats going on ?
Explanation:
A load of mass 120kg is raised
vertically through a height of 2m in
30s by a machine whose efficiency,
is 100% Calculate the power generated
by the machine
Answer: P = 120 kg·9.81 m/s² · 2 m / 30 s = 78 W
Explanation: power P = Work done / time
Work is lifting work = mgh in which g = 9.81 m/s²
Time 30 s
This is one popular brand of exercise machine for a crossword puzzle
Answer:
Aerobics I think.
Explanation:
What are examples of water on Earth that are part of the water cycle
Which of the following explains a projectile's parabolic motion? Choose all that apply
The law of inertia
acting on the x axis
The acceleration on
the x axis
The applied force
keeping the
projectile moving
The downward
force of gravity
5
Select the correct answer.
What is the current in a parallel circuit which has two resistors (17.2 ohms and
22.4 ohms) and a power source of 6.0 volts?
ОА.
0.30 amps
OB.
9.8 amps
OC.
0.61 amps
D.
1.2 amps
Reset
Next
Answer:
Current in a parallel circuit = 0.61 amps (Approx)
Explanation:
Given:
Voltage V = 6 volt
Two resistors = 17.2 , 22.4 in parallel circuit
Find:
Current in a parallel circuit
Computation:
1/R = 1/r1 + 1 / r2
1/R = 1/17.2 + 1 / 22.4
R = 9.73 ohms (Approx)
Current in a parallel circuit = V / R
Current in a parallel circuit = 6 / 9.73
Current in a parallel circuit = 0.61 amps (Approx)
PLESE HELP !!!!!!!!!
What is the dependent variable of this testable question? How does the temperature of a tennis ball affect the height of its bounce?
Question 2 options:
brand of tennis balls
the age of the tennis ball
temperature of a tennis ball
height of its bounce
ILL GIVE BRANLIEST TO THE CORRECT ONE
Answer:
Height of its bounce
Explanation:
The dependent variable is always what is being measured or the data collected.
You are called as an expert witness to analyze the following auto accident: Car B, of mass 2100 kg, was stopped at a red light when it was hit from behind by car A, of mass 1500 kg. The cars locked bumpers during the collision and slid to a stop. Measurements of the skid marks left by the tires showed them to be 7.30 m long, and inspection of the tire tread revealed that the coefficient of kinetic friction between the tires and the road was 0.65.
(a) What was the speed of car A just before the collision?
(b) If the speed limit was 35 mph, was car A speeding, and if so, by how many miles per hour was it exceeding the speed limit?
Answer:
Explanation:
Force of friction at car B ( break was applied by car B ) =μ mg = .65 x 2100 X 9.8 = 13377 N .
work done by friction = 13377 x 7.30 = 97652.1 J
If v be the common velocity of both the cars after collision
kinetic energy of both the cars = 1/2 ( 2100 + 1500 ) x v²
= 1800 v²
so , applying work - energy theory ,
1800 v² = 97652.1
v² = 54.25
v = 7.365 m /s
This is the common velocity of both the cars .
To know the speed of car A , we shall apply law of conservation of momentum .Let the speed of car A before collision be v₁ .
So , momentum before collision = momentum after collision of both the cars
1500 x v₁ = ( 1500 + 2100 ) x 7.365
v₁ = 17.676 m /s
= 63.63 mph .
( b )
yes Car A was crossing speed limit by a difference of
63.63 - 35 = 28.63 mph.
(a) The speed of car A just before the collision is 51.58 mph.
(b) With the given speed limit of 35 miles per hour, car A was crossing the speed limit by 16.58 mph.
What is collision?
The event when two objects strike each other from either direction, then such event is known as a collision. During the collision, the speed of colliding objects may vary according to the direction of the approach.
Given data -
The mass of car A is, mA = 1500 kg.
The mass of car B is, mB = 2100 kg.
The length of the skid mark is, d = 7.30 m.
The coefficient of kinetic friction between tires and road is, [tex]\mu = 0.65[/tex].
(a)
The combined kinetic energy of both cars is,
[tex]KE_{T}=\dfrac{1}{2} (mA+mB)v^{2}\\\\KE_{T}=\dfrac{1}{2} (1500+2100)v^{2}\\\\KE_{T}=1800v^{2}[/tex]
Applying the work-energy principle as,
Work done due to kinetic friction = Combined kinetic energy of cars
[tex]F \times d = KE_{T}\\\\(\mu \times (mA+mB)\times g) \times d = KE_{T}\\\\(0.65 \times (1500+2100)\times 9.8) \times 7.30 = 1800v^{2}\\\\v = 9.64 \;\rm m/s[/tex]
Converting into mph as,
[tex]v = 9.64 \times 2.23\\\\v = 21.49 \;\rm mph[/tex]
To know the speed of car A , we shall apply the law of conservation of momentum. Let the speed of car A before collision be v₁.
So , momentum before collision = momentum after collision of both the cars
1500 x v₁ = ( 1500 + 2100 ) x 21.49
v₁ = 51.58 mph
Thus, we can conclude that the speed of car A just before the collision is 51.58 mph.
(b)
With the given speed limit of 35 mph, the obtained speed of car A before the collision is 51.58 mph. Clearly, car A is crossing the speed limit. And the difference is,
= 51.58 - 35 = 28.63 mph.
= 16.58 mph
Thus, we can conclude that car A was crossing the speed limit by 16.58 mph.
Learn more about the average speed here:
https://brainly.com/question/12322912
1. A silicon BJT is connected as shown in Fig 1, where RC = 3.6 k 2. VBE = 0.8 V. (10%)
(a) Predict Ic and specify Rp to establish Vce at 5 V.(5%)
(b) The BJT is said to be in forward-reverse bias. Explain what is meant by this. (5%)
Answer:
The circuit is missing attached below is the required circuit
answer :
a) Ic = 1.944 mA
Rp = 288.66 kΩ
b) The Emitter-base Junction of the BJT is forward biased while its collector-base junction is reverse biased
Explanation:
Rc = 3.6 kΩ
VBE = 0.8 v
1) predict Ic and specify Rp to establish Vce at 5 V
we will apply Kirchhoff's voltage law to resolve this
solution attached below
b ) The BJT is said to be in Forward reverse bias because The Emitter-base Junction of the BJT is forward biased while its collector-base junction is reverse biased
An elevator suspended by a vertical cable is moving downward at a constant speed. The tension in the cable must be A) greater than the weight of the elevator. B) less than the weight of the elevator. C) equal to the weight of the elevator.
Answer:
(C) because the elevator is not accelerating
Note F = M a = M g (the resultant force on the elevator is due to gravity)
or Fup = Fc the force exerted on the elevator by the cable
and Fdown = Fe the force exerted on the elevator by gravity
F = M a = Fup - Fdown = zero resultant force on elevator
2) How much work is required to pull a sled 15
meters if you use 30N of force?
2 people
Explanation:
A physics major is working to pay her college tuition by performing in a traveling carnival. She rides a motorcycle inside a hollow, transparent plastic sphere. After gaining sufficient speed, she travels in a vertical circle with a radius of 15.0 m. She has a mass of 80.0 kg and her motorcycle has mass 30.0 kg. What minimum speed must she have at the top of the circle for the motorcycle tires to remain in contact with the sphere
Answer:
v = 12.1 m/s
Explanation:
When at the top of the circle, there are two forces acting on the combined mass of the rider and the motorcycle.These are the force of gravity (downward) and the normal force, which is directed from the surface away from it, perpendicular to the surface.In this case, as the motorcycle runs in the interior of the circle, at the top point this force is completely vertical, and is also downward.Since the motorcycle is moving in a vertical circle, there must be a force, keeping the object moving around a circle.This force is the centripetal force, aims towards the center of the circle, and is just the net force aiming in this direction at any point.At the top point, this force is just the sum of the normal force and the weight of the mass of the rider and the motorcycle combined, as follows (we take the direction towards the center as positive):[tex]F_{c} = N + m*g (1)[/tex]
Now, we know that the centripetal force is related with the tangential speed at this point and the radius of the circle as follows:[tex]F_{c} = m*\frac{v^{2}}{r} (2)[/tex]
Since the normal force takes any value as needed to make (1) equal to (2), if the speed diminishes, it will be needed less force to keep the equality valid.In the limit, when the motorcyvle tires barely touch the surface, this normal force becomes zero.In this condition, from (1) and (2), we can find the minimum possible value of the speed that still keeps the motorcycle touching the surface, as follows:[tex]v_{min} =\sqrt{r*g} =\sqrt{15.0m*9.8m/s2} = 12.1 m/s (3)[/tex]A pinball machine uses a spring that is compressed 4.0 cm to launch a
ball. If the spring constant is 13 N/m, what is the force on the ball at the
moment the spring is released?
Answer: 0.52N
Explanation:
Formula
F=ke
Givens
e= 4.0cm>>>0.04m
k=13N/m
Plug givens into formula
F= (13N/m)(0.04m)
F=0.52N
The force on the ball at the moment the spring is released will be F =0.52N
What is a spring force ?When a spring is stretched or compressed , it displaces from equilibrium position . As a result , a restoring force will act ( which act opposite to the direction of force applied on the string ) and tends to retract the spring back to its original position . The force is called spring force
Given
x = 4cm = 0.04 m
spring constant is(k) = 13 N/m
F( spring force on the ball ) = ?
F = -k x
F = -(13)(.04)
F ( spring force) = - 0.52N
The force on the ball at the moment the spring is released will be F =0.52N
learn more about spring force
https://brainly.com/question/14655680?referrer=searchResults
#SPJ3
tank contains 335 kg of water at a uniform temperature of 60oC. The tank is insulated and not heated; it neither loses nor gains heat through the walls of the tank. A valve is opened and water exits the tank at a rate of 0.5 kg/sec and a temperature of 60oC. After 10 seconds the valve is closed again . Using the assumption that water at zero degrees centigrade contains zero energy and considering only internal, how much energy left the tank through the valve during this 10 second period; report as kJ.
Answer:
Explanation:
Thermal energy or internal energy gain or loss = mass x specific heat x temperature
specific heat of water = 4.2 kJ / kg degree Celsius
mass of water lost in 10 second = rate of loss x time = .5 x 10 = 5 kg .
heat energy associated with lost water = 5 x 4.2 x ( 60 - 0 ) = 1260 kJ .
Heat energy lost = 1260 kJ .
What happens to the energy of a rubber band when it is stretched?