two identical balls are rolling down a hill ball 2 is rolling faster than ball 1 which ball has more kinetic energy

Answer:

Chemical energy

Explanation:

The energy in the torch is stored as chemical energy before the torch gets switch on.

The chemical energy energy in the battery of cell will power the cell and allows it to produce light.

Answer:

Follows are the solution to this question:

Explanation:

Please find the correct question in the attachment file.

Let:

[tex]\overrightarrow{R}= R_i\hat{i}+R_j\hat{j}+R_k\hat{k}\\\\\overrightarrow{S}= S_i\hat{i}+S_j\hat{j}+S_k\hat{k}\\\\[/tex]

Calculating the value of  [tex]\overrightarrow{R} \times \overrightarrow{S}:[/tex]

[tex]\to \left | \begin{array}{ccc}\hat{i}&\hat{j}&\hat{K}\\R_i&R_j&R_k\\S_i&S_j&S_k\end{array}\right | = \hat{i}[R_j S_k-S_jR_k]-\hat{j}[R_i S_k-S_iR_k]+\hat{k}[R_i S_j-S_iR_j][/tex]

Calculating the value of [tex]\overrightarrow{R} \cdot (\overrightarrow{R} \times \overrightarrow{S}):[/tex]

[tex]\to (R_i\hat{i}+R_j\hat{j}+R_k\hat{k}) \cdot ( \hat{i}[R_j S_k-S_jR_k]-\hat{j}[R_i S_k-S_iR_k]+\hat{k}[R_i S_j-S_iR_j])[/tex]

by solving this value it is equal to 0.

Answer:

The Answer is B)0.2 kg • m/s

Explanation:

I made a 100 on my test. Sorry if I'm late but hope I helped.

Answer:

B. 0.2 kg x m/s

Explanation:

Answer:

average speed is 1 m/s and average velocity is 0 m/s.

Explanation:

Given that :

Length of round trip = 50 m

Time taken = 100 seconds

The average speed :

Total distance / total time taken

Length of complete round trip :

(50 + 50) m, total. Distance = 100 m

100 / 100 = 1m/s

The average velocity :

Total Displacement / total time taken

Total Displacement of round trip = end point - start point = 0

0 / 100 = 0

Average speed is 1 m/s and average velocity is 0 m/s.

The average speed is defined as the ratio of distance to time. Speed is a scalar quantity hence it does not take direction into account while velocity is a vector quantity hence it takes direction into account.

The speed is obtained from;

Speed = Distance/time = 2(50 m)/100 s = 1 m/s.

The velocity is 0 m/s since it is complete round-trip lap.

Learn more about speed: https://brainly.com/question/7359669

Answer:

40 N

Explanation:

According to the scenario, computation of given data are as follows:

Mass (m) = 20 kg

Initially moving (v) = 3

Actual distance (d) = 2.25 m

So, we can calculate friction (f) by using following formula,

f × d = [tex]\frac{1}{2} mv^{2}[/tex]

By putting the value, we get

f × 2.25 = [tex]\frac{1}{2}[/tex] × 20 × [tex]3^{2}[/tex]

f × 2.25 = 10 × 9

f = 90 ÷ 2.25

= 40 N.

Answer:

Explanation:

The mass falls by .33 m before it begins to rise . At that point loss of potential energy is equal to gain of elastic energy .

1/2 k x² = mgx

.5 x k x .33² = m x 9.8 x .33

k / m = 59.4

frequency of oscillation =  [tex]\frac{1}{2\pi} \times\sqrt{\frac{k}{m} }[/tex]

= [tex]\frac{1}{2\pi} \times\sqrt{59.4}[/tex]

= 1.22 per second .

Answer:

c

Explanation:

a vector quantity has both magnitude and direction

The value of  20m/s, east is a vector quantity is Hence, option (C) is correct.

A physical quantity that has both directions and magnitude is referred to as a vector quantity.

A lowercase letter with a "hat" circumflex, such as "û," is used to denote a vector with a magnitude equal to one. This type of vector is known as a unit vector.

Given values  200V, 100kg/m, 50J/(kg°C) are denoting magnitude of different physical quantity. Hence, they and scalar quantity ( Physical quantities with merely magnitude and no direction are referred to as scalar quantities. These physical quantities can be explained just by their numerical value without any further guidance.).

But The value of  20m/s, east has a magnitude of 20 m/s and a direction along east. Hence, 20m/s, east denotes a  vector quantity is Hence, option (C) is correct.

Learn more about vector quantity here:

https://brainly.com/question/774036

#SPJ2

Answer:planning

Explanation:

The person is in the stage of planning due to its action of planning to be active.

The person is in the planning stage among the five stages of change for physical activity because the person just started planning to be active not yet started the activity. If a person is in the state of looking thoughtfully at something for a very long time then it is said to be Contemplation.

While on the other hand, if a person is in a stage in which there is no intention to change behavior in the foreseeable future then it is called precontemplation so we can conclude that the person is in the stage of planning due to its action of planning to be active.

Learn more about physical activity here: https://brainly.com/question/1561572

Answer:

Explanation:

C 200÷100=2

Output ÷ Input= MA

Complete Question

A ball having mass 2 kg is connected by a string of length 2 m to a pivot point and held in place in a vertical position. A constant wind force of magnitude 13.2 N blows from left to right. Pivot Pivot F F (a) (b) H m m L L If the mass is released from the vertical position, what maximum height above its initial position will it attain? Assume that the string does not break in the process. The acceleration of gravity is 9.8 m/s 2 . Answer in units of m.What will be the equilibrium height of the mass?

Answer:

[tex]H_m=1.65m[/tex]

[tex]H_E=1.16307m[/tex]

Explanation:

From the question we are told that

Mass of ball [tex]M=2kg[/tex]

Length of string [tex]L= 2m[/tex]

Wind force [tex]F=13.2N[/tex]

Generally the equation for [tex]\angle \theta[/tex] is mathematically given as

[tex]tan\theta=\frac{F}{mg}[/tex]

[tex]\theta=tan^-^1\frac{F}{mg}[/tex]

[tex]\theta=tan^-^1\frac{13.2}{2*2}[/tex]

[tex]\theta=73.14\textdegree[/tex]

Max angle =[tex]2*\theta= 2*73.14=>146.28\textdegree[/tex]

Generally the equation for max Height [tex]H_m[/tex] is mathematically given as

[tex]H_m=L(1-cos146.28)[/tex]

[tex]H_m=0.9(1+0.8318)[/tex]

[tex]H_m=1.65m[/tex]

Generally the equation for Equilibrium Height [tex]H_E[/tex] is mathematically given as

[tex]H_E=L(1-cos73.14)[/tex]

[tex]H_E=0.9(1+0.2923)[/tex]

[tex]H_E=1.16307m[/tex]

Answer: F = 498.04 lbs

Explanation: The forces acting on the sled and Julie are show in the figure below. In it, we notice that, for the sled and Julie to go accross the field, they only need force of friction, because, force of friction is a force that resists the relative motion of surfaces.

Force of friction is given by the formula

[tex]F_{f}=\mu.F_{N}[/tex]

where

μ is coefficient of friction

[tex]F_{N}[/tex] is normal force

Normal force is the force the surface exerts on the object. It is always perpendicular and a force of contact.

In the case of the sled, since it is on a horizontal plane, Normal Force has the same magnitude of Gravitational Force. So

[tex]F_{N}=m.g[/tex]

Coefficient of friction is how much friction exists between two surfaces.

Rearraging friction force is

[tex]F_{f}=\mu.m.g[/tex]

Mass for this system is the sum of Julie and the sled, therefore

m = 109 + 12

m = 121 lb

Calculating Friction Force:

[tex]F_{f}=0.42.121.9.8[/tex]

[tex]F_{f}=[/tex] 498.04 lbs

LBS is a unit of measurement referred as pound by weight.

In conclusion, force Mary needs to start moving the sled is 498.04 lbs

Answer:

electrons are located around the nucleus of an atom.

Explanation:

Electron configurations describe where electrons are located around the nucleus of an atom. For example, the electron configuration of lithium, 1s²2s¹, tells us that lithium has two electrons in the 1s subshell and one electron in the 2s subshell.

Answer:

1/9

Explanation:

Let A denote the bigger piece and let B denote the smaller piece.

We are told that one with three times the mass of the other.

Therefore, we have;

M_a = 3M_b

Firecracker is placed in the block and it explodes and thus, momentum is conserved.

Thus;

V_ai = V_bi = 0

Where V_ai is initial velocity of piece A and V_bi is initial velocity of piece B.

Since initial momentum equals final momentum, we have;

P_i = P_f

Thus;

0 = (M_a × V_af) + (M_b × V_bf)

Since M_a = 3M_b, we have;

(3M_b × V_af) + (M_b × Vbf) = 0

Making V_af the subject, we have;

V_af = -⅓V_bf

The kinetic energy gained by each block during the explosion will later be lost due to the negative work done by friction. Thus;

W_f = -½M_b•(v_bf)²

Now, let's express the work is in terms of the force and the distance.

Thus;

W_f = F_f × Δx × cos 180°

Frictional force is also expressed as μmg

Thus;

W_f = -μM_b × g × Δx

Earlier, we saw that;

W_f = -½M_b•(v_bf)²

Thus;

-½M_b•(v_bf)²= -μM_b × g × Δx

Δx = (v_bf)²/2μg

Let the distance travelled by block A be Δx_a and that travelled by B be Δx_b

Thus;

Δx_a/Δx_b = ((v_ba)²/2μg)/((v_bf)²/2μg)

Δx_a/Δx_b = ((v_af)²/((v_bf)²)

Δx_a/Δx_b = (-⅓V_bf)²/(V_bf)²

Δx_a/Δx_b = 1/9

Answer:

cognitive, humanistic, behavioral, sociocultural

Explanation:

Behavioral, sociocultural, cognitive, and humanistic are approaches to psychological science.

Psychology is a term to refer to the discipline that focuses on the study of various topics related to human thought such as:

Due to the above, several subdisciplines have emerged that focus on the study of each of the topics. For example:

Behavioral psychology: focused on the study of human behavior.

Sociocultural psychology: focused on the study of human behavior and thought in different social situations.

Cognitive psychology: focused on mental processes related to learning.

Humanistic psychology: focused on the study of human thought from a comprehensive approach.

According to the above, options A, E, F, and G are correct because they mention different sub-disciplines of psychology while the other options mention terms that are not related to sub-disciplines or psychological sciences.

Learn more in: https://brainly.com/question/9807106

Answer:

b. Designing an uncontrolled experiment.

Explanation:

They always have it controlled.

Answer:

B. Designing an uncontrolled experiment.

Explanation:

Correct Answer!!!!!!

Answer:

550V

Step  - Down transformer

Explanation:

Given parameters:

Number of turns in primary coil  = 300 turns

Secondary turns  = 120 turns

Output voltage  = 220V

Unknown:

Input voltage  = ?

Type of transformer =  ?

Solution:

To solve this problem, we use the expression below:

    [tex]\frac{V_{out} }{V_{in} }[/tex]    = [tex]\frac{Ns}{Np}[/tex]  

So insert the parameters and find Vin;

      [tex]\frac{220}{Vin}[/tex]   = [tex]\frac{120}{300}[/tex]  

    120Vin  = 220 x 300

           Vin  = [tex]\frac{220 x 300}{120}[/tex]   = 550V

Since the input voltage is greater than the output voltage, this is step - down transformer.

Answer:

A. Gamma decay

Explanation:

A form of nuclear decay in which the atomic number is unchanged is a gamma decay.

The atom has undergone a gamma decay.

In a gamma decay, no changes occur to the mass and atomic number of the substance.

Answer:

[tex]m=1.63\times 10^{-27}\ kg[/tex]

Explanation:

The velocity of a particle is 90% of the speed of light.

The wavelength of the particle is [tex]1.5\times 10^{-15}\ m[/tex]

We need to find the mass of the particle.

The formula for the wavelength of a particle is given by :

[tex]\lambda=\dfrac{h}{mv}[/tex]

h is Planck's constant

v is 90% of speed of light

m is mass of the particle

[tex]m=\dfrac{h}{\lambda v}\\\\m=\dfrac{6.63\times 10^{-34}}{1.5\times 10^{-15}\times 0.9\times 3\times 10^8}\\\\m=1.63\times 10^{-27}\ kg[/tex]

So, the mass of the particle is [tex]1.63\times 10^{-27}\ kg[/tex].

Answer:

hello your question has some missing parts

A juggler performs in a room whose ceiling is 3 m above the level of his hands. He throws a ball vertically upward so that it just reaches the ceiling.

answer : c) 0.39 sec

               d)  2.25 m

               e) 1.92 m/sec

Explanation:

The initial velocity of the first ball = 7.67 m/sec ( calculated )

Time required for first ball to reach ceiling = 0.78 secs ( calculated )

Determine how long after the second ball is thrown do the two balls pass each other

Distance travelled by first ball downwards when it meets second ball can be expressed as : d = 1/2 gt^2 =  9.8t^2 / 2

hence d = 4.9t^2  ----- ( 1 )

Initial speed of second ball = first ball initial speed = 7.67 m/sec

3 - d = 7.67t - 4.9t  ---- ( 2 )

equating equation 1 and 2

3 = 7.67t   therefore t = 0.39 sec

Determine how far the balls are above the Juggler's hands ( when the balls pass each other )

form equation 1 ;

d = 4.9 t^2 = 4.9 *(0.39)^2 = 0.75 m

therefore the height the balls are above the Juggler's hands is

3 - d = 3 - 0.75 = 2.25 m

determine their velocities when the pass each other

velocity = displacement / time

velocity = d / t = 0.75 / 0.39 sec  = 1.92 m/sec

Answer:

The importance of the sediments permeability is that if it is permeable, water will flow easily through the sediment and thereby produce a very good supply of water for the well.

Explanation:

When digging a well into saturated sediments, the possibility of the sediment with either little saturation or full saturation being able to provide steady water supply will be limited by how permeable it is. Now, the importance of the sediments permeability is that if it is permeable, water will flow easily through the sediment and thereby produce a very good supply of water for the well.

Corrected, it's 2) 200

Answer:

Answer is explained in the explanation section below.

Explanation:

Solution:

Data Given:

Electric Field between two parallel plates = 628 N/C

Separation = 4.22 cm

a) In this part, we are asked to calculate the distance from positive plate at which the electron and proton pass each other.

Solution:

First of all:

Force on proton due to the Electric field between the plates is:

[tex]F_{p}[/tex] = [tex]q_{p}[/tex]E

and, we know that, F = ma

So,

[tex]m_{p}[/tex]a = [tex]q_{p}[/tex]E

a = [tex]\frac{q_{p}.E }{m_{p} }[/tex]      Equation 1

So,

The distance covered by the electron is:

S = ut + 1/2[tex]at^{2}[/tex]

Here, u = 0.

S = 1/2[tex]at^{2}[/tex]

Put equation 1 into the above equation:

S = 1/2 x ([tex]\frac{q_{p}.E }{m_{p} }[/tex]  )[tex]t^{2}[/tex]      Equation 2

So,  

Similarly, the distance covered by electron will be:

(D-S) = 1/2 x ([tex]\frac{q_{e}.E }{m_{e} }[/tex]  )[tex]t^{2}[/tex]    Equation 3

We know that the charge of electron is equal to the charge of proton so,

[tex]q_{p}[/tex] = [tex]q_{e}[/tex] = q

By dividing the equation 2 by equation 3, we get:

[tex]\frac{S}{D-S}[/tex] = [tex]\frac{m_{e} }{m_{p} }[/tex]

Solve the above equation for S,

S[tex]m_{p}[/tex] = [tex]m_{e}[/tex]D - [tex]m_{e}[/tex]S

So,

S = [tex]\frac{m_{e}.D }{(m_{e} + m_{p}) }[/tex]

Plugging in the values,

As we know the mass of electron is 9.1 x [tex]10^{-31}[/tex] and the mass of proton is 1.67 x [tex]10^{-27}[/tex]

S = [tex]\frac{9.1 . 10^{-31} . 4.22 }{(9.1 . 10^{-31} + 1.67 . 10^{-27} }[/tex]

S = 0.002298 cm (Distance from the positive plate at which the two pass each other)

b) In this part, we to calculate distance for Sodium ion and chloride ion as above.

So,

we already have the equation, we need to put the values in it.

So,

S = [tex]\frac{m_{Cl}.D }{(m_{Cl} + m_{Na}) }[/tex]

As we know the mass of chlorine is 35.5 and of sodium is 23

S = [tex]\frac{35.5 . 4.22}{(35.5 + 23)}[/tex]

S = 2.56 cm

Answer:

a = 5 m/s^2

Explanation:

First, we look at Newton's 2nd Law:

F = ma

We now plug in the values,

10 N = 2 kg * a

10 N/2 kg = a

5 m/s^2 = a

Answer:

The Carnot engine has zero power

Explanation:

Although theoretically the Carnot engine has more efficiency than the real engine. In practice however they tend to have zero power.

This is because all its processes are reversible (that is isothermic and adiabatic).

So the system equilibrates with its surroundings at every point in time. This makes work done very slow and the power generated is zero.

Carnot cycles requires attaining isothermal heat transfers which is quite difficult and take a long time. Also a pump that can handle liquid-vapour phase mixture will be required.

This is not practical.

Answer:

V= -3.6*10⁻¹¹ V

Explanation:

      [tex]E* A = \frac{Q}{\epsilon_{0} } (1)[/tex]

       [tex]A = 4*\pi *r^{2} = 4*\pi *(0.3m)^{2} (2)[/tex]

      [tex]E = \frac{Q}{4*\pi *\epsilon_{0}*r^{2} } = \frac{(9e9N*m2/C2)*(-12C)}{(0.3m)^{2} y} (3)[/tex]

       [tex]V =E*r = E*(0.3m) = \frac{(9e9N*m2/C2)*(-12C)}{(0.3m)} = -3.6e11 V (5)[/tex]

The electrical potential module will be [tex]-3.6*10^-^1^1 V[/tex]

We can arrive at this answer as follows:

[tex]E*A=\frac{Q}{^E0} \\\\\\A=4*\pi*r^2[/tex]

[tex]E=\frac{Q}{4*\pi*^E0*r^2} \\E= \frac{(9e9N*m2/c2)*(-12C)}{(0.3m)^2y}[/tex]

[tex]V=E*r\\V=E*0.3m= \frac{(9e9N*m^2/C2)*(-12C)}{0.3m} \\V= -3.6*10^-^1^1 V.[/tex]

More information about Gauss' law at the link:

https://brainly.com/question/14705081

Answer:

1 kg

Explanation:

Assuming that,

Δx(2) = v(2)t, where Δx(2) = d and v(2) = 2m1 / (m1 + m2) v1i

On the other hand again, if we assume that

Δx(1) = v(1)t, where Δx(1) = -2d, and v(1)t = m1 - m2 / m1 + m2 v1i

From the above, we proceed to dividing Δx(2) by Δx(1), so that we have

d/-2d = [2m1 / (m1 + m2) v1i] / [m1 - m2 / m1 + m2 v1i], this is further simplified to

1/-2 = [2m1 / (m1 + m2)] / [m1 - m2 / m1 + m2]

1/-2 = 2m1 / (m1 + m2) * m1 + m2 / m1 - m2

1/-2 = 2m1 / m1 - m2, if we cross multiply, we have

m1 - m2 = -2 * 2m1

m1 - m2 = -4m1

m2 = 5m1

From the question, we're told that m1 = 0.2 kg, if we substitute for that, we have

m2 = 5 * 0.2

m2 = 1 kg

This question is incomplete, the complete question is;

According to information found in an old hydraulics book, the energy loss per unit weight of fluid flowing through a nozzle connected to a hose can be estimated by the formula; h= (0.04 to 0.09)(D/d)⁴V²/2g

where h is the energy loss per unit weight, D the hose diameter, d the nozzle tip diameter, V the fluid velocity in the hose, and g the acceleration of gravity.

Do you think this equation is valid in any system of units

Answer:

YES, the equation is a general equation that is valid in any system of units

Explanation:

Given the data in the question;

h = (0.04 to 0.09)(D/d)⁴ × [tex]\frac{V^{2} }{2g}[/tex]

so

[ N.m/N ] = (0.04 to 0.09) ( m/m)² × (m²/s²)1/2 × (s²/m)

[ N.L/N ] = (0.04 to 0.09) ( L⁴/L⁴) × (L²/T²)1/2 × (T²/L)

∴ [ L ] = (0.04 to 0.09) [L]

So as each term in the equation must have the same dimensions, the constant term (0.04 to 0.09) must be without dimension.

Therefore, YES, the equation is a general equation that is valid in any system of units