Answer:
TRUE
Explanation:
work and power!!
____is the measure of how much work, energy, or power is used or converted properly. Efficiency C Power b Newton d. Horsepower
Answer:
Efficiency
Explanation:
Un tren emite un sonido a 480hz determina la frecuencia que percibe el observador cuando el observador se aleja a 12m/s del tren que ha quedado en reposo velocidad del sonido en el aire 340m/s
Answer:
La frecuencia que percibe el observador es 463 Hz.
Explanation:
El efecto Doppler se define como el cambio de frecuencia aparente de una onda producida por el movimiento relativo de la fuente respecto a su observador. En otras palabras, este efecto es el cambio en la frecuencia percibida de cualquier movimiento ondulatorio cuando el emisor y el receptor, u observador, se desplazan uno respecto a otro.
La siguiente expresión se considera el caso general del efecto Doppler:
[tex]f'=f*\frac{v+-vR}{v-+vE}[/tex]
Donde:
f’, f: Frecuencia percibida por el receptor y frecuencia emitida por el emisor respectivamente. Su unidad de medida en el Sistema Internacional (S.I.) es el Hertz (Hz), que es la unidad inversa del segundo (1 Hz = 1 s-1) v: Velocidad de propagación de la onda en el medio. Es constante y depende de las características del medio. En este caso se considera que la velocidad del sonido en el aire es de 340 m/s vR, vE: Velocidad del receptor y del emisor respectivamente. Su unidad de medida en el S.I. es el m/s ±, ∓:Utilizaremos el signo +:
En el numerador si el receptor se acerca al emisor
En el denominador si el emisor se aleja del receptor
Utilizaremos el signo -:
En el numerador si el receptor se aleja del emisor
En el denominador si el emisor se acerca al receptor
En este caso:
f= 480 Hzv= 340 m/svR= 12 m/s (el receptor es el observador)vE=0 (el emisor es el tren, que se encuentra en reposo)Y como el receptor se aleja del emisor, la expresión del efecto Doppler queda determinada como:
[tex]f'=480 Hz*\frac{340 m/s-12 m/s}{340 m/s-+0 m/s}[/tex]
Resolviendo se obtiene:
[tex]f'=480 Hz*\frac{340 m/s-12 m/s}{340 m/s}[/tex]
[tex]f'=480 Hz*\frac{328 m/s}{340 m/s}[/tex]
f'= 463 Hz
La frecuencia que percibe el observador es 463 Hz.
What is the relationship between retar ding potential and the kinetic energy of the emitted photoelectrons?
Answer:
The kinetic energy of photoelectrons at the surface grows linearly with the increasing frequency of incident radiation. Measurements for all metal surfaces give linear plots with one slope.
What is the transfer of energy that occurs when a force causes an object to move?
O Energy
Force
Power
O Work
Answer:
huh? I think it's Power.....
What is the unit of energy called? (Give name and symbol)
which line represnts object moving fastest
**WILL MARK BRAINLEST ANSWER, IF RIGHT**
Line - A: (15/10) = 1.5 inch/second
Line - B: (0/10) = 0
Line - C: (10/10) = 1.0 inch/second
Line - D: (-25/20) = -1.25 inch/second
Line-A represents the greatest speed.
Hey guys, can you please help me with this question?
A rectangular container of base 50 cm by 30 cm is filled with water to a depth of 5 cm. How much is the pressure exerted at the base? (Take p= 1000 kg/m3 and g=10m/s)
Answer:
the pressure exerted at the base of the container is 490 N/m²
Explanation:
Given;
density of water, ρ = 1,000 kg/m³
base of the rectangular container, = 50 cm by 30 cm
height of water in the tank, h = 5 cm = 0.05 m
The pressure exerted at the base of the container is calculated as;
P = ρgh
where;
g is acceleration due to gravity = 9.8 m/s²
P = 1000 x 9.8 x 0.05
P = 490 N/m²
Therefore, the pressure exerted at the base of the container is 490 N/m²
Which chemical change describes the reactions of elements and compounds that, in general, do not involve carbon and typically take place in laboratories or industries?
Answer:
Inorganic.
Explanation:
The chemical change which describes the reactions of elements and compounds that, in general, do not involve carbon and typically take place in laboratories or industries is inorganic.
In Chemistry, an inorganic chemical reaction can be defined as a type of chemical reaction that occurs without a carbon-hydrogen bond.
On the other hand, organic chemistry deals with reaction that occur in the presence of carbon-hydrogen bonds such as hydrocarbons.
Please help!!! what is the main point of paragraph 3?
Some people today claim the Earth is flat. Produce an argument to prove that the
Earth is not flat.
Answer:
i mean i think it is. we have no real pics of the earth they are all fake. And the moon landing was fake. the usa flag was blowing but there is no wind in space . its all fake
Explanation:
To drive your car from Auburn to Atlanta (173.8 km) takes a significant amount of work. Assuming the force of friction between the tires and the road is 10290 N, how much work needed to drive that far? Express your answer in megajoules (MJ).
Answer:
1788.402 MJ
Explanation:
Work done = Force (N) x distance (m)
First we have to convert distance into metres:
173.8 x 1000 = 173,800 m
Then plug these values into the equation above:
173,800 x 10290 = 1788402000 J
The reason it's Joules (the unit for energy) is because work done = energy transferred
Now we have to convert Joules into Mega Joules:
1 J = 1/1000000 MJ
1788402000 J = 1788402000/ 1000000 = 1788.402 MJ
If the cells in a circuit are the wrong way around
why does it not work
2 mark explanation
I will mark brainliest
Answer:
By sarting it right and explain
Answer:
There is no current in a diode (in the reverse diode)
Explanation:
Charge willl not flow through a diode (in the reverse directiom)
BECAUSE A DIODE HAS A VERY HIGH RESISTANCE IN THE REVERSE DIRECTION
why the friction between an object and a surface is less than when the surface is titled than when the same surface is horizontal
Answer:
nvjch
ffufuxuhxjcjfbfdhdh
how do you find the focal length of an lens experimentally
Answer:
Place the convex lens on a 'V' stand. . ii) Light a candle and take it far away from the lens along the principal axis. iii) Adjust the screen on the other side of the lens to get a clear image on it. iv) Measure the distance between the 'V' stand and the screen which gives a rough idea of the focal length of the lens.
If I keep F constant in F=ma, what is the relationship between m and a?
Answer:
If F is a constant, we can take f = 1
f = m×a
ma = 1
therefore we can say that force is hence proportinal to the product of mass and acceleration.
What geologic process creates an alcove?
Group of answer choices
A. wind erosion
B.glaciation
C.tectonic uplift
D.coastal erosion
HELP PLEASE!!!!!!!!!!!!!!!
A particle was moving in a straight line at 172.8 km/hr. If it decelerated over 120 meters to come to rest, find the time taken to cover this distance.
Answer:
v=s/t
s=vt
t=s/v
t=(120×10‐³)/172.8
(the distance meters has been changed to kilometres)
t=1/1440 hrs
Given ,
A stone of mass 0.2kg is thrown vertically upwards from the ground with a velocity of 20m/s. Find the maximum height attained by the stone
Answer: 20.4 m
Explanation: speed v upward is v = vo -gt.
When maximum height v = 0, vo -gt = 0 and
T = vo / g = 20 m/s / 9.81 m/s² = 2.04 s
Now height y = vot -0.5 gt^2 = 20,4 m
This is possible to solve using
Conservation of energy Ek= Ep
0.5mv² = mgh. And h = v²/2g. Results same
A 2kg rock is dropped from a height of 10m and hits the ground going 11m/s. How much work was done by air resistance as it fell?
Answer: 0.24 kg/m
Explanation: use k = ρ * A * C / 2 as the formulaGiving Brainliest
Please help, Stay Safe and healthy
Answer: A I think
Explanation:
A ball is projected at an initial speed of 20.0 meter per second making an angle of 45.0 with horizontal. What is the maximum height it will reach?
Answer:
10.2 metres
Explanation:
Given that a ball is projected at an initial speed of 20.0 meter per second making an angle of 45.0 with horizontal. What is the maximum height it will reach?
Solution
To get the maximum height, let us use the formula
V^2 = U^2 sin^2ø - 2gH
At maximum height V = 0
U^2 sin^2ø = 2gH
Substitute all the parameters into the formula
20^2 ( sin 45 )^2 = 2 × 9.8 × H
400 × 0.5 = 19.6 H
Make H the subject of formula
H = 200 / 19.6
H = 10.204 metres.
Therefore, the maximum height reached by the projected ball is 10.2 metres.
please help meeee, I need help to complete my assignment
Does an object of a higher mass absorb more thermal energy than an object of lower mass?
6. _______________ : when a certain number of waves pass a given point for a certain number of seconds? Group of answer choices A. wavelength C. amplitude D. height B. frequency
Ill give brainly-ist.
Answer:
b
kakanandnanjsnMajdnAnnznnzkkzid
Answer:
Frequency
Explanation:
I just took that test
What causes "changing" motion?
Balanced forces
Unbalanced Forces
Steady Motion
The force
Answer:listen to class
Explanation:
-1
Answer:
Unbalanced Forces
Explanation:
According to the Newton's First law, it states that an object either remains at rest or continues to move at a constant velocity, unless it is acted upon by an external force. The answer is Unbalanced Forces
a) A 12 kg object has a velocity of 37.5 m/s. What is its momentum?
b) How far does it get in 16 s?
Answer:
The answer would be 450 m kg/s
Explanation/ Explanation / Example:
Provided an object traveled 500 meters in 3 minutes , to calculate the average velocity you should take the following steps: Change minutes into seconds (so that the final result would be in meters per second). 3 minutes = 3 * 60 = 180 seconds , Divide the distance by time: velocity = 500 / 180 = 2.77 m/s .
If this doesn't help let me know!
A car goes East from 2 m/s to 16m/s in 3.5s. What is the Car's acceleration?
Don't scroll down. Help pls 22 POINTS!!
Answer:
I don't know if these are all right but these are my best answers. good luck and I hope you do well.
1. true
2. true
3. false
4. true
5. true
6. true
7. true
8. true
9. false
10. false
13. it stimulates the heart through chest compressions
14. on bare skin upper right shoulder and lower left ribs
15. no CPR
Explanation:
Una muestra de agua de 250g de agua se caliento desde 10°C hasta 60°C calcula la cantidad de calor absorbido por el agua el calor especifico del agua es de 4186J/Kj.K
Answer:
Calor absorbido, Q = 52325 Joules
Explanation:
Dados los siguientes datos;
Masa = 250g to kg = 250/1000 = 0.25kg
Temperatura inicial, T1 = 10°C to Kelvin = 273 + 10 = 283K
Temperatura final, T2 = 60°C to Kelvin = 273 + 60 = 333K
Capacidad calorífica específica = 4186 j/kg.K.
Para encontrar la cantidad de calor necesaria;
La capacidad calorífica viene dada por la fórmula;
[tex] Q = mct [/tex]
Dónde;
Q representa la capacidad calorífica o la cantidad de calor.
m representa la masa de un objeto.
c representa la capacidad calorífica específica del agua.
dt representa el cambio de temperatura.
dt = T2 - T1
dt = 333 - 283
dt = 50 K
Sustituyendo en la fórmula, tenemos;
[tex] Q = 0.25*4186*50[/tex]
[tex] Q = 52325 [/tex]
Calor absorbido, Q = 52325 Joules
What does the diagram show about phases and the phase of the substance as it is heated? Check all that apply.
(ANSWERED)
The substance is a gas at more than 2,000°C.
The particles are close together but move in different directions between 0°C and 2,200°C.
The attractions between the particles increase in region 2.
The speed of the particles increases in region 5.
The substance does not exist as a solid.
(the answer is B and D) got a 100
Answer:
2 and 4
Explanation:
right on edge
Answer:
can confirm its 2 and 4
Explanation: