poste en français s’il vous plaît
Which of the following parallel plate diagrams would have the greatest electric fields between them?
The greatest electric field between them is Option B.
An electric field is the physical subject that surrounds electrically charged particles and exerts a force on all other charged debris inside the area, either attracting or repelling them. It also refers back to the bodily field of a machine of charged particles.
Reasoning:-
Electric field = Kq/r²
Since the distance is inversely proportional to the square root of the distance between them. therefore decreasing the distance electric field will be the greatest. Hence Option B.
The electrical field is defined mathematically as a vector discipline that can be related to each point in space, the force in step with unit charge exerted on a fine take a look at the price at rest at that factor. the electric field is generated by the electrical rate or through time-varying magnetic fields. electric fields provide us with the pushing force we need to set off the contemporary float.
Learn more about electric fields here:-https://brainly.com/question/14372859
#SPJ1
How much work is done in pushing an object 7.0 m across a floor with a force of 50 N and then
pushing it back to its original position? How much power is used if this work is done in 20 sec?
Answer:
35/2 J/s
Explanation:
Just use the 2 formulas
Work done = Force * distance moved
Power = Work done/time
WD = 7 * 50 = 350
Power = 350 / 20
= 35/2 J/s
We observe that a moving charged particle experiences no magnetic force. From this we can definitely conclude that: (A) No magnetic field exists in that region of space. (B) The particle must be moving parallel to the magnetic field. (C) Either no magnetic field exists or the particle is moving parallel to B. (D) Either no magnetic field exists or the particle is moving vertical (perpendicular) to B.
Answer:
(C) Either no magnetic field exists or the particle is moving parallel to B.
Explanation:
The moving charged particle tends to show no magnetic forces. Due to its moving in the same direction and will be parallel to the field. As when the magnetic fed and charged particle velocity is parallel then there will be no force. As the magnetic field are made by the generation of the current with the field line concentric to the current-carrying wire.can someone pls tell me what a force diagram is
Constructive interference occurs when the crest of 2 waves meet. This can occur when 2 troughs meet as well. When this occurs, water waves look
A- the same (no change)
B- larger
C- invisible
D- smaller
Answer:
B; LargerExplanation:
I took the K-12 quiz, and that was the correct answer. Hope this helped!A 744 N force is applied to an object to reach an acceleration of 24 m/s2. What is the objects mass?
31kg
Explanation:
F = ma
m = F/a
m = 744N/24m/s^2
m = 31kg
(*Newton's Second Law*)
An airplane of mass 13300 kg is flying in a straight line at a constant altitude and with a speed of 560.0 km/hr. The force that keeps the airplane in the air is provided entirely by the aerodynamic lift generated by the wings. The direction of this force is perpendicular to the wing surface. Calculate the magnitude of the lift generated by the wings of this airplane.
Answer:
The magnitude of the lift generated by the wings of the airplane is 130,340 N.
Explanation:
Given;
mass of the airplane, m = 13,300 kg
speed of the airplane, v = 560 km/h = 155.56 m/s
The magnitude of the lift generated by the wings of the airplane is calculated as;
[tex]F_l = mg\\\\where;\\\\F_l \ is \ the \ magnitude \ of \ the \ lift \ generated\\g \ is \ acceleration \ due \ to \ gravity = 9.8 \ m/s^2\\\\F_l = 13,300 \times \ 9.8\\\\F_l = 130,340 \ N[/tex]
Therefore, the magnitude of the lift generated by the wings of the airplane is 130,340 N.
Electromagnetic waves used in cell phones are called
a. radio waves
b.microwaves
c. Gamma rays
d. Ultraviolet rays
Answer:
A.Radio waves
Explanation:
If you wrap 150 coils of heavy wire around a big iron nail and attach the ends of the wire to a 6.0v battery, you have a A) radio B) electromagnet C) galvanometer D) ammeter
Answer:
B
Explanation:
Because of the voltage attached to the iron nail
which two options describes behaviors of particles that are related to the chemical properties of the materials
a- forming hydrogen bonds between them
b- reacting quickly with water
c- having a high mass
d- forming bonds with other atoms
Answer:
The two correct answers are B.) reacting quickly with water, and D.) forming bonds with other atoms.
Explanation:
I took the quiz on a.pex and these were correct.
At the end of the previous experiment, aclumsy scientist drops the coil, while still in the magnetic field, and still oriented with its plane perpendicular to the magnetic field, denting it and changing its shape to a semi-circle. The new shape has the same perimeter, but a different area, and it takes 0.036s to deform. What isthe average induced EMF during this mishap
Answer:
hello your question has some missing parts below are the missing parts
A Circular, 10-turn coil has a radius of 10.7 cm and is oriented with its plane perpendicular to a 0.2-T magnetic field.
answer : 1 volt
Explanation:
Determine the Average induced EMF during this mishap
A' = A/2 ( for a semi circle )
where A = [tex]\frac{\pi r^2}{2}[/tex]
To determine the Average induced EMF apply the relation below
| E | = η * [tex]\frac{\beta A}{T}[/tex] ----- ( 1 )
Replace A in equation 1 with A = [tex]\frac{\pi r^2}{2}[/tex]
hence equation becomes : | E | = η * βπr^2 / 2T'
where : T' = 0.0365 , β = 0.2 , η = 10 , r = 0.107
∴| E | = 0.999 ≈ 1volts
Calculate the amount of torque of an object being pushed by 6 N force along a circular path of a radius of 1x10^-2 mat 30 degree angle.
Answer:
The amount of torque is 0.03 N.m.
Explanation:
To find the amount of torque we need to use the following equation:
[tex] \tau = \vec {r} \times \vec{F} = rFsin(\theta) [/tex] (1)
Where:
r: is the radius = 1x10⁻² m
F: is the force = 6 N
θ: is the angle = 30°
By entering the above values into equation (1) we have:
[tex]\tau = 1 \cdot 10^{-2} m*6 N*sin(30) = 0.03 N.m[/tex]
Therefore, the amount of torque is 0.03 N.m.
I hope it helps you!
A beam of protons is directed in a straight line along the z direction through a region of space in which there are crossed electric and magnetic fields The electric field is 550 V m in the y direction and the protons move at a constant speed of 105 m s 1 What must be the magnitude of the magnetic field such that the beam of protons continues along its straight line trajectory Express your answer using two significant figures
Answer:
B = 5.23 T
Explanation:
Given that,
Electric field, E = 550 V/m
The speed of the proton, v = 105 m/s
We need to find the magnitude of the magnetic field such that the beam of protons continues along its straight-line trajectory.
To move in a straight line, the magnitude of the electric force from the field and the magnetic field must be equal i.e.
[tex]qE=qvB\\\\B=\dfrac{E}{v}\\\\B=\dfrac{550}{105}\\\\B=5.23\ T[/tex]
So, the magnitude of the magnetic field is equal to 5.23 T.
A5 N object at a height has gravitational potential energy of 30 J. What is the height of the object?
30=5×h then divide both sides by 5 you will get h=6m
If a 5 N object at a height has a gravitational potential energy of 30 J , then the height of the object would be 6 meters.
What is mechanical energy?Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total potential energy stored energy in the system which is represented by total potential energy.
As given in the problem a 5 N object at a height has gravitational potential energy of 30 J, then we have to find the height of the object.
Similarly, the total gravitational potential energy of the object,
PE = m × g × h
30 = 5 × h
h = 30 / 5
h = 6 meters
Thus, if a 5 N object at a height has a gravitational potential energy of 30 J, then the height of the object would be 6 meters.
To learn more about mechanical energy from here, refer to the link given below ;
brainly.com/question/12319302
#SPJ2
On a spaceship designed to support a multiyear voyage to the outer planets of the solar system, plants will be grown to provide oxygen and to recycle carbon dioxide. Because the spaceship will be so far from the sun, an artificial light source will be needed to support photosynthesis. Which wavelengths of light should be used to maximize plant growth?
Answer:
A mixture of blue & red light.
Explanation:
During photosynthesis, the oxygen delivered emanates from water particles and if a weighty isotope of oxygen atom was noticed in delivered sub-atomic oxygen, the water atoms were marked with the hefty isotope.
In order to maximize the growth rate of the plant, the required wavelength of light to be used is a mixture of blue & red light. This is on the grounds that as the absorption optima of plant's photoreceptors are at wavelength frequency of red and blue light, subsequently the combination of red and blue light would be ideal for plant growth and development.
The productivity of red (650–665 nm) LEDs on plant development is straightforward on the grounds that these wavelength frequencies entirely fit with the retention pinnacle of chlorophylls and phytochrome, while the enhanced blue light presented the possibility that development under regular light could be mirrored utilizing blue and red LEDs with negligible use of energy.
Two copper rods are rubbed together will they become charged
Answer:
Explanation:When insulating materials rub against each other, they may become electrically charged . Electrons , which are negatively charged, may be 'rubbed off' one material and on to the other. The material that gains electrons becomes negatively charged.
1. Budding is a way that some very tiny organisms can reproduce.
True
False
____________________________________
Male-female reproduction needs two parent cells to begin.
True
False
Answer:1.. true 2 false
Explanation:
Tom has a mass of 50,000 g and runs up a flight of stairs 4 m high in 12.5 seconds.
Calculate Tom’s power. (g = 10 m/s2)
Answer:
160 watts.
Explanation:
Remark
Power = Work / Time
Work = F * d
Note: Since he is running up stairs he is doing work against gravity.
Givens
m = 50000 g kg / 1000 grmsm = 50000 / 1000 = 50 kgh = 4 mtime = 12.5 secondsg = 10 m/s^2Formula
P = W * d/tW = m*g *d / tSolution
P = 50kg * 10 m/s^2 * 4 m / 12.5 P = 160 watts.
30. Easy Guided Online Tutorial One object is at rest, and another is moving. The two collide in a one-dimensional, completely inelastic collision. In other words, they stick together after the collision and move off with a common velocity. Momentum is conserved. The speed of the object that is moving initially is 25 m/s. The masses of the two objects are 3.0 and 8.0 kg. Determine the final speed of the two-object system after the collision for the case when the large-mass object is the one moving initially and the case when the small-mass object is the one moving initially.
Answer:
[tex]18.18\ \text{m/s}[/tex]
[tex]6.82\ \text{m/s}[/tex]
Explanation:
[tex]m_1[/tex] = Mass of large object = 8 kg
[tex]m_2[/tex] = Mass of smaller object = 3 kg
When large mass is moving
[tex]u_1[/tex] = 25 m/s
[tex]u_2[/tex] = 0
For completely inelastic collision we have the relation
[tex]m_1u_1+m_2u_2=(m_1+m_2)v\\\Rightarrow v=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\\\Rightarrow v=\dfrac{8\times 25+3\times 0}{8+3}\\\Rightarrow v=18.18\ \text{m/s}[/tex]
Speed of the combined mass when the larger object is moving is [tex]18.18\ \text{m/s}[/tex]
When smaller mass is moving
[tex]u_1[/tex] = 0
[tex]u_2[/tex] = 25 m/s
[tex]v=\dfrac{m_1u_1+m_2u_2}{m_1+m_2}\\\Rightarrow v=\dfrac{8\times 0+3\times 25}{8+3}\\\Rightarrow v=6.82\ \text{m/s}[/tex]
Speed of the combined mass when the smaller object is moving is [tex]6.82\ \text{m/s}[/tex]
Which device increases or decreases voltage as electricity is transmitted from power plants to homes and businesses?
generator
power line
transformer
turbine
Answer:Transformer
Explanation:All the other devices generate their own electricity apart from power line and Transformer, power line just carries electricity. A transformer can be used to step up or step down voltages from a source.
Answer:
transformer!! :)
Explanation:
A person drops a pebble of mass m1 from a height h, and it hits the floor with kinetic energy KE. The person drops another pebble of mass m2 from a height of 4h, and it hits the floor with the same kinetic energy KE. How do the masses of the pebbles compare
Hello,
QUESTION)✔ We have: KE = PE (potential energy)
PE = m x g x h
The potential energy that the pebble of mass 1 has is called PE1 and the potential energy that the pebble of mass 2 has is called PE2
PE1 = PE2 ⇔ PE1/PE2 = 1
[tex]\frac{m_1\times g\times h}{m_2\times g\times 4h} = 1 \\ \\ \frac{m_1}{m_2\times 4} = 1 \\ \\ \frac{m_1}{m_2} = 4[/tex]
The mass m1 is therefore 4 times greater than that of the stone of mass m2.
Which of the following would produce the most power?
b
ОООО
A mass of 10 kilograms lifted 10 meters in 10 seconds
A mass of 5 kilograms lifted 10 meters in 5 seconds
A mass of 10 kilograms lifted 10 meters in 5 seconds
A mass of 5 kilograms lifted 5 meters in 10 seconds
d
Answer:
A mass of 10 kilograms lifted 10 meters in 5 seconds.
Explanation:
Power can be defined as the energy required to do work per unit time.
Mathematically, it is given by the formula;
[tex] Power = \frac {Energy}{time} [/tex]
But Energy = mgh
Substituting into the equation, we have
[tex] Power = \frac {mgh}{time} [/tex]
Given the following data;
Mass = 10kg
Height = 10m
Time = 5 seconds
We know that acceleration due to gravity is equal to 9.8 m/s²
[tex] Power = \frac {10*9.8*10}{5} = 490 Watts [/tex]
Hence, a mass of 10 kilograms lifted 10 meters in 5 seconds would produce the most power.
PLEASE HELP ASAP!!!
An object has a kinetic energy of 50 J and a velocity of 5 m/s, what is the mass of the
object?
A. 4 kg
B. 55 kg
С. 10 kg
D. 1 kg
Answer:
0.5mv^2=50, v=5, 25/2×m=50, m=50×2/25, So, the answer is 4
BRAINLEST FOR CORRECT ANSWER PLEASE
Which has more momentum: a 3 kg sledgehammer swung at 1.5 m/s OR a 4 kg sledgehammer swung at 0.9 m/s? SHOW YOUR WORK
Answer:
Sledgehammer A has more momentum
Explanation:
Given:
Mass of Sledgehammer A = 3 Kg
Swing speed = 1.5 m/s
Mass of Sledgehammer B = 4 Kg
Swing speed = 0.9 m/s
Find:
More momentum
Computation:
Momentum = mv
Momentum sledgehammer A = 3 x 1.5
Momentum sledgehammer A = 4.5 kg⋅m/s
Momentum sledgehammer B = 4 x 0.9
Momentum sledgehammer B = 3.6 kg⋅m/s
Sledgehammer A has more momentum
In 1994, Leroy Burrell of the United States set what was then a new world record for the men’s 100 m run. He ran the 1.00 102 m distance in 9.5 s. Assuming that he ran with a constant speed equal to his average speed, and his kinetic energy was 3.40 103 J, what was Burrell’s mass?
Answer:
61.33 Kg
Explanation:
From the question given above, the following data were obtained:
Distance = 1×10² m
Time = 9.5 s
Kinetic energy (KE) = 3.40×10³ J
Mass (m) =?
Next, we shall determine the velocity Leroy Burrell. This can be obtained as follow:
Distance = 1×10² m
Time = 9.5 s
Velocity =?
Velocity = Distance / time
Velocity = 1×10² / 9.5
Velocity = 10.53 m/s
Finally, we shall determine the mass of Leroy Burrell. This can be obtained as follow:
Kinetic energy (KE) = 3.40×10³ J
Velocity (v) = 10.53 m/s
Mass (m) =?
KE = ½mv²
3.40×10³ = ½ × m × 10.53²
3.40×10³ = ½ × m × 110.8809
3.40×10³ = m × 55.44045
Divide both side by 55.44045
m = 3.40×10³ / 55.44045
m = 61.33 Kg
Thus, the mass of Leroy Burrell is 61.33 Kg
Match the descriptions with the graphs !
Answer:
Graph 1 matches with B, 2 with A, and 3 with C.
Explanation:
Graph 2 shows a car whose distance part of the graph is not going up or down, while the time going up. That means that the car is stopped. Graph 1 shows a straight line, meaning that the car is traveling at a constant speed. Graph 3 is a curved line, meaning the speed of the car is changing somehow, and since the line is becoming more horizontal, the car is getting slower.
50 points help please
Answer:
C?
Explanation:
Yep,It's C all right.
Answer:
Yep,It's C all right.
Explanation:
If a force is applied, but the object does
not move, what can we say about the
amount of work that is done?
A. Some work is done.
B. No work is done.
C. The work equals the force.
D. A large amount of work is done.
Answer:
doesn't move, no work is done; if a force is applied and the object moves a distance d in a direction other than the direction of the force, less work is done than if the object moves a distance d in the direction of the applied.
Answer:
B. No work is done.
Explanation:
Work is only done when the object moves in the direction of the force.
Badll
Which of the following is an example of
the Law of Inertia?
A. Sitting in a chair and breaking it
B. Throwing a ball in outer space and it goes on forever
unless acted upon by another force
C. Eating a salad to bring chemical energy into the body
D. Driving a car on a track
The way you change the speed of a wave is to:
a
Change it's medium
b
Change it's energy
c
Transfer it to a new position
d
Apply a force
Answer:
transfer it to a new position