% m/v of the solution = 0.2%m/v
Further explanation[tex]\tt Percent~m/v=\dfrac{mass~solute(g)}{volume~solution(ml)}\times 100\%[/tex]
or
% m/v = g solute / 100 ml solution
Concentration : 2 g sodium borate / L water
For 10 L⇒20 g Sodium borate
[tex]\tt \%m/v=\dfrac{20~g}{10,000~ml}\times 100\%\\\\\%m/v=0.2\%[/tex]
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY!
Is the following picture an example of a chemical change or a physical change?
A chemical change, because the atoms are rearranging to form new molecules.
A physical change, because the molecules are staying the same.
A chemical change, because the molecules are staying the same.
A physical change, because the atoms are rearranging to form new molecules.
Answer:
It would be a physical change, because the atoms are rerranging to form new molecules!
Explanation:
I WILLL GIVE YOU BRAINLYESTTT PLEASE HELPPPP
Answer:
10.99s
Explanation:
Given parameters:
Speed of the fly = 9.1m/s
Distance flown = 100m
Unknown:
Time taken to fly this distance = ?
Solution:
Speed is distance divided by the time;
Mathematically;
Speed = [tex]\frac{distance}{time}[/tex]
Time = [tex]\frac{distance}{speed }[/tex]
Insert the parameters and solve;
Time = [tex]\frac{100}{9.1}[/tex] = 10.99s
How did the substance oxygen change the world??
Answer: The atmosphere of Earth wasn't always full of oxygen. ... An accidental mutation would some day change the world forever as these organisms would become able to feed off of the sunlight around them, and produce oxygen in a process known as photosynthesis. This oxygen, which none of these organisms could use, was toxic.
What causes rain to precipitate from clouds?
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation: Have a blessed day!
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation:hope this helps u
Help plz:))) I’ll mark u brainliest
ASAP!!!
Answer:
rank from lower to higher electronegativity
16)Li
C
N
17)Ne
C
O
18)Si
P
O
19)K
Mg
P
20)He
S
F
12.
Contrast and compare:
a) ionic and covalent bonding
Answer:
Ionic bonds - an intramolecular force exist in a nonmetal and metal compounds such as NaCl. The Na donate 1 electon to Cl to complete its octet rule.
Covalent bond - an intramolecular force exist in a nonmetal and nonmetal compounds such as bonds O2, Cl2, CO2, sugar, proteins and most of organic compounds and biomolecules by sharing electrons to bond.
There are two types of covalent bonds: polar and nonpolar. Polar bond is a bond between two different nonmetal atoms of different electronegativities. While nonpolar bond is a bond between the same atom or two differenct atoms of the same electronegativities (if there is). Their electronegativities pull will cancel so that their overall polarity is zero.
How do I graph these question
a. Explain why bicycle tires seem higher in the summer than in winter.
b. Explain why a can of soda pop explodes if left in the hot sun.
c. A rigid container filled with a gas is placed in ice (ex. nalgene bottle). What will happen to the pressure of the gas? What do you think will happen to the volume?
d. An infected tooth forms an abscess* that fills with gas. The abscess puts pressure on the nerve of the tooth, causing a toothache. While waiting to see a dentist, the person with the toothache tried to relieve the pain by treating the infected area with moist heat. Will this treatment help? Why or why not?
The sum of the protons and neutrons in an atom equals the?
nucleus number
atomic number
atomic mass
mass number
Answer:
mass number
Explanation:
The sum of the protons and neutrons in an atom equals the mass number of such an atom.
Mass number is the mass of an atom. The mass of an atom is concentrated in the nucleusThe particles in the nucleus are the protons and neutrons.So;
Mass number = number of protons + number of neutrons.
How is the pH of an acidic substance raised?
1) Dilute it.
2) freeze it.
3) Stir it.
4) Concentrate it.
Answer: 4) Concentrate it
Explanation:
Which is more electrically negative? 1)C 2)P or 3)S
GUYS PLEASE HELP!!! :((
Answer:
3 sulphur is more electrically –
In your own words, please explain how to name acids.
Answer:
Acids are named based on their anion — the ion attached to the hydrogen. In simple binary acids, one ion is attached to hydrogen. Names for such acids consist of the prefix “hydro-“, the first syllable of the anion, and the suffix “-ic”. Complex acid compounds have oxygen in them.
Describe in your own words how the earth's layers were formed.
The layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth. After a long duration, a new layer is spread over the older layer, and so on.
What are the different layers of the earth?The different layers of the earth are as follows:
The Inner Core: This is the first layer from the center of the earth. The Outer Core: It is found after the inner core. The Mantle: It is the middle layer of the earth. The Crust: It is the outermost layer of the earth.The above-mentioned layers of the earth were formed with the impact of the building blocks of the earth that are remarkably known as Planetesimals, collided, and collapsed.
During that time, the hardest elements like nickel, iron, etc. constitute the core while the lighter elements like carbon, oxygen, silicon, etc. play an essential role in the formation of crust and mantle.
Therefore, the layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth.
To learn more about The layers of the earth, refer to the link:
https://brainly.com/question/10430823
#SPJ2
Can someone help? Ill give brainliest!
Directions: count each side of the reaction. Circle yes or no if it follows the law of conservation of mass
Answer:
Yes, it becomes 2 of H20 which is water
Under a certain set of conditions, the percent yield of a reaction that produces carbon dioxide is 75.0%. What mass in grams of CO2 will actually be recovered if the theoretical yield is 26.7 grams?
Answer:
Actual yield = 20.03g
Explanation:
[tex]% yield = 100.\frac{actual yield}{theoretical yield}[/tex]% [tex]yield[/tex] = [tex]100. \frac{actual \ yield}{theoretical \ yield}[/tex]
Actual yield = % yield.(theoretical yield) / 100
Actual yield = 75.26.7/100
Actual yield = 20.025
Answer: I got 20.025 and then I rounded it to 20.0
Explanation:
What igneous rock is non-vesicular and glassy in texture and has a mafic composition?
Answer:
igneous rock
Explanation:
A bus travels a distance 150km
in 5 hours where as another bus travel 200km in
6 hours which bus travel fast
Answer: The bus traveling 200km in 6 hours is traveling the fastest.
Explanation:
Bus 1
150km/5hrs
Simplify -> 30km/hr
Bus 2
200km/6hrs
Simplify -> About 33.333km/hr
Benzoic acid, C6H5COOH, is another derivative of benzene. The pH of an aqueous solution of benzoic acid at 298 K is 2.95. Determine the concentration of hydroxide ions in the solution,
Answer:
[OH⁻] = 8.91x10⁻¹²M
Explanation:
In aqueous solutions, the [OH] and [H⁺] are associated in the equation of hydrolisis of water:
1x10⁻¹⁴ = [OH⁻] [H⁺]
With pH, we can solve for [H⁺] and obtain, the [OH⁻] using this equation:
pH = -log [H⁺]
[H⁺]= 10^-pH
[H⁺] = 1.122x10⁻³M
1x10⁻¹⁴ = [OH⁻] [1.122x10⁻³M]
[OH⁻] = 8.91x10⁻¹²M1.Which statement(s) is/are true about a divergent plate boundary? Check all that apply.
A.new crust is created here
B.an ocean trench is found here
C.a rift valley is associated with this boundary
D.subduction occurs at this boundary
E.a mid-ocean ridge is found at this boundary
F.San Andreas is an example of this type of boundary
G.sea floor spreading occurs here
--------------------------------------------------------------------------------------------------------------------------------
2.Which statement(s) is/are true about a transform plate boundary? Check all that apply.
A.an ocean trench is found here
B.earthquakes frequent this boundary
C.subduction occurs at this boundary
D.two plates are sliding past each other
E.San Andreas is an example of this type of boundary
F.an ocean trench is found here
--------------------------------------------------------------------------------------------------------------------------------
3.Which statement(s) is/are true about a convergent plate boundary? Check all that apply.
an ocean trench is found here
a rift valley is associated with this boundary
subduction occurs at this boundary
volcanic island chain might occur here
folded mountains might form here
earthquakes might occur here
San Andreas is an example of this type of boundary
--------------------------------------------------------------------------------------------------------------------------------
SINCE THIS IS ALOT OF THINKING I AM GIVING A GOOD AMOUT OF POINTS.....
PLEASE DONT SCAM AND STEAL THE POINTS
Answer:
I know the first one is c or e but i not sure what the others are, the second one is- wait are you sure your in 6th grade lol? I dont remember learning this
Answer:
OMG ITS MEHH
Explanation:
If all objects masses are the same, then the object with the least ___ is the densest?
Possible Answers:
A: Mass
B: Volume
C: Weight
D: Density
Answer:
its weight
Explanation:
mass is how much space it takes up the volume stays the same density is what happens after so its weight
periodic table of elements
Vertical Column is a group
Horizontal is Period
Aliki earth metals is a group
Lithium- Neon is both
Based on electrons are both
Number of electron shells is both
how do i do the chemicals
you have to put them togeter
A very hot cube of copper metal (32.5 g) is submerged into 105.3 g of water at 15.4 0C and it reach a thermal equilibrium of 17.3 0 Calculate the initial temperature of copper (Cs = 0.385 J/g 0C for copper, and 4.18 J/g 0C for water).
Answer:
The initial temperature of the metal is 84.149 °C.
Explanation:
The heat lost by the metal will be equivalent to the heat gain by the water.
- (msΔT)metal = (msΔT)water
-32.5 grams × 0.365 J/g°C × ΔT = 105.3 grams × 4.18 J/g °C × (17.3 -15.4)°C
-ΔT = 836.29/12.51 °C
-ΔT = 66.89 °C
-(T final - T initial) = 66.89 °C
T initial = 66.89 °C + T final
T initial = 66.89 °C + 17.3 °C
T initial = 84.149 °C.
Which chemical equation is balanced?
A. CaO2 + HCl → CaCl2 + H20
B. CO2 + H2O + H2CO2
C. K+ H2O → K20 + H2
D. MgO + 2HCI – MgCl2 + H20
10 points if you answer fast
D. MgO + 2HCI – MgCl2 + H20
Further explanationThe chemical equation is said to be balanced if the number of atoms in the reactants is equal to the number of atoms in the product
A. CaO2 + HCl → CaCl2 + H20
atoms O, Cl and H are not the same
B. CO2 + H2O + H2CO2
atoms O are not the same
C. K+ H2O → K20 + H2
atoms K are not the same
D. MgO + 2HCI – MgCl2 + H20
Mg, left = 1, right=1
O, left=1, right=1
H, left=2, right=2
Cl, left=2, right=2
Chemical equation is balanced
Answer:
B. CO2 + H2O + H2CO2
Explanation:
3.) All matter has both physical and chemical properties. A physical property is one that does not change the chemical nature of matter. Which of these choices is a physical property?
A.) height
B.) flammability
C.) ability to rust
D.) reaction with water
Answer:
D
Explanation:
It would be D because you are observing the reaction and don’t change anything
helppppp. which of the following statements regarding physical and chemical changes is true? a. both physical and chemical changes alter the atomic structure of a substance. b. neither physical not chemical changes alter the atomic structure of a substance. c. physical changes alter the atomic structure of a substance, while chemical changes do not. d. chemical alter the atomic structure of a substance, while physical changes do not. huryyyy
Answer:
B
Explanation:
I did it
Neither physical not chemical changes alter the atomic structure of a substance. The correct option is b.
What are chemical changes?When one chemical substance is transformed into one or more different substances, such as when iron becomes rust, a chemical change occurs.
Chemical changes occur as a result of chemical reactions, and the resulting substances have different properties due to the different arrangements of their atoms and molecules.
Physical changes affect a chemical substance's form but not its chemical composition.
Physical changes can be used to separate mixtures into their component compounds, but not to separate compounds into chemical elements or simpler compounds.
Physical or chemical changes have no effect on a substance's atomic structure.
Thus, the correct option is b.
For more details regarding chemical changes, visit:
https://brainly.com/question/23693316
#SPJ6
How can air quality be fine on one day and hazardous on the next? What
are some things that can cause a rapid change in air quality? *
Answer:
Air Current
Explanation:
Say I am in California and there is a massive fire next to me but not close enough to me to really see the fire and the next day I see no fire but theres a ton of ash in the sky, this can be due to the wind current taking the smoke from the fire into my direction and that smoke falling in my area. So basically a wind current can take the smoke from a fire into another destination and cause a rapid change in air quality in a day.
Potato strips placed in a container of concentrated salt water will ultimately __.
Answer:
00000
Explanation:
someone help me please i’ll give brainly
Answer:
D) All of the above
Explanation:
When the temperature of an object increases, the average kinetic energy and speed of its particles increases. When the average kinetic energy of its particles increases, the object's thermal energy increases. Therefore, the thermal energy of an object also increases as its temperature increases.
Air is trapped in a cylinder fitted with a piston that occupies 150.5 mL at 1.12 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 15%?
Answer:
New volume V2 = 120.4 ml
Explanation:
Given:
Pressure P1 = 1.12 atm
New pressure P2 = 1.12[1+0.25] = 1.4 atm
Old volume V1 = 150.5 ml
Find:
New volume V2
Computation:
P1V1 = P2V2
(1.12)(150.5) = (1.4)(V2)
V2 = 120.4 ml
New volume V2 = 120.4 ml
A wave is a _____that transfers _____ through a ______
A.) medium, disturbance, energy
B.) disturbance, energy, medium
C.) energy, disturbance, medium
D.)disturbance, medium, energy
A wave is a disturbance that transfers energy through a medium. There
are types of such as sound and light waves.
A wave involves the transfer of energy such as sound, light waves etc
through a medium. The medium could be through liquids , solids or air and
they have characteristic waves which pass through them.
When a wave transfers energy through a medium, the matter involved
doesn't experience any type of movement.
Read more on https://brainly.com/question/19210453